| Message ID | 20120702134901.83708415.izumi.taku@jp.fujitsu.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
On Sun, Jul 1, 2012 at 9:49 PM, Taku Izumi <izumi.taku@jp.fujitsu.com> wrote: > > Currently I/O ports and I/O memory resources are reserved for > hotplug bridges and we can tune their size by using hpiosize > and hpmemsize boot option. > > This patch extends feature so that we can reserve additional > bus number resources for hotplug bridges and tune it by > using "hpbussize" option. > > This patch also adds missing document for "hpiosize" and > "hpmemsize" option. > > Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> > --- > Documentation/kernel-parameters.txt | 10 ++++++++++ > drivers/pci/pci.c | 6 +++++- > drivers/pci/probe.c | 4 ++++ > include/linux/pci.h | 1 + > 4 files changed, 20 insertions(+), 1 deletion(-) > > Index: linux/drivers/pci/pci.c > =================================================================== > --- linux.orig/drivers/pci/pci.c > +++ linux/drivers/pci/pci.c > @@ -74,9 +74,11 @@ unsigned long pci_cardbus_mem_size = DEF > > #define DEFAULT_HOTPLUG_IO_SIZE (256) > #define DEFAULT_HOTPLUG_MEM_SIZE (2*1024*1024) > -/* pci=hpmemsize=nnM,hpiosize=nn can override this */ > +#define DEFAULT_HOTPLUG_BUS_SIZE (0) > +/* pci=hpmemsize=nnM,hpiosize=nn,hpbussize=n can override this */ > unsigned long pci_hotplug_io_size = DEFAULT_HOTPLUG_IO_SIZE; > unsigned long pci_hotplug_mem_size = DEFAULT_HOTPLUG_MEM_SIZE; > +unsigned int pci_hotplug_bus_size = DEFAULT_HOTPLUG_BUS_SIZE; > > enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_TUNE_OFF; > > @@ -3826,6 +3828,8 @@ static int __init pci_setup(char *str) > pci_hotplug_io_size = memparse(str + 9, &str); > } else if (!strncmp(str, "hpmemsize=", 10)) { > pci_hotplug_mem_size = memparse(str + 10, &str); > + } else if (!strncmp(str, "hpbussize=", 10)) { > + pci_hotplug_bus_size = memparse(str + 10, &str); > } else if (!strncmp(str, "pcie_bus_tune_off", 17)) { > pcie_bus_config = PCIE_BUS_TUNE_OFF; > } else if (!strncmp(str, "pcie_bus_safe", 13)) { > Index: linux/drivers/pci/probe.c > =================================================================== > --- linux.orig/drivers/pci/probe.c > +++ linux/drivers/pci/probe.c > @@ -865,6 +865,10 @@ int __devinit pci_scan_bridge(struct pci > /* > * Set the subordinate bus number to its real value. > */ > + if (dev->is_hotplug_bridge) { > + if (max + pci_hotplug_bus_size < child->busn_res.end) > + max += pci_hotplug_bus_size; > + } > pci_bus_update_busn_res_end(child, max); > pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, max); > } > Index: linux/include/linux/pci.h > =================================================================== > --- linux.orig/include/linux/pci.h > +++ linux/include/linux/pci.h > @@ -1517,6 +1517,7 @@ extern u8 pci_cache_line_size; > > extern unsigned long pci_hotplug_io_size; > extern unsigned long pci_hotplug_mem_size; > +extern unsigned int pci_hotplug_bus_size; > > /* Architecture specific versions may override these (weak) */ > int pcibios_add_platform_entries(struct pci_dev *dev); > Index: linux/Documentation/kernel-parameters.txt > =================================================================== > --- linux.orig/Documentation/kernel-parameters.txt > +++ linux/Documentation/kernel-parameters.txt > @@ -2138,6 +2138,16 @@ bytes respectively. Such letter suffixes > cbmemsize=nn[KMG] The fixed amount of bus space which is > reserved for the CardBus bridge's memory > window. The default value is 64 megabytes. > + hpiosize The fixed amount of bus space which is > + reserved for hotplug bridge's IO window. > + The default value is 256 bytes. > + hpmemsize The fixed amount of bus space which is > + reserved for hotplug bridge's memory window. > + The default value is 2 megabytes. > + hpbussize The fixed amount of bus space which is > + reserved for hotplug bridge's additional bus > + number resources. > + The default value is 0. at lease the patch should be split to two patches 1. one for hpiosize/hpmemsize paramater doc 2. one for new hpbussize but we really should avoid adding those parameters if we can do that automatically. if you have test case, please check if busn_alloc branch would increase the bus range automatically. git://git.kernel.org/pub/scm/linux/kernel/git/yinghai/linux-yinghai.git for-pci-busn-alloc Thanks Yinghai -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Yinghai, Thank you for your comment. On Mon, 2 Jul 2012 13:51:59 -0700 Yinghai Lu <yinghai@kernel.org> wrote: > On Sun, Jul 1, 2012 at 9:49 PM, Taku Izumi <izumi.taku@jp.fujitsu.com> wrote: > > > > Currently I/O ports and I/O memory resources are reserved for > > hotplug bridges and we can tune their size by using hpiosize > > and hpmemsize boot option. > > > > This patch extends feature so that we can reserve additional > > bus number resources for hotplug bridges and tune it by > > using "hpbussize" option. > > > > This patch also adds missing document for "hpiosize" and > > "hpmemsize" option. > > > > Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> > > --- > > Documentation/kernel-parameters.txt | 10 ++++++++++ > > drivers/pci/pci.c | 6 +++++- > > drivers/pci/probe.c | 4 ++++ > > include/linux/pci.h | 1 + > > 4 files changed, 20 insertions(+), 1 deletion(-) > > > > Index: linux/drivers/pci/pci.c > > =================================================================== > > --- linux.orig/drivers/pci/pci.c > > +++ linux/drivers/pci/pci.c > > @@ -74,9 +74,11 @@ unsigned long pci_cardbus_mem_size = DEF > > > > #define DEFAULT_HOTPLUG_IO_SIZE (256) > > #define DEFAULT_HOTPLUG_MEM_SIZE (2*1024*1024) > > -/* pci=hpmemsize=nnM,hpiosize=nn can override this */ > > +#define DEFAULT_HOTPLUG_BUS_SIZE (0) > > +/* pci=hpmemsize=nnM,hpiosize=nn,hpbussize=n can override this */ > > unsigned long pci_hotplug_io_size = DEFAULT_HOTPLUG_IO_SIZE; > > unsigned long pci_hotplug_mem_size = DEFAULT_HOTPLUG_MEM_SIZE; > > +unsigned int pci_hotplug_bus_size = DEFAULT_HOTPLUG_BUS_SIZE; > > > > enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_TUNE_OFF; > > > > @@ -3826,6 +3828,8 @@ static int __init pci_setup(char *str) > > pci_hotplug_io_size = memparse(str + 9, &str); > > } else if (!strncmp(str, "hpmemsize=", 10)) { > > pci_hotplug_mem_size = memparse(str + 10, &str); > > + } else if (!strncmp(str, "hpbussize=", 10)) { > > + pci_hotplug_bus_size = memparse(str + 10, &str); > > } else if (!strncmp(str, "pcie_bus_tune_off", 17)) { > > pcie_bus_config = PCIE_BUS_TUNE_OFF; > > } else if (!strncmp(str, "pcie_bus_safe", 13)) { > > Index: linux/drivers/pci/probe.c > > =================================================================== > > --- linux.orig/drivers/pci/probe.c > > +++ linux/drivers/pci/probe.c > > @@ -865,6 +865,10 @@ int __devinit pci_scan_bridge(struct pci > > /* > > * Set the subordinate bus number to its real value. > > */ > > + if (dev->is_hotplug_bridge) { > > + if (max + pci_hotplug_bus_size < child->busn_res.end) > > + max += pci_hotplug_bus_size; > > + } > > pci_bus_update_busn_res_end(child, max); > > pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, max); > > } > > Index: linux/include/linux/pci.h > > =================================================================== > > --- linux.orig/include/linux/pci.h > > +++ linux/include/linux/pci.h > > @@ -1517,6 +1517,7 @@ extern u8 pci_cache_line_size; > > > > extern unsigned long pci_hotplug_io_size; > > extern unsigned long pci_hotplug_mem_size; > > +extern unsigned int pci_hotplug_bus_size; > > > > /* Architecture specific versions may override these (weak) */ > > int pcibios_add_platform_entries(struct pci_dev *dev); > > Index: linux/Documentation/kernel-parameters.txt > > =================================================================== > > --- linux.orig/Documentation/kernel-parameters.txt > > +++ linux/Documentation/kernel-parameters.txt > > @@ -2138,6 +2138,16 @@ bytes respectively. Such letter suffixes > > cbmemsize=nn[KMG] The fixed amount of bus space which is > > reserved for the CardBus bridge's memory > > window. The default value is 64 megabytes. > > + hpiosize The fixed amount of bus space which is > > + reserved for hotplug bridge's IO window. > > + The default value is 256 bytes. > > + hpmemsize The fixed amount of bus space which is > > + reserved for hotplug bridge's memory window. > > + The default value is 2 megabytes. > > + hpbussize The fixed amount of bus space which is > > + reserved for hotplug bridge's additional bus > > + number resources. > > + The default value is 0. > > at lease the patch should be split to two patches > 1. one for hpiosize/hpmemsize paramater doc > 2. one for new hpbussize I'll sprit this into two parts. > but we really should avoid adding those parameters if we can do that > automatically. I don't think this feature conflicts with your feature. Even if we can reallocate bus number automatically, I'd like to avoid that situation preferably, so I'd like to keep bus number resource for hotplug bridge in advance. Can't you agree with me? > if you have test case, please check if busn_alloc branch would > increase the bus range automatically. > > git://git.kernel.org/pub/scm/linux/kernel/git/yinghai/linux-yinghai.git > for-pci-busn-alloc > > > Thanks > > Yinghai > Best regards, Taku Izumi -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Jul 3, 2012 at 1:33 AM, Taku Izumi <izumi.taku@jp.fujitsu.com> wrote: > > Hi Yinghai, > Thank you for your comment. > > On Mon, 2 Jul 2012 13:51:59 -0700 > Yinghai Lu <yinghai@kernel.org> wrote: > >> On Sun, Jul 1, 2012 at 9:49 PM, Taku Izumi <izumi.taku@jp.fujitsu.com> wrote: >> > >> > Currently I/O ports and I/O memory resources are reserved for >> > hotplug bridges and we can tune their size by using hpiosize >> > and hpmemsize boot option. >> > >> > This patch extends feature so that we can reserve additional >> > bus number resources for hotplug bridges and tune it by >> > using "hpbussize" option. >> > >> > This patch also adds missing document for "hpiosize" and >> > "hpmemsize" option. >> > >> > Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> >> > --- >> > Documentation/kernel-parameters.txt | 10 ++++++++++ >> > drivers/pci/pci.c | 6 +++++- >> > drivers/pci/probe.c | 4 ++++ >> > include/linux/pci.h | 1 + >> > 4 files changed, 20 insertions(+), 1 deletion(-) >> > >> > Index: linux/drivers/pci/pci.c >> > =================================================================== >> > --- linux.orig/drivers/pci/pci.c >> > +++ linux/drivers/pci/pci.c >> > Index: linux/drivers/pci/probe.c >> > =================================================================== >> > --- linux.orig/drivers/pci/probe.c >> > +++ linux/drivers/pci/probe.c >> > @@ -865,6 +865,10 @@ int __devinit pci_scan_bridge(struct pci >> > /* >> > * Set the subordinate bus number to its real value. >> > */ >> > + if (dev->is_hotplug_bridge) { >> > + if (max + pci_hotplug_bus_size < child->busn_res.end) >> > + max += pci_hotplug_bus_size; >> > + } >> > pci_bus_update_busn_res_end(child, max); >> > pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, max); ... > I don't think this feature conflicts with your feature. > Even if we can reallocate bus number automatically, I'd like to > avoid that situation preferably, so I'd like to keep bus number > resource for hotplug bridge in advance. > > Can't you agree with me? > that add may not be safe, before busn_alloc patchset, that busn_res.end should be 0xff. so you add extra bus range that could overlap other bridge. after busn_alloc patchset: /* * Set the subordinate bus number to its real value. */ if (dev->is_hotplug_bridge && child->busn_res.end > max && (max - child->busn_res.start) < HOTPLUG_BRIDGE_RESERVE_BUSNR) max = min_t(int, child->busn_res.start + HOTPLUG_BRIDGE_RESERVE_BUSNR, child->busn_res.end); shrink_size = (int)child->busn_res.end - max; pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, max); pci_bus_update_busn_res_end(child, max); and it will try to shrink less to preserve more space for later usage. now #define HOTPLUG_BRIDGE_RESERVE_BUSNR 8 so I assume that you want that value to be changeable via command line? Thanks Yinghai -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, 3 Jul 2012 11:16:45 -0700 Yinghai Lu <yinghai@kernel.org> wrote: > On Tue, Jul 3, 2012 at 1:33 AM, Taku Izumi <izumi.taku@jp.fujitsu.com> wrote: > > > > Hi Yinghai, > > Thank you for your comment. > > > > On Mon, 2 Jul 2012 13:51:59 -0700 > > Yinghai Lu <yinghai@kernel.org> wrote: > > > >> On Sun, Jul 1, 2012 at 9:49 PM, Taku Izumi <izumi.taku@jp.fujitsu.com> wrote: > >> > > >> > Currently I/O ports and I/O memory resources are reserved for > >> > hotplug bridges and we can tune their size by using hpiosize > >> > and hpmemsize boot option. > >> > > >> > This patch extends feature so that we can reserve additional > >> > bus number resources for hotplug bridges and tune it by > >> > using "hpbussize" option. > >> > > >> > This patch also adds missing document for "hpiosize" and > >> > "hpmemsize" option. > >> > > >> > Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> > >> > --- > >> > Documentation/kernel-parameters.txt | 10 ++++++++++ > >> > drivers/pci/pci.c | 6 +++++- > >> > drivers/pci/probe.c | 4 ++++ > >> > include/linux/pci.h | 1 + > >> > 4 files changed, 20 insertions(+), 1 deletion(-) > >> > > >> > Index: linux/drivers/pci/pci.c > >> > =================================================================== > >> > --- linux.orig/drivers/pci/pci.c > >> > +++ linux/drivers/pci/pci.c > >> > Index: linux/drivers/pci/probe.c > >> > =================================================================== > >> > --- linux.orig/drivers/pci/probe.c > >> > +++ linux/drivers/pci/probe.c > >> > @@ -865,6 +865,10 @@ int __devinit pci_scan_bridge(struct pci > >> > /* > >> > * Set the subordinate bus number to its real value. > >> > */ > >> > + if (dev->is_hotplug_bridge) { > >> > + if (max + pci_hotplug_bus_size < child->busn_res.end) > >> > + max += pci_hotplug_bus_size; > >> > + } > >> > pci_bus_update_busn_res_end(child, max); > >> > pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, max); > ... > > I don't think this feature conflicts with your feature. > > Even if we can reallocate bus number automatically, I'd like to > > avoid that situation preferably, so I'd like to keep bus number > > resource for hotplug bridge in advance. > > > > Can't you agree with me? > > > > that add may not be safe, before busn_alloc patchset, that > busn_res.end should be 0xff. > so you add extra bus range that could overlap other bridge. > > after busn_alloc patchset: > > /* > * Set the subordinate bus number to its real value. > */ > if (dev->is_hotplug_bridge && child->busn_res.end > max && > (max - child->busn_res.start) < HOTPLUG_BRIDGE_RESERVE_BUSNR) > max = min_t(int, child->busn_res.start + > HOTPLUG_BRIDGE_RESERVE_BUSNR, > child->busn_res.end); > shrink_size = (int)child->busn_res.end - max; > pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, max); > pci_bus_update_busn_res_end(child, max); > > and it will try to shrink less to preserve more space for later usage. > now > > #define HOTPLUG_BRIDGE_RESERVE_BUSNR 8 > > so I assume that you want that value to be changeable via command line? Yes. After busn_alloc patchset is merged, "hpbussize" option should work as you said.
Index: linux/drivers/pci/pci.c =================================================================== --- linux.orig/drivers/pci/pci.c +++ linux/drivers/pci/pci.c @@ -74,9 +74,11 @@ unsigned long pci_cardbus_mem_size = DEF #define DEFAULT_HOTPLUG_IO_SIZE (256) #define DEFAULT_HOTPLUG_MEM_SIZE (2*1024*1024) -/* pci=hpmemsize=nnM,hpiosize=nn can override this */ +#define DEFAULT_HOTPLUG_BUS_SIZE (0) +/* pci=hpmemsize=nnM,hpiosize=nn,hpbussize=n can override this */ unsigned long pci_hotplug_io_size = DEFAULT_HOTPLUG_IO_SIZE; unsigned long pci_hotplug_mem_size = DEFAULT_HOTPLUG_MEM_SIZE; +unsigned int pci_hotplug_bus_size = DEFAULT_HOTPLUG_BUS_SIZE; enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_TUNE_OFF; @@ -3826,6 +3828,8 @@ static int __init pci_setup(char *str) pci_hotplug_io_size = memparse(str + 9, &str); } else if (!strncmp(str, "hpmemsize=", 10)) { pci_hotplug_mem_size = memparse(str + 10, &str); + } else if (!strncmp(str, "hpbussize=", 10)) { + pci_hotplug_bus_size = memparse(str + 10, &str); } else if (!strncmp(str, "pcie_bus_tune_off", 17)) { pcie_bus_config = PCIE_BUS_TUNE_OFF; } else if (!strncmp(str, "pcie_bus_safe", 13)) { Index: linux/drivers/pci/probe.c =================================================================== --- linux.orig/drivers/pci/probe.c +++ linux/drivers/pci/probe.c @@ -865,6 +865,10 @@ int __devinit pci_scan_bridge(struct pci /* * Set the subordinate bus number to its real value. */ + if (dev->is_hotplug_bridge) { + if (max + pci_hotplug_bus_size < child->busn_res.end) + max += pci_hotplug_bus_size; + } pci_bus_update_busn_res_end(child, max); pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, max); } Index: linux/include/linux/pci.h =================================================================== --- linux.orig/include/linux/pci.h +++ linux/include/linux/pci.h @@ -1517,6 +1517,7 @@ extern u8 pci_cache_line_size; extern unsigned long pci_hotplug_io_size; extern unsigned long pci_hotplug_mem_size; +extern unsigned int pci_hotplug_bus_size; /* Architecture specific versions may override these (weak) */ int pcibios_add_platform_entries(struct pci_dev *dev); Index: linux/Documentation/kernel-parameters.txt =================================================================== --- linux.orig/Documentation/kernel-parameters.txt +++ linux/Documentation/kernel-parameters.txt @@ -2138,6 +2138,16 @@ bytes respectively. Such letter suffixes cbmemsize=nn[KMG] The fixed amount of bus space which is reserved for the CardBus bridge's memory window. The default value is 64 megabytes. + hpiosize The fixed amount of bus space which is + reserved for hotplug bridge's IO window. + The default value is 256 bytes. + hpmemsize The fixed amount of bus space which is + reserved for hotplug bridge's memory window. + The default value is 2 megabytes. + hpbussize The fixed amount of bus space which is + reserved for hotplug bridge's additional bus + number resources. + The default value is 0. resource_alignment= Format: [<order of align>@][<domain>:]<bus>:<slot>.<func>[; ...]
Currently I/O ports and I/O memory resources are reserved for hotplug bridges and we can tune their size by using hpiosize and hpmemsize boot option. This patch extends feature so that we can reserve additional bus number resources for hotplug bridges and tune it by using "hpbussize" option. This patch also adds missing document for "hpiosize" and "hpmemsize" option. Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> --- Documentation/kernel-parameters.txt | 10 ++++++++++ drivers/pci/pci.c | 6 +++++- drivers/pci/probe.c | 4 ++++ include/linux/pci.h | 1 + 4 files changed, 20 insertions(+), 1 deletion(-) -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html