| Message ID | 20121115005100.GA6613@google.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
Yes, what you describe appears to be the correct semantics; this would then be the more correct patch. Read-the-email-but-didn't-try-to-test-by: Linas Vepstas <linasvepstas <at> gmail.com> -- Linas On 14 November 2012 18:51, Bjorn Helgaas <bhelgaas@google.com> wrote: > > [+cc Lance, Huang, Hidetoshi, Andrew, Zhang] > > On Sat, Nov 10, 2012 at 07:41:04AM +0000, Pandarathil, Vijaymohan R wrote: > > When an error is detected on a PCIe device which does not have an > > AER-aware driver, prevent AER infrastructure from reporting > > successful error recovery. > > > > This is because the report_error_detected() function that gets > > called in the first phase of recovery process allows forward > > progress even when the driver for the device does not have AER > > capabilities. It seems that all callbacks (in pci_error_handlers > > structure) registered by drivers that gets called during error > > recovery are not mandatory. So the intention of the infrastructure > > design seems to be to allow forward progress even when a specific > > callback has not been registered by a driver. However, if error > > handler structure itself has not been registered, it doesn't make > > sense to allow forward progress. > > > > As a result of the current design, in the case of a single device > > having an AER-unaware driver or in the case of any function in a > > multi-function card having an AER-unaware driver, a successful > > recovery is reported. > > > > Typical scenario this happens is when a PCI device is detached > > from a KVM host and the pci-stub driver on the host claims the > > device. The pci-stub driver does not have error handling capabilities > > but the AER infrastructure still reports that the device recovered > > successfully. > > > > The changes proposed here leaves the device in an unrecovered state > > if the driver for the device or for any function in a multi-function > > card does not have error handler structure registered. This reflects > > the true state of the device and prevents any partial recovery (or no > > recovery at all) reported as successful. > > > > Please also see comments from Linas Vepstas at the following link > > http://www.spinics.net/lists/linux-pci/msg18572.html > > > > Reviewed-by: Linas Vepstas <linasvepstas <at> gmail.com> > > Reviewed-by: Myron Stowe <mstowe <at> redhat.com> > > Signed-off-by: Vijay Mohan Pandarathil <vijaymohan.pandarathil <at> hp.com> > > > > --- > > > > drivers/pci/pcie/aer/aerdrv_core.c | 6 ++++++ > > 1 file changed, 6 insertions(+) > > > > diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c > > index 06bad96..030b229 100644 > > --- a/drivers/pci/pcie/aer/aerdrv_core.c > > +++ b/drivers/pci/pcie/aer/aerdrv_core.c > > @@ -215,6 +215,12 @@ static int report_error_detected(struct pci_dev *dev, void *data) > > > > dev->error_state = result_data->state; > > > > + if ((!dev->driver || !dev->driver->err_handler) && > > + !(dev->hdr_type & PCI_HEADER_TYPE_BRIDGE)) { > > + dev_info(&dev->dev, "AER: Error detected but no driver has claimed this device or the driver is AER-unaware\n"); > > + result_data->result = PCI_ERS_RESULT_NONE; > > + return 1; > > This doesn't seem right because returning 1 here causes pci_walk_bus() > to terminate, which means we won't set dev->error_state or notify > drivers for any devices we haven't visited yet. > > > + } > > if (!dev->driver || > > !dev->driver->err_handler || > > !dev->driver->err_handler->error_detected) { > > If none of the drivers in the affected hierarchy supports error handling, > I think the call tree looks like this: > > do_recovery # uncorrectable only > broadcast_error_message(dev, ..., report_error_detected) > result_data.result = CAN_RECOVER > pci_walk_bus(..., report_error_detected) > report_error_detected # (each dev in subtree) > return 0 # no change to result > return result_data.result > broadcast_error_message(dev, ..., report_mmio_enabled) > result_data.result = PCI_ERS_RESULT_RECOVERED > pci_walk_bus(..., report_mmio_enabled) > report_mmio_enabled # (each dev in subtree) > return 0 # no change to result > dev_info("recovery successful") > > Specifically, there are no error_handler functions, so we never change > result_data.result, and the default is that we treat the error as > "recovered successfully." That seems broken. An uncorrectable error > is by definition recoverable only by device-specific software, i.e., > the driver. We didn't call any drivers, so we can't have recovered > anything. > > What do you think of the following alternative? I don't know why you > checked for bridge devices in your patch, so I don't know whether > that's important here or not. > > diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c > index 06bad96..a109c68 100644 > --- a/drivers/pci/pcie/aer/aerdrv_core.c > +++ b/drivers/pci/pcie/aer/aerdrv_core.c > @@ -231,11 +231,11 @@ static int report_error_detected(struct pci_dev *dev, void *data) > dev->driver ? > "no AER-aware driver" : "no driver"); > } > - return 0; > + vote = PCI_ERS_RESULT_DISCONNECT; > + } else { > + err_handler = dev->driver->err_handler; > + vote = err_handler->error_detected(dev, result_data->state); > } > - > - err_handler = dev->driver->err_handler; > - vote = err_handler->error_detected(dev, result_data->state); > result_data->result = merge_result(result_data->result, vote); > return 0; > } -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c index 06bad96..a109c68 100644 --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -231,11 +231,11 @@ static int report_error_detected(struct pci_dev *dev, void *data) dev->driver ? "no AER-aware driver" : "no driver"); } - return 0; + vote = PCI_ERS_RESULT_DISCONNECT; + } else { + err_handler = dev->driver->err_handler; + vote = err_handler->error_detected(dev, result_data->state); } - - err_handler = dev->driver->err_handler; - vote = err_handler->error_detected(dev, result_data->state); result_data->result = merge_result(result_data->result, vote); return 0; }