new file mode 100644
@@ -0,0 +1,37 @@
+Synopsys PCI RC IP Reference plaftform driver
+---------------------------------------------
+
+This is the reference platform driver to be used in the Synopsys PCI Root
+Complex IP.
+
+Required properties:
+- compatible: set to "snps,pcie-dw-platform" or "snps,pcie-dw-ipk" or
+"pcie-dw-haps-prototyping";
+- reg: base address and length of the pcie controller registers and
+configuration address space.
+- reg-names: Must be "config" for the PCIe configuration space.
+- #address-cells: set to <3>.
+- #size-cells: set to <2>.
+- device_type: set to "pci".
+- ranges: ranges for the PCI memory and I/O regions.
+- interrupts: one interrupt source for MSI interrupts, followed by interrupt
+ source for hardware related interrupts.
+- #interrupt-cells: set to <1>.
+- num-lanes: set to <1>.
+
+Example configuration:
+
+ pcie: pcie@0xdffff000 {
+ compatible = "snps,pcie-dw-platform";
+ reg = <0xdffff000 0x1000
+ 0xd0000000 0x2000>;
+ reg-names = "csr", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0x00000000 0xde000000 0 0x00010000
+ 0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>;
+ interrupts = <25>, <24>;
+ #interrupt-cells = <1>;
+ num-lanes = <1>;
+ };
deleted file mode 100644
@@ -1,33 +0,0 @@
-Synopsys PCI RC IP Prototyping Kit
-----------------------------------
-
-This is the reference platform driver to be used in the Synopsys PCI Root
-Complex IP Prototyping Kit.
-
-Required properties:
-- compatible: set to "snps,pcie-synopsys";
-- reg: base address and length of the pcie controller registers.
-- #address-cells: set to <3>
-- #size-cells: set to <2>
-- device_type: set to "pci"
-- ranges: ranges for the PCI memory and I/O regions.
-- interrupts: one interrupt source for MSI interrupts, followed by interrupt
- source for hardware related interrupts.
-- #interrupt-cells: set to <1>
-- num-lanes: set to <1>;
-
-Example configuration:
-
- pcie: pcie@0xdffff000 {
- compatible = "snps,pcie-synopsys";
- reg = <0xdffff000 0x1000>;
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- ranges = <0x00000800 0 0xd0000000 0xd0000000 0 0x00002000>,
- <0x81000000 0 0x00000000 0xde000000 0 0x00010000>,
- <0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>;
- interrupts = <25>, <24>;
- #interrupt-cells = <1>;
- num-lanes = <1>;
- };
@@ -191,12 +191,12 @@ config PCIE_QCOM
PCIe controller uses the Designware core plus Qualcomm-specific
hardware wrappers.
-config PCIE_SYNOPSYS
- bool "Platform Driver for Synopsys Device"
+config PCIE_DW_PLAT
+ bool "Generic Platform Driver for DesignWare PCIe RC"
depends on ARC && OF
select PCIEPORTBUS
select PCIE_DW
help
- Say Y here if you want to enable PCIe controller support on the
- Synopsys IP Prototyping Kits.
+ Say Y here if you want to use the generic platform driver for
+ DesignWare PCIe RC IP.
endmenu
@@ -22,4 +22,4 @@ obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o
obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o
obj-$(CONFIG_PCI_HISI) += pcie-hisi.o
obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
-obj-$(CONFIG_PCIE_SYNOPSYS) += pcie-synopsys.o
+obj-$(CONFIG_PCIE_DW_PLAT) += pcie-designware-pltfm.o
new file mode 100644
@@ -0,0 +1,239 @@
+/*
+ * PCIe RC driver for Synopsys Designware Core
+ *
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Authors: Manjunath Bettegowda <manjumb@synopsys.com>
+ * Jie Deng <jiedeng@synopsys.com>
+ * Joao Pinto <jpinto@synopsys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/resource.h>
+#include <linux/types.h>
+
+#include "pcie-designware.h"
+
+#define to_dw_pltfm_pcie(x) container_of(x, struct dw_pltfm_pcie, pp)
+
+struct dw_pltfm_pcie {
+ void __iomem *mem_base; /* Memory Base to access Core's [RC]
+ * Config Space Layout
+ */
+ struct pcie_port pp; /* RC Root Port specific structure -
+ * DWC_PCIE_RC stuff
+ */
+};
+
+#define PCI_EQUAL_CONTROL_PHY 0x00000707
+#define PCIE_PHY_DEBUG_R1_LINK_UP 0x00000010
+
+/* PCIe Port Logic registers (memory-mapped) */
+#define PLR_OFFSET 0x700
+#define PCIE_PHY_DEBUG_R0 (PLR_OFFSET + 0x28) /* 0x728 */
+#define PCIE_PHY_DEBUG_R1 (PLR_OFFSET + 0x2c) /* 0x72c */
+
+static irqreturn_t dw_pltfm_pcie_msi_irq_handler(int irq, void *arg)
+{
+ struct pcie_port *pp = arg;
+
+ return dw_handle_msi_irq(pp);
+}
+
+static void dw_pltfm_pcie_init_phy(struct pcie_port *pp)
+{
+ /* write Lane 0 Equalization Control fields register */
+ writel(PCI_EQUAL_CONTROL_PHY, pp->dbi_base + 0x154);
+}
+
+static int dw_pltfm_pcie_deassert_core_reset(struct pcie_port *pp)
+{
+ return 0;
+}
+
+static void dw_pltfm_pcie_establish_link(struct pcie_port *pp)
+{
+ int retries;
+
+ /* wait for link to come up */
+ for (retries = 0; retries < 10; retries++) {
+ if (dw_pcie_link_up(pp)) {
+ dev_info(pp->dev, "Link up\n");
+ return;
+ }
+ msleep(100);
+ }
+
+ dev_err(pp->dev, "Link fail\n");
+}
+
+/*
+ * dw_pltfm_pcie_host_init()
+ * Platform specific host/RC initialization
+ * a. Assert the core reset
+ * b. Assert and deassert phy reset and initialize the phy
+ * c. De-Assert the core reset
+ * d. Initializet the Root Port (BARs/Memory Or IO/ Interrupt/ Commnad Reg)
+ * e. Initiate Link startup procedure
+ *
+ */
+static void dw_pltfm_pcie_host_init(struct pcie_port *pp)
+{
+ /* Initialize Phy (Reset/poweron/control-inputs ) */
+ dw_pltfm_pcie_init_phy(pp);
+
+ dw_pltfm_pcie_deassert_core_reset(pp);
+
+ dw_pcie_setup_rc(pp);
+
+ dw_pltfm_pcie_establish_link(pp);
+
+ if (IS_ENABLED(CONFIG_PCI_MSI))
+ dw_pcie_msi_init(pp);
+}
+
+static int dw_pltfm_pcie_link_up(struct pcie_port *pp)
+{
+ u32 val;
+
+ val = readl(pp->dbi_base + PCIE_PHY_DEBUG_R1);
+ return val & PCIE_PHY_DEBUG_R1_LINK_UP;
+}
+
+/**
+ * This is RC operation structure
+ * dw_pltfm_pcie_link_up: the function which initiates the phy link up procedure
+ * dw_pltfm_pcie_host_init: the function which does the host/RC Root port
+ * initialization.
+ */
+static struct pcie_host_ops dw_pltfm_pcie_host_ops = {
+ .link_up = dw_pltfm_pcie_link_up,
+ .host_init = dw_pltfm_pcie_host_init,
+};
+
+/**
+ * dw_pltfm_add_pcie_port
+ * This function
+ * a. installs the interrupt handler
+ * b. registers host operations in the pcie_port structure
+ */
+static int dw_pltfm_add_pcie_port(struct pcie_port *pp,
+ struct platform_device *pdev)
+{
+ int ret;
+
+ pp->irq = platform_get_irq(pdev, 1);
+ if (pp->irq < 0)
+ return pp->irq;
+
+ if (IS_ENABLED(CONFIG_PCI_MSI)) {
+ pp->msi_irq = platform_get_irq(pdev, 0);
+ if (pp->msi_irq < 0)
+ return pp->msi_irq;
+
+ ret = devm_request_irq(&pdev->dev, pp->msi_irq,
+ dw_pltfm_pcie_msi_irq_handler,
+ IRQF_SHARED, "dw_pltfm-pcie-msi", pp);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request MSI IRQ %d\n",
+ pp->msi_irq);
+ return ret;
+ }
+ }
+
+ pp->root_bus_nr = -1;
+ pp->ops = &dw_pltfm_pcie_host_ops;
+
+ /* Below function:
+ * Checks for range property from DT
+ * Gets the IO and MEMORY and CONFIG-Space ranges from DT
+ * Does IOREMAPS on the physical addresses
+ * Gets the num-lanes from DT
+ * Gets MSI capability from DT
+ * Calls the platform specific host initialization
+ * Program the correct class, BAR0, Link width, in Config space
+ * Then it calls pci common init routine
+ * Then it calls function to assign "unassigned resources"
+ */
+ ret = dw_pcie_host_init(pp);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to initialize host\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * dw_pltfm_pcie_probe()
+ * This function gets called as part of PCIe registration. If the ID matches
+ * the platform driver framework will call this function.
+ *
+ * @pdev: Pointer to the platform_device structure
+ *
+ * Returns zero on success; Negative errno on failure
+ */
+static int dw_pltfm_pcie_probe(struct platform_device *pdev)
+{
+ struct dw_pltfm_pcie *dw_pltfm_pcie;
+ struct pcie_port *pp;
+ struct resource *res;
+ int ret;
+
+ dw_pltfm_pcie = devm_kzalloc(&pdev->dev, sizeof(*dw_pltfm_pcie),
+ GFP_KERNEL);
+ if (!dw_pltfm_pcie)
+ return -ENOMEM;
+
+ pp = &dw_pltfm_pcie->pp;
+ pp->dev = &pdev->dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+
+ dw_pltfm_pcie->mem_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(dw_pltfm_pcie->mem_base))
+ return PTR_ERR(dw_pltfm_pcie->mem_base);
+
+ pp->dbi_base = dw_pltfm_pcie->mem_base;
+
+ ret = dw_pltfm_add_pcie_port(pp, pdev);
+ if (ret < 0)
+ return ret;
+
+ platform_set_drvdata(pdev, dw_pltfm_pcie);
+
+ return 0;
+}
+
+static const struct of_device_id dw_pltfm_pcie_of_match[] = {
+ { .compatible = "snps,pcie-dw-platform", },
+ { .compatible = "snps,pcie-dw-ipk", },
+ { .compatible = "pcie-dw-haps-prototyping", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, dw_pltfm_pcie_of_match);
+
+static struct platform_driver dw_pltfm_pcie_driver = {
+ .driver = {
+ .name = "pcie-designware-pltfm",
+ .of_match_table = dw_pltfm_pcie_of_match,
+ },
+ .probe = dw_pltfm_pcie_probe,
+};
+
+module_platform_driver(dw_pltfm_pcie_driver);
+
+MODULE_AUTHOR("Manjunath Bettegowda <manjumb@synopsys.com>");
+MODULE_DESCRIPTION("DesignWare PCIe host controller platform driver");
+MODULE_LICENSE("GPL v2");
deleted file mode 100644
@@ -1,250 +0,0 @@
-/*
- * PCIe RC driver for Synopsys Designware Core
- *
- * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
- *
- * Authors: Manjunath Bettegowda <manjumb@synopsys.com>
- * Jie Deng <jiedeng@synopsys.com>
- * Joao Pinto <jpinto@synopsys.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/platform_device.h>
-#include <linux/resource.h>
-#include <linux/types.h>
-
-#include "pcie-designware.h"
-
-#define to_synopsys_pcie(x) container_of(x, struct synopsys_pcie, pp)
-
-struct synopsys_pcie {
- void __iomem *mem_base; /* Memory Base to access Core's [RC]
- * Config Space Layout
- */
- struct pcie_port pp; /* RC Root Port specific structure -
- * DWC_PCIE_RC stuff
- */
-};
-
-#define PCI_EQUAL_CONTROL_PHY 0x00000707
-#define PCIE_PHY_DEBUG_R1_LINK_UP 0x00000010
-
-/* PCIe Port Logic registers (memory-mapped) */
-#define PLR_OFFSET 0x700
-#define PCIE_PHY_DEBUG_R0 (PLR_OFFSET + 0x28) /* 0x728 */
-#define PCIE_PHY_DEBUG_R1 (PLR_OFFSET + 0x2c) /* 0x72c */
-
-/* This handler was created for future work */
-static irqreturn_t synopsys_pcie_irq_handler(int irq, void *arg)
-{
- return IRQ_NONE;
-}
-
-static irqreturn_t synopsys_pcie_msi_irq_handler(int irq, void *arg)
-{
- struct pcie_port *pp = arg;
-
- return dw_handle_msi_irq(pp);
-}
-
-static void synopsys_pcie_init_phy(struct pcie_port *pp)
-{
- /* write Lane 0 Equalization Control fields register */
- writel(PCI_EQUAL_CONTROL_PHY, pp->dbi_base + 0x154);
-}
-
-static int synopsys_pcie_deassert_core_reset(struct pcie_port *pp)
-{
- return 0;
-}
-
-static void synopsys_pcie_establish_link(struct pcie_port *pp)
-{
- int retries;
-
- /* wait for link to come up */
- for (retries = 0; retries < 10; retries++) {
- if (dw_pcie_link_up(pp)) {
- dev_info(pp->dev, "Link up\n");
- return;
- }
- mdelay(100);
- }
-
- dev_err(pp->dev, "Link fail\n");
-}
-
-/*
- * synopsys_pcie_host_init()
- * Platform specific host/RC initialization
- * a. Assert the core reset
- * b. Assert and deassert phy reset and initialize the phy
- * c. De-Assert the core reset
- * d. Initializet the Root Port (BARs/Memory Or IO/ Interrupt/ Commnad Reg)
- * e. Initiate Link startup procedure
- *
- */
-static void synopsys_pcie_host_init(struct pcie_port *pp)
-{
- /* Initialize Phy (Reset/poweron/control-inputs ) */
- synopsys_pcie_init_phy(pp);
-
- synopsys_pcie_deassert_core_reset(pp);
-
- dw_pcie_setup_rc(pp);
-
- synopsys_pcie_establish_link(pp);
-
- if (IS_ENABLED(CONFIG_PCI_MSI))
- dw_pcie_msi_init(pp);
-}
-
-static int synopsys_pcie_link_up(struct pcie_port *pp)
-{
- u32 val;
-
- val = readl(pp->dbi_base + PCIE_PHY_DEBUG_R1);
- return val & PCIE_PHY_DEBUG_R1_LINK_UP;
-}
-
-/**
- * This is RC operation structure
- * synopsys_pcie_link_up: the function which initiates the phy link up procedure
- * synopsys_pcie_host_init: the function which does the host/RC Root port
- * initialization.
- */
-static struct pcie_host_ops synopsys_pcie_host_ops = {
- .link_up = synopsys_pcie_link_up,
- .host_init = synopsys_pcie_host_init,
-};
-
-/**
- * synopsys_add_pcie_port
- * This function
- * a. installs the interrupt handler
- * b. registers host operations in the pcie_port structure
- */
-static int synopsys_add_pcie_port(struct pcie_port *pp,
- struct platform_device *pdev)
-{
- int ret;
-
- pp->irq = platform_get_irq(pdev, 1);
- if (pp->irq < 0)
- return pp->irq;
-
- ret = devm_request_irq(&pdev->dev, pp->irq, synopsys_pcie_irq_handler,
- IRQF_SHARED, "synopsys-pcie", pp);
- if (ret) {
- dev_err(&pdev->dev, "failed to request IRQ %d\n", pp->irq);
- return ret;
- }
-
- if (IS_ENABLED(CONFIG_PCI_MSI)) {
- pp->msi_irq = platform_get_irq(pdev, 0);
- if (pp->msi_irq < 0)
- return pp->msi_irq;
-
- ret = devm_request_irq(&pdev->dev, pp->msi_irq,
- synopsys_pcie_msi_irq_handler,
- IRQF_SHARED, "synopsys-pcie-msi", pp);
- if (ret) {
- dev_err(&pdev->dev, "failed to request MSI IRQ %d\n",
- pp->msi_irq);
- return ret;
- }
- }
-
- pp->root_bus_nr = -1;
- pp->ops = &synopsys_pcie_host_ops;
-
- /* Below function:
- * Checks for range property from DT
- * Gets the IO and MEMORY and CONFIG-Space ranges from DT
- * Does IOREMAPS on the physical addresses
- * Gets the num-lanes from DT
- * Gets MSI capability from DT
- * Calls the platform specific host initialization
- * Program the correct class, BAR0, Link width, in Config space
- * Then it calls pci common init routine
- * Then it calls function to assign "unassigned resources"
- */
- ret = dw_pcie_host_init(pp);
- if (ret) {
- dev_err(&pdev->dev, "failed to initialize host\n");
- return ret;
- }
-
- return 0;
-}
-
-/**
- * synopsys_pcie_probe()
- * This function gets called as part of PCIe registration. If the ID matches
- * the platform driver framework will call this function.
- *
- * @pdev: Pointer to the platform_device structure
- *
- * Returns zero on success; Negative errno on failure
- */
-static int synopsys_pcie_probe(struct platform_device *pdev)
-{
- struct synopsys_pcie *synopsys_pcie;
- struct pcie_port *pp;
- struct resource *res;
- int ret;
-
- synopsys_pcie = devm_kzalloc(&pdev->dev, sizeof(*synopsys_pcie),
- GFP_KERNEL);
- if (!synopsys_pcie)
- return -ENOMEM;
-
- pp = &synopsys_pcie->pp;
- pp->dev = &pdev->dev;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- return -ENODEV;
-
- synopsys_pcie->mem_base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(synopsys_pcie->mem_base))
- return PTR_ERR(synopsys_pcie->mem_base);
-
- pp->dbi_base = synopsys_pcie->mem_base;
-
- ret = synopsys_add_pcie_port(pp, pdev);
- if (ret < 0)
- return ret;
-
- platform_set_drvdata(pdev, synopsys_pcie);
-
- return 0;
-}
-
-static const struct of_device_id synopsys_pcie_of_match[] = {
- { .compatible = "snps,pcie-synopsys", },
- {},
-};
-MODULE_DEVICE_TABLE(of, synopsys_pcie_of_match);
-
-static struct platform_driver synopsys_pcie_driver = {
- .driver = {
- .name = "pcie-synopsys",
- .of_match_table = synopsys_pcie_of_match,
- },
- .probe = synopsys_pcie_probe,
-};
-
-module_platform_driver(synopsys_pcie_driver);
-
-MODULE_AUTHOR("Manjunath Bettegowda <manjumb@synopsys.com>");
-MODULE_DESCRIPTION("Synopsys PCIe host controller driver");
-MODULE_LICENSE("GPL v2");
The patch work consisted of: - driver name was changed from pcie-synopsys to pcie-dw-pltfm - mdelay() replaced for msleep() in the new driver - Devicetree bindings for the new driver was updated (config space removed from ranges and new compatibility strings were introduced) - Unnecessary synopsys_pcie_irq_handler() was removed - Driver compatibility strings updated Signed-off-by: Joao Pinto <jpinto@synopsys.com> --- .../bindings/pci/pcie-designware-pltfm.txt | 37 +++ .../devicetree/bindings/pci/pcie-synopsys.txt | 33 --- drivers/pci/host/Kconfig | 8 +- drivers/pci/host/Makefile | 2 +- drivers/pci/host/pcie-designware-pltfm.c | 239 ++++++++++++++++++++ drivers/pci/host/pcie-synopsys.c | 250 --------------------- 6 files changed, 281 insertions(+), 288 deletions(-) create mode 100644 Documentation/devicetree/bindings/pci/pcie-designware-pltfm.txt delete mode 100644 Documentation/devicetree/bindings/pci/pcie-synopsys.txt create mode 100644 drivers/pci/host/pcie-designware-pltfm.c delete mode 100644 drivers/pci/host/pcie-synopsys.c