diff mbox series

[v6,3/8] dt-bindings: imx6q-pcie: Add PHY phandles and name properties

Message ID 1637200489-11855-4-git-send-email-hongxing.zhu@nxp.com (mailing list archive)
State Superseded
Delegated to: Lorenzo Pieralisi
Headers show
Series Add the imx8m pcie phy driver and imx8mm pcie support | expand

Commit Message

Richard Zhu Nov. 18, 2021, 1:54 a.m. UTC
i.MX8MM PCIe has the PHY. Add a PHY phandle and name properties
in the binding document.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml | 6 ++++++
 1 file changed, 6 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
index acea1cd444fd..643a6333b07b 100644
--- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
@@ -127,6 +127,12 @@  properties:
     enum: [1, 2, 3, 4]
     default: 1
 
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie-phy
+
   reset-gpio:
     description: Should specify the GPIO for controlling the PCI bus device
       reset signal. It's not polarity aware and defaults to active-low reset