diff mbox series

[3/3] PCI: imx: clear vreg bypass when pcie vph voltage is 3v3

Message ID 1616142247-13789-3-git-send-email-hongxing.zhu@nxp.com (mailing list archive)
State Superseded
Delegated to: Lorenzo Pieralisi
Headers show
Series [1/3] dt-bindings: imx6q-pcie: specify the imx8mq pcie phy voltage | expand

Commit Message

Richard Zhu March 19, 2021, 8:24 a.m. UTC 
Both 1.8v and 3.3v power supplies can be feeded to i.MX8MQ PCIe PHY.
In default, the PCIE_VPH voltage is suggested to be 1.8v refer to data
sheet. When PCIE_VPH is supplied by 3.3v in the HW schematic design,
the VREG_BYPASS bits of GPR registers should be cleared from default
value 1b'1 to 1b'0.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
 drivers/pci/controller/dwc/pci-imx6.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 853ea8e82952..c35d5511b55b 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -37,6 +37,7 @@ 
 #define IMX8MQ_GPR_PCIE_REF_USE_PAD		BIT(9)
 #define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN	BIT(10)
 #define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE	BIT(11)
+#define IMX8MQ_GPR_PCIE_VREG_BYPASS		BIT(12)
 #define IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE	GENMASK(11, 8)
 #define IMX8MQ_PCIE2_BASE_ADDR			0x33c00000
 
@@ -611,6 +612,10 @@  static void imx6_pcie_configure_type(struct imx6_pcie *imx6_pcie)
 
 static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
 {
+	struct dw_pcie *pci = imx6_pcie->pci;
+	struct device *dev = pci->dev;
+	struct device_node *node = dev->of_node;
+
 	switch (imx6_pcie->drvdata->variant) {
 	case IMX8MQ:
 		/*
@@ -621,6 +626,16 @@  static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
 				   imx6_pcie_grp_offset(imx6_pcie),
 				   IMX8MQ_GPR_PCIE_REF_USE_PAD,
 				   IMX8MQ_GPR_PCIE_REF_USE_PAD);
+		/*
+		 * Regarding to the datasheet, the PCIE_VPH is suggested
+		 * to be 1.8V. If the PCIE_VPH is supplied by 3.3V, the
+		 * VREG_BYPASS should be cleared to zero.
+		 */
+		if (of_property_read_bool(node, "pcie-vph-3v3"))
+			regmap_update_bits(imx6_pcie->iomuxc_gpr,
+					   imx6_pcie_grp_offset(imx6_pcie),
+					   IMX8MQ_GPR_PCIE_VREG_BYPASS,
+					   0);
 		break;
 	case IMX7D:
 		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,