| Message ID | 20160909142343.13314-7-lorenzo.pieralisi@arm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
On 09/09/16 15:23, Lorenzo Pieralisi wrote: > On DT based systems, the of_dma_configure() API implements DMA > configuration for a given device. On ACPI systems an API equivalent to > of_dma_configure() is missing which implies that it is currently not > possible to set-up DMA operations for devices through the ACPI generic > kernel layer. > > This patch fills the gap by introducing acpi_dma_configure/deconfigure() > calls that for now are just wrappers around arch_setup_dma_ops() and > arch_teardown_dma_ops() and also updates ACPI and PCI core code to use > the newly introduced acpi_dma_configure/acpi_dma_deconfigure functions. > > The DMA range size passed to arch_setup_dma_ops() is sized according > to the device coherent_dma_mask (starting at address 0x0), mirroring the > DT probing path behaviour when a dma-ranges property is not provided > for the device being probed; this changes the current arch_setup_dma_ops() > call parameters in the ACPI probing case, but since arch_setup_dma_ops() > is a NOP on all architectures but ARM/ARM64 this patch does not change > the current kernel behaviour on them. > > Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > Acked-by: Bjorn Helgaas <bhelgaas@google.com> [pci] > Cc: Bjorn Helgaas <bhelgaas@google.com> > Cc: Robin Murphy <robin.murphy@arm.com> > Cc: Tomasz Nowicki <tn@semihalf.com> > Cc: Joerg Roedel <joro@8bytes.org> > Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> > --- > drivers/acpi/glue.c | 4 ++-- > drivers/acpi/scan.c | 24 ++++++++++++++++++++++++ > drivers/pci/probe.c | 3 +-- > include/acpi/acpi_bus.h | 2 ++ > include/linux/acpi.h | 5 +++++ > 5 files changed, 34 insertions(+), 4 deletions(-) > > diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c > index 5ea5dc2..f8d6564 100644 > --- a/drivers/acpi/glue.c > +++ b/drivers/acpi/glue.c > @@ -227,8 +227,7 @@ int acpi_bind_one(struct device *dev, struct acpi_device *acpi_dev) > > attr = acpi_get_dma_attr(acpi_dev); > if (attr != DEV_DMA_NOT_SUPPORTED) > - arch_setup_dma_ops(dev, 0, 0, NULL, > - attr == DEV_DMA_COHERENT); > + acpi_dma_configure(dev, attr); > > acpi_physnode_link_name(physical_node_name, node_id); > retval = sysfs_create_link(&acpi_dev->dev.kobj, &dev->kobj, > @@ -251,6 +250,7 @@ int acpi_bind_one(struct device *dev, struct acpi_device *acpi_dev) > return 0; > > err: > + acpi_dma_deconfigure(dev); > ACPI_COMPANION_SET(dev, NULL); > put_device(dev); > put_device(&acpi_dev->dev); > diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c > index e878fc7..9614232 100644 > --- a/drivers/acpi/scan.c > +++ b/drivers/acpi/scan.c > @@ -1370,6 +1370,30 @@ enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev) > return DEV_DMA_NON_COHERENT; > } > > +/** > + * acpi_dma_configure - Set-up DMA configuration for the device. > + * @dev: The pointer to the device > + * @attr: device dma attributes > + */ > +void acpi_dma_configure(struct device *dev, enum dev_dma_attr attr) > +{ > + /* > + * Assume dma valid range starts at 0 and covers the whole > + * coherent_dma_mask. > + */ > + arch_setup_dma_ops(dev, 0, dev->coherent_dma_mask + 1, NULL, > + attr == DEV_DMA_COHERENT); This looks a bit hairy - if we're setting up the DMA configuration at this point can we really always rely on the device already having a valid DMA mask? I think it would make sense to at least check, and apply the standard default 32-bit mask if not. > +} > + > +/** > + * acpi_dma_deconfigure - Tear-down DMA configuration for the device. > + * @dev: The pointer to the device > + */ > +void acpi_dma_deconfigure(struct device *dev) > +{ > + arch_teardown_dma_ops(dev); > +} As touched upon in the dwc-usb3 thread, is it worth exporting these for the benefit of modular bus/glue code, to match of_dma_configure()? > + > static void acpi_init_coherency(struct acpi_device *adev) > { > unsigned long long cca = 0; > diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c > index 93f280d..e96d482 100644 > --- a/drivers/pci/probe.c > +++ b/drivers/pci/probe.c > @@ -1734,8 +1734,7 @@ static void pci_dma_configure(struct pci_dev *dev) > if (attr == DEV_DMA_NOT_SUPPORTED) > dev_warn(&dev->dev, "DMA not supported.\n"); > else > - arch_setup_dma_ops(&dev->dev, 0, 0, NULL, > - attr == DEV_DMA_COHERENT); > + acpi_dma_configure(&dev->dev, attr); > } What about non-PCI stuff? I see there's at least an acpi_create_platform_device() which I'd also kind of expect to see as a caller (which indeed might also tie in with the aforementioned default mask initialisation). Robin. > > pci_put_host_bridge_device(bridge); > diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h > index c1a524d..4242c31 100644 > --- a/include/acpi/acpi_bus.h > +++ b/include/acpi/acpi_bus.h > @@ -573,6 +573,8 @@ struct acpi_pci_root { > > bool acpi_dma_supported(struct acpi_device *adev); > enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev); > +void acpi_dma_configure(struct device *dev, enum dev_dma_attr attr); > +void acpi_dma_deconfigure(struct device *dev); > > struct acpi_device *acpi_find_child_device(struct acpi_device *parent, > u64 address, bool check_children); > diff --git a/include/linux/acpi.h b/include/linux/acpi.h > index c5eaf2f..05d4e48 100644 > --- a/include/linux/acpi.h > +++ b/include/linux/acpi.h > @@ -729,6 +729,11 @@ static inline enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev) > return DEV_DMA_NOT_SUPPORTED; > } > > +static inline void acpi_dma_configure(struct device *dev, > + enum dev_dma_attr attr) { } > + > +static inline void acpi_dma_deconfigure(struct device *dev) { } > + > #define ACPI_PTR(_ptr) (NULL) > > static inline void acpi_device_set_enumerated(struct acpi_device *adev) > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Sep 13, 2016 at 03:41:06PM +0100, Robin Murphy wrote: > On 09/09/16 15:23, Lorenzo Pieralisi wrote: > > On DT based systems, the of_dma_configure() API implements DMA > > configuration for a given device. On ACPI systems an API equivalent to > > of_dma_configure() is missing which implies that it is currently not > > possible to set-up DMA operations for devices through the ACPI generic > > kernel layer. > > > > This patch fills the gap by introducing acpi_dma_configure/deconfigure() > > calls that for now are just wrappers around arch_setup_dma_ops() and > > arch_teardown_dma_ops() and also updates ACPI and PCI core code to use > > the newly introduced acpi_dma_configure/acpi_dma_deconfigure functions. > > > > The DMA range size passed to arch_setup_dma_ops() is sized according > > to the device coherent_dma_mask (starting at address 0x0), mirroring the > > DT probing path behaviour when a dma-ranges property is not provided > > for the device being probed; this changes the current arch_setup_dma_ops() > > call parameters in the ACPI probing case, but since arch_setup_dma_ops() > > is a NOP on all architectures but ARM/ARM64 this patch does not change > > the current kernel behaviour on them. > > > > Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > > Acked-by: Bjorn Helgaas <bhelgaas@google.com> [pci] > > Cc: Bjorn Helgaas <bhelgaas@google.com> > > Cc: Robin Murphy <robin.murphy@arm.com> > > Cc: Tomasz Nowicki <tn@semihalf.com> > > Cc: Joerg Roedel <joro@8bytes.org> > > Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> > > --- > > drivers/acpi/glue.c | 4 ++-- > > drivers/acpi/scan.c | 24 ++++++++++++++++++++++++ > > drivers/pci/probe.c | 3 +-- > > include/acpi/acpi_bus.h | 2 ++ > > include/linux/acpi.h | 5 +++++ > > 5 files changed, 34 insertions(+), 4 deletions(-) > > > > diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c > > index 5ea5dc2..f8d6564 100644 > > --- a/drivers/acpi/glue.c > > +++ b/drivers/acpi/glue.c > > @@ -227,8 +227,7 @@ int acpi_bind_one(struct device *dev, struct acpi_device *acpi_dev) > > > > attr = acpi_get_dma_attr(acpi_dev); > > if (attr != DEV_DMA_NOT_SUPPORTED) > > - arch_setup_dma_ops(dev, 0, 0, NULL, > > - attr == DEV_DMA_COHERENT); > > + acpi_dma_configure(dev, attr); Here's the call for non-PCI devices ;-) > > acpi_physnode_link_name(physical_node_name, node_id); > > retval = sysfs_create_link(&acpi_dev->dev.kobj, &dev->kobj, > > @@ -251,6 +250,7 @@ int acpi_bind_one(struct device *dev, struct acpi_device *acpi_dev) > > return 0; > > > > err: > > + acpi_dma_deconfigure(dev); > > ACPI_COMPANION_SET(dev, NULL); > > put_device(dev); > > put_device(&acpi_dev->dev); > > diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c > > index e878fc7..9614232 100644 > > --- a/drivers/acpi/scan.c > > +++ b/drivers/acpi/scan.c > > @@ -1370,6 +1370,30 @@ enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev) > > return DEV_DMA_NON_COHERENT; > > } > > > > +/** > > + * acpi_dma_configure - Set-up DMA configuration for the device. > > + * @dev: The pointer to the device > > + * @attr: device dma attributes > > + */ > > +void acpi_dma_configure(struct device *dev, enum dev_dma_attr attr) > > +{ > > + /* > > + * Assume dma valid range starts at 0 and covers the whole > > + * coherent_dma_mask. > > + */ > > + arch_setup_dma_ops(dev, 0, dev->coherent_dma_mask + 1, NULL, > > + attr == DEV_DMA_COHERENT); > > This looks a bit hairy - if we're setting up the DMA configuration at > this point can we really always rely on the device already having a > valid DMA mask? I think it would make sense to at least check, and apply > the standard default 32-bit mask if not. That's a good point, but we would be changing the x86/IA64 probing path if we do what you suggest; so I think you are right and it should be a safe change to make but I still need to make sure we do not break anything in the process. > > +} > > + > > +/** > > + * acpi_dma_deconfigure - Tear-down DMA configuration for the device. > > + * @dev: The pointer to the device > > + */ > > +void acpi_dma_deconfigure(struct device *dev) > > +{ > > + arch_teardown_dma_ops(dev); > > +} > > As touched upon in the dwc-usb3 thread, is it worth exporting these for > the benefit of modular bus/glue code, to match of_dma_configure()? I think yes, I will do. > > static void acpi_init_coherency(struct acpi_device *adev) > > { > > unsigned long long cca = 0; > > diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c > > index 93f280d..e96d482 100644 > > --- a/drivers/pci/probe.c > > +++ b/drivers/pci/probe.c > > @@ -1734,8 +1734,7 @@ static void pci_dma_configure(struct pci_dev *dev) > > if (attr == DEV_DMA_NOT_SUPPORTED) > > dev_warn(&dev->dev, "DMA not supported.\n"); > > else > > - arch_setup_dma_ops(&dev->dev, 0, 0, NULL, > > - attr == DEV_DMA_COHERENT); > > + acpi_dma_configure(&dev->dev, attr); > > } > > What about non-PCI stuff? I see there's at least an > acpi_create_platform_device() which I'd also kind of expect to see as a > caller (which indeed might also tie in with the aforementioned default > mask initialisation). See above (acpi_bind_one()). Thanks for having a look, Lorenzo > > Robin. > > > > > pci_put_host_bridge_device(bridge); > > diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h > > index c1a524d..4242c31 100644 > > --- a/include/acpi/acpi_bus.h > > +++ b/include/acpi/acpi_bus.h > > @@ -573,6 +573,8 @@ struct acpi_pci_root { > > > > bool acpi_dma_supported(struct acpi_device *adev); > > enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev); > > +void acpi_dma_configure(struct device *dev, enum dev_dma_attr attr); > > +void acpi_dma_deconfigure(struct device *dev); > > > > struct acpi_device *acpi_find_child_device(struct acpi_device *parent, > > u64 address, bool check_children); > > diff --git a/include/linux/acpi.h b/include/linux/acpi.h > > index c5eaf2f..05d4e48 100644 > > --- a/include/linux/acpi.h > > +++ b/include/linux/acpi.h > > @@ -729,6 +729,11 @@ static inline enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev) > > return DEV_DMA_NOT_SUPPORTED; > > } > > > > +static inline void acpi_dma_configure(struct device *dev, > > + enum dev_dma_attr attr) { } > > + > > +static inline void acpi_dma_deconfigure(struct device *dev) { } > > + > > #define ACPI_PTR(_ptr) (NULL) > > > > static inline void acpi_device_set_enumerated(struct acpi_device *adev) > > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-acpi" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c index 5ea5dc2..f8d6564 100644 --- a/drivers/acpi/glue.c +++ b/drivers/acpi/glue.c @@ -227,8 +227,7 @@ int acpi_bind_one(struct device *dev, struct acpi_device *acpi_dev) attr = acpi_get_dma_attr(acpi_dev); if (attr != DEV_DMA_NOT_SUPPORTED) - arch_setup_dma_ops(dev, 0, 0, NULL, - attr == DEV_DMA_COHERENT); + acpi_dma_configure(dev, attr); acpi_physnode_link_name(physical_node_name, node_id); retval = sysfs_create_link(&acpi_dev->dev.kobj, &dev->kobj, @@ -251,6 +250,7 @@ int acpi_bind_one(struct device *dev, struct acpi_device *acpi_dev) return 0; err: + acpi_dma_deconfigure(dev); ACPI_COMPANION_SET(dev, NULL); put_device(dev); put_device(&acpi_dev->dev); diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index e878fc7..9614232 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -1370,6 +1370,30 @@ enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev) return DEV_DMA_NON_COHERENT; } +/** + * acpi_dma_configure - Set-up DMA configuration for the device. + * @dev: The pointer to the device + * @attr: device dma attributes + */ +void acpi_dma_configure(struct device *dev, enum dev_dma_attr attr) +{ + /* + * Assume dma valid range starts at 0 and covers the whole + * coherent_dma_mask. + */ + arch_setup_dma_ops(dev, 0, dev->coherent_dma_mask + 1, NULL, + attr == DEV_DMA_COHERENT); +} + +/** + * acpi_dma_deconfigure - Tear-down DMA configuration for the device. + * @dev: The pointer to the device + */ +void acpi_dma_deconfigure(struct device *dev) +{ + arch_teardown_dma_ops(dev); +} + static void acpi_init_coherency(struct acpi_device *adev) { unsigned long long cca = 0; diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 93f280d..e96d482 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -1734,8 +1734,7 @@ static void pci_dma_configure(struct pci_dev *dev) if (attr == DEV_DMA_NOT_SUPPORTED) dev_warn(&dev->dev, "DMA not supported.\n"); else - arch_setup_dma_ops(&dev->dev, 0, 0, NULL, - attr == DEV_DMA_COHERENT); + acpi_dma_configure(&dev->dev, attr); } pci_put_host_bridge_device(bridge); diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index c1a524d..4242c31 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -573,6 +573,8 @@ struct acpi_pci_root { bool acpi_dma_supported(struct acpi_device *adev); enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev); +void acpi_dma_configure(struct device *dev, enum dev_dma_attr attr); +void acpi_dma_deconfigure(struct device *dev); struct acpi_device *acpi_find_child_device(struct acpi_device *parent, u64 address, bool check_children); diff --git a/include/linux/acpi.h b/include/linux/acpi.h index c5eaf2f..05d4e48 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -729,6 +729,11 @@ static inline enum dev_dma_attr acpi_get_dma_attr(struct acpi_device *adev) return DEV_DMA_NOT_SUPPORTED; } +static inline void acpi_dma_configure(struct device *dev, + enum dev_dma_attr attr) { } + +static inline void acpi_dma_deconfigure(struct device *dev) { } + #define ACPI_PTR(_ptr) (NULL) static inline void acpi_device_set_enumerated(struct acpi_device *adev)