| Message ID | 1644992463-14467-7-git-send-email-hongxing.zhu@nxp.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | PCI: imx6: refine codes and add compliance tests mode support | expand |
On Wed, Feb 16, 2022 at 02:21:01PM +0800, Richard Zhu wrote: > When link is never came up in the link training after host_init. > The clocks and power supplies usage counter balance should be handled > properly on some DWC platforms (for example, i.MX PCIe). > > Add a new host_exit() callback into dw_pcie_host_ops, then it could be > invoked to handle the unbalance issue in the error handling after > host_init() function when link is down. Possible rewording, not sure if it captures everything you want: When the link never comes up after ->host_init(), some drivers, especially those that don't support hotplug, want to turn off clocks and power supplies. Add a new ->host_exit() callback in dw_pcie_host_ops so these drivers can clean up if ->host_init() fails.
> -----Original Message----- > From: Bjorn Helgaas <helgaas@kernel.org> > Sent: 2022年2月24日 1:50 > To: Hongxing Zhu <hongxing.zhu@nxp.com> > Cc: l.stach@pengutronix.de; bhelgaas@google.com; broonie@kernel.org; > lorenzo.pieralisi@arm.com; jingoohan1@gmail.com; festevam@gmail.com; > francesco.dolcini@toradex.com; linux-pci@vger.kernel.org; > linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org; > kernel@pengutronix.de; dl-linux-imx <linux-imx@nxp.com> > Subject: Re: [PATCH v7 6/8] PCI: dwc: Add dw_pcie_host_ops.host_exit() > callback > > On Wed, Feb 16, 2022 at 02:21:01PM +0800, Richard Zhu wrote: > > When link is never came up in the link training after host_init. > > The clocks and power supplies usage counter balance should be handled > > properly on some DWC platforms (for example, i.MX PCIe). > > > > Add a new host_exit() callback into dw_pcie_host_ops, then it could be > > invoked to handle the unbalance issue in the error handling after > > host_init() function when link is down. > > Possible rewording, not sure if it captures everything you want: > > When the link never comes up after ->host_init(), some drivers, > especially those that don't support hotplug, want to turn off clocks > and power supplies. > > Add a new ->host_exit() callback in dw_pcie_host_ops so these > drivers can clean up if ->host_init() fails. Thanks, it's more detailed, and easier understand. Would be updated later. Best Regards Richard Zhu
diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c index f4755f3a03be..461863bde3c9 100644 --- a/drivers/pci/controller/dwc/pcie-designware-host.c +++ b/drivers/pci/controller/dwc/pcie-designware-host.c @@ -405,7 +405,7 @@ int dw_pcie_host_init(struct pcie_port *pp) if (!dw_pcie_link_up(pci) && pci->ops && pci->ops->start_link) { ret = pci->ops->start_link(pci); if (ret) - goto err_free_msi; + goto err_host_init; } /* Ignore errors, the link may come up later */ @@ -417,6 +417,9 @@ int dw_pcie_host_init(struct pcie_port *pp) if (!ret) return 0; +err_host_init: + if (pp->ops->host_exit) + pp->ops->host_exit(pp); err_free_msi: if (pp->has_msi_ctrl) dw_pcie_free_msi(pp); diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h index 7d6e9b7576be..1153687ea9a6 100644 --- a/drivers/pci/controller/dwc/pcie-designware.h +++ b/drivers/pci/controller/dwc/pcie-designware.h @@ -174,6 +174,7 @@ enum dw_pcie_device_mode { struct dw_pcie_host_ops { int (*host_init)(struct pcie_port *pp); + void (*host_exit)(struct pcie_port *pp); int (*msi_host_init)(struct pcie_port *pp); };
When link is never came up in the link training after host_init. The clocks and power supplies usage counter balance should be handled properly on some DWC platforms (for example, i.MX PCIe). Add a new host_exit() callback into dw_pcie_host_ops, then it could be invoked to handle the unbalance issue in the error handling after host_init() function when link is down. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> --- drivers/pci/controller/dwc/pcie-designware-host.c | 5 ++++- drivers/pci/controller/dwc/pcie-designware.h | 1 + 2 files changed, 5 insertions(+), 1 deletion(-)