| Message ID | 1661760917-9558-5-git-send-email-hongxing.zhu@nxp.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add iMX8MP PCIe support | expand |
Am Montag, dem 29.08.2022 um 16:15 +0800 schrieb Richard Zhu: > Add i.MX8MP PCIe support. > > Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> > Tested-by: Marek Vasut <marex@denx.de> > Tested-by: Richard Leitner <richard.leitner@skidata.com> > Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> > --- > arch/arm64/boot/dts/freescale/imx8mp.dtsi | 46 ++++++++++++++++++++++- > 1 file changed, 45 insertions(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi > index fe178b7d063c..d11f079fd1f3 100644 > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi > @@ -5,6 +5,7 @@ > > #include <dt-bindings/clock/imx8mp-clock.h> > #include <dt-bindings/power/imx8mp-power.h> > +#include <dt-bindings/reset/imx8mp-reset.h> > #include <dt-bindings/gpio/gpio.h> > #include <dt-bindings/input/input.h> > #include <dt-bindings/interrupt-controller/arm-gic.h> > @@ -410,7 +411,8 @@ iomuxc: pinctrl@30330000 { > }; > > gpr: iomuxc-gpr@30340000 { > - compatible = "fsl,imx8mp-iomuxc-gpr", "syscon"; > + compatible = "fsl,imx8mp-iomuxc-gpr", > + "fsl,imx6q-iomuxc-gpr", "syscon"; I don't like this part. The iomux GPR in the i.MX8M* is not really compatible with the i.MX6Q, so I think it's a pretty bad idea to claim it is. Why can't we have this syscon looked up by phandle, like we discussed in some early version of the i.MX8MM patchset? Sorry, for not catching this on the 8MM submission, I was pretty busy back then. Regards, Lucas > reg = <0x30340000 0x10000>; > }; > > @@ -1084,6 +1086,17 @@ media_blk_ctrl: blk-ctrl@32ec0000 { > #power-domain-cells = <1>; > }; > > + pcie_phy: pcie-phy@32f00000 { > + compatible = "fsl,imx8mp-pcie-phy"; > + reg = <0x32f00000 0x10000>; > + resets = <&src IMX8MP_RESET_PCIEPHY>, > + <&src IMX8MP_RESET_PCIEPHY_PERST>; > + reset-names = "pciephy", "perst"; > + power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE_PHY>; > + #phy-cells = <0>; > + status = "disabled"; > + }; > + > hsio_blk_ctrl: blk-ctrl@32f10000 { > compatible = "fsl,imx8mp-hsio-blk-ctrl", "syscon"; > reg = <0x32f10000 0x24>; > @@ -1099,6 +1112,37 @@ hsio_blk_ctrl: blk-ctrl@32f10000 { > }; > }; > > + pcie: pcie@33800000 { > + compatible = "fsl,imx8mp-pcie"; > + reg = <0x33800000 0x400000>, <0x1ff00000 0x80000>; > + reg-names = "dbi", "config"; > + #address-cells = <3>; > + #size-cells = <2>; > + device_type = "pci"; > + bus-range = <0x00 0xff>; > + ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000>, /* downstream I/O 64KB */ > + <0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */ > + num-lanes = <1>; > + num-viewport = <4>; > + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "msi"; > + #interrupt-cells = <1>; > + interrupt-map-mask = <0 0 0 0x7>; > + interrupt-map = <0 0 0 1 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, > + <0 0 0 2 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, > + <0 0 0 3 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, > + <0 0 0 4 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; > + fsl,max-link-speed = <3>; > + linux,pci-domain = <0>; > + power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE>; > + resets = <&src IMX8MP_RESET_PCIE_CTRL_APPS_EN>, > + <&src IMX8MP_RESET_PCIE_CTRL_APPS_TURNOFF>; > + reset-names = "apps", "turnoff"; > + phys = <&pcie_phy>; > + phy-names = "pcie-phy"; > + status = "disabled"; > + }; > + > gpu3d: gpu@38000000 { > compatible = "vivante,gc"; > reg = <0x38000000 0x8000>;
> -----Original Message----- > From: Lucas Stach <l.stach@pengutronix.de> > Sent: 2022年8月29日 23:23 > To: Hongxing Zhu <hongxing.zhu@nxp.com>; p.zabel@pengutronix.de; > bhelgaas@google.com; lorenzo.pieralisi@arm.com; robh@kernel.org; > shawnguo@kernel.org; vkoul@kernel.org; alexander.stein@ew.tq-group.com; > marex@denx.de; richard.leitner@linux.dev > Cc: linux-phy@lists.infradead.org; devicetree@vger.kernel.org; > linux-pci@vger.kernel.org; linux-arm-kernel@lists.infradead.org; > linux-kernel@vger.kernel.org; kernel@pengutronix.de; dl-linux-imx > <linux-imx@nxp.com> > Subject: Re: [PATCH v4 4/6] arm64: dts: imx8mp: Add iMX8MP PCIe support > > Am Montag, dem 29.08.2022 um 16:15 +0800 schrieb Richard Zhu: > > Add i.MX8MP PCIe support. > > > > Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> > > Tested-by: Marek Vasut <marex@denx.de> > > Tested-by: Richard Leitner <richard.leitner@skidata.com> > > Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> > > --- > > arch/arm64/boot/dts/freescale/imx8mp.dtsi | 46 > > ++++++++++++++++++++++- > > 1 file changed, 45 insertions(+), 1 deletion(-) > > > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi > > b/arch/arm64/boot/dts/freescale/imx8mp.dtsi > > index fe178b7d063c..d11f079fd1f3 100644 > > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi > > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi > > @@ -5,6 +5,7 @@ > > > > #include <dt-bindings/clock/imx8mp-clock.h> > > #include <dt-bindings/power/imx8mp-power.h> > > +#include <dt-bindings/reset/imx8mp-reset.h> > > #include <dt-bindings/gpio/gpio.h> > > #include <dt-bindings/input/input.h> > > #include <dt-bindings/interrupt-controller/arm-gic.h> > > @@ -410,7 +411,8 @@ iomuxc: pinctrl@30330000 { > > }; > > > > gpr: iomuxc-gpr@30340000 { > > - compatible = "fsl,imx8mp-iomuxc-gpr", "syscon"; > > + compatible = "fsl,imx8mp-iomuxc-gpr", > > + "fsl,imx6q-iomuxc-gpr", "syscon"; > > I don't like this part. The iomux GPR in the i.MX8M* is not really compatible > with the i.MX6Q, so I think it's a pretty bad idea to claim it is. Why can't we > have this syscon looked up by phandle, like we discussed in some early version > of the i.MX8MM patchset? Sorry, for not catching this on the 8MM submission, > I was pretty busy back then. Okay, got that. Thanks. Would be changed, and fetch the gpr regmap by phandle in v5 later. Best Regards Richard Zhu > > Regards, > Lucas > > > reg = <0x30340000 0x10000>; > > }; > > > > @@ -1084,6 +1086,17 @@ media_blk_ctrl: blk-ctrl@32ec0000 { > > #power-domain-cells = <1>; > > }; > > > > + pcie_phy: pcie-phy@32f00000 { > > + compatible = "fsl,imx8mp-pcie-phy"; > > + reg = <0x32f00000 0x10000>; > > + resets = <&src IMX8MP_RESET_PCIEPHY>, > > + <&src IMX8MP_RESET_PCIEPHY_PERST>; > > + reset-names = "pciephy", "perst"; > > + power-domains = <&hsio_blk_ctrl > IMX8MP_HSIOBLK_PD_PCIE_PHY>; > > + #phy-cells = <0>; > > + status = "disabled"; > > + }; > > + > > hsio_blk_ctrl: blk-ctrl@32f10000 { > > compatible = "fsl,imx8mp-hsio-blk-ctrl", "syscon"; > > reg = <0x32f10000 0x24>; > > @@ -1099,6 +1112,37 @@ hsio_blk_ctrl: blk-ctrl@32f10000 { > > }; > > }; > > > > + pcie: pcie@33800000 { > > + compatible = "fsl,imx8mp-pcie"; > > + reg = <0x33800000 0x400000>, <0x1ff00000 0x80000>; > > + reg-names = "dbi", "config"; > > + #address-cells = <3>; > > + #size-cells = <2>; > > + device_type = "pci"; > > + bus-range = <0x00 0xff>; > > + ranges = <0x81000000 0 0x00000000 0x1ff80000 0 > 0x00010000>, /* downstream I/O 64KB */ > > + <0x82000000 0 0x18000000 0x18000000 0 > 0x07f00000>; /* non-prefetchable memory */ > > + num-lanes = <1>; > > + num-viewport = <4>; > > + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-names = "msi"; > > + #interrupt-cells = <1>; > > + interrupt-map-mask = <0 0 0 0x7>; > > + interrupt-map = <0 0 0 1 &gic GIC_SPI 126 > IRQ_TYPE_LEVEL_HIGH>, > > + <0 0 0 2 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, > > + <0 0 0 3 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, > > + <0 0 0 4 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; > > + fsl,max-link-speed = <3>; > > + linux,pci-domain = <0>; > > + power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE>; > > + resets = <&src IMX8MP_RESET_PCIE_CTRL_APPS_EN>, > > + <&src IMX8MP_RESET_PCIE_CTRL_APPS_TURNOFF>; > > + reset-names = "apps", "turnoff"; > > + phys = <&pcie_phy>; > > + phy-names = "pcie-phy"; > > + status = "disabled"; > > + }; > > + > > gpu3d: gpu@38000000 { > > compatible = "vivante,gc"; > > reg = <0x38000000 0x8000>; >
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index fe178b7d063c..d11f079fd1f3 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/clock/imx8mp-clock.h> #include <dt-bindings/power/imx8mp-power.h> +#include <dt-bindings/reset/imx8mp-reset.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -410,7 +411,8 @@ iomuxc: pinctrl@30330000 { }; gpr: iomuxc-gpr@30340000 { - compatible = "fsl,imx8mp-iomuxc-gpr", "syscon"; + compatible = "fsl,imx8mp-iomuxc-gpr", + "fsl,imx6q-iomuxc-gpr", "syscon"; reg = <0x30340000 0x10000>; }; @@ -1084,6 +1086,17 @@ media_blk_ctrl: blk-ctrl@32ec0000 { #power-domain-cells = <1>; }; + pcie_phy: pcie-phy@32f00000 { + compatible = "fsl,imx8mp-pcie-phy"; + reg = <0x32f00000 0x10000>; + resets = <&src IMX8MP_RESET_PCIEPHY>, + <&src IMX8MP_RESET_PCIEPHY_PERST>; + reset-names = "pciephy", "perst"; + power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE_PHY>; + #phy-cells = <0>; + status = "disabled"; + }; + hsio_blk_ctrl: blk-ctrl@32f10000 { compatible = "fsl,imx8mp-hsio-blk-ctrl", "syscon"; reg = <0x32f10000 0x24>; @@ -1099,6 +1112,37 @@ hsio_blk_ctrl: blk-ctrl@32f10000 { }; }; + pcie: pcie@33800000 { + compatible = "fsl,imx8mp-pcie"; + reg = <0x33800000 0x400000>, <0x1ff00000 0x80000>; + reg-names = "dbi", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + bus-range = <0x00 0xff>; + ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000>, /* downstream I/O 64KB */ + <0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */ + num-lanes = <1>; + num-viewport = <4>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + fsl,max-link-speed = <3>; + linux,pci-domain = <0>; + power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_PCIE>; + resets = <&src IMX8MP_RESET_PCIE_CTRL_APPS_EN>, + <&src IMX8MP_RESET_PCIE_CTRL_APPS_TURNOFF>; + reset-names = "apps", "turnoff"; + phys = <&pcie_phy>; + phy-names = "pcie-phy"; + status = "disabled"; + }; + gpu3d: gpu@38000000 { compatible = "vivante,gc"; reg = <0x38000000 0x8000>;