From patchwork Wed Feb 16 06:21:03 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Hongxing Zhu X-Patchwork-Id: 12748024 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 6DE19C433EF for ; Wed, 16 Feb 2022 07:17:49 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229828AbiBPHR7 (ORCPT ); Wed, 16 Feb 2022 02:17:59 -0500 Received: from gmail-smtp-in.l.google.com ([23.128.96.19]:37518 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229788AbiBPHR6 (ORCPT ); Wed, 16 Feb 2022 02:17:58 -0500 Received: from inva020.nxp.com (inva020.nxp.com [92.121.34.13]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 78FF1C7D70; Tue, 15 Feb 2022 23:17:46 -0800 (PST) Received: from inva020.nxp.com (localhost [127.0.0.1]) by inva020.eu-rdc02.nxp.com (Postfix) with ESMTP id 617401A1A55; Wed, 16 Feb 2022 07:52:59 +0100 (CET) Received: from aprdc01srsp001v.ap-rdc01.nxp.com (aprdc01srsp001v.ap-rdc01.nxp.com [165.114.16.16]) by inva020.eu-rdc02.nxp.com (Postfix) with ESMTP id 072931A0317; Wed, 16 Feb 2022 07:52:59 +0100 (CET) Received: from localhost.localdomain (shlinux2.ap.freescale.net [10.192.224.44]) by aprdc01srsp001v.ap-rdc01.nxp.com (Postfix) with ESMTP id BAAF3183F0C3; Wed, 16 Feb 2022 14:52:57 +0800 (+08) From: Richard Zhu To: l.stach@pengutronix.de, bhelgaas@google.com, broonie@kernel.org, lorenzo.pieralisi@arm.com, jingoohan1@gmail.com, festevam@gmail.com, francesco.dolcini@toradex.com Cc: hongxing.zhu@nxp.com, linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, kernel@pengutronix.de, linux-imx@nxp.com Subject: [PATCH v7 8/8] PCI: imx6: Add the compliance tests mode support Date: Wed, 16 Feb 2022 14:21:03 +0800 Message-Id: <1644992463-14467-9-git-send-email-hongxing.zhu@nxp.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1644992463-14467-1-git-send-email-hongxing.zhu@nxp.com> References: <1644992463-14467-1-git-send-email-hongxing.zhu@nxp.com> X-Virus-Scanned: ClamAV using ClamSMTP Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org Refer to the system board signal Quality of PCIe archiecture PHY test specification. Signal quality tests(for example: jitters, differential eye opening and so on ) can be executed with devices in the polling.compliance state. To let the device support polling.compliance stat, the clocks and powers shouldn't be turned off when the probe of device driver is failed. Based on CLB(Compliance Load Board) Test Fixture and so on test equipments, the PHY link would be down during the compliance tests. Refer to this scenario, add the i.MX PCIe compliance tests mode enable support, and keep the clocks and powers on, and finish the driver probe without error return. Use the "pci_imx6.compliance=1" in kernel command line to enable the compliance tests mode. Signed-off-by: Richard Zhu Signed-off-by: Richard Zhu --- drivers/pci/controller/dwc/pci-imx6.c | 47 ++++++++++++++++++--------- 1 file changed, 31 insertions(+), 16 deletions(-) diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index fe671e88ec93..d7f0db01f3c3 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -146,6 +146,10 @@ struct imx6_pcie { #define PHY_RX_OVRD_IN_LO_RX_DATA_EN BIT(5) #define PHY_RX_OVRD_IN_LO_RX_PLL_EN BIT(3) +static bool imx6_pcie_cmp_mode; +module_param_named(compliance, imx6_pcie_cmp_mode, bool, 0644); +MODULE_PARM_DESC(compliance, "i.MX PCIe compliance test mode (1=compliance test mode enabled)"); + static int pcie_phy_poll_ack(struct imx6_pcie *imx6_pcie, bool exp_val) { struct dw_pcie *pci = imx6_pcie->pci; @@ -840,10 +844,12 @@ static int imx6_pcie_start_link(struct dw_pcie *pci) * started in Gen2 mode, there is a possibility the devices on the * bus will not be detected at all. This happens with PCIe switches. */ - tmp = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP); - tmp &= ~PCI_EXP_LNKCAP_SLS; - tmp |= PCI_EXP_LNKCAP_SLS_2_5GB; - dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, tmp); + if (!imx6_pcie_cmp_mode) { + tmp = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP); + tmp &= ~PCI_EXP_LNKCAP_SLS; + tmp |= PCI_EXP_LNKCAP_SLS_2_5GB; + dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, tmp); + } /* Start LTSSM. */ imx6_pcie_ltssm_enable(dev); @@ -930,18 +936,20 @@ static void imx6_pcie_host_exit(struct pcie_port *pp) struct device *dev = pci->dev; struct imx6_pcie *imx6_pcie = to_imx6_pcie(pci); - imx6_pcie_reset_phy(imx6_pcie); - imx6_pcie_clk_disable(imx6_pcie); - switch (imx6_pcie->drvdata->variant) { - case IMX8MM: - if (phy_power_off(imx6_pcie->phy)) - dev_err(dev, "unable to power off phy\n"); - break; - default: - break; + if (!imx6_pcie_cmp_mode) { + imx6_pcie_reset_phy(imx6_pcie); + imx6_pcie_clk_disable(imx6_pcie); + switch (imx6_pcie->drvdata->variant) { + case IMX8MM: + if (phy_power_off(imx6_pcie->phy)) + dev_err(dev, "unable to power off phy\n"); + break; + default: + break; + } + if (imx6_pcie->vpcie) + regulator_disable(imx6_pcie->vpcie); } - if (imx6_pcie->vpcie) - regulator_disable(imx6_pcie->vpcie); } static const struct dw_pcie_host_ops imx6_pcie_host_ops = { @@ -1259,8 +1267,15 @@ static int imx6_pcie_probe(struct platform_device *pdev) return ret; ret = dw_pcie_host_init(&pci->pp); - if (ret < 0) + if (ret < 0) { + if (imx6_pcie_cmp_mode) { + dev_info(dev, "Driver loaded with compliance test mode enabled.\n"); + ret = 0; + } else { + dev_err(dev, "Unable to add pcie port.\n"); + } return ret; + } if (pci_msi_enabled()) { u8 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_MSI);