diff mbox series

[v11,7/8] PCI: imx6: Reduce resume time by only starting link if it was up before suspend

Message ID 1655189942-12678-8-git-send-email-hongxing.zhu@nxp.com (mailing list archive)
State Superseded
Headers show
Series PCI: imx6: refine codes and add the error propagation | expand

Commit Message

Hongxing Zhu June 14, 2022, 6:59 a.m. UTC 
Because i.MX PCIe doesn't support hot-plug feature.
In the link down scenario, only start the PCIe link training in resume
when the link is up before system suspend to avoid the long latency in
the link training period.

Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
---
 drivers/pci/controller/dwc/pci-imx6.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 68d0bd703bbd..6a55bc395a2c 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -67,6 +67,7 @@  struct imx6_pcie {
 	struct dw_pcie		*pci;
 	int			reset_gpio;
 	bool			gpio_active_high;
+	bool			link_is_up;
 	struct clk		*pcie_bus;
 	struct clk		*pcie_phy;
 	struct clk		*pcie_inbound_axi;
@@ -895,6 +896,7 @@  static int imx6_pcie_start_link(struct dw_pcie *pci)
 		dev_info(dev, "Link: Gen2 disabled\n");
 	}
 
+	imx6_pcie->link_is_up = true;
 	tmp = dw_pcie_readw_dbi(pci, offset + PCI_EXP_LNKSTA);
 	dev_info(dev, "Link up, Gen%i\n", tmp & PCI_EXP_LNKSTA_CLS);
 	return 0;
@@ -1031,10 +1033,8 @@  static int imx6_pcie_resume_noirq(struct device *dev)
 	imx6_pcie_init_phy(imx6_pcie);
 	imx6_pcie_deassert_core_reset(imx6_pcie);
 	dw_pcie_setup_rc(pp);
-
-	ret = imx6_pcie_start_link(imx6_pcie->pci);
-	if (ret < 0)
-		dev_info(dev, "pcie link is down after resume.\n");
+	if (imx6_pcie->link_is_up)
+		imx6_pcie_start_link(imx6_pcie->pci);
 
 	return 0;
 }