| Message ID | 20171030124221.20690-8-niklas.cassel@axis.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
On Monday 30 October 2017 06:12 PM, Niklas Cassel wrote: > The previous handling was a bit unorthodox and would have been a bit > bloated once more DWC based controllers added support for ep mode. > > Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> > --- > V2: > * New patch in this series. > > drivers/pci/dwc/Kconfig | 45 ++++++++++++++++++++++----------------------- > drivers/pci/dwc/Makefile | 4 +--- > 2 files changed, 23 insertions(+), 26 deletions(-) > > diff --git a/drivers/pci/dwc/Kconfig b/drivers/pci/dwc/Kconfig > index 113e09440f85..3954353e3e2e 100644 > --- a/drivers/pci/dwc/Kconfig > +++ b/drivers/pci/dwc/Kconfig > @@ -15,39 +15,38 @@ config PCIE_DW_EP > select PCIE_DW > > config PCI_DRA7XX > - bool "TI DRA7xx PCIe controller" > - depends on SOC_DRA7XX || COMPILE_TEST > - depends on (PCI && PCI_MSI_IRQ_DOMAIN) || PCI_ENDPOINT > - depends on OF && HAS_IOMEM && TI_PIPE3 > - help > - Enables support for the PCIe controller in the DRA7xx SoC. There > - are two instances of PCIe controller in DRA7xx. This controller can > - work either as EP or RC. In order to enable host-specific features > - PCI_DRA7XX_HOST must be selected and in order to enable device- > - specific features PCI_DRA7XX_EP must be selected. This uses > - the DesignWare core. > - > -if PCI_DRA7XX > + bool > > config PCI_DRA7XX_HOST > - bool "PCI DRA7xx Host Mode" > - depends on PCI > - depends on PCI_MSI_IRQ_DOMAIN > + bool "TI DRA7xx PCIe controller Host Mode" > + depends on SOC_DRA7XX || COMPILE_TEST > + depends on PCI && PCI_MSI_IRQ_DOMAIN > + depends on OF && HAS_IOMEM && TI_PIPE3 > select PCIE_DW_HOST > + select PCI_DRA7XX > default y > help > - Enables support for the PCIe controller in the DRA7xx SoC to work in > - host mode. > + Enables support for the PCIe controller in the DRA7xx SoC to work in > + host mode. There are two instances of PCIe controller in DRA7xx. > + This controller can work either as EP or RC. In order to enable > + host-specific features PCI_DRA7XX_HOST must be selected and in order > + to enable device-specific features PCI_DRA7XX_EP must be selected. > + This uses the DesignWare core. > > config PCI_DRA7XX_EP > - bool "PCI DRA7xx Endpoint Mode" > + bool "TI DRA7xx PCIe controller Endpoint Mode" > + depends on SOC_DRA7XX || COMPILE_TEST > depends on PCI_ENDPOINT > + depends on OF && HAS_IOMEM && TI_PIPE3 > select PCIE_DW_EP > + select PCI_DRA7XX > help > - Enables support for the PCIe controller in the DRA7xx SoC to work in > - endpoint mode. > - > -endif > + Enables support for the PCIe controller in the DRA7xx SoC to work in > + endpoint mode. There are two instances of PCIe controller in DRA7xx. > + This controller can work either as EP or RC. In order to enable > + host-specific features PCI_DRA7XX_HOST must be selected and in order > + to enable device-specific features PCI_DRA7XX_EP must be selected. > + This uses the DesignWare core. > > config PCIE_DW_PLAT > bool "Platform bus based DesignWare PCIe Controller" > diff --git a/drivers/pci/dwc/Makefile b/drivers/pci/dwc/Makefile > index 54f56f6e9236..260589bd4e1d 100644 > --- a/drivers/pci/dwc/Makefile > +++ b/drivers/pci/dwc/Makefile > @@ -2,9 +2,7 @@ obj-$(CONFIG_PCIE_DW) += pcie-designware.o > obj-$(CONFIG_PCIE_DW_HOST) += pcie-designware-host.o > obj-$(CONFIG_PCIE_DW_EP) += pcie-designware-ep.o > obj-$(CONFIG_PCIE_DW_PLAT) += pcie-designware-plat.o > -ifneq ($(filter y,$(CONFIG_PCI_DRA7XX_HOST) $(CONFIG_PCI_DRA7XX_EP)),) > - obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o > -endif > +obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o > obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o > obj-$(CONFIG_PCI_IMX6) += pci-imx6.o > obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o >
diff --git a/drivers/pci/dwc/Kconfig b/drivers/pci/dwc/Kconfig index 113e09440f85..3954353e3e2e 100644 --- a/drivers/pci/dwc/Kconfig +++ b/drivers/pci/dwc/Kconfig @@ -15,39 +15,38 @@ config PCIE_DW_EP select PCIE_DW config PCI_DRA7XX - bool "TI DRA7xx PCIe controller" - depends on SOC_DRA7XX || COMPILE_TEST - depends on (PCI && PCI_MSI_IRQ_DOMAIN) || PCI_ENDPOINT - depends on OF && HAS_IOMEM && TI_PIPE3 - help - Enables support for the PCIe controller in the DRA7xx SoC. There - are two instances of PCIe controller in DRA7xx. This controller can - work either as EP or RC. In order to enable host-specific features - PCI_DRA7XX_HOST must be selected and in order to enable device- - specific features PCI_DRA7XX_EP must be selected. This uses - the DesignWare core. - -if PCI_DRA7XX + bool config PCI_DRA7XX_HOST - bool "PCI DRA7xx Host Mode" - depends on PCI - depends on PCI_MSI_IRQ_DOMAIN + bool "TI DRA7xx PCIe controller Host Mode" + depends on SOC_DRA7XX || COMPILE_TEST + depends on PCI && PCI_MSI_IRQ_DOMAIN + depends on OF && HAS_IOMEM && TI_PIPE3 select PCIE_DW_HOST + select PCI_DRA7XX default y help - Enables support for the PCIe controller in the DRA7xx SoC to work in - host mode. + Enables support for the PCIe controller in the DRA7xx SoC to work in + host mode. There are two instances of PCIe controller in DRA7xx. + This controller can work either as EP or RC. In order to enable + host-specific features PCI_DRA7XX_HOST must be selected and in order + to enable device-specific features PCI_DRA7XX_EP must be selected. + This uses the DesignWare core. config PCI_DRA7XX_EP - bool "PCI DRA7xx Endpoint Mode" + bool "TI DRA7xx PCIe controller Endpoint Mode" + depends on SOC_DRA7XX || COMPILE_TEST depends on PCI_ENDPOINT + depends on OF && HAS_IOMEM && TI_PIPE3 select PCIE_DW_EP + select PCI_DRA7XX help - Enables support for the PCIe controller in the DRA7xx SoC to work in - endpoint mode. - -endif + Enables support for the PCIe controller in the DRA7xx SoC to work in + endpoint mode. There are two instances of PCIe controller in DRA7xx. + This controller can work either as EP or RC. In order to enable + host-specific features PCI_DRA7XX_HOST must be selected and in order + to enable device-specific features PCI_DRA7XX_EP must be selected. + This uses the DesignWare core. config PCIE_DW_PLAT bool "Platform bus based DesignWare PCIe Controller" diff --git a/drivers/pci/dwc/Makefile b/drivers/pci/dwc/Makefile index 54f56f6e9236..260589bd4e1d 100644 --- a/drivers/pci/dwc/Makefile +++ b/drivers/pci/dwc/Makefile @@ -2,9 +2,7 @@ obj-$(CONFIG_PCIE_DW) += pcie-designware.o obj-$(CONFIG_PCIE_DW_HOST) += pcie-designware-host.o obj-$(CONFIG_PCIE_DW_EP) += pcie-designware-ep.o obj-$(CONFIG_PCIE_DW_PLAT) += pcie-designware-plat.o -ifneq ($(filter y,$(CONFIG_PCI_DRA7XX_HOST) $(CONFIG_PCI_DRA7XX_EP)),) - obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o -endif +obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o obj-$(CONFIG_PCI_IMX6) += pci-imx6.o obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
The previous handling was a bit unorthodox and would have been a bit bloated once more DWC based controllers added support for ep mode. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> --- V2: * New patch in this series. drivers/pci/dwc/Kconfig | 45 ++++++++++++++++++++++----------------------- drivers/pci/dwc/Makefile | 4 +--- 2 files changed, 23 insertions(+), 26 deletions(-)