diff mbox series

[9/9] arm64: dts: ipq8074: Fixup pcie dts nodes

Message ID 1593940680-2363-10-git-send-email-sivaprak@codeaurora.org (mailing list archive)
State Superseded, archived
Headers show
Series Add PCIe support for IPQ8074 | expand

Commit Message

Sivaprakash Murugesan July 5, 2020, 9:18 a.m. UTC 
ipq8074 pcie nodes missing several properties which is needed to make
them work add these properties.

Co-developed-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@codeaurora.org>
Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/ipq8074-hk01.dts |   8 +--
 arch/arm64/boot/dts/qcom/ipq8074.dtsi     | 109 ++++++++++++++++++++----------
 2 files changed, 78 insertions(+), 39 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
index 6754cb0638f4..dfb8ad73f134 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -52,19 +52,19 @@ 
 
 &pcie0 {
 	status = "ok";
-	perst-gpio = <&tlmm 61 0x1>;
+	perst-gpio = <&tlmm 58 0x1>;
 };
 
 &pcie1 {
 	status = "ok";
-	perst-gpio = <&tlmm 58 0x1>;
+	perst-gpio = <&tlmm 61 0x1>;
 };
 
-&pcie_phy0 {
+&qmp_pcie_phy0 {
 	status = "ok";
 };
 
-&pcie_phy1 {
+&qmp_pcie_phy1 {
 	status = "ok";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 5303821300b4..5bb58b70199e 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -82,34 +82,66 @@ 
 		ranges = <0 0 0 0xffffffff>;
 		compatible = "simple-bus";
 
-		pcie_phy0: phy@86000 {
-			compatible = "qcom,ipq8074-qmp-pcie-phy";
-			reg = <0x00086000 0x1000>;
-			#phy-cells = <0>;
-			clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
-			clock-names = "pipe_clk";
-			clock-output-names = "pcie20_phy0_pipe_clk";
+		qmp_pcie_phy0: phy@84000 {
+			compatible = "qcom,ipq8074-qmp-pcie-gen3-phy";
+			reg = <0x00084000 0x1bc>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_PCIE0_AUX_CLK>,
+				 <&gcc GCC_PCIE0_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
 
 			resets = <&gcc GCC_PCIE0_PHY_BCR>,
-				<&gcc GCC_PCIE0PHY_PHY_BCR>;
+				 <&gcc GCC_PCIE0PHY_PHY_BCR>;
 			reset-names = "phy",
 				      "common";
+
 			status = "disabled";
+			pcie_phy0: lane@84200 {
+				reg = <0x84200 0x16c>, /* Serdes Tx */
+				      <0x84400 0x200>, /* Serdes Rx */
+				      <0x84800 0x4f4>; /* PCS: Lane0, COM, PCIE */
+				#phy-cells = <0>;
+
+				clocks = <&gcc GCC_PCIE0_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "gcc_pcie0_pipe_clk_src";
+				clock-output-rate = <250000000>;
+				#clock-cells = <0>;
+			};
 		};
 
-		pcie_phy1: phy@8e000 {
+		qmp_pcie_phy1: phy@8e000 {
 			compatible = "qcom,ipq8074-qmp-pcie-phy";
-			reg = <0x0008e000 0x1000>;
-			#phy-cells = <0>;
-			clocks = <&gcc GCC_PCIE1_PIPE_CLK>;
-			clock-names = "pipe_clk";
-			clock-output-names = "pcie20_phy1_pipe_clk";
+			reg = <0x8e000 0x1c4>; /* Serdes PLL */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_PCIE1_AUX_CLK>,
+				 <&gcc GCC_PCIE1_AHB_CLK>;
+			clock-names = "aux", "cfg_ahb";
 
 			resets = <&gcc GCC_PCIE1_PHY_BCR>,
-				<&gcc GCC_PCIE1PHY_PHY_BCR>;
+				 <&gcc GCC_PCIE1PHY_PHY_BCR>;
 			reset-names = "phy",
 				      "common";
+
 			status = "disabled";
+			pcie_phy1: lane@8e200 {
+				reg = <0x8e200 0x130>, /* Serdes Tx */
+				      <0x8e400 0x200>, /* Serdes Rx */
+				      <0x8e800 0x1f8>; /* PCS */
+				#phy-cells = <0>;
+
+				clocks = <&gcc GCC_PCIE1_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "gcc_pcie1_pipe_clk_src";
+				clock-output-rate = <125000000>;
+				#clock-cells = <0>;
+			};
 		};
 
 		tlmm: pinctrl@1000000 {
@@ -370,10 +402,10 @@ 
 
 		pcie1: pci@10000000 {
 			compatible = "qcom,pcie-ipq8074";
-			reg =  <0x10000000 0xf1d
-				0x10000f20 0xa8
-				0x00088000 0x2000
-				0x10100000 0x1000>;
+			reg =  <0x10000000 0xf1d>,
+				<0x10000f20 0xa8>,
+				<0x00088000 0x2000>,
+				<0x10100000 0x1000>;
 			reg-names = "dbi", "elbi", "parf", "config";
 			device_type = "pci";
 			linux,pci-domain = <1>;
@@ -386,9 +418,9 @@ 
 			phy-names = "pciephy";
 
 			ranges = <0x81000000 0 0x10200000 0x10200000
-				  0 0x100000   /* downstream I/O */
-				  0x82000000 0 0x10300000 0x10300000
-				  0 0xd00000>; /* non-prefetchable memory */
+				  0 0x100000>,   /* downstream I/O */
+				  <0x82000000 0 0x10220000 0x10220000
+				  0 0xfde0000>; /* non-prefetchable memory */
 
 			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -431,12 +463,13 @@ 
 		};
 
 		pcie0: pci@20000000 {
-			compatible = "qcom,pcie-ipq8074";
-			reg =  <0x20000000 0xf1d
-				0x20000f20 0xa8
-				0x00080000 0x2000
-				0x20100000 0x1000>;
-			reg-names = "dbi", "elbi", "parf", "config";
+			compatible = "qcom,pcie-ipq8074-gen3";
+			reg =  <0x20000000 0xf1d>,
+			       <0x20000f20 0xa8>,
+			       <0x20001000 0x1000>,
+			       <0x00080000 0x4000>,
+			       <0x20100000 0x1000>;
+			reg-names = "dbi", "elbi", "atu", "parf", "config";
 			device_type = "pci";
 			linux,pci-domain = <0>;
 			bus-range = <0x00 0xff>;
@@ -448,9 +481,9 @@ 
 			phy-names = "pciephy";
 
 			ranges = <0x81000000 0 0x20200000 0x20200000
-				  0 0x100000   /* downstream I/O */
-				  0x82000000 0 0x20300000 0x20300000
-				  0 0xd00000>; /* non-prefetchable memory */
+				  0 0x100000>,   /* downstream I/O */
+				 <0x82000000 0 0x20220000 0x20220000
+				  0 0xfde0000>; /* non-prefetchable memory */
 
 			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
@@ -469,27 +502,33 @@ 
 				 <&gcc GCC_PCIE0_AXI_M_CLK>,
 				 <&gcc GCC_PCIE0_AXI_S_CLK>,
 				 <&gcc GCC_PCIE0_AHB_CLK>,
-				 <&gcc GCC_PCIE0_AUX_CLK>;
+				 <&gcc GCC_PCIE0_AUX_CLK>,
+				 <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>,
+				 <&gcc GCC_PCIE0_RCHNG_CLK>;
 
 			clock-names = "iface",
 				      "axi_m",
 				      "axi_s",
 				      "ahb",
-				      "aux";
+				      "aux",
+				      "axi_bridge",
+				      "rchng";
 			resets = <&gcc GCC_PCIE0_PIPE_ARES>,
 				 <&gcc GCC_PCIE0_SLEEP_ARES>,
 				 <&gcc GCC_PCIE0_CORE_STICKY_ARES>,
 				 <&gcc GCC_PCIE0_AXI_MASTER_ARES>,
 				 <&gcc GCC_PCIE0_AXI_SLAVE_ARES>,
 				 <&gcc GCC_PCIE0_AHB_ARES>,
-				 <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>;
+				 <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>,
+				 <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>;
 			reset-names = "pipe",
 				      "sleep",
 				      "sticky",
 				      "axi_m",
 				      "axi_s",
 				      "ahb",
-				      "axi_m_sticky";
+				      "axi_m_sticky",
+				      "axi_s_sticky";
 			status = "disabled";
 		};
 	};