diff mbox

Bad DT binding (hisi-pcie-almost-ecam)

Message ID 20170313104356.GA23239@leverpostej (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Mark Rutland March 13, 2017, 10:44 a.m. UTC
Hi,

On Mon, Mar 13, 2017 at 08:14:19AM +0000, Gabriele Paoloni wrote:
> > -----Original Message-----
> > From: Mark Rutland [mailto:mark.rutland@arm.com]

> > The commit adds the "hisilicon,pcie-almost-ecam", which goes against
> > the
> > usual DT conventions, and is non-sensical in that it describes the IP
> > based on what it isn't.
> > 
> > This binding shouldn't have gone in as-is, and we should fix it before
> > v4.11.
> > 
> > The binding states that this IP is found in Hip06 and Hip07. For these
> > cases we'd usually take the name of the first implementation, e.g.
> > something like "hisilicon,hip06-pcie", which can be used as a fallback
> > in the compatible list if reused in subsequent SoC generations.
> > 
> > I also see that "hisilicon,hip06-pcie" already exists, so I'm even more
> > suspicious.
> 
> For Hip06 the IP is the same but in we have a different BIOS configuration
> that allows the controller be ECAM compliant for all the devices of the
> hierarchy except the RC.
> 
> > What exactly is the "hisilicon,pcie-almost-ecam" binding trying to
> > describe? Is it a different IP also found on Hip06, or is it a new
> > binding for the same IP?
> 
> The reason why we need this new BIOS is to support the recent PCIe quirks
> for the ACPI Root Port driver (commit 5b69b85ba1ddd36be01f5c57830b37a3c8256009
> "PCI/ACPI: Check for platform-specific MCFG quirks"). So using one BIOS we
> support both DT and ACPI.
> This is the reason why you see Hip-06 being already there...

Ok. Thanks for clarifying that.

What I think we should do is:

a) Update the binding document to clarify when these strings are used.

b) Use an SoC prefix in the string. I'm happy to have both hip06 and hip07
   strings.

c) Drop the "almost", since we don't use that elsewhere. (e.g. for
   cavium,pci-host-thunder-ecam"

Would you be happy with the below?

Thanks,
Mark.

---->8----

Comments

Gabriele Paoloni March 13, 2017, 1:09 p.m. UTC | #1
Hi Mark

> -----Original Message-----
> From: Mark Rutland [mailto:mark.rutland@arm.com]
> Sent: 13 March 2017 10:44
> To: Gabriele Paoloni
> Cc: liudongdong (C); Bjorn Helgaas; Wangzhou (B);
> devicetree@vger.kernel.org; linux-pci@vger.kernel.org; linux-
> kernel@vger.kernel.org
> Subject: Re: Bad DT binding (hisi-pcie-almost-ecam)
> 
> Hi,
> 
> On Mon, Mar 13, 2017 at 08:14:19AM +0000, Gabriele Paoloni wrote:
> > > -----Original Message-----
> > > From: Mark Rutland [mailto:mark.rutland@arm.com]
> 
> > > The commit adds the "hisilicon,pcie-almost-ecam", which goes
> against
> > > the
> > > usual DT conventions, and is non-sensical in that it describes the
> IP
> > > based on what it isn't.
> > >
> > > This binding shouldn't have gone in as-is, and we should fix it
> before
> > > v4.11.
> > >
> > > The binding states that this IP is found in Hip06 and Hip07. For
> these
> > > cases we'd usually take the name of the first implementation, e.g.
> > > something like "hisilicon,hip06-pcie", which can be used as a
> fallback
> > > in the compatible list if reused in subsequent SoC generations.
> > >
> > > I also see that "hisilicon,hip06-pcie" already exists, so I'm even
> more
> > > suspicious.
> >
> > For Hip06 the IP is the same but in we have a different BIOS
> configuration
> > that allows the controller be ECAM compliant for all the devices of
> the
> > hierarchy except the RC.
> >
> > > What exactly is the "hisilicon,pcie-almost-ecam" binding trying to
> > > describe? Is it a different IP also found on Hip06, or is it a new
> > > binding for the same IP?
> >
> > The reason why we need this new BIOS is to support the recent PCIe
> quirks
> > for the ACPI Root Port driver (commit
> 5b69b85ba1ddd36be01f5c57830b37a3c8256009
> > "PCI/ACPI: Check for platform-specific MCFG quirks"). So using one
> BIOS we
> > support both DT and ACPI.
> > This is the reason why you see Hip-06 being already there...
> 
> Ok. Thanks for clarifying that.
> 
> What I think we should do is:
> 
> a) Update the binding document to clarify when these strings are used.
> 
> b) Use an SoC prefix in the string. I'm happy to have both hip06 and
> hip07
>    strings.
> 
> c) Drop the "almost", since we don't use that elsewhere. (e.g. for
>    cavium,pci-host-thunder-ecam"
> 
> Would you be happy with the below?

Yes indeed it would work for us.

We could discuss about the appropriateness of ecam vs almost-ecam,
but I don't think it is of much value as long as we make the meaning
clear in the Documentation

We'll send the fix below to lists in a separate patch...

Many Thanks
Gab

> 
> Thanks,
> Mark.
> 
> ---->8----
> diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
> b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
> index b7fa3b9..535426d 100644
> --- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
> @@ -44,13 +44,19 @@ Hip05 Example (note that Hip06 is the same except
> compatible):
>         };
> 
>  HiSilicon Hip06/Hip07 PCIe host bridge DT (almost-ECAM) description.
> +
> +Some BIOSes place the host controller in a mode where it is ECAM
> compliant for
> +all devices other than the root complex. In such cases, the host
> controller
> +should be described as below.
> +
>  The properties and their meanings are identical to those described in
>  host-generic-pci.txt except as listed below.
> 
>  Properties of the host controller node that differ from
>  host-generic-pci.txt:
> 
> -- compatible     : Must be "hisilicon,pcie-almost-ecam"
> +- compatible     : Must be "hisilicon,hip06-pcie-ecam", or
> +                   "hisilicon,hip07-pcie-ecam"
> 
>  - reg            : Two entries: First the ECAM configuration space for
> any
>                    other bus underneath the root bus. Second, the base
> @@ -59,7 +65,7 @@ host-generic-pci.txt:
> 
>  Example:
>         pcie0: pcie@a0090000 {
> -               compatible = "hisilicon,pcie-almost-ecam";
> +               compatible = "hisilicon,hip06-pcie-ecam";
>                 reg = <0 0xb0000000 0 0x2000000>,  /*  ECAM
> configuration space */
>                       <0 0xa0090000 0 0x10000>; /* host bridge
> registers */
>                 bus-range = <0  31>;
> diff --git a/drivers/pci/dwc/pcie-hisi.c b/drivers/pci/dwc/pcie-hisi.c
> index fd66a31..bd5b1b4 100644
> --- a/drivers/pci/dwc/pcie-hisi.c
> +++ b/drivers/pci/dwc/pcie-hisi.c
> @@ -380,7 +380,11 @@ struct pci_ecam_ops hisi_pcie_platform_ops = {
> 
>  static const struct of_device_id hisi_pcie_almost_ecam_of_match[] = {
>         {
> -               .compatible = "hisilicon,pcie-almost-ecam",
> +               .compatible = "hisilicon,hip06-pcie-ecam",
> +               .data       = (void *) &hisi_pcie_platform_ops,
> +       },
> +       {
> +               .compatible = "hisilicon,hip07-pcie-ecam",
>                 .data       = (void *) &hisi_pcie_platform_ops,
>         },
>         {},
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
index b7fa3b9..535426d 100644
--- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
@@ -44,13 +44,19 @@  Hip05 Example (note that Hip06 is the same except compatible):
        };
 
 HiSilicon Hip06/Hip07 PCIe host bridge DT (almost-ECAM) description.
+
+Some BIOSes place the host controller in a mode where it is ECAM compliant for
+all devices other than the root complex. In such cases, the host controller
+should be described as below.
+
 The properties and their meanings are identical to those described in
 host-generic-pci.txt except as listed below.
 
 Properties of the host controller node that differ from
 host-generic-pci.txt:
 
-- compatible     : Must be "hisilicon,pcie-almost-ecam"
+- compatible     : Must be "hisilicon,hip06-pcie-ecam", or
+                   "hisilicon,hip07-pcie-ecam"
 
 - reg            : Two entries: First the ECAM configuration space for any
                   other bus underneath the root bus. Second, the base
@@ -59,7 +65,7 @@  host-generic-pci.txt:
 
 Example:
        pcie0: pcie@a0090000 {
-               compatible = "hisilicon,pcie-almost-ecam";
+               compatible = "hisilicon,hip06-pcie-ecam";
                reg = <0 0xb0000000 0 0x2000000>,  /*  ECAM configuration space */
                      <0 0xa0090000 0 0x10000>; /* host bridge registers */
                bus-range = <0  31>;
diff --git a/drivers/pci/dwc/pcie-hisi.c b/drivers/pci/dwc/pcie-hisi.c
index fd66a31..bd5b1b4 100644
--- a/drivers/pci/dwc/pcie-hisi.c
+++ b/drivers/pci/dwc/pcie-hisi.c
@@ -380,7 +380,11 @@  struct pci_ecam_ops hisi_pcie_platform_ops = {
 
 static const struct of_device_id hisi_pcie_almost_ecam_of_match[] = {
        {
-               .compatible = "hisilicon,pcie-almost-ecam",
+               .compatible = "hisilicon,hip06-pcie-ecam",
+               .data       = (void *) &hisi_pcie_platform_ops,
+       },
+       {
+               .compatible = "hisilicon,hip07-pcie-ecam",
                .data       = (void *) &hisi_pcie_platform_ops,
        },
        {},