| Message ID | 20120702053110.GA2500@redhat.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
On Mon, Jul 2, 2012 at 6:31 AM, Stanislaw Gruszka <sgruszka@redhat.com> wrote: > On Sun, Jul 01, 2012 at 07:01:58PM +0100, Kamil Grzebien wrote: >> I haven't tried your patch yet, but wanted to share with one thing. >> Currently I use new kernel 3.4.3, where the problem doesn't exist >> anymore. However I still would like to know what was the cause and >> which change brought the solution. Is there anything which comes to >> your mind in terms of recent changes in kernel? I also added logs from >> the newest kernel, so it might be easier for track it. > > Below is the diff from working kernel and non working kernel. > You are using PAE kernel what influence PCI mappings. Is this fixed also > on 3.4 non-PAE kernel? The problem is also fixed in non-PAE kernel. I've attached the logs from that kernel also. Besides that currently I was comparing both PAE kernels installed on my machine - kernel 3.3.7 (problem exist) and kernel 3.4.3 (problem solved). There must be something that has changed either in the code or maybe kernel configuration!? Regards, Kamil > > Stanislaw > > --- bad/dmesg.log 2012-05-28 15:12:13.559424823 +0200 > +++ dmesg.log 2012-07-02 07:22:35.534393336 +0200 > @@ -1,6 +1,6 @@ > Initializing cgroup subsys cpuset > Initializing cgroup subsys cpu > -Linux version 3.3.0-4.fc16.i686 (mockbuild@x86-04.phx2.fedoraproject.org) (gcc version 4.6.2 20111027 (Red Hat 4.6.2-1) (GCC) ) #1 SMP Tue Mar 20 18:45:14 UTC 2012 > +Linux version 3.4.3-1.fc17.i686.PAE (mockbuild@x86-04.phx2.fedoraproject.org) (gcc version 4.7.0 20120507 (Red Hat 4.7.0-5) (GCC) ) #1 SMP Mon Jun 18 20:31:39 UTC 2012 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009f000 (usable) > BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) > @@ -14,12 +14,12 @@ BIOS-provided physical RAM map: > BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) > BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) > BIOS-e820: 0000000100000000 - 0000000120000000 (usable) > -Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! > +NX (Execute Disable) protection: active > DMI 2.4 present. > DMI: Dell Inc. XPS M1530 /0D501F, BIOS A12 11/19/2008 > e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) > e820 remove range: 00000000000a0000 - 0000000000100000 (usable) > -last_pfn = 0xdfe72 max_arch_pfn = 0x100000 > +last_pfn = 0x120000 max_arch_pfn = 0x1000000 > MTRR default type: uncachable > MTRR fixed ranges enabled: > 00000-9FFFF write-back > @@ -52,14 +52,14 @@ reg 1, base: 3583MB, range: 1MB, type UC > reg 2, base: 3584MB, range: 512MB, type UC > reg 3, base: 4GB, range: 512MB, type WB > e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved) > -initial memory mapped : 0 - 01000000 > -9b000 size 16384 > -init_memory_mapping: 0000000000000000-00000000373fe000 > - 0000000000 - 0000400000 page 4k > - 0000400000 - 0037000000 page 2M > - 0037000000 - 00373fe000 page 4k > -kernel direct mapping tables up to 373fe000 @ ffa000-1000000 > -RAMDISK: 35f5c000 - 36fa6000 > +initial memory mapped : 0 - 01200000 > +Base memory trampoline at [c009b000] 9b000 size 16384 > +init_memory_mapping: 0000000000000000-00000000375fe000 > + 0000000000 - 0000200000 page 4k > + 0000200000 - 0037400000 page 2M > + 0037400000 - 00375fe000 page 4k > +kernel direct mapping tables up to 375fe000 @ 11f8000-1200000 > +RAMDISK: 3615c000 - 370a6000 > ACPI: RSDP 000fbc90 00024 (v02 DELL ) > ACPI: XSDT dfe73a00 00064 (v01 DELL M08 27D80B13 ASL 00000061) > ACPI: FACP dfe7389c 000F4 (v04 DELL M08 27D80B13 ASL 00000061) > @@ -73,35 +73,36 @@ ACPI: OSFR dfe73200 0002C (v01 DELL M > ACPI: BOOT dfe737c0 00028 (v01 DELL M08 27D80B13 ASL 00000061) > ACPI: SSDT dfe7217e 004CC (v01 PmRef CpuPm 00003000 INTL 20050624) > ACPI: Local APIC address 0xfee00000 > -2698MB HIGHMEM available. > -883MB LOWMEM available. > - mapped low ram: 0 - 373fe000 > - low ram: 0 - 373fe000 > +3722MB HIGHMEM available. > +885MB LOWMEM available. > + mapped low ram: 0 - 375fe000 > + low ram: 0 - 375fe000 > Zone PFN ranges: > DMA 0x00000010 -> 0x00001000 > - Normal 0x00001000 -> 0x000373fe > - HighMem 0x000373fe -> 0x000dfe72 > + Normal 0x00001000 -> 0x000375fe > + HighMem 0x000375fe -> 0x00120000 > Movable zone start PFN for each node > Early memory PFN ranges > 0: 0x00000010 -> 0x0000009f > 0: 0x00000100 -> 0x000dfe72 > -On node 0 totalpages: 916993 > -free_area_init_node: node 0, pgdat c0ba2f00, node_mem_map f435c200 > + 0: 0x00100000 -> 0x00120000 > +On node 0 totalpages: 1048065 > +free_area_init_node: node 0, pgdat c0bd0d40, node_mem_map f3d5c200 > DMA zone: 32 pages used for memmap > DMA zone: 0 pages reserved > DMA zone: 3951 pages, LIFO batch:0 > - Normal zone: 1736 pages used for memmap > - Normal zone: 220470 pages, LIFO batch:31 > - HighMem zone: 5397 pages used for memmap > - HighMem zone: 685407 pages, LIFO batch:31 > + Normal zone: 1740 pages used for memmap > + Normal zone: 220978 pages, LIFO batch:31 > + HighMem zone: 7445 pages used for memmap > + HighMem zone: 813919 pages, LIFO batch:31 > Using APIC driver default > ACPI: PM-Timer IO Port: 0x1008 > ACPI: Local APIC address 0xfee00000 > -enabled) > -enabled) > -high edge lint[0x1]) > -high edge lint[0x1]) > -gsi_base[0]) > +ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > +ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > +ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > +ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > +ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > @@ -117,40 +118,39 @@ PM: Registered nosave memory: 0000000000 > Allocating PCI resources starting at e0000000 (gap: e0000000:18000000) > Booting paravirtualized kernel on bare hardware > setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 > -PERCPU: Embedded 13 pages/cpu @f3c00000 s31168 r0 d22080 u2097152 > -pcpu-alloc: s31168 r0 d22080 u2097152 alloc=1*4194304 > -0 1 > -Built 1 zonelists in Zone order, mobility grouping on. Total pages: 909828 > -Kernel command line: BOOT_IMAGE=/vmlinuz-3.3.0-4.fc16.i686 root=UUID=7417d839-a647-466e-b57d-fc65d20a6342 ro rd.md=0 rd.lvm=0 rd.dm=0 quiet SYSFONT=latarcyrheb-sun16 rhgb rd.luks=0 KEYTABLE=pl2 LANG=en_US.UTF-8 > +PERCPU: Embedded 14 pages/cpu @f75cf000 s34112 r0 d23232 u57344 > +pcpu-alloc: s34112 r0 d23232 u57344 alloc=14*4096 > +pcpu-alloc: [0] 0 [0] 1 > +Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1038848 > +Kernel command line: BOOT_IMAGE=/vmlinuz-3.4.3-1.fc17.i686.PAE root=UUID=29c27e52-ab08-4c1a-9ed7-86ab260b207b ro rd.md=0 rd.lvm=0 rd.dm=0 SYSFONT=True KEYTABLE=pl2 rd.luks=0 LANG=pl_PL.UTF-8 rhgb quiet > PID hash table entries: 4096 (order: 2, 16384 bytes) > Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > Initializing CPU#0 > -allocated 7336720 bytes of page_cgroup > +allocated 9437056 bytes of page_cgroup > please try 'cgroup_disable=memory' option if you don't want memory cgroups > -Initializing HighMem for node 0 (000373fe:000dfe72) > -Memory: 3605028k/3668424k available (5337k kernel code, 62944k reserved, 2570k data, 620k init, 2763216k highmem) > +Initializing HighMem for node 0 (000375fe:00120000) > +Memory: 4119724k/4718592k available (5442k kernel code, 72536k reserved, 2650k data, 640k init, 3285456k highmem) > virtual kernel memory layout: > fixmap : 0xffa96000 - 0xfffff000 (5540 kB) > - pkmap : 0xff400000 - 0xff800000 (4096 kB) > - vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) > - lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) > - .init : 0xc0bb9000 - 0xc0c54000 ( 620 kB) > - .data : 0xc093671f - 0xc0bb8f80 (2570 kB) > - .text : 0xc0400000 - 0xc093671f (5337 kB) > + pkmap : 0xff600000 - 0xff800000 (2048 kB) > + vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB) > + lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB) > + .init : 0xc0be8000 - 0xc0c88000 ( 640 kB) > + .data : 0xc0950a93 - 0xc0be7480 (2650 kB) > + .text : 0xc0400000 - 0xc0950a93 (5442 kB) > Checking if this processor honours the WP bit even in supervisor mode...Ok. > SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 > Hierarchical RCU implementation. > - RCU dyntick-idle grace-period acceleration is enabled. > NR_IRQS:2304 nr_irqs:512 16 > CPU 0 irqstacks, hard=f3008000 soft=f300a000 > Extended CMOS year: 2000 > Console: colour dummy device 80x25 > -enabled > +console [tty0] enabled > hpet clockevent registered > Fast TSC calibration using PIT > -Detected 2394.148 MHz processor. > -Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.29 BogoMIPS (lpj=2394148) > +Detected 2393.857 MHz processor. > +Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.71 BogoMIPS (lpj=2393857) > pid_max: default: 32768 minimum: 301 > Security Framework initialized > SELinux: Initializing. > @@ -168,12 +168,12 @@ CPU: Processor Core ID: 0 > mce: CPU supports 6 MCE banks > CPU0: Thermal monitoring enabled (TM2) > using mwait in idle threads. > -ACPI: Core revision 20120111 > -ftrace: allocating 21899 entries in 43 pages > +ACPI: Core revision 20120320 > +ftrace: allocating 22370 entries in 44 pages > Enabling APIC mode: Flat. Using 1 I/O APICs > ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > CPU0: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06 > -Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. > +Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. > ... version: 2 > ... bit width: 40 > ... generic registers: 2 > @@ -181,17 +181,16 @@ Performance Events: PEBS fmt0+, Core2 ev > ... max period: 000000007fffffff > ... fixed-purpose events: 3 > ... event mask: 0000000700000003 > -NMI watchdog enabled, takes one hw-pmu counter. > -CPU 1 irqstacks, hard=f30ce000 soft=f30d8000 > +NMI watchdog: enabled, takes one hw-pmu counter. > +CPU 1 irqstacks, hard=f30e0000 soft=f30e2000 > Booting Node 0, Processors #1 Ok. > -smpboot cpu 1: start_ip = 9b000 > Initializing CPU#1 > -NMI watchdog enabled, takes one hw-pmu counter. > +NMI watchdog: enabled, takes one hw-pmu counter. > Brought up 2 CPUs > -Total of 2 processors activated (9576.59 BogoMIPS). > +Total of 2 processors activated (9575.42 BogoMIPS). > devtmpfs: initialized > atomic64 test passed for i586+ platform with CX8 and with SSE > -RTC time: 12:29:27, date: 04/08/12 > +RTC time: 18:54:40, date: 07/01/12 > NET: Registered protocol family 16 > ACPI: bus type pci registered > PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) > @@ -222,7 +221,7 @@ ACPI: (supports S0 S3 S4 S5) > ACPI: Using IOAPIC for interrupt routing > ACPI: No dock devices found. > PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug > -(domain 0000 [bus 00-ff]) > +ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) > pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] > pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] > pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] > @@ -235,7 +234,7 @@ pci_root PNP0A03:00: host bridge window > pci_root PNP0A03:00: host bridge window [mem 0xfeda7000-0xfedfffff] > pci_root PNP0A03:00: host bridge window [mem 0xfee10000-0xff9fffff] > pci_root PNP0A03:00: host bridge window [mem 0xffc00000-0xffdfffff] > -pci_root PNP0A03:00: host bridge window [0x120000000-0x317ffffff] (ignored, not CPU addressable) > +pci_root PNP0A03:00: host bridge window [mem 0x120000000-0x317ffffff] > PCI host bridge to bus 0000:00 > pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] > pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] > @@ -249,48 +248,49 @@ pci_bus 0000:00: root bus resource [mem > pci_bus 0000:00: root bus resource [mem 0xfeda7000-0xfedfffff] > pci_bus 0000:00: root bus resource [mem 0xfee10000-0xff9fffff] > pci_bus 0000:00: root bus resource [mem 0xffc00000-0xffdfffff] > -type 0 class 0x000600 > -type 1 class 0x000604 > +pci_bus 0000:00: root bus resource [mem 0x120000000-0x317ffffff] > +pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000 > +pci 0000:00:01.0: [8086:2a01] type 01 class 0x060400 > pci 0000:00:01.0: PME# supported from D0 D3hot D3cold > -type 0 class 0x000c03 > +pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300 > pci 0000:00:1a.0: reg 20: [io 0x6f20-0x6f3f] > -type 0 class 0x000c03 > +pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300 > pci 0000:00:1a.1: reg 20: [io 0x6f00-0x6f1f] > -pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03 > +pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320 > pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff] > pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold > -pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403 > +pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300 > pci 0000:00:1b.0: reg 10: [mem 0xf6ffc000-0xf6ffffff 64bit] > pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > -pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604 > +pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400 > pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > -type 1 class 0x000604 > +pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400 > pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold > -type 1 class 0x000604 > +pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400 > pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold > -type 0 class 0x000c03 > +pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300 > pci 0000:00:1d.0: reg 20: [io 0x6f80-0x6f9f] > -type 0 class 0x000c03 > +pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300 > pci 0000:00:1d.1: reg 20: [io 0x6f60-0x6f7f] > -type 0 class 0x000c03 > +pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300 > pci 0000:00:1d.2: reg 20: [io 0x6f40-0x6f5f] > -type 0 class 0x000c03 > +pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320 > pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff] > pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold > -type 1 class 0x000604 > -type 0 class 0x000601 > +pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 > +pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100 > pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO > pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO > pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f) > pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 006c (mask 0007) > pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f) > -type 0 class 0x000101 > +pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a > pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7] > pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7] > pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177] > pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377] > pci 0000:00:1f.1: reg 20: [io 0x6fa0-0x6faf] > -type 0 class 0x000106 > +pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601 > pci 0000:00:1f.2: reg 10: [io 0x6eb0-0x6eb7] > pci 0000:00:1f.2: reg 14: [io 0x6eb8-0x6ebb] > pci 0000:00:1f.2: reg 18: [io 0x6ec0-0x6ec7] > @@ -298,10 +298,10 @@ pci 0000:00:1f.2: reg 1c: [io 0x6ec8-0x > pci 0000:00:1f.2: reg 20: [io 0x6ee0-0x6eff] > pci 0000:00:1f.2: reg 24: [mem 0xf6ffb800-0xf6ffbfff] > pci 0000:00:1f.2: PME# supported from D3hot > -pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05 > +pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500 > pci 0000:00:1f.3: reg 10: [mem 0xf6ffb700-0xf6ffb7ff] > pci 0000:00:1f.3: reg 20: [io 0x10c0-0x10df] > -type 0 class 0x000300 > +pci 0000:01:00.0: [10de:0407] type 00 class 0x030000 > pci 0000:01:00.0: reg 10: [mem 0xf5000000-0xf5ffffff] > pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref] > pci 0000:01:00.0: reg 1c: [mem 0xf2000000-0xf3ffffff 64bit] > @@ -311,7 +311,7 @@ pci 0000:00:01.0: PCI bridge to [bus 01- > pci 0000:00:01.0: bridge window [io 0xe000-0xefff] > pci 0000:00:01.0: bridge window [mem 0xf2000000-0xf6efffff] > pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] > -type 0 class 0x000200 > +pci 0000:09:00.0: [11ab:4354] type 00 class 0x020000 > pci 0000:09:00.0: reg 10: [mem 0xf1ffc000-0xf1ffffff 64bit] > pci 0000:09:00.0: reg 18: [io 0xde00-0xdeff] > pci 0000:09:00.0: supports D1 D2 > @@ -319,7 +319,7 @@ pci 0000:09:00.0: PME# supported from D0 > pci 0000:00:1c.0: PCI bridge to [bus 09-09] > pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] > pci 0000:00:1c.0: bridge window [mem 0xf1f00000-0xf1ffffff] > -type 0 class 0x000280 > +pci 0000:0b:00.0: [8086:4222] type 00 class 0x028000 > pci 0000:0b:00.0: reg 10: [mem 0xf1eff000-0xf1efffff] > pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold > pci 0000:0b:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' > @@ -329,27 +329,25 @@ pci 0000:00:1c.4: PCI bridge to [bus 0c- > pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] > pci 0000:00:1c.4: bridge window [mem 0xf1c00000-0xf1dfffff] > pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] > -type 0 class 0x000c00 > -pci 0000:03:09.0: proprietary Ricoh MMC controller disabled (via firewire function) > -pci 0000:03:09.0: MMC cards are now supported by standard SDHCI controller > +pci 0000:03:09.0: [1180:0832] type 00 class 0x0c0010 > pci 0000:03:09.0: reg 10: [mem 0xf1bff800-0xf1bfffff] > pci 0000:03:09.0: supports D1 D2 > pci 0000:03:09.0: PME# supported from D0 D1 D2 D3hot D3cold > -type 0 class 0x000805 > -pci 0000:03:09.1: reg 10: [mem 0xf1bff400-0xf1bff4ff] > +pci 0000:03:09.1: [1180:0822] type 00 class 0x080501 > +pci 0000:03:09.1: reg 10: [mem 0xf1bff500-0xf1bff5ff] > pci 0000:03:09.1: supports D1 D2 > pci 0000:03:09.1: PME# supported from D0 D1 D2 D3hot D3cold > -type 0 class 0x000880 > +pci 0000:03:09.2: [1180:0592] type 00 class 0x088000 > pci 0000:03:09.2: reg 10: [mem 0xf1bff600-0xf1bff6ff] > pci 0000:03:09.2: supports D1 D2 > pci 0000:03:09.2: PME# supported from D0 D1 D2 D3hot D3cold > -type 0 class 0x000880 > +pci 0000:03:09.3: [1180:0852] type 00 class 0x088000 > pci 0000:03:09.3: reg 10: [mem 0xf1bff700-0xf1bff7ff] > pci 0000:03:09.3: supports D1 D2 > pci 0000:03:09.3: PME# supported from D0 D1 D2 D3hot D3cold > -(subtractive decode) > +pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode) > pci 0000:00:1e.0: bridge window [mem 0xf1b00000-0xf1bfffff] > -(subtractive decode) > +pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) > pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) > pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) > pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) > @@ -361,6 +359,7 @@ pci 0000:00:1e.0: bridge window [mem 0 > pci 0000:00:1e.0: bridge window [mem 0xfeda7000-0xfedfffff] (subtractive decode) > pci 0000:00:1e.0: bridge window [mem 0xfee10000-0xff9fffff] (subtractive decode) > pci 0000:00:1e.0: bridge window [mem 0xffc00000-0xffdfffff] (subtractive decode) > +pci 0000:00:1e.0: bridge window [mem 0x120000000-0x317ffffff] (subtractive decode) > pci_bus 0000:00: on NUMA node 0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] > @@ -415,7 +414,7 @@ pnp 00:00: [mem 0xfed90000-0xfed9ffff wi > pnp 00:00: [mem 0xfeda7000-0xfedfffff window] > pnp 00:00: [mem 0xfee10000-0xff9fffff window] > pnp 00:00: [mem 0xffc00000-0xffdfffff window] > -pnp 00:00: [mem 0x20000000-0x17ffffff window] > +pnp 00:00: [mem 0x120000000-0x317ffffff window] > pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) > pnp 00:01: [io 0x004e-0x004f] > pnp 00:01: [io 0x0068-0x006f] > @@ -468,10 +467,10 @@ pnp 00:0a: [irq 0 disabled] > pnp 00:0a: [io 0x04d0-0x04d1] > pnp 00:0a: [io 0x1000-0x1005] > pnp 00:0a: [io 0x1008-0x100f] > -because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] > +pnp 00:0a: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] > pnp 00:0a: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] > system 00:0a: [io 0x0900-0x097f] has been reserved > -has been reserved > +system 00:0a: [io 0x04d0-0x04d1] has been reserved > system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) > pnp 00:0b: [io 0xf400-0xf4fe] > pnp 00:0b: [io 0x0086] > @@ -481,13 +480,13 @@ pnp 00:0b: [io 0x1080-0x10bf] > pnp 00:0b: [io 0x10c0-0x10df] > pnp 00:0b: [io 0x1010-0x102f] > pnp 00:0b: [io 0x0809] > -because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] > -because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] > +pnp 00:0b: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] > +pnp 00:0b: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] > pnp 00:0b: disabling [io 0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] > system 00:0b: [io 0xf400-0xf4fe] has been reserved > system 00:0b: [io 0x1080-0x10bf] has been reserved > system 00:0b: [io 0x10c0-0x10df] has been reserved > -has been reserved > +system 00:0b: [io 0x0809] has been reserved > system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) > pnp 00:0c: [mem 0x00000000-0x0009efff] > pnp 00:0c: [mem 0x0009f000-0x0009ffff] > @@ -528,10 +527,15 @@ system 00:0c: [mem 0xf8000000-0xfbffffff > system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) > pnp: PnP ACPI: found 13 devices > ACPI: ACPI bus type pnp unregistered > -PCI: max bus depth: 1 pci_try_num: 2 > -pci 0000:00:1c.1: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref] > +pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09-09] add_size 200000 > +pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 0b-0b] add_size 1000 > +pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b-0b] add_size 200000 > +pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 > +pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 > +pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 > +pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref] > +pci 0000:00:1c.1: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref] > pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff] > -pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref] > pci 0000:01:00.0: BAR 6: assigned [mem 0xf4000000-0xf401ffff pref] > pci 0000:00:01.0: PCI bridge to [bus 01-01] > pci 0000:00:01.0: bridge window [io 0xe000-0xefff] > @@ -540,11 +544,11 @@ pci 0000:00:01.0: bridge window [mem 0 > pci 0000:00:1c.0: PCI bridge to [bus 09-09] > pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] > pci 0000:00:1c.0: bridge window [mem 0xf1f00000-0xf1ffffff] > -pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf05fffff 64bit pref] > +pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf03fffff 64bit pref] > pci 0000:00:1c.1: PCI bridge to [bus 0b-0b] > pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] > pci 0000:00:1c.1: bridge window [mem 0xf1e00000-0xf1efffff] > -pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf03fffff 64bit pref] > +pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf05fffff 64bit pref] > pci 0000:00:1c.4: PCI bridge to [bus 0c-0d] > pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] > pci 0000:00:1c.4: bridge window [mem 0xf1c00000-0xf1dfffff] > @@ -564,15 +568,16 @@ pci_bus 0000:00: resource 12 [mem 0xfed9 > pci_bus 0000:00: resource 13 [mem 0xfeda7000-0xfedfffff] > pci_bus 0000:00: resource 14 [mem 0xfee10000-0xff9fffff] > pci_bus 0000:00: resource 15 [mem 0xffc00000-0xffdfffff] > +pci_bus 0000:00: resource 16 [mem 0x120000000-0x317ffffff] > pci_bus 0000:01: resource 0 [io 0xe000-0xefff] > pci_bus 0000:01: resource 1 [mem 0xf2000000-0xf6efffff] > pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] > pci_bus 0000:09: resource 0 [io 0xd000-0xdfff] > pci_bus 0000:09: resource 1 [mem 0xf1f00000-0xf1ffffff] > -pci_bus 0000:09: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref] > +pci_bus 0000:09: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref] > pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff] > pci_bus 0000:0b: resource 1 [mem 0xf1e00000-0xf1efffff] > -pci_bus 0000:0b: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref] > +pci_bus 0000:0b: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref] > pci_bus 0000:0c: resource 0 [io 0xc000-0xcfff] > pci_bus 0000:0c: resource 1 [mem 0xf1c00000-0xf1dfffff] > pci_bus 0000:0c: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref] > @@ -589,29 +594,29 @@ pci_bus 0000:03: resource 12 [mem 0xfed9 > pci_bus 0000:03: resource 13 [mem 0xfeda7000-0xfedfffff] > pci_bus 0000:03: resource 14 [mem 0xfee10000-0xff9fffff] > pci_bus 0000:03: resource 15 [mem 0xffc00000-0xffdfffff] > +pci_bus 0000:03: resource 16 [mem 0x120000000-0x317ffffff] > NET: Registered protocol family 2 > IP route cache hash table entries: 32768 (order: 5, 131072 bytes) > TCP established hash table entries: 131072 (order: 8, 1048576 bytes) > TCP bind hash table entries: 65536 (order: 7, 524288 bytes) > TCP: Hash tables configured (established 131072 bind 65536) > -TCP reno registered > +TCP: reno registered > UDP hash table entries: 512 (order: 2, 16384 bytes) > UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) > NET: Registered protocol family 1 > pci 0000:01:00.0: Boot video device > PCI: CLS 64 bytes, default 64 > Unpacking initramfs... > -Freeing initrd memory: 16680k freed > +Freeing initrd memory: 15656k freed > Simple Boot Flag at 0x79 set to 0x1 > apm: BIOS not found. > -Intel AES-NI instructions are not detected. > audit: initializing netlink socket (disabled) > -type=2000 audit(1333888166.549:1): initialized > +type=2000 audit(1341168880.516:1): initialized > highmem bounce pool size: 64 pages > -HugeTLB registered 4 MB page size, pre-allocated 0 pages > +HugeTLB registered 2 MB page size, pre-allocated 0 pages > VFS: Disk quotas dquot_6.5.2 > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > -msgmni has been set to 1676 > +msgmni has been set to 1660 > SELinux: Registering netfilter hooks > alg: No test for stdrng (krng) > NET: Registered protocol family 38 > @@ -626,14 +631,13 @@ pcieport 0000:00:1c.4: irq 43 for MSI/MS > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > pciehp: PCI Express Hot Plug Controller Driver version: 0.4 > acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 > -registered > -vesafb: mode is 1024x768x32, linelength=4096, pages=0 > +acpiphp: Slot [1] registered > +vesafb: mode is 1440x900x32, linelength=5760, pages=0 > vesafb: scrolling: redraw > vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 > -vesafb: framebuffer at 0xf3000000, mapped to 0xf7c80000, using 3072k, total 3072k > -Console: switching to colour frame buffer device 128x48 > +vesafb: framebuffer at 0xf3000000, mapped to 0xf7e80000, using 5120k, total 5120k > +Console: switching to colour frame buffer device 180x56 > fb0: VESA VGA frame buffer device > -intel_idle: MWAIT substates: 0x3122220 > intel_idle: does not run on family 6 model 23 > ACPI: AC Adapter [AC] (off-line) > input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 > @@ -642,17 +646,15 @@ input: Power Button as /devices/LNXSYSTM > ACPI: Power Button [PBTN] > input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 > ACPI: Sleep Button [SBTN] > +ACPI: Requesting acpi_cpufreq > Monitor-Mwait will be used to enter C-1 state > Monitor-Mwait will be used to enter C-2 state > Monitor-Mwait will be used to enter C-3 state > Marking TSC unstable due to TSC halts in idle > ACPI: acpi_idle registered with cpuidle > thermal LNXTHERM:00: registered as thermal_zone0 > -ACPI: Thermal Zone [THM] (32 C) > +ACPI: Thermal Zone [THM] (53 C) > GHES: HEST is not enabled! > -isapnp: Scanning for PnP cards... > -(battery present) > -isapnp: No Plug & Play device found > Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > Non-volatile memory driver v1.3 > Linux agpgart interface v0.103 > @@ -662,6 +664,7 @@ ahci 0000:00:1f.2: irq 44 for MSI/MSI-X > ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode > ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems > ahci 0000:00:1f.2: setting latency timer to 64 > +ACPI: Battery Slot [BAT0] (battery present) > scsi0 : ahci > scsi1 : ahci > scsi2 : ahci > @@ -687,7 +690,7 @@ ehci_hcd 0000:00:1a.7: USB 2.0 started, > usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb1: Product: EHCI Host Controller > -usb usb1: Manufacturer: Linux 3.3.0-4.fc16.i686 ehci_hcd > +usb usb1: Manufacturer: Linux 3.4.3-1.fc17.i686.PAE ehci_hcd > usb usb1: SerialNumber: 0000:00:1a.7 > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 4 ports detected > @@ -701,7 +704,7 @@ ehci_hcd 0000:00:1d.7: USB 2.0 started, > usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 > usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb2: Product: EHCI Host Controller > -usb usb2: Manufacturer: Linux 3.3.0-4.fc16.i686 ehci_hcd > +usb usb2: Manufacturer: Linux 3.4.3-1.fc17.i686.PAE ehci_hcd > usb usb2: SerialNumber: 0000:00:1d.7 > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 6 ports detected > @@ -714,7 +717,7 @@ uhci_hcd 0000:00:1a.0: irq 20, io base 0 > usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb3: Product: UHCI Host Controller > -usb usb3: Manufacturer: Linux 3.3.0-4.fc16.i686 uhci_hcd > +usb usb3: Manufacturer: Linux 3.4.3-1.fc17.i686.PAE uhci_hcd > usb usb3: SerialNumber: 0000:00:1a.0 > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > @@ -725,7 +728,7 @@ uhci_hcd 0000:00:1a.1: irq 21, io base 0 > usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb4: Product: UHCI Host Controller > -usb usb4: Manufacturer: Linux 3.3.0-4.fc16.i686 uhci_hcd > +usb usb4: Manufacturer: Linux 3.4.3-1.fc17.i686.PAE uhci_hcd > usb usb4: SerialNumber: 0000:00:1a.1 > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 2 ports detected > @@ -736,7 +739,7 @@ uhci_hcd 0000:00:1d.0: irq 20, io base 0 > usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb5: Product: UHCI Host Controller > -usb usb5: Manufacturer: Linux 3.3.0-4.fc16.i686 uhci_hcd > +usb usb5: Manufacturer: Linux 3.4.3-1.fc17.i686.PAE uhci_hcd > usb usb5: SerialNumber: 0000:00:1d.0 > hub 5-0:1.0: USB hub found > hub 5-0:1.0: 2 ports detected > @@ -747,7 +750,7 @@ uhci_hcd 0000:00:1d.1: irq 21, io base 0 > usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb6: Product: UHCI Host Controller > -usb usb6: Manufacturer: Linux 3.3.0-4.fc16.i686 uhci_hcd > +usb usb6: Manufacturer: Linux 3.4.3-1.fc17.i686.PAE uhci_hcd > usb usb6: SerialNumber: 0000:00:1d.1 > hub 6-0:1.0: USB hub found > hub 6-0:1.0: 2 ports detected > @@ -758,13 +761,13 @@ uhci_hcd 0000:00:1d.2: irq 22, io base 0 > usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb7: Product: UHCI Host Controller > -usb usb7: Manufacturer: Linux 3.3.0-4.fc16.i686 uhci_hcd > +usb usb7: Manufacturer: Linux 3.4.3-1.fc17.i686.PAE uhci_hcd > usb usb7: SerialNumber: 0000:00:1d.2 > hub 7-0:1.0: USB hub found > hub 7-0:1.0: 2 ports detected > usbcore: registered new interface driver usbserial > -USB Serial support registered for generic > usbcore: registered new interface driver usbserial_generic > +USB Serial support registered for generic > usbserial: USB Serial Driver core > i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > @@ -781,7 +784,7 @@ EFI Variables Facility v0.08 2004-May-17 > usbcore: registered new interface driver usbhid > usbhid: USB HID core driver > ip_tables: (C) 2000-2006 Netfilter Core Team > -TCP cubic registered > +TCP: cubic registered > Initializing XFRM netlink socket > NET: Registered protocol family 10 > Mobile IPv6 > @@ -790,56 +793,56 @@ Registering the dns_resolver key type > Using IPI No-Shortcut mode > PM: Hibernation image not present or could not be loaded. > registered taskstats version 1 > - Magic number: 8:784:480 > -rtc_cmos 00:04: setting system clock to 2012-04-08 12:29:28 UTC (1333888168) > + Magic number: 4:879:947 > +tty tty4: hash matches > +rtc_cmos 00:04: setting system clock to 2012-07-01 18:54:41 UTC (1341168881) > Initializing network drop monitor service > input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 > ata4.00: ATAPI: Optiarc DVD+/-RW AD-7640A, JD05, max UDMA/33 > ata4.00: configured for UDMA/33 > ata3: SATA link down (SStatus 0 SControl 300) > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > -ata1.00: ATA-7: ST9200420ASG, 3.ADD, max UDMA/133 > -ata1.00: 390721968 sectors, multi 8: LBA48 NCQ (depth 31/32) > +ata1.00: ATA-9: OCZ-VERTEX4, 1.3, max UDMA/133 > +ata1.00: 500118192 sectors, multi 8: LBA48 NCQ (depth 31/32), AA > ata1.00: configured for UDMA/133 > -scsi 0:0:0:0: Direct-Access ATA ST9200420ASG 3.AD PQ: 0 ANSI: 5 > +scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX4 1.3 PQ: 0 ANSI: 5 > +sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) > sd 0:0:0:0: Attached scsi generic sg0 type 0 > -sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA > scsi 3:0:0:0: CD-ROM Optiarc DVD+-RW AD-7640A JD05 PQ: 0 ANSI: 5 > + sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 > > usb 1-1: new high-speed USB device number 2 using ehci_hcd > +sd 0:0:0:0: [sda] Attached SCSI disk > sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy > cdrom: Uniform CD-ROM driver Revision: 3.20 > sr 3:0:0:0: Attached scsi CD-ROM sr0 > sr 3:0:0:0: Attached scsi generic sg1 type 5 > - sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 > > -sd 0:0:0:0: [sda] Attached SCSI disk > -Freeing unused kernel memory: 620k freed > -Write protecting the kernel text: 5340k > -Write protecting the kernel read-only data: 2096k > +Freeing unused kernel memory: 640k freed > +Write protecting the kernel text: 5444k > +Write protecting the kernel read-only data: 2140k > +NX-protecting the kernel data: 4796k > +dracut: dracut-018-40.git20120522.fc17 > usb 1-1: New USB device found, idVendor=05a9, idProduct=2640 > usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > usb 1-1: Product: Laptop Integrated Webcam > usb 1-1: Manufacturer: OmniVision Technologies, Inc. -2640-07.07.20.3 > -dracut: dracut-013-20.fc16 > dracut: rd.luks=0: removing cryptoluks activation > -dracut: rd.lvm=0: removing LVM activation > -udevd[111]: starting version 173 > -wmi: Mapper loaded > +udevd[111]: starting version 182 > +[drm] Initialized drm 1.1.0 20060810 > acpi device:31: registered as cooling_device2 > input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2e/LNXVIDEO:00/input/input4 > ACPI: Video Device [VID] (multi-head: yes rom: no post: no) > -[drm] Initialized drm 1.1.0 20060810 > -VGA switcheroo: detected Optimus DSM method \ handle > +wmi: Mapper loaded > [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x084700a2) > -checking generic (f3000000 300000) vs hw (e0000000 10000000) > -checking generic (f3000000 300000) vs hw (f2000000 2000000) > +checking generic (f3000000 500000) vs hw (e0000000 10000000) > +checking generic (f3000000 500000) vs hw (f2000000 2000000) > fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver > Console: switching to colour dummy device 80x25 > -[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN > -usb 2-2: new high-speed USB device number 3 using ehci_hcd > +[drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS > [drm] nouveau 0000:01:00.0: ... appears to be valid > +[drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN > [drm] nouveau 0000:01:00.0: BIT BIOS found > [drm] nouveau 0000:01:00.0: Bios version 60.84.5e.00 > [drm] nouveau 0000:01:00.0: TMDS table version 2.0 > @@ -859,27 +862,14 @@ usb 2-2: new high-speed USB device numbe > [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xCB78 > [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xD5C8 > [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD6BA > -usb 2-2: New USB device found, idVendor=0bb4, idProduct=0c99 > -usb 2-2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > -usb 2-2: Product: Android Phone > [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD8ED > [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xD952 > -usb 2-2: Manufacturer: HTC > -usb 2-2: SerialNumber: HT999L903452 > [drm] nouveau 0000:01:00.0: 0xD952: Condition still not met after 20ms, skipping following opcodes > -Initializing USB Mass Storage driver... > -scsi5 : usb-storage 2-2:1.0 > -[drm] nouveau 0000:01:00.0: 3 available performance level(s) > -[drm] nouveau 0000:01:00.0: 0: core 169MHz shader 338MHz memory 100MHz timing 0 voltage 1150mV fanspeed 100% > -[drm] nouveau 0000:01:00.0: 1: core 275MHz shader 550MHz memory 301MHz timing 1 voltage 1150mV fanspeed 100% > -[drm] nouveau 0000:01:00.0: 2: core 475MHz shader 950MHz memory 702MHz timing 2 voltage 1200mV fanspeed 100% > -[drm] nouveau 0000:01:00.0: c: core 275MHz shader 550MHz memory 302MHz voltage 1150mV > -usbcore: registered new interface driver usb-storage > -USB Mass Storage support registered. > -[TTM] Zone kernel: Available graphics memory: 429556 kiB. > -[TTM] Zone highmem: Available graphics memory: 1811164 kiB. > -[TTM] Initializing pool allocator. > -[drm] nouveau 0000:01:00.0: Detected 256MiB VRAM > +[TTM] Zone kernel: Available graphics memory: 425282 kiB > +[TTM] Zone highmem: Available graphics memory: 2068010 kiB > +[TTM] Initializing pool allocator > +[TTM] Initializing DMA pool allocator > +[drm] nouveau 0000:01:00.0: Detected 256MiB VRAM (GDDR3) > mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining > [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) > [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown > @@ -887,6 +877,11 @@ mtrr: type mismatch for e0000000,1000000 > [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). > [drm] No driver support for vblank timestamp query. > [drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering our own > +[drm] nouveau 0000:01:00.0: 3 available performance level(s) > +[drm] nouveau 0000:01:00.0: 0: core 169MHz shader 338MHz memory 100MHz voltage 1150mV fanspeed 100% > +[drm] nouveau 0000:01:00.0: 1: core 275MHz shader 550MHz memory 301MHz voltage 1150mV fanspeed 100% > +[drm] nouveau 0000:01:00.0: 2: core 475MHz shader 950MHz memory 702MHz voltage 1200mV fanspeed 100% > +[drm] nouveau 0000:01:00.0: c: core 275MHz shader 550MHz memory 302MHz voltage 1150mV > input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input5 > input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input6 > usb 3-2: new full-speed USB device number 2 using uhci_hcd > @@ -903,66 +898,58 @@ input: A4Tech USB Full Speed as /devices > generic-usb 0003:09DA:8090.0001: input,hidraw0: USB HID v1.11 Mouse [A4Tech USB Full Speed] on usb-0000:00:1d.0-1/input0 > input: A4Tech USB Full Speed as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.1/input/input8 > generic-usb 0003:09DA:8090.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [A4Tech USB Full Speed] on usb-0000:00:1d.0-1/input1 > -scsi 5:0:0:0: Direct-Access HTC Android Phone 0100 PQ: 0 ANSI: 2 > -sd 5:0:0:0: Attached scsi generic sg2 type 0 > -sd 5:0:0:0: [sdb] Attached SCSI removable disk > -usb 6-1: new full-speed USB device number 2 using uhci_hcd > -usb 6-1: New USB device found, idVendor=054c, idProduct=03d5 > -usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > -usb 6-1: Product: Motion Controller > -usb 6-1: Manufacturer: Sony Computer Entertainment > -input: Sony Computer Entertainment Motion Controller as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input9 > -generic-usb 0003:054C:03D5.0003: input,hiddev0,hidraw2: USB HID v1.10 Gamepad [Sony Computer Entertainment Motion Controller] on usb-0000:00:1d.1-1/input0 > -composite sync not supported > -[drm] nouveau 0000:01:00.0: allocated 1440x900 fb: 0x320000, bo f28cf600 > -fbcon: nouveaufb (fb0) is primary device > -Console: switching to colour frame buffer device 180x56 > -fb0: nouveaufb frame buffer device > -drm: registered panic notifier > -[drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0 > -dracut: Starting plymouth daemon > usb 7-2: new full-speed USB device number 2 using uhci_hcd > -composite sync not supported > -dracut: rd.dm=0: removing DM RAID activation > usb 7-2: New USB device found, idVendor=0a5c, idProduct=4500 > usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > usb 7-2: Product: BCM2045B2 > usb 7-2: Manufacturer: Broadcom > -dracut: rd.md=0: removing MD RAID activation > hub 7-2:1.0: USB hub found > hub 7-2:1.0: 3 ports detected > -sdhci: Secure Digital Host Controller Interface driver > -sdhci: Copyright(c) Pierre Ossman > -(rev 22) > -Registered led device: mmc0:: > -using DMA > -firewire_ohci: Added fw-ohci device 0000:03:09.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x11 > +composite sync not supported > usb 7-2.2: new full-speed USB device number 3 using uhci_hcd > +[drm] nouveau 0000:01:00.0: allocated 1440x900 fb: 0x320000, bo f6c97e00 > +fbcon: nouveaufb (fb0) is primary device > +Console: switching to colour frame buffer device 180x56 > +fb0: nouveaufb frame buffer device > +drm: registered panic notifier > +[drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0 > +dracut: Starting plymouth daemon > usb 7-2.2: New USB device found, idVendor=0a5c, idProduct=4502 > usb 7-2.2: New USB device strings: Mfr=1, Product=0, SerialNumber=0 > usb 7-2.2: Manufacturer: Broadcom Corp > -input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.2/7-2.2:1.0/input/input10 > -generic-usb 0003:0A5C:4502.0004: input,hidraw3: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1d.2-2.2/input0 > +input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.2/7-2.2:1.0/input/input9 > +generic-usb 0003:0A5C:4502.0003: input,hidraw2: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1d.2-2.2/input0 > +composite sync not supported > usb 7-2.3: new full-speed USB device number 4 using uhci_hcd > -firewire_core: created device fw0: GUID 334fc0001cece070, S400 > usb 7-2.3: New USB device found, idVendor=0a5c, idProduct=4503 > usb 7-2.3: New USB device strings: Mfr=1, Product=0, SerialNumber=0 > usb 7-2.3: Manufacturer: Broadcom Corp > -input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.3/7-2.3:1.0/input/input11 > -generic-usb 0003:0A5C:4503.0005: input,hidraw4: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1d.2-2.3/input0 > -EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) > -dracut: Checking ext4: /dev/disk/by-uuid/7417d839-a647-466e-b57d-fc65d20a6342 > -dracut: issuing e2fsck -a /dev/disk/by-uuid/7417d839-a647-466e-b57d-fc65d20a6342 > -dracut: _Fedora-16-i686-: clean, 238747/901120 files, 1776110/3584000 blocks > -dracut: Remounting /dev/disk/by-uuid/7417d839-a647-466e-b57d-fc65d20a6342 with -o ro > -EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) > -dracut: Mounted root filesystem /dev/sda7 > +input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.3/7-2.3:1.0/input/input10 > +generic-usb 0003:0A5C:4503.0004: input,hidraw3: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1d.2-2.3/input0 > +dracut: rd.dm=0: removing DM RAID activation > +dracut: rd.md=0: removing MD RAID activation > +sdhci: Secure Digital Host Controller Interface driver > +sdhci: Copyright(c) Pierre Ossman > +firewire_ohci 0000:03:09.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11 > +sdhci-pci 0000:03:09.1: SDHCI controller found [1180:0822] (rev 22) > +Registered led device: mmc0:: > +mmc0: SDHCI controller on PCI [0000:03:09.1] using DMA > +EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) > +dracut: Checking ext4: /dev/disk/by-uuid/29c27e52-ab08-4c1a-9ed7-86ab260b207b > +dracut: issuing e2fsck -a /dev/disk/by-uuid/29c27e52-ab08-4c1a-9ed7-86ab260b207b > +dracut: /dev/disk/by-uuid/29c27e52-ab08-4c1a-9ed7-86ab260b207b: clean, 275331/983040 files, 2231118/3932160 blocks > +dracut: Remounting /dev/disk/by-uuid/29c27e52-ab08-4c1a-9ed7-86ab260b207b with -o ro > +EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) > +dracut: Mounted root filesystem /dev/sda6 > dracut: Switching root > -type=1404 audit(1333888173.684:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 > -SELinux: 2048 avtab hash slots, 97362 rules. > -SELinux: 2048 avtab hash slots, 97362 rules. > -SELinux: 9 users, 13 roles, 3912 types, 215 bools, 1 sens, 1024 cats > -SELinux: 82 classes, 97362 rules > +type=1404 audit(1341168884.696:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 > +firewire_core 0000:03:09.0: created device fw0: GUID 334fc0001cece070, S400 > +SELinux: 2048 avtab hash slots, 100708 rules. > +SELinux: 2048 avtab hash slots, 100708 rules. > +SELinux: 9 users, 15 roles, 4148 types, 223 bools, 1 sens, 1024 cats > +SELinux: 83 classes, 100708 rules > +SELinux: Permission ptrace_child in class process not defined in policy. > +SELinux: the above unknown classes and permissions will be allowed > SELinux: Completing initialization. > SELinux: Setting up existing superblocks. > SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts > @@ -979,18 +966,17 @@ SELinux: initialized (dev devpts, type d > SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs > SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs > SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts > -SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts > SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts > SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs > SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs > -SELinux: initialized (dev sda7, type ext4), uses xattr > -type=1403 audit(1333888173.953:3): policy loaded auid=4294967295 ses=4294967295 > -systemd[1]: Successfully loaded SELinux policy in 347ms 981us. > -systemd[1]: Successfully loaded SELinux database in 54ms 927us, size on heap is 365K. > +SELinux: initialized (dev sda6, type ext4), uses xattr > +SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts > +type=1403 audit(1341168885.034:3): policy loaded auid=4294967295 ses=4294967295 > +systemd[1]: Successfully loaded SELinux policy in 354ms 350us. > systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time. > SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs > SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts > -systemd[1]: Relabelled /dev and /run in 42ms 476us. > +systemd[1]: Relabelled /dev and /run in 44ms 145us. > SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts > SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts > SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts > @@ -999,62 +985,51 @@ SELinux: initialized (dev cgroup, type c > SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts > SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts > SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts > -systemd[1]: systemd 37 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; fedora) > +systemd[1]: systemd 44 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP; fedora) > systemd[1]: Set hostname to <xps>. > SELinux: initialized (dev autofs, type autofs), uses genfs_contexts > -udevd[521]: starting version 173 > -udevd[521]: specified group 'plugdev' unknown > -SELinux: initialized (dev configfs, type configfs), uses genfs_contexts > SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs > -SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs > -SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts > -EXT4-fs (sda7): re-mounted. Opts: (null) > -RPC: Registered named UNIX socket transport module. > -RPC: Registered udp transport module. > -RPC: Registered tcp transport module. > -RPC: Registered tcp NFSv4.1 backchannel transport module. > -SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts > -SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts > +systemd-journald[309]: Fixed max_use=201.9M max_size=25.2M min_size=64.0K keep_free=100.9M > +systemd-journald[309]: Vacuuming... > +udevd[307]: starting version 182 > +EXT4-fs (sda6): re-mounted. Opts: (null) > sky2: driver version 1.30 > sky2 0000:09:00.0: Yukon-2 FE+ chip revision 0 > sky2 0000:09:00.0: irq 45 for MSI/MSI-X > sky2 0000:09:00.0: eth0: addr 00:21:9b:cd:55:50 > cfg80211: Calling CRDA to update world regulatory domain > -iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:ds > -iwl3945: Copyright(c) 2003-2011 Intel Corporation > -iwl3945 0000:0b:00.0: enabling device (0000 -> 0002) > -iwl3945 0000:0b:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF > iTCO_vendor_support: vendor-support=0 > -iwl3945 0000:0b:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF > -iwl3945 0000:0b:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF > -iwl3945 0000:0b:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF > -iwl3945 0000:0b:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF > -iwl3945 0000:0b:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF > -iwl3945 0000:0b:00.0: bad EEPROM signature,EEPROM_GP=0x00000007 > -iwl3945 0000:0b:00.0: EEPROM not found, EEPROM_GP=0xffffffff > -iwl3945 0000:0b:00.0: Unable to init EEPROM > iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 > iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) > iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) > -iwl3945: probe of 0000:0b:00.0 failed with error -2 > -microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c > +Linux media interface: v0.10 > +Linux video capture interface: v2.00 > +snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X > r592: driver successfully loaded > -mtp-probe[674]: checking bus 6, device 2: "/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1" > -mtp-probe[724]: checking bus 7, device 3: "/sys/devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.2" > -mtp-probe[670]: checking bus 5, device 2: "/sys/devices/pci0000:00/0000:00:1d.0/usb5/5-1" > -mtp-probe[691]: checking bus 2, device 3: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-2" > -mtp-probe[684]: checking bus 1, device 2: "/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-1" > -mtp-probe[650]: checking bus 3, device 2: "/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-2" > -mtp-probe[730]: checking bus 7, device 4: "/sys/devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.3" > -mtp-probe[691]: bus: 2, device: 3 was not an MTP device > -mtp-probe[724]: bus: 7, device: 3 was not an MTP device > -mtp-probe[670]: bus: 5, device: 2 was not an MTP device > -mtp-probe[684]: bus: 1, device: 2 was not an MTP device > -mtp-probe[674]: bus: 6, device: 2 was not an MTP device > -mtp-probe[730]: bus: 7, device: 4 was not an MTP device > -mtp-probe[650]: bus: 3, device: 2 was not an MTP device > +uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640) > +input: Laptop Integrated Webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input11 > +usbcore: registered new interface driver uvcvideo > +USB Video Class driver (1.1.1) > +ALSA sound/pci/hda/hda_codec.c:5099 autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker > +ALSA sound/pci/hda/hda_codec.c:5103 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) > +ALSA sound/pci/hda/hda_codec.c:5107 hp_outs=2 (0xa/0xf/0x0/0x0/0x0) > +ALSA sound/pci/hda/hda_codec.c:5108 mono: mono_out=0x0 > +ALSA sound/pci/hda/hda_codec.c:5111 dig-out=0x21/0x0 > +ALSA sound/pci/hda/hda_codec.c:5112 inputs: > +ALSA sound/pci/hda/hda_codec.c:5116 Internal Mic=0xc > +ALSA sound/pci/hda/hda_codec.c:5116 Mic=0xe > +ALSA sound/pci/hda/hda_codec.c:5118 > +ALSA sound/pci/hda/patch_sigmatel.c:3111 stac92xx: dac_nids=2 (0x2/0x5/0x0/0x0/0x0) > +iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:ds > +iwl3945: Copyright(c) 2003-2011 Intel Corporation > +microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c > +iwl3945 0000:0b:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels > +iwl3945 0000:0b:00.0: Detected Intel Wireless WiFi Link 3945ABG > +iwl3945 0000:0b:00.0: irq 47 for MSI/MSI-X > +Registered led device: phy0-led > +ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs' > dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) > -r852: driver loaded successfully > +input: Dell WMI hotkeys as /devices/virtual/input/input12 > cfg80211: World regulatory domain updated: > cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) > cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) > @@ -1062,103 +1037,54 @@ cfg80211: (2457000 KHz - 2482000 KHz @ > cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) > cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) > cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) > +Adding 4930552k swap on /dev/sda8. Priority:0 extents:1 across:4930552k SS > microcode: CPU0 updated to revision 0x60f, date = 2010-09-29 > microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c > +fuse init (API version 7.18) > +udevd[326]: renamed network interface eth0 to p2p1 > microcode: CPU1 updated to revision 0x60f, date = 2010-09-29 > microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba > -Linux media interface: v0.10 > -Linux video capture interface: v2.00 > -input: Dell WMI hotkeys as /devices/virtual/input/input12 > -snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X > -uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640) > -uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. > -input: Laptop Integrated Webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input13 > -usbcore: registered new interface driver uvcvideo > -USB Video Class driver (1.1.1) > -ALSA sound/pci/hda/hda_codec.c:4927 autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker > -ALSA sound/pci/hda/hda_codec.c:4931 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) > -ALSA sound/pci/hda/hda_codec.c:4935 hp_outs=2 (0xa/0xf/0x0/0x0/0x0) > -ALSA sound/pci/hda/hda_codec.c:4936 mono: mono_out=0x0 > -ALSA sound/pci/hda/hda_codec.c:4939 dig-out=0x21/0x0 > -ALSA sound/pci/hda/hda_codec.c:4940 inputs: > -ALSA sound/pci/hda/hda_codec.c:4944 Internal Mic=0xc > -ALSA sound/pci/hda/hda_codec.c:4944 Mic=0xe > -ALSA sound/pci/hda/hda_codec.c:4946 > -ALSA sound/pci/hda/patch_sigmatel.c:3090 stac92xx: dac_nids=2 (0x2/0x5/0x0/0x0/0x0) > -udevd[609]: renamed network interface eth0 to p2p1 > -fuse init (API version 7.18) > SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts > -mount[900]: mount: fusectl already mounted or /sys/fs/fuse/connections busy > -mount[900]: mount: according to mtab, fusectl is already mounted on /sys/fs/fuse/connections > -systemd[1]: sys-fs-fuse-connections.mount mount process exited, code=exited status=32 > -Adding 2047996k swap on /dev/sda8. Priority:0 extents:1 across:2047996k > -systemd-fsck[893]: /dev/sda5: clean, 281/76304 files, 117477/304216 blocks > -SELinux: initialized (dev sda3, type fuseblk), uses genfs_contexts > -ntfs-3g[923]: Version 2011.4.12 integrated FUSE 27 > -ntfs-3g[923]: Mounted /dev/sda3 (Read-Write, label "", NTFS 3.1) > -ntfs-3g[923]: Cmdline options: rw > -ntfs-3g[923]: Mount options: rw,allow_other,nonempty,atime,fsname=/dev/sda3,blkdev,blksize=4096 > -ntfs-3g[923]: Ownership and permissions disabled, configuration type 1 > -fedora-storage-init[912]: Setting up Logical Volume Management: No volume groups found > -fedora-storage-init[912]: [ OK ] > +cfg80211: Calling CRDA for country: GB > +cfg80211: Regulatory domain changed to country: GB > +cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) > +cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) > +cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) > +cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) > +cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) > +SELinux: initialized (dev sda2, type fuseblk), uses genfs_contexts > EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) > SELinux: initialized (dev sda5, type ext4), uses xattr > -fedora-storage-init[925]: Setting up Logical Volume Management: No volume groups found > -fedora-storage-init[925]: [ OK ] > -systemd-fsck[903]: /home: clean, 1056585/5799936 files, 19080578/23175424 blocks > -lvm[935]: No volume groups found > -EXT4-fs (sda6): mounting ext3 file system using the ext4 subsystem > -EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) > -SELinux: initialized (dev sda6, type ext3), uses xattr > -EXT4-fs (sda9): warning: maximal mount count reached, running e2fsck is recommended > -EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null) > -SELinux: initialized (dev sda9, type ext4), uses xattr > -systemd-tmpfiles[951]: Successfully loaded SELinux database in 13ms 399us, size on heap is 366K. > +EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) > +SELinux: initialized (dev sda7, type ext4), uses xattr > nf_conntrack version 0.5.0 (16384 buckets, 65536 max) > -auditd[965]: Started dispatcher: /sbin/audispd pid: 990 > -iptables.init[959]: iptables: Applying firewall rules: [ OK ] > -audispd[990]: priority_boost_parser called with: 4 > -audispd[990]: max_restarts_parser called with: 10 > -audispd[990]: audispd initialized with q_depth=120 and 1 active plugins > -ip6_tables: (C) 2000-2006 Netfilter Core Team > -ip6tables.init[960]: ip6tables: Applying firewall rules: [ OK ] > -NetworkManager[1003]: <info> NetworkManager (version 0.9.2-1.fc16) is starting... > -NetworkManager[1003]: <info> Read config file /etc/NetworkManager/NetworkManager.conf > -NetworkManager[1003]: NetworkManager[1003]: <info> NetworkManager (version 0.9.2-1.fc16) is starting... > -NetworkManager[1003]: NetworkManager[1003]: <info> Read config file /etc/NetworkManager/NetworkManager.conf > -mcelog[996]: mcelog read: No such device > -auditctl[973]: No rules > -auditctl[973]: AUDIT_STATUS: enabled=0 flag=1 pid=965 rate_limit=0 backlog_limit=320 lost=0 backlog=0 > -abrtd[1011]: Init complete, entering main loop > -acpid[1026]: starting up with netlink and the input layer > -acpid[1026]: skipping incomplete file /etc/acpi/events/videoconf > -acpid[1026]: 1 rule loaded > -acpid[1026]: waiting for events: event logging is off > -avahi-daemon[1025]: Found user 'avahi' (UID 70) and group 'avahi' (GID 70). > -avahi-daemon[1025]: Successfully dropped root privileges. > -avahi-daemon[1025]: avahi-daemon 0.6.30 starting up. > -auditd[965]: Init complete, auditd 2.1.3 listening for events (startup state enable) > -Loading iSCSI transport class v2.0-870. > -iscsi: registered transport (tcp) > -iscsi: registered transport (iser) > -libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits. > -libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0. > -Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010) > -iscsi: registered transport (cxgb3i) > -Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010) > -iscsi: registered transport (cxgb4i) > -cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.8 (Jan 3, 2012) > -Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.0.3 (Jun 15, 2011) > -iscsi: registered transport (bnx2i) > -iscsi: registered transport (be2iscsi) > sky2 0000:09:00.0: p2p1: enabling interface > ADDRCONF(NETDEV_UP): p2p1: link is not ready > -8021q: 802.1Q VLAN Support v1.8 > -netlink: 12 bytes leftover after parsing attributes. > -netlink: 12 bytes leftover after parsing attributes. > -netlink: 12 bytes leftover after parsing attributes. > +RPC: Registered named UNIX socket transport module. > +RPC: Registered udp transport module. > +RPC: Registered tcp transport module. > +RPC: Registered tcp NFSv4.1 backchannel transport module. > +iwl3945 0000:0b:00.0: loaded firmware version 15.32.2.9 > +Bluetooth: Core ver 2.16 > +NET: Registered protocol family 31 > +Bluetooth: HCI device and connection manager initialized > +Bluetooth: HCI socket layer initialized > +Bluetooth: L2CAP socket layer initialized > +Bluetooth: SCO socket layer initialized > +Bluetooth: BNEP (Ethernet Emulation) ver 1.3 > +Bluetooth: BNEP filters: protocol multicast > +ADDRCONF(NETDEV_UP): wlan0: link is not ready > +ip6_tables: (C) 2000-2006 Netfilter Core Team > composite sync not supported > composite sync not supported > +SELinux: initialized (dev fuse, type fuse), uses genfs_contexts > composite sync not supported > +wlan0: authenticate with 80:b6:86:6b:2f:d8 > +wlan0: send auth to 80:b6:86:6b:2f:d8 (try 1/3) > +wlan0: authenticated > +wlan0: associate with 80:b6:86:6b:2f:d8 (try 1/3) > +wlan0: RX AssocResp from 80:b6:86:6b:2f:d8 (capab=0x411 status=0 aid=2) > +wlan0: associated > +ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready > composite sync not supported > -hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. > +wlan0: no IPv6 routers present >
On Mon, Jul 2, 2012 at 2:49 PM, Kamil Grzebien <ciptok@gmail.com> wrote: > On Mon, Jul 2, 2012 at 6:31 AM, Stanislaw Gruszka <sgruszka@redhat.com> wrote: >> On Sun, Jul 01, 2012 at 07:01:58PM +0100, Kamil Grzebien wrote: >>> I haven't tried your patch yet, but wanted to share with one thing. >>> Currently I use new kernel 3.4.3, where the problem doesn't exist >>> anymore. However I still would like to know what was the cause and >>> which change brought the solution. Is there anything which comes to >>> your mind in terms of recent changes in kernel? I also added logs from >>> the newest kernel, so it might be easier for track it. >> >> Below is the diff from working kernel and non working kernel. >> You are using PAE kernel what influence PCI mappings. Is this fixed also >> on 3.4 non-PAE kernel? > > The problem is also fixed in non-PAE kernel. I've attached the logs > from that kernel also. Besides that currently I was comparing both PAE > kernels installed on my machine - kernel 3.3.7 (problem exist) and > kernel 3.4.3 (problem solved). There must be something that has > changed either in the code or maybe kernel configuration!? I compared your 3.3.0 and 3.4.3 logs: -Linux version 3.3.0-4.fc16.i686 (mockbuild@x86-04.phx2.fedoraproject.org) gcc version 4.6.2 20111027 (Red Hat 4.6.2-1) (GCC) ) #1 SMP Tue Mar 20 18:45:14 UTC 2012 +Linux version 3.4.3-1.fc17.i686 (mockbuild@x86-04.phx2.fedoraproject.org) gcc version 4.7.0 20120507 (Red Hat 4.7.0-5) (GCC) ) #1 SMP Mon Jun 18 20:52:37 UTC 2012 I don't see much that's different, except this: -pci 0000:03:09.1: reg 10: [mem 0xf1bff400-0xf1bff4ff] +pci 0000:03:09.1: reg 10: [mem 0xf1bff500-0xf1bff5ff] which hints that the BIOS configured that device (an SD Host controller) differently. Is it possible that a BIOS setup change is what made the difference? Can you reproduce the failure and success on the exact same hardware & BIOS setup? I also notice the 3.3.0 failure was apparently on battery power and the 3.4.3 success was with AC power. Shouldn't matter, but obviously *something* that shouldn't matter does matter in this case. The problem device is 0000:0b:00.0, and the bridge 00:1c.1 leads to bus 0b. There's a little bit more noise in 3.4.3 related to 1c.1 bridge windows, but the ultimate configuration is the same except for the 64-bit pref window, which 0b:00.0 doesn't use anyway: pci 0000:0b:00.0: reg 10: [mem 0xf1eff000-0xf1efffff] -pci 0000:00:1c.1: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref] +pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 0b-0b] add_size 1000 +pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b-0b] add_size 200000 +pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 +pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 +pci 0000:00:1c.1: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref] pci_bus 0000:0b: resource 1 [mem 0xf1e00000-0xf1efffff] -pci_bus 0000:0b: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref] +pci_bus 0000:0b: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref] Any ideas, Yinghai? Bjorn -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Jul 6, 2012 at 1:38 PM, Bjorn Helgaas <bhelgaas@google.com> wrote: > pci 0000:0b:00.0: reg 10: [mem 0xf1eff000-0xf1efffff] > -pci 0000:00:1c.1: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref] > +pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 0b-0b] > add_size 1000 > +pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus > 0b-0b] add_size 200000 > +pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] > get_res_add_size add_size 200000 > +pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 > +pci 0000:00:1c.1: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref] > pci_bus 0000:0b: resource 1 [mem 0xf1e00000-0xf1efffff] > -pci_bus 0000:0b: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref] > +pci_bus 0000:0b: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref] Those wild print out about add_size is used to double check if the option size is passed correctly. diff between 3.3 and 3.4: in kernel 3.4, 1c.0 pref mem64 get allocated before 1c.1 pref mem64. that should be caused by: We replaced local version resource list with generic list. But that should not be reason for why 3.3 does not work on Kamil's setup. I would suspect that pci pm change fixes the problem. Thanks Yinghai -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
--- bad/dmesg.log 2012-05-28 15:12:13.559424823 +0200 +++ dmesg.log 2012-07-02 07:22:35.534393336 +0200 @@ -1,6 +1,6 @@ Initializing cgroup subsys cpuset Initializing cgroup subsys cpu -Linux version 3.3.0-4.fc16.i686 (mockbuild@x86-04.phx2.fedoraproject.org) (gcc version 4.6.2 20111027 (Red Hat 4.6.2-1) (GCC) ) #1 SMP Tue Mar 20 18:45:14 UTC 2012 +Linux version 3.4.3-1.fc17.i686.PAE (mockbuild@x86-04.phx2.fedoraproject.org) (gcc version 4.7.0 20120507 (Red Hat 4.7.0-5) (GCC) ) #1 SMP Mon Jun 18 20:31:39 UTC 2012 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) @@ -14,12 +14,12 @@ BIOS-provided physical RAM map: BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000120000000 (usable) -Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! +NX (Execute Disable) protection: active DMI 2.4 present. DMI: Dell Inc. XPS M1530 /0D501F, BIOS A12 11/19/2008 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) -last_pfn = 0xdfe72 max_arch_pfn = 0x100000 +last_pfn = 0x120000 max_arch_pfn = 0x1000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back @@ -52,14 +52,14 @@ reg 1, base: 3583MB, range: 1MB, type UC reg 2, base: 3584MB, range: 512MB, type UC reg 3, base: 4GB, range: 512MB, type WB e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved) -initial memory mapped : 0 - 01000000 -9b000 size 16384 -init_memory_mapping: 0000000000000000-00000000373fe000 - 0000000000 - 0000400000 page 4k - 0000400000 - 0037000000 page 2M - 0037000000 - 00373fe000 page 4k -kernel direct mapping tables up to 373fe000 @ ffa000-1000000 -RAMDISK: 35f5c000 - 36fa6000 +initial memory mapped : 0 - 01200000 +Base memory trampoline at [c009b000] 9b000 size 16384 +init_memory_mapping: 0000000000000000-00000000375fe000 + 0000000000 - 0000200000 page 4k + 0000200000 - 0037400000 page 2M + 0037400000 - 00375fe000 page 4k +kernel direct mapping tables up to 375fe000 @ 11f8000-1200000 +RAMDISK: 3615c000 - 370a6000 ACPI: RSDP 000fbc90 00024 (v02 DELL ) ACPI: XSDT dfe73a00 00064 (v01 DELL M08 27D80B13 ASL 00000061) ACPI: FACP dfe7389c 000F4 (v04 DELL M08 27D80B13 ASL 00000061) @@ -73,35 +73,36 @@ ACPI: OSFR dfe73200 0002C (v01 DELL M ACPI: BOOT dfe737c0 00028 (v01 DELL M08 27D80B13 ASL 00000061) ACPI: SSDT dfe7217e 004CC (v01 PmRef CpuPm 00003000 INTL 20050624) ACPI: Local APIC address 0xfee00000 -2698MB HIGHMEM available. -883MB LOWMEM available. - mapped low ram: 0 - 373fe000 - low ram: 0 - 373fe000 +3722MB HIGHMEM available. +885MB LOWMEM available. + mapped low ram: 0 - 375fe000 + low ram: 0 - 375fe000 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 - Normal 0x00001000 -> 0x000373fe - HighMem 0x000373fe -> 0x000dfe72 + Normal 0x00001000 -> 0x000375fe + HighMem 0x000375fe -> 0x00120000 Movable zone start PFN for each node Early memory PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x000dfe72 -On node 0 totalpages: 916993 -free_area_init_node: node 0, pgdat c0ba2f00, node_mem_map f435c200 + 0: 0x00100000 -> 0x00120000 +On node 0 totalpages: 1048065 +free_area_init_node: node 0, pgdat c0bd0d40, node_mem_map f3d5c200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3951 pages, LIFO batch:0 - Normal zone: 1736 pages used for memmap - Normal zone: 220470 pages, LIFO batch:31 - HighMem zone: 5397 pages used for memmap - HighMem zone: 685407 pages, LIFO batch:31 + Normal zone: 1740 pages used for memmap + Normal zone: 220978 pages, LIFO batch:31 + HighMem zone: 7445 pages used for memmap + HighMem zone: 813919 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 -enabled) -enabled) -high edge lint[0x1]) -high edge lint[0x1]) -gsi_base[0]) +ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) +ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) +ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) +ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) +ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) @@ -117,40 +118,39 @@ PM: Registered nosave memory: 0000000000 Allocating PCI resources starting at e0000000 (gap: e0000000:18000000) Booting paravirtualized kernel on bare hardware setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 -PERCPU: Embedded 13 pages/cpu @f3c00000 s31168 r0 d22080 u2097152 -pcpu-alloc: s31168 r0 d22080 u2097152 alloc=1*4194304 -0 1 -Built 1 zonelists in Zone order, mobility grouping on. Total pages: 909828 -Kernel command line: BOOT_IMAGE=/vmlinuz-3.3.0-4.fc16.i686 root=UUID=7417d839-a647-466e-b57d-fc65d20a6342 ro rd.md=0 rd.lvm=0 rd.dm=0 quiet SYSFONT=latarcyrheb-sun16 rhgb rd.luks=0 KEYTABLE=pl2 LANG=en_US.UTF-8 +PERCPU: Embedded 14 pages/cpu @f75cf000 s34112 r0 d23232 u57344 +pcpu-alloc: s34112 r0 d23232 u57344 alloc=14*4096 +pcpu-alloc: [0] 0 [0] 1 +Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1038848 +Kernel command line: BOOT_IMAGE=/vmlinuz-3.4.3-1.fc17.i686.PAE root=UUID=29c27e52-ab08-4c1a-9ed7-86ab260b207b ro rd.md=0 rd.lvm=0 rd.dm=0 SYSFONT=True KEYTABLE=pl2 rd.luks=0 LANG=pl_PL.UTF-8 rhgb quiet PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Initializing CPU#0 -allocated 7336720 bytes of page_cgroup +allocated 9437056 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups -Initializing HighMem for node 0 (000373fe:000dfe72) -Memory: 3605028k/3668424k available (5337k kernel code, 62944k reserved, 2570k data, 620k init, 2763216k highmem) +Initializing HighMem for node 0 (000375fe:00120000) +Memory: 4119724k/4718592k available (5442k kernel code, 72536k reserved, 2650k data, 640k init, 3285456k highmem) virtual kernel memory layout: fixmap : 0xffa96000 - 0xfffff000 (5540 kB) - pkmap : 0xff400000 - 0xff800000 (4096 kB) - vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) - lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) - .init : 0xc0bb9000 - 0xc0c54000 ( 620 kB) - .data : 0xc093671f - 0xc0bb8f80 (2570 kB) - .text : 0xc0400000 - 0xc093671f (5337 kB) + pkmap : 0xff600000 - 0xff800000 (2048 kB) + vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB) + lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB) + .init : 0xc0be8000 - 0xc0c88000 ( 640 kB) + .data : 0xc0950a93 - 0xc0be7480 (2650 kB) + .text : 0xc0400000 - 0xc0950a93 (5442 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. - RCU dyntick-idle grace-period acceleration is enabled. NR_IRQS:2304 nr_irqs:512 16 CPU 0 irqstacks, hard=f3008000 soft=f300a000 Extended CMOS year: 2000 Console: colour dummy device 80x25 -enabled +console [tty0] enabled hpet clockevent registered Fast TSC calibration using PIT -Detected 2394.148 MHz processor. -Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.29 BogoMIPS (lpj=2394148) +Detected 2393.857 MHz processor. +Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.71 BogoMIPS (lpj=2393857) pid_max: default: 32768 minimum: 301 Security Framework initialized SELinux: Initializing. @@ -168,12 +168,12 @@ CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. -ACPI: Core revision 20120111 -ftrace: allocating 21899 entries in 43 pages +ACPI: Core revision 20120320 +ftrace: allocating 22370 entries in 44 pages Enabling APIC mode: Flat. Using 1 I/O APICs ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06 -Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. +Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic registers: 2 @@ -181,17 +181,16 @@ Performance Events: PEBS fmt0+, Core2 ev ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 -NMI watchdog enabled, takes one hw-pmu counter. -CPU 1 irqstacks, hard=f30ce000 soft=f30d8000 +NMI watchdog: enabled, takes one hw-pmu counter. +CPU 1 irqstacks, hard=f30e0000 soft=f30e2000 Booting Node 0, Processors #1 Ok. -smpboot cpu 1: start_ip = 9b000 Initializing CPU#1 -NMI watchdog enabled, takes one hw-pmu counter. +NMI watchdog: enabled, takes one hw-pmu counter. Brought up 2 CPUs -Total of 2 processors activated (9576.59 BogoMIPS). +Total of 2 processors activated (9575.42 BogoMIPS). devtmpfs: initialized atomic64 test passed for i586+ platform with CX8 and with SSE -RTC time: 12:29:27, date: 04/08/12 +RTC time: 18:54:40, date: 07/01/12 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) @@ -222,7 +221,7 @@ ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug -(domain 0000 [bus 00-ff]) +ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] @@ -235,7 +234,7 @@ pci_root PNP0A03:00: host bridge window pci_root PNP0A03:00: host bridge window [mem 0xfeda7000-0xfedfffff] pci_root PNP0A03:00: host bridge window [mem 0xfee10000-0xff9fffff] pci_root PNP0A03:00: host bridge window [mem 0xffc00000-0xffdfffff] -pci_root PNP0A03:00: host bridge window [0x120000000-0x317ffffff] (ignored, not CPU addressable) +pci_root PNP0A03:00: host bridge window [mem 0x120000000-0x317ffffff] PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] @@ -249,48 +248,49 @@ pci_bus 0000:00: root bus resource [mem pci_bus 0000:00: root bus resource [mem 0xfeda7000-0xfedfffff] pci_bus 0000:00: root bus resource [mem 0xfee10000-0xff9fffff] pci_bus 0000:00: root bus resource [mem 0xffc00000-0xffdfffff] -type 0 class 0x000600 -type 1 class 0x000604 +pci_bus 0000:00: root bus resource [mem 0x120000000-0x317ffffff] +pci 0000:00:00.0: [8086:2a00] type 00 class 0x060000 +pci 0000:00:01.0: [8086:2a01] type 01 class 0x060400 pci 0000:00:01.0: PME# supported from D0 D3hot D3cold -type 0 class 0x000c03 +pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300 pci 0000:00:1a.0: reg 20: [io 0x6f20-0x6f3f] -type 0 class 0x000c03 +pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300 pci 0000:00:1a.1: reg 20: [io 0x6f00-0x6f1f] -pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03 +pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320 pci 0000:00:1a.7: reg 10: [mem 0xfed1c400-0xfed1c7ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold -pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403 +pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300 pci 0000:00:1b.0: reg 10: [mem 0xf6ffc000-0xf6ffffff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold -pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604 +pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold -type 1 class 0x000604 +pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400 pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold -type 1 class 0x000604 +pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400 pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold -type 0 class 0x000c03 +pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300 pci 0000:00:1d.0: reg 20: [io 0x6f80-0x6f9f] -type 0 class 0x000c03 +pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300 pci 0000:00:1d.1: reg 20: [io 0x6f60-0x6f7f] -type 0 class 0x000c03 +pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300 pci 0000:00:1d.2: reg 20: [io 0x6f40-0x6f5f] -type 0 class 0x000c03 +pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320 pci 0000:00:1d.7: reg 10: [mem 0xfed1c000-0xfed1c3ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold -type 1 class 0x000604 -type 0 class 0x000601 +pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401 +pci 0000:00:1f.0: [8086:2815] type 00 class 0x060100 pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 006c (mask 0007) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f) -type 0 class 0x000101 +pci 0000:00:1f.1: [8086:2850] type 00 class 0x01018a pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7] pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7] pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177] pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377] pci 0000:00:1f.1: reg 20: [io 0x6fa0-0x6faf] -type 0 class 0x000106 +pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601 pci 0000:00:1f.2: reg 10: [io 0x6eb0-0x6eb7] pci 0000:00:1f.2: reg 14: [io 0x6eb8-0x6ebb] pci 0000:00:1f.2: reg 18: [io 0x6ec0-0x6ec7] @@ -298,10 +298,10 @@ pci 0000:00:1f.2: reg 1c: [io 0x6ec8-0x pci 0000:00:1f.2: reg 20: [io 0x6ee0-0x6eff] pci 0000:00:1f.2: reg 24: [mem 0xf6ffb800-0xf6ffbfff] pci 0000:00:1f.2: PME# supported from D3hot -pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05 +pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500 pci 0000:00:1f.3: reg 10: [mem 0xf6ffb700-0xf6ffb7ff] pci 0000:00:1f.3: reg 20: [io 0x10c0-0x10df] -type 0 class 0x000300 +pci 0000:01:00.0: [10de:0407] type 00 class 0x030000 pci 0000:01:00.0: reg 10: [mem 0xf5000000-0xf5ffffff] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:01:00.0: reg 1c: [mem 0xf2000000-0xf3ffffff 64bit] @@ -311,7 +311,7 @@ pci 0000:00:01.0: PCI bridge to [bus 01- pci 0000:00:01.0: bridge window [io 0xe000-0xefff] pci 0000:00:01.0: bridge window [mem 0xf2000000-0xf6efffff] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] -type 0 class 0x000200 +pci 0000:09:00.0: [11ab:4354] type 00 class 0x020000 pci 0000:09:00.0: reg 10: [mem 0xf1ffc000-0xf1ffffff 64bit] pci 0000:09:00.0: reg 18: [io 0xde00-0xdeff] pci 0000:09:00.0: supports D1 D2 @@ -319,7 +319,7 @@ pci 0000:09:00.0: PME# supported from D0 pci 0000:00:1c.0: PCI bridge to [bus 09-09] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] pci 0000:00:1c.0: bridge window [mem 0xf1f00000-0xf1ffffff] -type 0 class 0x000280 +pci 0000:0b:00.0: [8086:4222] type 00 class 0x028000 pci 0000:0b:00.0: reg 10: [mem 0xf1eff000-0xf1efffff] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold pci 0000:0b:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' @@ -329,27 +329,25 @@ pci 0000:00:1c.4: PCI bridge to [bus 0c- pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] pci 0000:00:1c.4: bridge window [mem 0xf1c00000-0xf1dfffff] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf01fffff 64bit pref] -type 0 class 0x000c00 -pci 0000:03:09.0: proprietary Ricoh MMC controller disabled (via firewire function) -pci 0000:03:09.0: MMC cards are now supported by standard SDHCI controller +pci 0000:03:09.0: [1180:0832] type 00 class 0x0c0010 pci 0000:03:09.0: reg 10: [mem 0xf1bff800-0xf1bfffff] pci 0000:03:09.0: supports D1 D2 pci 0000:03:09.0: PME# supported from D0 D1 D2 D3hot D3cold -type 0 class 0x000805 -pci 0000:03:09.1: reg 10: [mem 0xf1bff400-0xf1bff4ff] +pci 0000:03:09.1: [1180:0822] type 00 class 0x080501 +pci 0000:03:09.1: reg 10: [mem 0xf1bff500-0xf1bff5ff] pci 0000:03:09.1: supports D1 D2 pci 0000:03:09.1: PME# supported from D0 D1 D2 D3hot D3cold -type 0 class 0x000880 +pci 0000:03:09.2: [1180:0592] type 00 class 0x088000 pci 0000:03:09.2: reg 10: [mem 0xf1bff600-0xf1bff6ff] pci 0000:03:09.2: supports D1 D2 pci 0000:03:09.2: PME# supported from D0 D1 D2 D3hot D3cold -type 0 class 0x000880 +pci 0000:03:09.3: [1180:0852] type 00 class 0x088000 pci 0000:03:09.3: reg 10: [mem 0xf1bff700-0xf1bff7ff] pci 0000:03:09.3: supports D1 D2 pci 0000:03:09.3: PME# supported from D0 D1 D2 D3hot D3cold -(subtractive decode) +pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xf1b00000-0xf1bfffff] -(subtractive decode) +pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) @@ -361,6 +359,7 @@ pci 0000:00:1e.0: bridge window [mem 0 pci 0000:00:1e.0: bridge window [mem 0xfeda7000-0xfedfffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xfee10000-0xff9fffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xffc00000-0xffdfffff] (subtractive decode) +pci 0000:00:1e.0: bridge window [mem 0x120000000-0x317ffffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] @@ -415,7 +414,7 @@ pnp 00:00: [mem 0xfed90000-0xfed9ffff wi pnp 00:00: [mem 0xfeda7000-0xfedfffff window] pnp 00:00: [mem 0xfee10000-0xff9fffff window] pnp 00:00: [mem 0xffc00000-0xffdfffff window] -pnp 00:00: [mem 0x20000000-0x17ffffff window] +pnp 00:00: [mem 0x120000000-0x317ffffff window] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:01: [io 0x004e-0x004f] pnp 00:01: [io 0x0068-0x006f] @@ -468,10 +467,10 @@ pnp 00:0a: [irq 0 disabled] pnp 00:0a: [io 0x04d0-0x04d1] pnp 00:0a: [io 0x1000-0x1005] pnp 00:0a: [io 0x1008-0x100f] -because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] +pnp 00:0a: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] pnp 00:0a: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] system 00:0a: [io 0x0900-0x097f] has been reserved -has been reserved +system 00:0a: [io 0x04d0-0x04d1] has been reserved system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:0b: [io 0xf400-0xf4fe] pnp 00:0b: [io 0x0086] @@ -481,13 +480,13 @@ pnp 00:0b: [io 0x1080-0x10bf] pnp 00:0b: [io 0x10c0-0x10df] pnp 00:0b: [io 0x1010-0x102f] pnp 00:0b: [io 0x0809] -because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] -because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] +pnp 00:0b: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] +pnp 00:0b: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] pnp 00:0b: disabling [io 0x1010-0x102f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f] system 00:0b: [io 0xf400-0xf4fe] has been reserved system 00:0b: [io 0x1080-0x10bf] has been reserved system 00:0b: [io 0x10c0-0x10df] has been reserved -has been reserved +system 00:0b: [io 0x0809] has been reserved system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:0c: [mem 0x00000000-0x0009efff] pnp 00:0c: [mem 0x0009f000-0x0009ffff] @@ -528,10 +527,15 @@ system 00:0c: [mem 0xf8000000-0xfbffffff system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered -PCI: max bus depth: 1 pci_try_num: 2 -pci 0000:00:1c.1: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref] +pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 09-09] add_size 200000 +pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 0b-0b] add_size 1000 +pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b-0b] add_size 200000 +pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 +pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 +pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 +pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref] +pci 0000:00:1c.1: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff] -pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref] pci 0000:01:00.0: BAR 6: assigned [mem 0xf4000000-0xf401ffff pref] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] @@ -540,11 +544,11 @@ pci 0000:00:01.0: bridge window [mem 0 pci 0000:00:1c.0: PCI bridge to [bus 09-09] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff] pci 0000:00:1c.0: bridge window [mem 0xf1f00000-0xf1ffffff] -pci 0000:00:1c.0: bridge window [mem 0xf0400000-0xf05fffff 64bit pref] +pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf03fffff 64bit pref] pci 0000:00:1c.1: PCI bridge to [bus 0b-0b] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.1: bridge window [mem 0xf1e00000-0xf1efffff] -pci 0000:00:1c.1: bridge window [mem 0xf0200000-0xf03fffff 64bit pref] +pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf05fffff 64bit pref] pci 0000:00:1c.4: PCI bridge to [bus 0c-0d] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] pci 0000:00:1c.4: bridge window [mem 0xf1c00000-0xf1dfffff] @@ -564,15 +568,16 @@ pci_bus 0000:00: resource 12 [mem 0xfed9 pci_bus 0000:00: resource 13 [mem 0xfeda7000-0xfedfffff] pci_bus 0000:00: resource 14 [mem 0xfee10000-0xff9fffff] pci_bus 0000:00: resource 15 [mem 0xffc00000-0xffdfffff] +pci_bus 0000:00: resource 16 [mem 0x120000000-0x317ffffff] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] pci_bus 0000:01: resource 1 [mem 0xf2000000-0xf6efffff] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] pci_bus 0000:09: resource 0 [io 0xd000-0xdfff] pci_bus 0000:09: resource 1 [mem 0xf1f00000-0xf1ffffff] -pci_bus 0000:09: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref] +pci_bus 0000:09: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref] pci_bus 0000:0b: resource 0 [io 0x2000-0x2fff] pci_bus 0000:0b: resource 1 [mem 0xf1e00000-0xf1efffff] -pci_bus 0000:0b: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref] +pci_bus 0000:0b: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref] pci_bus 0000:0c: resource 0 [io 0xc000-0xcfff] pci_bus 0000:0c: resource 1 [mem 0xf1c00000-0xf1dfffff] pci_bus 0000:0c: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref] @@ -589,29 +594,29 @@ pci_bus 0000:03: resource 12 [mem 0xfed9 pci_bus 0000:03: resource 13 [mem 0xfeda7000-0xfedfffff] pci_bus 0000:03: resource 14 [mem 0xfee10000-0xff9fffff] pci_bus 0000:03: resource 15 [mem 0xffc00000-0xffdfffff] +pci_bus 0000:03: resource 16 [mem 0x120000000-0x317ffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) -TCP reno registered +TCP: reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 pci 0000:01:00.0: Boot video device PCI: CLS 64 bytes, default 64 Unpacking initramfs... -Freeing initrd memory: 16680k freed +Freeing initrd memory: 15656k freed Simple Boot Flag at 0x79 set to 0x1 apm: BIOS not found. -Intel AES-NI instructions are not detected. audit: initializing netlink socket (disabled) -type=2000 audit(1333888166.549:1): initialized +type=2000 audit(1341168880.516:1): initialized highmem bounce pool size: 64 pages -HugeTLB registered 4 MB page size, pre-allocated 0 pages +HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) -msgmni has been set to 1676 +msgmni has been set to 1660 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) NET: Registered protocol family 38 @@ -626,14 +631,13 @@ pcieport 0000:00:1c.4: irq 43 for MSI/MS pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 -registered -vesafb: mode is 1024x768x32, linelength=4096, pages=0 +acpiphp: Slot [1] registered +vesafb: mode is 1440x900x32, linelength=5760, pages=0 vesafb: scrolling: redraw vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 -vesafb: framebuffer at 0xf3000000, mapped to 0xf7c80000, using 3072k, total 3072k -Console: switching to colour frame buffer device 128x48 +vesafb: framebuffer at 0xf3000000, mapped to 0xf7e80000, using 5120k, total 5120k +Console: switching to colour frame buffer device 180x56 fb0: VESA VGA frame buffer device -intel_idle: MWAIT substates: 0x3122220 intel_idle: does not run on family 6 model 23 ACPI: AC Adapter [AC] (off-line) input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 @@ -642,17 +646,15 @@ input: Power Button as /devices/LNXSYSTM ACPI: Power Button [PBTN] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 ACPI: Sleep Button [SBTN] +ACPI: Requesting acpi_cpufreq Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state Marking TSC unstable due to TSC halts in idle ACPI: acpi_idle registered with cpuidle thermal LNXTHERM:00: registered as thermal_zone0 -ACPI: Thermal Zone [THM] (32 C) +ACPI: Thermal Zone [THM] (53 C) GHES: HEST is not enabled! -isapnp: Scanning for PnP cards... -(battery present) -isapnp: No Plug & Play device found Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Non-volatile memory driver v1.3 Linux agpgart interface v0.103 @@ -662,6 +664,7 @@ ahci 0000:00:1f.2: irq 44 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc ems ahci 0000:00:1f.2: setting latency timer to 64 +ACPI: Battery Slot [BAT0] (battery present) scsi0 : ahci scsi1 : ahci scsi2 : ahci @@ -687,7 +690,7 @@ ehci_hcd 0000:00:1a.7: USB 2.0 started, usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller -usb usb1: Manufacturer: Linux 3.3.0-4.fc16.i686 ehci_hcd +usb usb1: Manufacturer: Linux 3.4.3-1.fc17.i686.PAE ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected @@ -701,7 +704,7 @@ ehci_hcd 0000:00:1d.7: USB 2.0 started, usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller -usb usb2: Manufacturer: Linux 3.3.0-4.fc16.i686 ehci_hcd +usb usb2: Manufacturer: Linux 3.4.3-1.fc17.i686.PAE ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected @@ -714,7 +717,7 @@ uhci_hcd 0000:00:1a.0: irq 20, io base 0 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller -usb usb3: Manufacturer: Linux 3.3.0-4.fc16.i686 uhci_hcd +usb usb3: Manufacturer: Linux 3.4.3-1.fc17.i686.PAE uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected @@ -725,7 +728,7 @@ uhci_hcd 0000:00:1a.1: irq 21, io base 0 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller -usb usb4: Manufacturer: Linux 3.3.0-4.fc16.i686 uhci_hcd +usb usb4: Manufacturer: Linux 3.4.3-1.fc17.i686.PAE uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected @@ -736,7 +739,7 @@ uhci_hcd 0000:00:1d.0: irq 20, io base 0 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller -usb usb5: Manufacturer: Linux 3.3.0-4.fc16.i686 uhci_hcd +usb usb5: Manufacturer: Linux 3.4.3-1.fc17.i686.PAE uhci_hcd usb usb5: SerialNumber: 0000:00:1d.0 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected @@ -747,7 +750,7 @@ uhci_hcd 0000:00:1d.1: irq 21, io base 0 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller -usb usb6: Manufacturer: Linux 3.3.0-4.fc16.i686 uhci_hcd +usb usb6: Manufacturer: Linux 3.4.3-1.fc17.i686.PAE uhci_hcd usb usb6: SerialNumber: 0000:00:1d.1 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected @@ -758,13 +761,13 @@ uhci_hcd 0000:00:1d.2: irq 22, io base 0 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller -usb usb7: Manufacturer: Linux 3.3.0-4.fc16.i686 uhci_hcd +usb usb7: Manufacturer: Linux 3.4.3-1.fc17.i686.PAE uhci_hcd usb usb7: SerialNumber: 0000:00:1d.2 hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usbcore: registered new interface driver usbserial -USB Serial support registered for generic usbcore: registered new interface driver usbserial_generic +USB Serial support registered for generic usbserial: USB Serial Driver core i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 @@ -781,7 +784,7 @@ EFI Variables Facility v0.08 2004-May-17 usbcore: registered new interface driver usbhid usbhid: USB HID core driver ip_tables: (C) 2000-2006 Netfilter Core Team -TCP cubic registered +TCP: cubic registered Initializing XFRM netlink socket NET: Registered protocol family 10 Mobile IPv6 @@ -790,56 +793,56 @@ Registering the dns_resolver key type Using IPI No-Shortcut mode PM: Hibernation image not present or could not be loaded. registered taskstats version 1 - Magic number: 8:784:480 -rtc_cmos 00:04: setting system clock to 2012-04-08 12:29:28 UTC (1333888168) + Magic number: 4:879:947 +tty tty4: hash matches +rtc_cmos 00:04: setting system clock to 2012-07-01 18:54:41 UTC (1341168881) Initializing network drop monitor service input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 ata4.00: ATAPI: Optiarc DVD+/-RW AD-7640A, JD05, max UDMA/33 ata4.00: configured for UDMA/33 ata3: SATA link down (SStatus 0 SControl 300) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) -ata1.00: ATA-7: ST9200420ASG, 3.ADD, max UDMA/133 -ata1.00: 390721968 sectors, multi 8: LBA48 NCQ (depth 31/32) +ata1.00: ATA-9: OCZ-VERTEX4, 1.3, max UDMA/133 +ata1.00: 500118192 sectors, multi 8: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/133 -scsi 0:0:0:0: Direct-Access ATA ST9200420ASG 3.AD PQ: 0 ANSI: 5 +scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX4 1.3 PQ: 0 ANSI: 5 +sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) sd 0:0:0:0: Attached scsi generic sg0 type 0 -sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA scsi 3:0:0:0: CD-ROM Optiarc DVD+-RW AD-7640A JD05 PQ: 0 ANSI: 5 + sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 > usb 1-1: new high-speed USB device number 2 using ehci_hcd +sd 0:0:0:0: [sda] Attached SCSI disk sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy cdrom: Uniform CD-ROM driver Revision: 3.20 sr 3:0:0:0: Attached scsi CD-ROM sr0 sr 3:0:0:0: Attached scsi generic sg1 type 5 - sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 > -sd 0:0:0:0: [sda] Attached SCSI disk -Freeing unused kernel memory: 620k freed -Write protecting the kernel text: 5340k -Write protecting the kernel read-only data: 2096k +Freeing unused kernel memory: 640k freed +Write protecting the kernel text: 5444k +Write protecting the kernel read-only data: 2140k +NX-protecting the kernel data: 4796k +dracut: dracut-018-40.git20120522.fc17 usb 1-1: New USB device found, idVendor=05a9, idProduct=2640 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1: Product: Laptop Integrated Webcam usb 1-1: Manufacturer: OmniVision Technologies, Inc. -2640-07.07.20.3 -dracut: dracut-013-20.fc16 dracut: rd.luks=0: removing cryptoluks activation -dracut: rd.lvm=0: removing LVM activation -udevd[111]: starting version 173 -wmi: Mapper loaded +udevd[111]: starting version 182 +[drm] Initialized drm 1.1.0 20060810 acpi device:31: registered as cooling_device2 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2e/LNXVIDEO:00/input/input4 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) -[drm] Initialized drm 1.1.0 20060810 -VGA switcheroo: detected Optimus DSM method \ handle +wmi: Mapper loaded [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x084700a2) -checking generic (f3000000 300000) vs hw (e0000000 10000000) -checking generic (f3000000 300000) vs hw (f2000000 2000000) +checking generic (f3000000 500000) vs hw (e0000000 10000000) +checking generic (f3000000 500000) vs hw (f2000000 2000000) fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver Console: switching to colour dummy device 80x25 -[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN -usb 2-2: new high-speed USB device number 3 using ehci_hcd +[drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS [drm] nouveau 0000:01:00.0: ... appears to be valid +[drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN [drm] nouveau 0000:01:00.0: BIT BIOS found [drm] nouveau 0000:01:00.0: Bios version 60.84.5e.00 [drm] nouveau 0000:01:00.0: TMDS table version 2.0 @@ -859,27 +862,14 @@ usb 2-2: new high-speed USB device numbe [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xCB78 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xD5C8 [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD6BA -usb 2-2: New USB device found, idVendor=0bb4, idProduct=0c99 -usb 2-2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 -usb 2-2: Product: Android Phone [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD8ED [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xD952 -usb 2-2: Manufacturer: HTC -usb 2-2: SerialNumber: HT999L903452 [drm] nouveau 0000:01:00.0: 0xD952: Condition still not met after 20ms, skipping following opcodes -Initializing USB Mass Storage driver... -scsi5 : usb-storage 2-2:1.0 -[drm] nouveau 0000:01:00.0: 3 available performance level(s) -[drm] nouveau 0000:01:00.0: 0: core 169MHz shader 338MHz memory 100MHz timing 0 voltage 1150mV fanspeed 100% -[drm] nouveau 0000:01:00.0: 1: core 275MHz shader 550MHz memory 301MHz timing 1 voltage 1150mV fanspeed 100% -[drm] nouveau 0000:01:00.0: 2: core 475MHz shader 950MHz memory 702MHz timing 2 voltage 1200mV fanspeed 100% -[drm] nouveau 0000:01:00.0: c: core 275MHz shader 550MHz memory 302MHz voltage 1150mV -usbcore: registered new interface driver usb-storage -USB Mass Storage support registered. -[TTM] Zone kernel: Available graphics memory: 429556 kiB. -[TTM] Zone highmem: Available graphics memory: 1811164 kiB. -[TTM] Initializing pool allocator. -[drm] nouveau 0000:01:00.0: Detected 256MiB VRAM +[TTM] Zone kernel: Available graphics memory: 425282 kiB +[TTM] Zone highmem: Available graphics memory: 2068010 kiB +[TTM] Initializing pool allocator +[TTM] Initializing DMA pool allocator +[drm] nouveau 0000:01:00.0: Detected 256MiB VRAM (GDDR3) mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown @@ -887,6 +877,11 @@ mtrr: type mismatch for e0000000,1000000 [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] No driver support for vblank timestamp query. [drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering our own +[drm] nouveau 0000:01:00.0: 3 available performance level(s) +[drm] nouveau 0000:01:00.0: 0: core 169MHz shader 338MHz memory 100MHz voltage 1150mV fanspeed 100% +[drm] nouveau 0000:01:00.0: 1: core 275MHz shader 550MHz memory 301MHz voltage 1150mV fanspeed 100% +[drm] nouveau 0000:01:00.0: 2: core 475MHz shader 950MHz memory 702MHz voltage 1200mV fanspeed 100% +[drm] nouveau 0000:01:00.0: c: core 275MHz shader 550MHz memory 302MHz voltage 1150mV input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input5 input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input6 usb 3-2: new full-speed USB device number 2 using uhci_hcd @@ -903,66 +898,58 @@ input: A4Tech USB Full Speed as /devices generic-usb 0003:09DA:8090.0001: input,hidraw0: USB HID v1.11 Mouse [A4Tech USB Full Speed] on usb-0000:00:1d.0-1/input0 input: A4Tech USB Full Speed as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.1/input/input8 generic-usb 0003:09DA:8090.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [A4Tech USB Full Speed] on usb-0000:00:1d.0-1/input1 -scsi 5:0:0:0: Direct-Access HTC Android Phone 0100 PQ: 0 ANSI: 2 -sd 5:0:0:0: Attached scsi generic sg2 type 0 -sd 5:0:0:0: [sdb] Attached SCSI removable disk -usb 6-1: new full-speed USB device number 2 using uhci_hcd -usb 6-1: New USB device found, idVendor=054c, idProduct=03d5 -usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 -usb 6-1: Product: Motion Controller -usb 6-1: Manufacturer: Sony Computer Entertainment -input: Sony Computer Entertainment Motion Controller as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input9 -generic-usb 0003:054C:03D5.0003: input,hiddev0,hidraw2: USB HID v1.10 Gamepad [Sony Computer Entertainment Motion Controller] on usb-0000:00:1d.1-1/input0 -composite sync not supported -[drm] nouveau 0000:01:00.0: allocated 1440x900 fb: 0x320000, bo f28cf600 -fbcon: nouveaufb (fb0) is primary device -Console: switching to colour frame buffer device 180x56 -fb0: nouveaufb frame buffer device -drm: registered panic notifier -[drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0 -dracut: Starting plymouth daemon usb 7-2: new full-speed USB device number 2 using uhci_hcd -composite sync not supported -dracut: rd.dm=0: removing DM RAID activation usb 7-2: New USB device found, idVendor=0a5c, idProduct=4500 usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 7-2: Product: BCM2045B2 usb 7-2: Manufacturer: Broadcom -dracut: rd.md=0: removing MD RAID activation hub 7-2:1.0: USB hub found hub 7-2:1.0: 3 ports detected -sdhci: Secure Digital Host Controller Interface driver -sdhci: Copyright(c) Pierre Ossman -(rev 22) -Registered led device: mmc0:: -using DMA -firewire_ohci: Added fw-ohci device 0000:03:09.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x11 +composite sync not supported usb 7-2.2: new full-speed USB device number 3 using uhci_hcd +[drm] nouveau 0000:01:00.0: allocated 1440x900 fb: 0x320000, bo f6c97e00 +fbcon: nouveaufb (fb0) is primary device +Console: switching to colour frame buffer device 180x56 +fb0: nouveaufb frame buffer device +drm: registered panic notifier +[drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0 +dracut: Starting plymouth daemon usb 7-2.2: New USB device found, idVendor=0a5c, idProduct=4502 usb 7-2.2: New USB device strings: Mfr=1, Product=0, SerialNumber=0 usb 7-2.2: Manufacturer: Broadcom Corp -input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.2/7-2.2:1.0/input/input10 -generic-usb 0003:0A5C:4502.0004: input,hidraw3: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1d.2-2.2/input0 +input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.2/7-2.2:1.0/input/input9 +generic-usb 0003:0A5C:4502.0003: input,hidraw2: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1d.2-2.2/input0 +composite sync not supported usb 7-2.3: new full-speed USB device number 4 using uhci_hcd -firewire_core: created device fw0: GUID 334fc0001cece070, S400 usb 7-2.3: New USB device found, idVendor=0a5c, idProduct=4503 usb 7-2.3: New USB device strings: Mfr=1, Product=0, SerialNumber=0 usb 7-2.3: Manufacturer: Broadcom Corp -input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.3/7-2.3:1.0/input/input11 -generic-usb 0003:0A5C:4503.0005: input,hidraw4: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1d.2-2.3/input0 -EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) -dracut: Checking ext4: /dev/disk/by-uuid/7417d839-a647-466e-b57d-fc65d20a6342 -dracut: issuing e2fsck -a /dev/disk/by-uuid/7417d839-a647-466e-b57d-fc65d20a6342 -dracut: _Fedora-16-i686-: clean, 238747/901120 files, 1776110/3584000 blocks -dracut: Remounting /dev/disk/by-uuid/7417d839-a647-466e-b57d-fc65d20a6342 with -o ro -EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) -dracut: Mounted root filesystem /dev/sda7 +input: Broadcom Corp as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.3/7-2.3:1.0/input/input10 +generic-usb 0003:0A5C:4503.0004: input,hidraw3: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1d.2-2.3/input0 +dracut: rd.dm=0: removing DM RAID activation +dracut: rd.md=0: removing MD RAID activation +sdhci: Secure Digital Host Controller Interface driver +sdhci: Copyright(c) Pierre Ossman +firewire_ohci 0000:03:09.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11 +sdhci-pci 0000:03:09.1: SDHCI controller found [1180:0822] (rev 22) +Registered led device: mmc0:: +mmc0: SDHCI controller on PCI [0000:03:09.1] using DMA +EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) +dracut: Checking ext4: /dev/disk/by-uuid/29c27e52-ab08-4c1a-9ed7-86ab260b207b +dracut: issuing e2fsck -a /dev/disk/by-uuid/29c27e52-ab08-4c1a-9ed7-86ab260b207b +dracut: /dev/disk/by-uuid/29c27e52-ab08-4c1a-9ed7-86ab260b207b: clean, 275331/983040 files, 2231118/3932160 blocks +dracut: Remounting /dev/disk/by-uuid/29c27e52-ab08-4c1a-9ed7-86ab260b207b with -o ro +EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) +dracut: Mounted root filesystem /dev/sda6 dracut: Switching root -type=1404 audit(1333888173.684:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 -SELinux: 2048 avtab hash slots, 97362 rules. -SELinux: 2048 avtab hash slots, 97362 rules. -SELinux: 9 users, 13 roles, 3912 types, 215 bools, 1 sens, 1024 cats -SELinux: 82 classes, 97362 rules +type=1404 audit(1341168884.696:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 +firewire_core 0000:03:09.0: created device fw0: GUID 334fc0001cece070, S400 +SELinux: 2048 avtab hash slots, 100708 rules. +SELinux: 2048 avtab hash slots, 100708 rules. +SELinux: 9 users, 15 roles, 4148 types, 223 bools, 1 sens, 1024 cats +SELinux: 83 classes, 100708 rules +SELinux: Permission ptrace_child in class process not defined in policy. +SELinux: the above unknown classes and permissions will be allowed SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts @@ -979,18 +966,17 @@ SELinux: initialized (dev devpts, type d SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts -SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs -SELinux: initialized (dev sda7, type ext4), uses xattr -type=1403 audit(1333888173.953:3): policy loaded auid=4294967295 ses=4294967295 -systemd[1]: Successfully loaded SELinux policy in 347ms 981us. -systemd[1]: Successfully loaded SELinux database in 54ms 927us, size on heap is 365K. +SELinux: initialized (dev sda6, type ext4), uses xattr +SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts +type=1403 audit(1341168885.034:3): policy loaded auid=4294967295 ses=4294967295 +systemd[1]: Successfully loaded SELinux policy in 354ms 350us. systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time. SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts -systemd[1]: Relabelled /dev and /run in 42ms 476us. +systemd[1]: Relabelled /dev and /run in 44ms 145us. SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts @@ -999,62 +985,51 @@ SELinux: initialized (dev cgroup, type c SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts -systemd[1]: systemd 37 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; fedora) +systemd[1]: systemd 44 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP; fedora) systemd[1]: Set hostname to <xps>. SELinux: initialized (dev autofs, type autofs), uses genfs_contexts -udevd[521]: starting version 173 -udevd[521]: specified group 'plugdev' unknown -SELinux: initialized (dev configfs, type configfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs -SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs -SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts -EXT4-fs (sda7): re-mounted. Opts: (null) -RPC: Registered named UNIX socket transport module. -RPC: Registered udp transport module. -RPC: Registered tcp transport module. -RPC: Registered tcp NFSv4.1 backchannel transport module. -SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts -SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts +systemd-journald[309]: Fixed max_use=201.9M max_size=25.2M min_size=64.0K keep_free=100.9M +systemd-journald[309]: Vacuuming... +udevd[307]: starting version 182 +EXT4-fs (sda6): re-mounted. Opts: (null) sky2: driver version 1.30 sky2 0000:09:00.0: Yukon-2 FE+ chip revision 0 sky2 0000:09:00.0: irq 45 for MSI/MSI-X sky2 0000:09:00.0: eth0: addr 00:21:9b:cd:55:50 cfg80211: Calling CRDA to update world regulatory domain -iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:ds -iwl3945: Copyright(c) 2003-2011 Intel Corporation -iwl3945 0000:0b:00.0: enabling device (0000 -> 0002) -iwl3945 0000:0b:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF iTCO_vendor_support: vendor-support=0 -iwl3945 0000:0b:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF -iwl3945 0000:0b:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF -iwl3945 0000:0b:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF -iwl3945 0000:0b:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF -iwl3945 0000:0b:00.0: MAC is in deep sleep!. CSR_GP_CNTRL = 0xFFFFFFFF -iwl3945 0000:0b:00.0: bad EEPROM signature,EEPROM_GP=0x00000007 -iwl3945 0000:0b:00.0: EEPROM not found, EEPROM_GP=0xffffffff -iwl3945 0000:0b:00.0: Unable to init EEPROM iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) -iwl3945: probe of 0000:0b:00.0 failed with error -2 -microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c +Linux media interface: v0.10 +Linux video capture interface: v2.00 +snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X r592: driver successfully loaded -mtp-probe[674]: checking bus 6, device 2: "/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1" -mtp-probe[724]: checking bus 7, device 3: "/sys/devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.2" -mtp-probe[670]: checking bus 5, device 2: "/sys/devices/pci0000:00/0000:00:1d.0/usb5/5-1" -mtp-probe[691]: checking bus 2, device 3: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-2" -mtp-probe[684]: checking bus 1, device 2: "/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-1" -mtp-probe[650]: checking bus 3, device 2: "/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-2" -mtp-probe[730]: checking bus 7, device 4: "/sys/devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2.3" -mtp-probe[691]: bus: 2, device: 3 was not an MTP device -mtp-probe[724]: bus: 7, device: 3 was not an MTP device -mtp-probe[670]: bus: 5, device: 2 was not an MTP device -mtp-probe[684]: bus: 1, device: 2 was not an MTP device -mtp-probe[674]: bus: 6, device: 2 was not an MTP device -mtp-probe[730]: bus: 7, device: 4 was not an MTP device -mtp-probe[650]: bus: 3, device: 2 was not an MTP device +uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640) +input: Laptop Integrated Webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input11 +usbcore: registered new interface driver uvcvideo +USB Video Class driver (1.1.1) +ALSA sound/pci/hda/hda_codec.c:5099 autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker +ALSA sound/pci/hda/hda_codec.c:5103 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) +ALSA sound/pci/hda/hda_codec.c:5107 hp_outs=2 (0xa/0xf/0x0/0x0/0x0) +ALSA sound/pci/hda/hda_codec.c:5108 mono: mono_out=0x0 +ALSA sound/pci/hda/hda_codec.c:5111 dig-out=0x21/0x0 +ALSA sound/pci/hda/hda_codec.c:5112 inputs: +ALSA sound/pci/hda/hda_codec.c:5116 Internal Mic=0xc +ALSA sound/pci/hda/hda_codec.c:5116 Mic=0xe +ALSA sound/pci/hda/hda_codec.c:5118 +ALSA sound/pci/hda/patch_sigmatel.c:3111 stac92xx: dac_nids=2 (0x2/0x5/0x0/0x0/0x0) +iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:ds +iwl3945: Copyright(c) 2003-2011 Intel Corporation +microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c +iwl3945 0000:0b:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels +iwl3945 0000:0b:00.0: Detected Intel Wireless WiFi Link 3945ABG +iwl3945 0000:0b:00.0: irq 47 for MSI/MSI-X +Registered led device: phy0-led +ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs' dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) -r852: driver loaded successfully +input: Dell WMI hotkeys as /devices/virtual/input/input12 cfg80211: World regulatory domain updated: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) @@ -1062,103 +1037,54 @@ cfg80211: (2457000 KHz - 2482000 KHz @ cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) +Adding 4930552k swap on /dev/sda8. Priority:0 extents:1 across:4930552k SS microcode: CPU0 updated to revision 0x60f, date = 2010-09-29 microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c +fuse init (API version 7.18) +udevd[326]: renamed network interface eth0 to p2p1 microcode: CPU1 updated to revision 0x60f, date = 2010-09-29 microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba -Linux media interface: v0.10 -Linux video capture interface: v2.00 -input: Dell WMI hotkeys as /devices/virtual/input/input12 -snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X -uvcvideo: Found UVC 1.00 device Laptop Integrated Webcam (05a9:2640) -uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. -input: Laptop Integrated Webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input13 -usbcore: registered new interface driver uvcvideo -USB Video Class driver (1.1.1) -ALSA sound/pci/hda/hda_codec.c:4927 autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker -ALSA sound/pci/hda/hda_codec.c:4931 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) -ALSA sound/pci/hda/hda_codec.c:4935 hp_outs=2 (0xa/0xf/0x0/0x0/0x0) -ALSA sound/pci/hda/hda_codec.c:4936 mono: mono_out=0x0 -ALSA sound/pci/hda/hda_codec.c:4939 dig-out=0x21/0x0 -ALSA sound/pci/hda/hda_codec.c:4940 inputs: -ALSA sound/pci/hda/hda_codec.c:4944 Internal Mic=0xc -ALSA sound/pci/hda/hda_codec.c:4944 Mic=0xe -ALSA sound/pci/hda/hda_codec.c:4946 -ALSA sound/pci/hda/patch_sigmatel.c:3090 stac92xx: dac_nids=2 (0x2/0x5/0x0/0x0/0x0) -udevd[609]: renamed network interface eth0 to p2p1 -fuse init (API version 7.18) SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts -mount[900]: mount: fusectl already mounted or /sys/fs/fuse/connections busy -mount[900]: mount: according to mtab, fusectl is already mounted on /sys/fs/fuse/connections -systemd[1]: sys-fs-fuse-connections.mount mount process exited, code=exited status=32 -Adding 2047996k swap on /dev/sda8. Priority:0 extents:1 across:2047996k -systemd-fsck[893]: /dev/sda5: clean, 281/76304 files, 117477/304216 blocks -SELinux: initialized (dev sda3, type fuseblk), uses genfs_contexts -ntfs-3g[923]: Version 2011.4.12 integrated FUSE 27 -ntfs-3g[923]: Mounted /dev/sda3 (Read-Write, label "", NTFS 3.1) -ntfs-3g[923]: Cmdline options: rw -ntfs-3g[923]: Mount options: rw,allow_other,nonempty,atime,fsname=/dev/sda3,blkdev,blksize=4096 -ntfs-3g[923]: Ownership and permissions disabled, configuration type 1 -fedora-storage-init[912]: Setting up Logical Volume Management: No volume groups found -fedora-storage-init[912]: [ OK ] +cfg80211: Calling CRDA for country: GB +cfg80211: Regulatory domain changed to country: GB +cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) +cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) +cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) +cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) +cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) +SELinux: initialized (dev sda2, type fuseblk), uses genfs_contexts EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) SELinux: initialized (dev sda5, type ext4), uses xattr -fedora-storage-init[925]: Setting up Logical Volume Management: No volume groups found -fedora-storage-init[925]: [ OK ] -systemd-fsck[903]: /home: clean, 1056585/5799936 files, 19080578/23175424 blocks -lvm[935]: No volume groups found -EXT4-fs (sda6): mounting ext3 file system using the ext4 subsystem -EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) -SELinux: initialized (dev sda6, type ext3), uses xattr -EXT4-fs (sda9): warning: maximal mount count reached, running e2fsck is recommended -EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null) -SELinux: initialized (dev sda9, type ext4), uses xattr -systemd-tmpfiles[951]: Successfully loaded SELinux database in 13ms 399us, size on heap is 366K. +EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) +SELinux: initialized (dev sda7, type ext4), uses xattr nf_conntrack version 0.5.0 (16384 buckets, 65536 max) -auditd[965]: Started dispatcher: /sbin/audispd pid: 990 -iptables.init[959]: iptables: Applying firewall rules: [ OK ] -audispd[990]: priority_boost_parser called with: 4 -audispd[990]: max_restarts_parser called with: 10 -audispd[990]: audispd initialized with q_depth=120 and 1 active plugins -ip6_tables: (C) 2000-2006 Netfilter Core Team -ip6tables.init[960]: ip6tables: Applying firewall rules: [ OK ] -NetworkManager[1003]: <info> NetworkManager (version 0.9.2-1.fc16) is starting... -NetworkManager[1003]: <info> Read config file /etc/NetworkManager/NetworkManager.conf -NetworkManager[1003]: NetworkManager[1003]: <info> NetworkManager (version 0.9.2-1.fc16) is starting... -NetworkManager[1003]: NetworkManager[1003]: <info> Read config file /etc/NetworkManager/NetworkManager.conf -mcelog[996]: mcelog read: No such device -auditctl[973]: No rules -auditctl[973]: AUDIT_STATUS: enabled=0 flag=1 pid=965 rate_limit=0 backlog_limit=320 lost=0 backlog=0 -abrtd[1011]: Init complete, entering main loop -acpid[1026]: starting up with netlink and the input layer -acpid[1026]: skipping incomplete file /etc/acpi/events/videoconf -acpid[1026]: 1 rule loaded -acpid[1026]: waiting for events: event logging is off -avahi-daemon[1025]: Found user 'avahi' (UID 70) and group 'avahi' (GID 70). -avahi-daemon[1025]: Successfully dropped root privileges. -avahi-daemon[1025]: avahi-daemon 0.6.30 starting up. -auditd[965]: Init complete, auditd 2.1.3 listening for events (startup state enable) -Loading iSCSI transport class v2.0-870. -iscsi: registered transport (tcp) -iscsi: registered transport (iser) -libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits. -libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0. -Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010) -iscsi: registered transport (cxgb3i) -Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010) -iscsi: registered transport (cxgb4i) -cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.8 (Jan 3, 2012) -Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.0.3 (Jun 15, 2011) -iscsi: registered transport (bnx2i) -iscsi: registered transport (be2iscsi) sky2 0000:09:00.0: p2p1: enabling interface ADDRCONF(NETDEV_UP): p2p1: link is not ready -8021q: 802.1Q VLAN Support v1.8 -netlink: 12 bytes leftover after parsing attributes. -netlink: 12 bytes leftover after parsing attributes. -netlink: 12 bytes leftover after parsing attributes. +RPC: Registered named UNIX socket transport module. +RPC: Registered udp transport module. +RPC: Registered tcp transport module. +RPC: Registered tcp NFSv4.1 backchannel transport module. +iwl3945 0000:0b:00.0: loaded firmware version 15.32.2.9 +Bluetooth: Core ver 2.16 +NET: Registered protocol family 31 +Bluetooth: HCI device and connection manager initialized +Bluetooth: HCI socket layer initialized +Bluetooth: L2CAP socket layer initialized +Bluetooth: SCO socket layer initialized +Bluetooth: BNEP (Ethernet Emulation) ver 1.3 +Bluetooth: BNEP filters: protocol multicast +ADDRCONF(NETDEV_UP): wlan0: link is not ready +ip6_tables: (C) 2000-2006 Netfilter Core Team composite sync not supported composite sync not supported +SELinux: initialized (dev fuse, type fuse), uses genfs_contexts composite sync not supported +wlan0: authenticate with 80:b6:86:6b:2f:d8 +wlan0: send auth to 80:b6:86:6b:2f:d8 (try 1/3) +wlan0: authenticated +wlan0: associate with 80:b6:86:6b:2f:d8 (try 1/3) +wlan0: RX AssocResp from 80:b6:86:6b:2f:d8 (capab=0x411 status=0 aid=2) +wlan0: associated +ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready composite sync not supported -hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj. +wlan0: no IPv6 routers present