@@ -49,21 +49,17 @@ depends on CONFIG_PCIEPORTBUS, so pls. set CONFIG_PCIEPORTBUS=y and
CONFIG_PCIEAER = y.
2.2 Load PCI Express AER Root Driver
-There is a case where a system has AER support in BIOS. Enabling the AER
-Root driver and having AER support in BIOS may result unpredictable
-behavior. To avoid this conflict, a successful load of the AER Root driver
-requires ACPI _OSC support in the BIOS to allow the AER Root driver to
-request for native control of AER. See the PCI FW 3.0 Specification for
-details regarding OSC usage. Currently, lots of firmwares don't provide
-_OSC support while they use PCI Express. To support such firmwares,
-forceload, a parameter of type bool, could enable AER to continue to
-be initiated although firmwares have no _OSC support. To enable the
-walkaround, pls. add aerdriver.forceload=y to kernel boot parameter line
-when booting kernel. Note that forceload=n by default.
+
+Some systems have AER support in firmware. Enabling Linux AER support at
+the same time the firmware handles AER may result in unpredictable
+behavior. Therefore, Linux does not handle AER events unless the firmware
+grants AER control to the OS via the ACPI _OSC method. See the PCI FW 3.0
+Specification for details regarding _OSC usage.
2.3 AER error output
-When a PCI-E AER error is captured, an error message will be outputted to
-console. If it's a correctable error, it is outputted as a warning.
+
+When a PCIe AER error is captured, an error message will be output to
+console. If it's a correctable error, it is output as a warning.
Otherwise, it is printed as an error. So users could choose different
log level to filter out correctable error messages.
@@ -70,7 +70,7 @@ static int pcie_aer_disable;
void pci_no_aer(void)
{
- pcie_aer_disable = 1; /* has priority over 'forceload' */
+ pcie_aer_disable = 1;
}
bool pci_aer_available(void)
@@ -304,11 +304,6 @@ static int aer_probe(struct pcie_device *dev)
struct aer_rpc *rpc;
struct device *device = &dev->device;
- /* Init */
- status = aer_init(dev);
- if (status)
- return status;
-
/* Alloc rpc data structure */
rpc = aer_alloc_rpc(dev);
if (!rpc) {
@@ -105,7 +105,6 @@ static inline pci_ers_result_t merge_result(enum pci_ers_result orig,
}
extern struct bus_type pcie_port_bus_type;
-int aer_init(struct pcie_device *dev);
void aer_isr(struct work_struct *work);
void aer_print_error(struct pci_dev *dev, struct aer_err_info *info);
void aer_print_port_info(struct pci_dev *dev, struct aer_err_info *info);
@@ -121,11 +120,4 @@ static inline int pcie_aer_get_firmware_first(struct pci_dev *pci_dev)
return 0;
}
#endif
-
-static inline void pcie_aer_force_firmware_first(struct pci_dev *pci_dev,
- int enable)
-{
- pci_dev->__aer_firmware_first = !!enable;
- pci_dev->__aer_firmware_first_valid = 1;
-}
#endif /* _AERDRV_H_ */
@@ -27,9 +27,6 @@
#include <linux/kfifo.h>
#include "aerdrv.h"
-static bool forceload;
-module_param(forceload, bool, 0);
-
#define PCI_EXP_AER_FLAGS (PCI_EXP_DEVCTL_CERE | PCI_EXP_DEVCTL_NFERE | \
PCI_EXP_DEVCTL_FERE | PCI_EXP_DEVCTL_URRE)
@@ -811,19 +808,3 @@ void aer_isr(struct work_struct *work)
aer_isr_one_error(p_device, &e_src);
mutex_unlock(&rpc->rpc_mutex);
}
-
-/**
- * aer_init - provide AER initialization
- * @dev: pointer to AER pcie device
- *
- * Invoked when AER service driver is loaded.
- */
-int aer_init(struct pcie_device *dev)
-{
- if (forceload) {
- dev_printk(KERN_DEBUG, &dev->device,
- "aerdrv forceload requested.\n");
- pcie_aer_force_firmware_first(dev->port, 0);
- }
- return 0;
-}
Per the PCI Firmware spec, r3.0, sec 4.5.1, on ACPI systems, the OS must not use AER unless _OSC is present and _OSC grants AER control to the OS. The aerdriver.forceload kernel parameter was a way to enable Linux AER support on ACPI systems that lack _OSC or fail to grant control the the OS. Enabling Linux AER support when the firmware doesn't want us to is a recipe for problems, e.g., the firmware might be handling AER itself. Remove the aerdriver.forceload kernel parameter and related supporting code. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> --- Documentation/PCI/pcieaer-howto.txt | 22 +++++++++------------- drivers/pci/pcie/aer/aerdrv.c | 7 +------ drivers/pci/pcie/aer/aerdrv.h | 8 -------- drivers/pci/pcie/aer/aerdrv_core.c | 19 ------------------- 4 files changed, 10 insertions(+), 46 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html