@@ -455,6 +455,7 @@ extern int cpqhp_debug;
extern int cpqhp_legacy_mode;
extern struct controller *cpqhp_ctrl_list;
extern struct pci_func *cpqhp_slot_list[256];
+extern struct irq_routing_table *cpqhp_routing_table;
/* these can be gotten rid of, but for debugging they are purty */
extern u8 cpqhp_nic_irq;
@@ -733,4 +734,12 @@ static inline int wait_for_ctrl_irq(struct controller *ctrl)
return retval;
}
+#include <asm/pci_x86.h>
+static inline int cpqhp_routing_table_length(void)
+{
+ BUG_ON(cpqhp_routing_table == NULL);
+ return ((cpqhp_routing_table->size - sizeof(struct irq_routing_table)) /
+ sizeof(struct irq_info));
+}
+
#endif
@@ -44,7 +44,6 @@
#include "cpqphp.h"
#include "cpqphp_nvram.h"
-#include <asm/pci_x86.h>
/* Global variables */
@@ -52,6 +51,7 @@ int cpqhp_debug;
int cpqhp_legacy_mode;
struct controller *cpqhp_ctrl_list; /* = NULL */
struct pci_func *cpqhp_slot_list[256];
+struct irq_routing_table *cpqhp_routing_table;
/* local variables */
static void __iomem *smbios_table;
@@ -154,40 +154,42 @@ static int init_SERR(struct controller * ctrl)
return 0;
}
-/* nice debugging output */
-static int pci_print_IRQ_route (void)
+static int init_cpqhp_routing_table(void)
{
- struct irq_routing_table *routing_table;
int len;
- int loop;
-
- u8 tbus, tdevice, tslot;
- routing_table = pcibios_get_irq_routing_table();
- if (routing_table == NULL) {
- err("No BIOS Routing Table??? Not good\n");
+ cpqhp_routing_table = pcibios_get_irq_routing_table();
+ if (cpqhp_routing_table == NULL)
return -ENOMEM;
- }
- len = (routing_table->size - sizeof(struct irq_routing_table)) /
- sizeof(struct irq_info);
- /* Make sure I got at least one entry */
+ len = cpqhp_routing_table_length();
if (len == 0) {
- kfree(routing_table);
+ kfree(cpqhp_routing_table);
+ cpqhp_routing_table = NULL;
return -1;
}
- dbg("bus dev func slot\n");
+ return 0;
+}
+
+/* nice debugging output */
+static void pci_print_IRQ_route(void)
+{
+ int len;
+ int loop;
+ u8 tbus, tdevice, tslot;
+
+ len = cpqhp_routing_table_length();
+ dbg("bus dev func slot\n");
for (loop = 0; loop < len; ++loop) {
- tbus = routing_table->slots[loop].bus;
- tdevice = routing_table->slots[loop].devfn;
- tslot = routing_table->slots[loop].slot;
+ tbus = cpqhp_routing_table->slots[loop].bus;
+ tdevice = cpqhp_routing_table->slots[loop].devfn;
+ tslot = cpqhp_routing_table->slots[loop].slot;
dbg("%d %d %d %d\n", tbus, tdevice >> 3, tdevice & 0x7, tslot);
}
- kfree(routing_table);
- return 0;
+ return;
}
@@ -331,7 +333,6 @@ static int ctrl_slot_cleanup (struct controller * ctrl)
static int
get_slot_mapping(struct pci_bus *bus, u8 bus_num, u8 dev_num, u8 *slot)
{
- struct irq_routing_table *PCIIRQRoutingInfoLength;
u32 work;
long len;
long loop;
@@ -342,26 +343,14 @@ get_slot_mapping(struct pci_bus *bus, u8 bus_num, u8 dev_num, u8 *slot)
bridgeSlot = 0xFF;
- PCIIRQRoutingInfoLength = pcibios_get_irq_routing_table();
- if (!PCIIRQRoutingInfoLength)
- return -1;
-
- len = (PCIIRQRoutingInfoLength->size -
- sizeof(struct irq_routing_table)) / sizeof(struct irq_info);
- /* Make sure I got at least one entry */
- if (len == 0) {
- kfree(PCIIRQRoutingInfoLength);
- return -1;
- }
-
+ len = cpqhp_routing_table_length();
for (loop = 0; loop < len; ++loop) {
- tbus = PCIIRQRoutingInfoLength->slots[loop].bus;
- tdevice = PCIIRQRoutingInfoLength->slots[loop].devfn >> 3;
- tslot = PCIIRQRoutingInfoLength->slots[loop].slot;
+ tbus = cpqhp_routing_table->slots[loop].bus;
+ tdevice = cpqhp_routing_table->slots[loop].devfn >> 3;
+ tslot = cpqhp_routing_table->slots[loop].slot;
if ((tbus == bus_num) && (tdevice == dev_num)) {
*slot = tslot;
- kfree(PCIIRQRoutingInfoLength);
return 0;
} else {
/* Did not get a match on the target PCI device. Check
@@ -396,10 +385,8 @@ get_slot_mapping(struct pci_bus *bus, u8 bus_num, u8 dev_num, u8 *slot)
*/
if (bridgeSlot != 0xFF) {
*slot = bridgeSlot;
- kfree(PCIIRQRoutingInfoLength);
return 0;
}
- kfree(PCIIRQRoutingInfoLength);
/* Couldn't find an entry in the routing table for this PCI device */
return -1;
}
@@ -782,10 +769,13 @@ static int one_time_init(void)
power_mode = 0;
- retval = pci_print_IRQ_route();
+ retval = init_cpqhp_routing_table();
if (retval)
goto error;
+ if (cpqhp_debug)
+ pci_print_IRQ_route();
+
dbg("Initialize + Start the notification mechanism \n");
retval = cpqhp_event_start_thread();
@@ -37,7 +37,6 @@
#include "../pci.h"
#include "cpqphp.h"
#include "cpqphp_nvram.h"
-#include <asm/pci_x86.h>
u8 cpqhp_nic_irq;
@@ -244,39 +243,23 @@ static int PCI_ScanBusForNonBridge(struct controller *ctrl, u8 bus_num, u8 * dev
static int PCI_GetBusDevHelper(struct controller *ctrl, u8 *bus_num, u8 *dev_num, u8 slot, u8 nobridge)
{
- struct irq_routing_table *PCIIRQRoutingInfoLength;
- long len;
- long loop;
+ int loop, len;
u32 work;
-
u8 tbus, tdevice, tslot;
- PCIIRQRoutingInfoLength = pcibios_get_irq_routing_table();
- if (!PCIIRQRoutingInfoLength)
- return -1;
-
- len = (PCIIRQRoutingInfoLength->size -
- sizeof(struct irq_routing_table)) / sizeof(struct irq_info);
- /* Make sure I got at least one entry */
- if (len == 0) {
- kfree(PCIIRQRoutingInfoLength );
- return -1;
- }
-
+ len = cpqhp_routing_table_length();
for (loop = 0; loop < len; ++loop) {
- tbus = PCIIRQRoutingInfoLength->slots[loop].bus;
- tdevice = PCIIRQRoutingInfoLength->slots[loop].devfn;
- tslot = PCIIRQRoutingInfoLength->slots[loop].slot;
+ tbus = cpqhp_routing_table->slots[loop].bus;
+ tdevice = cpqhp_routing_table->slots[loop].devfn;
+ tslot = cpqhp_routing_table->slots[loop].slot;
if (tslot == slot) {
*bus_num = tbus;
*dev_num = tdevice;
ctrl->pci_bus->number = tbus;
pci_bus_read_config_dword (ctrl->pci_bus, *dev_num, PCI_VENDOR_ID, &work);
- if (!nobridge || (work == 0xffffffff)) {
- kfree(PCIIRQRoutingInfoLength );
+ if (!nobridge || (work == 0xffffffff))
return 0;
- }
dbg("bus_num %d devfn %d\n", *bus_num, *dev_num);
pci_bus_read_config_dword (ctrl->pci_bus, *dev_num, PCI_CLASS_REVISION, &work);
@@ -287,17 +270,12 @@ static int PCI_GetBusDevHelper(struct controller *ctrl, u8 *bus_num, u8 *dev_num
dbg("Scan bus for Non Bridge: bus %d\n", tbus);
if (PCI_ScanBusForNonBridge(ctrl, tbus, dev_num) == 0) {
*bus_num = tbus;
- kfree(PCIIRQRoutingInfoLength );
return 0;
}
- } else {
- kfree(PCIIRQRoutingInfoLength );
+ } else
return 0;
- }
-
}
}
- kfree(PCIIRQRoutingInfoLength );
return -1;
}
Instead of making multiple calls to pcibios_get_irq_routing_table, let's just do it once and save the answer. The reason we were making multiple calls is because we liked to calculate its length and perform some loop over it. Instead of open-coding the length calculation every time, provide it in an inline helper function. Finally, since pci_print_IRQ_route() is used only for debug, let's only do it when cpqhp_debug is set. Signed-off-by: Alex Chiang <achiang@hp.com> --- drivers/pci/hotplug/cpqphp.h | 9 +++++ drivers/pci/hotplug/cpqphp_core.c | 72 ++++++++++++++++--------------------- drivers/pci/hotplug/cpqphp_pci.c | 36 ++++--------------- 3 files changed, 47 insertions(+), 70 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html