diff mbox

[1/2] PCI: leave MEM and IO decoding disabled during 64-bit BAR sizing, too

Message ID 20120709182018.18165.98339.stgit@bhelgaas.mtv.corp.google.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Bjorn Helgaas July 9, 2012, 6:20 p.m. UTC
After 253d2e5498, we disable MEM and IO decoding for most devices while we
size 32-bit BARs.  However, we restore the original COMMAND register before
we size the upper 32 bits of 64-bit BARs, so we can still cause a conflict.

This patch waits to restore the original COMMAND register until we're
completely finished sizing the BAR.

Reference: https://lkml.org/lkml/2007/8/25/154
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
 drivers/pci/probe.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)


--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Jacob Pan July 9, 2012, 8:18 p.m. UTC | #1
On Mon, 09 Jul 2012 12:20:18 -0600
Bjorn Helgaas <bhelgaas@google.com> wrote:

> After 253d2e5498, we disable MEM and IO decoding for most devices
> while we size 32-bit BARs.  However, we restore the original COMMAND
> register before we size the upper 32 bits of 64-bit BARs, so we can
> still cause a conflict.
> 
> This patch waits to restore the original COMMAND register until we're
> completely finished sizing the BAR.
agreed.

Thanks,

Jacob
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Olof Johansson Aug. 23, 2012, 7:28 a.m. UTC | #2
Hi,

On Mon, Jul 9, 2012 at 11:20 AM, Bjorn Helgaas <bhelgaas@google.com> wrote:
> After 253d2e5498, we disable MEM and IO decoding for most devices while we
> size 32-bit BARs.  However, we restore the original COMMAND register before
> we size the upper 32 bits of 64-bit BARs, so we can still cause a conflict.
>
> This patch waits to restore the original COMMAND register until we're
> completely finished sizing the BAR.
>
> Reference: https://lkml.org/lkml/2007/8/25/154
> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

This patch causes boot lockup on PA Semi hardware, since it disables
the bar on the UART that is used for console, and it has printks
between the old and the new re-enable location. If I boot with 'debug'
level for printk, I hit this. If I boot with just regular console
args, I don't.

I'm guessing any other platform that uses MMIO-based UART on PCI for
console will have similar issues. I can verify on Chrome OS x86
hardware tomorrow if legacy powerpc isn't important enough to care
about. :-)

I have no proposal for a fix for this. Can you please consider
reverting for 3.6 unless someone has a better idea?


-Olof
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 658ac97..66b3a6f 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -152,9 +152,6 @@  int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 	pci_read_config_dword(dev, pos, &sz);
 	pci_write_config_dword(dev, pos, l);
 
-	if (!dev->mmio_always_on)
-		pci_write_config_word(dev, PCI_COMMAND, orig_cmd);
-
 	/*
 	 * All bits set in sz means the device isn't working properly.
 	 * If the BAR isn't implemented, all bits must be 0.  If it's a
@@ -239,6 +236,9 @@  int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 	}
 
  out:
+	if (!dev->mmio_always_on)
+		pci_write_config_word(dev, PCI_COMMAND, orig_cmd);
+
 	return (res->flags & IORESOURCE_MEM_64) ? 1 : 0;
  fail:
 	res->flags = 0;