Message ID | 20171027072612.26565-8-jeffy.chen@rock-chips.com (mailing list archive) |
---|---|
State | New, archived |
Delegated to: | Bjorn Helgaas |
Headers | show |
Hi Jeffy, On Fri, Oct 27, 2017 at 03:26:12PM +0800, Jeffy Chen wrote: > Add pci-of.c to handle the PCIe WAKE# interrupt. > > Also use the dedicated wakeirq infrastructure to simplify it. > > Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> > --- > > Changes in v10: > Use device_set_wakeup_capable() instead of device_set_wakeup_enable(), > since dedicated wakeirq will be lost in device_set_wakeup_enable(false). > > Changes in v9: > Fix check error in .cleanup(). > Move dedicated wakeirq setup to setup() callback and use > device_set_wakeup_enable() to enable/disable. > > Changes in v8: > Add pci-of.c and use platform_pm_ops to handle the PCIe WAKE# signal. > > Changes in v7: > Move PCIE_WAKE handling into pci core. > > Changes in v6: > Fix device_init_wake error handling, and add some comments. > > Changes in v5: > Rebase. > > Changes in v3: > Fix error handling. > > Changes in v2: > Use dev_pm_set_dedicated_wake_irq. > > drivers/pci/Makefile | 2 +- > drivers/pci/pci-of.c | 127 +++++++++++++++++++++++++++++++++++++++++++++++++++ > 2 files changed, 128 insertions(+), 1 deletion(-) > create mode 100644 drivers/pci/pci-of.c > > diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile > index 66a21acad952..4f76dbdb024c 100644 > --- a/drivers/pci/Makefile > +++ b/drivers/pci/Makefile > @@ -49,7 +49,7 @@ obj-$(CONFIG_PCI_ECAM) += ecam.o > > obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen-pcifront.o > > -obj-$(CONFIG_OF) += of.o > +obj-$(CONFIG_OF) += of.o pci-of.o > > ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG > > diff --git a/drivers/pci/pci-of.c b/drivers/pci/pci-of.c > new file mode 100644 > index 000000000000..28f3c4a0eec8 > --- /dev/null > +++ b/drivers/pci/pci-of.c > @@ -0,0 +1,127 @@ > +/* > + * OF PCI PM support > + * > + * Copyright (c) 2017 Rockchip, Inc. > + * > + * Author: Jeffy Chen <jeffy.chen@rock-chips.com> > + * > + * This program is free software: you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation, either version 2 of the License, or > + * (at your option) any later version. > + */ > + > +#include <linux/init.h> > +#include <linux/of_irq.h> > +#include <linux/pci.h> > +#include <linux/pm_wakeirq.h> > +#include "pci.h" > + > +struct of_pci_pm_data { > + struct device *dev; > + unsigned int wakeup_irq; > + atomic_t wakeup_cnt; > +}; > + > +static void *of_pci_setup(struct device *dev) > +{ > + struct of_pci_pm_data *data; > + int irq, ret; > + > + if (!dev->of_node) > + return NULL; > + > + data = devm_kzalloc(dev, sizeof(struct of_pci_pm_data), GFP_KERNEL); > + if (!data) > + return ERR_PTR(-ENOMEM); > + > + irq = of_irq_get_byname(dev->of_node, "wakeup"); > + if (irq < 0) { > + if (irq == -EPROBE_DEFER) > + return ERR_PTR(irq); > + > + return NULL; > + } > + > + data->wakeup_irq = irq; > + data->dev = dev; > + > + device_init_wakeup(dev, true); > + ret = dev_pm_set_dedicated_wake_irq(dev, irq); I'm seeing this WARNING during system resume when I enable wake-on-Wifi with this series: [ 135.259920] Unbalanced IRQ 64 wake disable [ 135.259929] ------------[ cut here ]------------ [ 135.259942] WARNING: CPU: 0 PID: 3233 at kernel/irq/manage.c:606 irq_set_irq_wake+0xac/0x12c [ 135.259944] Modules linked in: btusb btrtl btbcm btintel bluetooth ecdh_generic cdc_ether usbnet uvcvideo mwifiex_pcie videobuf2_vmalloc videobuf2_memops mwifiex videobuf2_v4l2 videobuf2_core cfg80211 ip6table_filter r8152 mii joydev [ 135.259986] CPU: 0 PID: 3233 Comm: bash Not tainted 4.14.0-rc3+ #40 [ 135.259988] Hardware name: Google Kevin (DT) [ 135.259991] task: ffffffc0f133c880 task.stack: ffffff8010520000 [ 135.259994] PC is at irq_set_irq_wake+0xac/0x12c [ 135.259998] LR is at irq_set_irq_wake+0xac/0x12c ... [ 135.260121] [<ffffff80080ff1a4>] irq_set_irq_wake+0xac/0x12c [ 135.260127] [<ffffff8008494a7c>] dev_pm_disarm_wake_irq+0x3c/0x58 [ 135.260133] [<ffffff800849989c>] device_wakeup_disarm_wake_irqs+0x50/0x78 [ 135.260137] [<ffffff800849667c>] dpm_noirq_end+0x18/0x24 [ 135.260140] [<ffffff80084966ac>] dpm_resume_noirq+0x24/0x30 [ 135.260146] [<ffffff80080f85cc>] suspend_devices_and_enter+0x474/0x970 [ 135.260150] [<ffffff80080f9150>] pm_suspend+0x688/0x6cc [ 135.260154] [<ffffff80080f7388>] state_store+0xd4/0xf8 [ 135.260160] [<ffffff80087c3f3c>] kobj_attr_store+0x18/0x28 [ 135.260165] [<ffffff80082818f8>] sysfs_kf_write+0x5c/0x68 [ 135.260169] [<ffffff80082808c0>] kernfs_fop_write+0x15c/0x198 [ 135.260174] [<ffffff80082081a8>] __vfs_write+0x58/0x160 [ 135.260178] [<ffffff8008208484>] vfs_write+0xc4/0x15c [ 135.260181] [<ffffff80082086cc>] SyS_write+0x64/0xb4 I'm not yet sure if this is your series' fault, or if the dedicated wake IRQ infrastructure did something wrong. > + if (ret < 0) { > + device_init_wakeup(dev, false); > + return NULL; > + } > + device_set_wakeup_capable(dev, false); > + > + dev_info(dev, "Wakeup IRQ %d\n", irq); Do you actually need to print this out? It'll be available in things like /proc/interrupts now, so this seems overkill. > + return data; > +} > + > +static void *of_pci_setup_dev(struct pci_dev *pci_dev) > +{ > + return of_pci_setup(&pci_dev->dev); > +} > + > +static void *of_pci_setup_host_bridge(struct pci_host_bridge *bridge) > +{ > + return of_pci_setup(bridge->dev.parent); > +} > + > +static void of_pci_cleanup(void *pmdata) > +{ > + struct of_pci_pm_data *data = pmdata; > + > + if (!IS_ERR_OR_NULL(data)) { > + device_init_wakeup(data->dev, false); > + dev_pm_clear_wake_irq(data->dev); > + } > +} > + > +static bool of_pci_can_wakeup(void *pmdata) > +{ > + struct of_pci_pm_data *data = pmdata; > + > + if (IS_ERR_OR_NULL(data)) > + return false; > + > + return data->wakeup_irq > 0; > +} > + > +static int of_pci_dev_wakeup(void *pmdata, bool enable) > +{ > + struct of_pci_pm_data *data = pmdata; > + struct device *dev = data->dev; > + > + device_set_wakeup_capable(dev, enable); > + return 0; > +} > + > +static int of_pci_bridge_wakeup(void *pmdata, bool enable) > +{ > + struct of_pci_pm_data *data = pmdata; > + > + if (enable && atomic_inc_return(&data->wakeup_cnt) != 1) > + return 0; > + > + if (!enable && atomic_dec_return(&data->wakeup_cnt) != 0) > + return 0; > + > + return of_pci_dev_wakeup(pmdata, enable); > +} > + > +static const struct pci_platform_pm_ops of_pci_platform_pm = { > + .setup_dev = of_pci_setup_dev, > + .setup_host_bridge = of_pci_setup_host_bridge, > + .cleanup = of_pci_cleanup, > + .can_wakeup = of_pci_can_wakeup, > + .dev_wakeup = of_pci_dev_wakeup, > + .bridge_wakeup = of_pci_bridge_wakeup, > +}; > + > +static int __init of_pci_init(void) > +{ I still don't think you've worked out the potential conflict between ACPI and OF on (e.g.) ARM64 systems with both enabled in the kernel. On such kernels, both acpi_pci_init() and of_pci_init() are built in as arch_initcalls, and which one wins will be based on implementation details like link order. Seems like acpi_pci_init() could still use something like this: if (acpi_disabled) return; And do the opposite here in of_pci_init(). It also feels like we could use something like this in pci.c: void pci_set_platform_pm(const struct pci_platform_pm_ops *ops) { + WARN(pci_platform_pm, "PCI platform PM ops already registered\n"); pci_platform_pm = ops; } And I wonder what happens with pci-mid.c -- does this currently win the collision because pci-mid.o is linked after pci-acpi.o? Brian > + pci_set_platform_pm(&of_pci_platform_pm); > + return 0; > +} > +arch_initcall(of_pci_init); > -- > 2.11.0 > >
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 66a21acad952..4f76dbdb024c 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -49,7 +49,7 @@ obj-$(CONFIG_PCI_ECAM) += ecam.o obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen-pcifront.o -obj-$(CONFIG_OF) += of.o +obj-$(CONFIG_OF) += of.o pci-of.o ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG diff --git a/drivers/pci/pci-of.c b/drivers/pci/pci-of.c new file mode 100644 index 000000000000..28f3c4a0eec8 --- /dev/null +++ b/drivers/pci/pci-of.c @@ -0,0 +1,127 @@ +/* + * OF PCI PM support + * + * Copyright (c) 2017 Rockchip, Inc. + * + * Author: Jeffy Chen <jeffy.chen@rock-chips.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/init.h> +#include <linux/of_irq.h> +#include <linux/pci.h> +#include <linux/pm_wakeirq.h> +#include "pci.h" + +struct of_pci_pm_data { + struct device *dev; + unsigned int wakeup_irq; + atomic_t wakeup_cnt; +}; + +static void *of_pci_setup(struct device *dev) +{ + struct of_pci_pm_data *data; + int irq, ret; + + if (!dev->of_node) + return NULL; + + data = devm_kzalloc(dev, sizeof(struct of_pci_pm_data), GFP_KERNEL); + if (!data) + return ERR_PTR(-ENOMEM); + + irq = of_irq_get_byname(dev->of_node, "wakeup"); + if (irq < 0) { + if (irq == -EPROBE_DEFER) + return ERR_PTR(irq); + + return NULL; + } + + data->wakeup_irq = irq; + data->dev = dev; + + device_init_wakeup(dev, true); + ret = dev_pm_set_dedicated_wake_irq(dev, irq); + if (ret < 0) { + device_init_wakeup(dev, false); + return NULL; + } + device_set_wakeup_capable(dev, false); + + dev_info(dev, "Wakeup IRQ %d\n", irq); + return data; +} + +static void *of_pci_setup_dev(struct pci_dev *pci_dev) +{ + return of_pci_setup(&pci_dev->dev); +} + +static void *of_pci_setup_host_bridge(struct pci_host_bridge *bridge) +{ + return of_pci_setup(bridge->dev.parent); +} + +static void of_pci_cleanup(void *pmdata) +{ + struct of_pci_pm_data *data = pmdata; + + if (!IS_ERR_OR_NULL(data)) { + device_init_wakeup(data->dev, false); + dev_pm_clear_wake_irq(data->dev); + } +} + +static bool of_pci_can_wakeup(void *pmdata) +{ + struct of_pci_pm_data *data = pmdata; + + if (IS_ERR_OR_NULL(data)) + return false; + + return data->wakeup_irq > 0; +} + +static int of_pci_dev_wakeup(void *pmdata, bool enable) +{ + struct of_pci_pm_data *data = pmdata; + struct device *dev = data->dev; + + device_set_wakeup_capable(dev, enable); + return 0; +} + +static int of_pci_bridge_wakeup(void *pmdata, bool enable) +{ + struct of_pci_pm_data *data = pmdata; + + if (enable && atomic_inc_return(&data->wakeup_cnt) != 1) + return 0; + + if (!enable && atomic_dec_return(&data->wakeup_cnt) != 0) + return 0; + + return of_pci_dev_wakeup(pmdata, enable); +} + +static const struct pci_platform_pm_ops of_pci_platform_pm = { + .setup_dev = of_pci_setup_dev, + .setup_host_bridge = of_pci_setup_host_bridge, + .cleanup = of_pci_cleanup, + .can_wakeup = of_pci_can_wakeup, + .dev_wakeup = of_pci_dev_wakeup, + .bridge_wakeup = of_pci_bridge_wakeup, +}; + +static int __init of_pci_init(void) +{ + pci_set_platform_pm(&of_pci_platform_pm); + return 0; +} +arch_initcall(of_pci_init);
Add pci-of.c to handle the PCIe WAKE# interrupt. Also use the dedicated wakeirq infrastructure to simplify it. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> --- Changes in v10: Use device_set_wakeup_capable() instead of device_set_wakeup_enable(), since dedicated wakeirq will be lost in device_set_wakeup_enable(false). Changes in v9: Fix check error in .cleanup(). Move dedicated wakeirq setup to setup() callback and use device_set_wakeup_enable() to enable/disable. Changes in v8: Add pci-of.c and use platform_pm_ops to handle the PCIe WAKE# signal. Changes in v7: Move PCIE_WAKE handling into pci core. Changes in v6: Fix device_init_wake error handling, and add some comments. Changes in v5: Rebase. Changes in v3: Fix error handling. Changes in v2: Use dev_pm_set_dedicated_wake_irq. drivers/pci/Makefile | 2 +- drivers/pci/pci-of.c | 127 +++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 128 insertions(+), 1 deletion(-) create mode 100644 drivers/pci/pci-of.c