@@ -77,33 +77,6 @@ MODULE_PARM_DESC(debug, "Debugging mode enabled or not");
#define CPQHPC_MODULE_MINOR 208
-static int one_time_init (void);
-static int set_attention_status (struct hotplug_slot *slot, u8 value);
-static int process_SI (struct hotplug_slot *slot);
-static int process_SS (struct hotplug_slot *slot);
-static int hardware_test (struct hotplug_slot *slot, u32 value);
-static int get_power_status (struct hotplug_slot *slot, u8 *value);
-static int get_attention_status (struct hotplug_slot *slot, u8 *value);
-static int get_latch_status (struct hotplug_slot *slot, u8 *value);
-static int get_adapter_status (struct hotplug_slot *slot, u8 *value);
-static int get_max_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value);
-static int get_cur_bus_speed (struct hotplug_slot *slot, enum pci_bus_speed *value);
-
-static struct hotplug_slot_ops cpqphp_hotplug_slot_ops = {
- .owner = THIS_MODULE,
- .set_attention_status = set_attention_status,
- .enable_slot = process_SI,
- .disable_slot = process_SS,
- .hardware_test = hardware_test,
- .get_power_status = get_power_status,
- .get_attention_status = get_attention_status,
- .get_latch_status = get_latch_status,
- .get_adapter_status = get_adapter_status,
- .get_max_bus_speed = get_max_bus_speed,
- .get_cur_bus_speed = get_cur_bus_speed,
-};
-
-
static inline int is_slot64bit(struct slot *slot)
{
return (readb(slot->p_sm_slot + SMBIOS_SLOT_WIDTH) == 0x06) ? 1 : 0;
@@ -322,145 +295,6 @@ static void release_slot(struct hotplug_slot *hotplug_slot)
kfree(slot);
}
-#define SLOT_NAME_SIZE 10
-
-static int ctrl_slot_setup(struct controller *ctrl,
- void __iomem *smbios_start,
- void __iomem *smbios_table)
-{
- struct slot *slot;
- struct hotplug_slot *hotplug_slot;
- struct hotplug_slot_info *hotplug_slot_info;
- u8 number_of_slots;
- u8 slot_device;
- u8 slot_number;
- u8 ctrl_slot;
- u32 tempdword;
- char name[SLOT_NAME_SIZE];
- void __iomem *slot_entry= NULL;
- int result = -ENOMEM;
-
- dbg("%s\n", __func__);
-
- tempdword = readl(ctrl->hpc_reg + INT_INPUT_CLEAR);
-
- number_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0F;
- slot_device = readb(ctrl->hpc_reg + SLOT_MASK) >> 4;
- slot_number = ctrl->first_slot;
-
- while (number_of_slots) {
- slot = kzalloc(sizeof(*slot), GFP_KERNEL);
- if (!slot)
- goto error;
-
- slot->hotplug_slot = kzalloc(sizeof(*(slot->hotplug_slot)),
- GFP_KERNEL);
- if (!slot->hotplug_slot)
- goto error_slot;
- hotplug_slot = slot->hotplug_slot;
-
- hotplug_slot->info =
- kzalloc(sizeof(*(hotplug_slot->info)),
- GFP_KERNEL);
- if (!hotplug_slot->info)
- goto error_hpslot;
- hotplug_slot_info = hotplug_slot->info;
-
- slot->ctrl = ctrl;
- slot->bus = ctrl->bus;
- slot->device = slot_device;
- slot->number = slot_number;
- dbg("slot->number = %u\n", slot->number);
-
- slot_entry = get_SMBIOS_entry(smbios_start, smbios_table, 9,
- slot_entry);
-
- while (slot_entry && (readw(slot_entry + SMBIOS_SLOT_NUMBER) !=
- slot->number)) {
- slot_entry = get_SMBIOS_entry(smbios_start,
- smbios_table, 9, slot_entry);
- }
-
- slot->p_sm_slot = slot_entry;
-
- init_timer(&slot->task_event);
- slot->task_event.expires = jiffies + 5 * HZ;
- slot->task_event.function = cpqhp_pushbutton_thread;
-
- /*FIXME: these capabilities aren't used but if they are
- * they need to be correctly implemented
- */
- slot->capabilities |= PCISLOT_REPLACE_SUPPORTED;
- slot->capabilities |= PCISLOT_INTERLOCK_SUPPORTED;
-
- if (is_slot64bit(slot))
- slot->capabilities |= PCISLOT_64_BIT_SUPPORTED;
- if (is_slot66mhz(slot))
- slot->capabilities |= PCISLOT_66_MHZ_SUPPORTED;
- if (ctrl->speed == PCI_SPEED_66MHz)
- slot->capabilities |= PCISLOT_66_MHZ_OPERATION;
-
- ctrl_slot =
- slot_device - (readb(ctrl->hpc_reg + SLOT_MASK) >> 4);
-
- /* Check presence */
- slot->capabilities |=
- ((((~tempdword) >> 23) |
- ((~tempdword) >> 15)) >> ctrl_slot) & 0x02;
- /* Check the switch state */
- slot->capabilities |=
- ((~tempdword & 0xFF) >> ctrl_slot) & 0x01;
- /* Check the slot enable */
- slot->capabilities |=
- ((read_slot_enable(ctrl) << 2) >> ctrl_slot) & 0x04;
-
- /* register this slot with the hotplug pci core */
- hotplug_slot->release = &release_slot;
- hotplug_slot->private = slot;
- snprintf(name, SLOT_NAME_SIZE, "%u", slot->number);
- hotplug_slot->ops = &cpqphp_hotplug_slot_ops;
-
- hotplug_slot_info->power_status = get_slot_enabled(ctrl, slot);
- hotplug_slot_info->attention_status =
- cpq_get_attention_status(ctrl, slot);
- hotplug_slot_info->latch_status =
- cpq_get_latch_status(ctrl, slot);
- hotplug_slot_info->adapter_status =
- get_presence_status(ctrl, slot);
-
- dbg("registering bus %d, dev %d, number %d, "
- "ctrl->slot_device_offset %d, slot %d\n",
- slot->bus, slot->device,
- slot->number, ctrl->slot_device_offset,
- slot_number);
- result = pci_hp_register(hotplug_slot,
- ctrl->pci_dev->bus,
- slot->device,
- name);
- if (result) {
- err("pci_hp_register failed with error %d\n", result);
- goto error_info;
- }
-
- slot->next = ctrl->slot;
- ctrl->slot = slot;
-
- number_of_slots--;
- slot_device++;
- slot_number++;
- }
-
- return 0;
-error_info:
- kfree(hotplug_slot_info);
-error_hpslot:
- kfree(hotplug_slot);
-error_slot:
- kfree(slot);
-error:
- return result;
-}
-
static int ctrl_slot_cleanup (struct controller * ctrl)
{
struct slot *old_slot, *next_slot;
@@ -793,6 +627,230 @@ static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_sp
return 0;
}
+static struct hotplug_slot_ops cpqphp_hotplug_slot_ops = {
+ .owner = THIS_MODULE,
+ .set_attention_status = set_attention_status,
+ .enable_slot = process_SI,
+ .disable_slot = process_SS,
+ .hardware_test = hardware_test,
+ .get_power_status = get_power_status,
+ .get_attention_status = get_attention_status,
+ .get_latch_status = get_latch_status,
+ .get_adapter_status = get_adapter_status,
+ .get_max_bus_speed = get_max_bus_speed,
+ .get_cur_bus_speed = get_cur_bus_speed,
+};
+
+#define SLOT_NAME_SIZE 10
+
+static int ctrl_slot_setup(struct controller *ctrl,
+ void __iomem *smbios_start,
+ void __iomem *smbios_table)
+{
+ struct slot *slot;
+ struct hotplug_slot *hotplug_slot;
+ struct hotplug_slot_info *hotplug_slot_info;
+ u8 number_of_slots;
+ u8 slot_device;
+ u8 slot_number;
+ u8 ctrl_slot;
+ u32 tempdword;
+ char name[SLOT_NAME_SIZE];
+ void __iomem *slot_entry= NULL;
+ int result = -ENOMEM;
+
+ dbg("%s\n", __func__);
+
+ tempdword = readl(ctrl->hpc_reg + INT_INPUT_CLEAR);
+
+ number_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0F;
+ slot_device = readb(ctrl->hpc_reg + SLOT_MASK) >> 4;
+ slot_number = ctrl->first_slot;
+
+ while (number_of_slots) {
+ slot = kzalloc(sizeof(*slot), GFP_KERNEL);
+ if (!slot)
+ goto error;
+
+ slot->hotplug_slot = kzalloc(sizeof(*(slot->hotplug_slot)),
+ GFP_KERNEL);
+ if (!slot->hotplug_slot)
+ goto error_slot;
+ hotplug_slot = slot->hotplug_slot;
+
+ hotplug_slot->info =
+ kzalloc(sizeof(*(hotplug_slot->info)),
+ GFP_KERNEL);
+ if (!hotplug_slot->info)
+ goto error_hpslot;
+ hotplug_slot_info = hotplug_slot->info;
+
+ slot->ctrl = ctrl;
+ slot->bus = ctrl->bus;
+ slot->device = slot_device;
+ slot->number = slot_number;
+ dbg("slot->number = %u\n", slot->number);
+
+ slot_entry = get_SMBIOS_entry(smbios_start, smbios_table, 9,
+ slot_entry);
+
+ while (slot_entry && (readw(slot_entry + SMBIOS_SLOT_NUMBER) !=
+ slot->number)) {
+ slot_entry = get_SMBIOS_entry(smbios_start,
+ smbios_table, 9, slot_entry);
+ }
+
+ slot->p_sm_slot = slot_entry;
+
+ init_timer(&slot->task_event);
+ slot->task_event.expires = jiffies + 5 * HZ;
+ slot->task_event.function = cpqhp_pushbutton_thread;
+
+ /*FIXME: these capabilities aren't used but if they are
+ * they need to be correctly implemented
+ */
+ slot->capabilities |= PCISLOT_REPLACE_SUPPORTED;
+ slot->capabilities |= PCISLOT_INTERLOCK_SUPPORTED;
+
+ if (is_slot64bit(slot))
+ slot->capabilities |= PCISLOT_64_BIT_SUPPORTED;
+ if (is_slot66mhz(slot))
+ slot->capabilities |= PCISLOT_66_MHZ_SUPPORTED;
+ if (ctrl->speed == PCI_SPEED_66MHz)
+ slot->capabilities |= PCISLOT_66_MHZ_OPERATION;
+
+ ctrl_slot =
+ slot_device - (readb(ctrl->hpc_reg + SLOT_MASK) >> 4);
+
+ /* Check presence */
+ slot->capabilities |=
+ ((((~tempdword) >> 23) |
+ ((~tempdword) >> 15)) >> ctrl_slot) & 0x02;
+ /* Check the switch state */
+ slot->capabilities |=
+ ((~tempdword & 0xFF) >> ctrl_slot) & 0x01;
+ /* Check the slot enable */
+ slot->capabilities |=
+ ((read_slot_enable(ctrl) << 2) >> ctrl_slot) & 0x04;
+
+ /* register this slot with the hotplug pci core */
+ hotplug_slot->release = &release_slot;
+ hotplug_slot->private = slot;
+ snprintf(name, SLOT_NAME_SIZE, "%u", slot->number);
+ hotplug_slot->ops = &cpqphp_hotplug_slot_ops;
+
+ hotplug_slot_info->power_status = get_slot_enabled(ctrl, slot);
+ hotplug_slot_info->attention_status =
+ cpq_get_attention_status(ctrl, slot);
+ hotplug_slot_info->latch_status =
+ cpq_get_latch_status(ctrl, slot);
+ hotplug_slot_info->adapter_status =
+ get_presence_status(ctrl, slot);
+
+ dbg("registering bus %d, dev %d, number %d, "
+ "ctrl->slot_device_offset %d, slot %d\n",
+ slot->bus, slot->device,
+ slot->number, ctrl->slot_device_offset,
+ slot_number);
+ result = pci_hp_register(hotplug_slot,
+ ctrl->pci_dev->bus,
+ slot->device,
+ name);
+ if (result) {
+ err("pci_hp_register failed with error %d\n", result);
+ goto error_info;
+ }
+
+ slot->next = ctrl->slot;
+ ctrl->slot = slot;
+
+ number_of_slots--;
+ slot_device++;
+ slot_number++;
+ }
+
+ return 0;
+error_info:
+ kfree(hotplug_slot_info);
+error_hpslot:
+ kfree(hotplug_slot);
+error_slot:
+ kfree(slot);
+error:
+ return result;
+}
+
+static int one_time_init(void)
+{
+ int loop;
+ int retval = 0;
+
+ if (initialized)
+ return 0;
+
+ power_mode = 0;
+
+ retval = pci_print_IRQ_route();
+ if (retval)
+ goto error;
+
+ dbg("Initialize + Start the notification mechanism \n");
+
+ retval = cpqhp_event_start_thread();
+ if (retval)
+ goto error;
+
+ dbg("Initialize slot lists\n");
+ for (loop = 0; loop < 256; loop++) {
+ cpqhp_slot_list[loop] = NULL;
+ }
+
+ /* FIXME: We also need to hook the NMI handler eventually.
+ * this also needs to be worked with Christoph
+ * register_NMI_handler();
+ */
+ /* Map rom address */
+ cpqhp_rom_start = ioremap(ROM_PHY_ADDR, ROM_PHY_LEN);
+ if (!cpqhp_rom_start) {
+ err ("Could not ioremap memory region for ROM\n");
+ retval = -EIO;
+ goto error;
+ }
+
+ /* Now, map the int15 entry point if we are on compaq specific
+ * hardware
+ */
+ compaq_nvram_init(cpqhp_rom_start);
+
+ /* Map smbios table entry point structure */
+ smbios_table = detect_SMBIOS_pointer(cpqhp_rom_start,
+ cpqhp_rom_start + ROM_PHY_LEN);
+ if (!smbios_table) {
+ err ("Could not find the SMBIOS pointer in memory\n");
+ retval = -EIO;
+ goto error_rom_start;
+ }
+
+ smbios_start = ioremap(readl(smbios_table + ST_ADDRESS),
+ readw(smbios_table + ST_LENGTH));
+ if (!smbios_start) {
+ err ("Could not ioremap memory region taken from SMBIOS values\n");
+ retval = -EIO;
+ goto error_smbios_start;
+ }
+
+ initialized = 1;
+
+ return retval;
+
+error_smbios_start:
+ iounmap(smbios_start);
+error_rom_start:
+ iounmap(cpqhp_rom_start);
+error:
+ return retval;
+}
+
static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
u8 num_of_slots = 0;
@@ -1300,77 +1358,6 @@ err_disable_device:
return rc;
}
-static int one_time_init(void)
-{
- int loop;
- int retval = 0;
-
- if (initialized)
- return 0;
-
- power_mode = 0;
-
- retval = pci_print_IRQ_route();
- if (retval)
- goto error;
-
- dbg("Initialize + Start the notification mechanism \n");
-
- retval = cpqhp_event_start_thread();
- if (retval)
- goto error;
-
- dbg("Initialize slot lists\n");
- for (loop = 0; loop < 256; loop++) {
- cpqhp_slot_list[loop] = NULL;
- }
-
- /* FIXME: We also need to hook the NMI handler eventually.
- * this also needs to be worked with Christoph
- * register_NMI_handler();
- */
- /* Map rom address */
- cpqhp_rom_start = ioremap(ROM_PHY_ADDR, ROM_PHY_LEN);
- if (!cpqhp_rom_start) {
- err ("Could not ioremap memory region for ROM\n");
- retval = -EIO;
- goto error;
- }
-
- /* Now, map the int15 entry point if we are on compaq specific
- * hardware
- */
- compaq_nvram_init(cpqhp_rom_start);
-
- /* Map smbios table entry point structure */
- smbios_table = detect_SMBIOS_pointer(cpqhp_rom_start,
- cpqhp_rom_start + ROM_PHY_LEN);
- if (!smbios_table) {
- err ("Could not find the SMBIOS pointer in memory\n");
- retval = -EIO;
- goto error_rom_start;
- }
-
- smbios_start = ioremap(readl(smbios_table + ST_ADDRESS),
- readw(smbios_table + ST_LENGTH));
- if (!smbios_start) {
- err ("Could not ioremap memory region taken from SMBIOS values\n");
- retval = -EIO;
- goto error_smbios_start;
- }
-
- initialized = 1;
-
- return retval;
-
-error_smbios_start:
- iounmap(smbios_start);
-error_rom_start:
- iounmap(cpqhp_rom_start);
-error:
- return retval;
-}
-
static void __exit unload_cpqphpd(void)
{
struct pci_func *next;
Impact: refactor Refactor code to follow convention more closely and eliminate the need for some useless prototypes. No functional change. Signed-off-by: Alex Chiang <achiang@hp.com> --- drivers/pci/hotplug/cpqphp_core.c | 461 ++++++++++++++++++------------------- 1 files changed, 224 insertions(+), 237 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html