diff mbox

[3/4] tsi108_eth: use dma API properly

Message ID 20180110180322.30186-4-hch@lst.de (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Christoph Hellwig Jan. 10, 2018, 6:03 p.m. UTC 
We need to pass a struct device to the dma API, even if some
architectures still support that for legacy reasons, and should not mix
it with the old PCI dma API.

Note that the driver also seems to never actually unmap its dma mappings,
but to fix that we'll need someone more familar with the driver.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 drivers/net/ethernet/tundra/tsi108_eth.c | 36 ++++++++++++++++++--------------
 1 file changed, 20 insertions(+), 16 deletions(-)

Comments

Andy Shevchenko Jan. 10, 2018, 8:09 p.m. UTC | #1 
On Wed, Jan 10, 2018 at 8:03 PM, Christoph Hellwig <hch@lst.de> wrote:
> We need to pass a struct device to the dma API, even if some
> architectures still support that for legacy reasons, and should not mix
> it with the old PCI dma API.
>
> Note that the driver also seems to never actually unmap its dma mappings,
> but to fix that we'll need someone more familar with the driver.

> +       struct platform_device *pdev;

Do you really need platform_defice reference?

Perhaps

struct device *hdev; // hardware device


data->hdev = &pdev->dev;

Another idea

dev->dev.parent = &pdev->dev;

No new member needed.

>  };
>
>  /* Structure for a device driver */
> @@ -703,17 +705,18 @@ static int tsi108_send_packet(struct sk_buff * skb, struct net_device *dev)
>                 data->txskbs[tx] = skb;
>
>                 if (i == 0) {
> -                       data->txring[tx].buf0 = dma_map_single(NULL, skb->data,
> -                                       skb_headlen(skb), DMA_TO_DEVICE);
> +                       data->txring[tx].buf0 = dma_map_single(&data->pdev->dev,
> +                                       skb->data, skb_headlen(skb),
> +                                       DMA_TO_DEVICE);
>                         data->txring[tx].len = skb_headlen(skb);
>                         misc |= TSI108_TX_SOF;
>                 } else {
>                         const skb_frag_t *frag = &skb_shinfo(skb)->frags[i - 1];
>
> -                       data->txring[tx].buf0 = skb_frag_dma_map(NULL, frag,
> -                                                                0,
> -                                                                skb_frag_size(frag),
> -                                                                DMA_TO_DEVICE);
> +                       data->txring[tx].buf0 =
> +                               skb_frag_dma_map(&data->pdev->dev, frag,
> +                                               0, skb_frag_size(frag),
> +                                               DMA_TO_DEVICE);
>                         data->txring[tx].len = skb_frag_size(frag);
>                 }
>
> @@ -808,9 +811,9 @@ static int tsi108_refill_rx(struct net_device *dev, int budget)
>                 if (!skb)
>                         break;
>
> -               data->rxring[rx].buf0 = dma_map_single(NULL, skb->data,
> -                                                       TSI108_RX_SKB_SIZE,
> -                                                       DMA_FROM_DEVICE);
> +               data->rxring[rx].buf0 = dma_map_single(&data->pdev->dev,
> +                               skb->data, TSI108_RX_SKB_SIZE,
> +                               DMA_FROM_DEVICE);
>
>                 /* Sometimes the hardware sets blen to zero after packet
>                  * reception, even though the manual says that it's only ever
> @@ -1308,15 +1311,15 @@ static int tsi108_open(struct net_device *dev)
>                        data->id, dev->irq, dev->name);
>         }
>
> -       data->rxring = dma_zalloc_coherent(NULL, rxring_size, &data->rxdma,
> -                                          GFP_KERNEL);
> +       data->rxring = dma_zalloc_coherent(&data->pdev->dev, rxring_size,
> +                       &data->rxdma, GFP_KERNEL);
>         if (!data->rxring)
>                 return -ENOMEM;
>
> -       data->txring = dma_zalloc_coherent(NULL, txring_size, &data->txdma,
> -                                          GFP_KERNEL);
> +       data->txring = dma_zalloc_coherent(&data->pdev->dev, txring_size,
> +                       &data->txdma, GFP_KERNEL);
>         if (!data->txring) {
> -               pci_free_consistent(NULL, rxring_size, data->rxring,
> +               dma_free_coherent(&data->pdev->dev, rxring_size, data->rxring,
>                                     data->rxdma);
>                 return -ENOMEM;
>         }
> @@ -1428,10 +1431,10 @@ static int tsi108_close(struct net_device *dev)
>                 dev_kfree_skb(skb);
>         }
>
> -       dma_free_coherent(0,
> +       dma_free_coherent(&data->pdev->dev,
>                             TSI108_RXRING_LEN * sizeof(rx_desc),
>                             data->rxring, data->rxdma);
> -       dma_free_coherent(0,
> +       dma_free_coherent(&data->pdev->dev,
>                             TSI108_TXRING_LEN * sizeof(tx_desc),
>                             data->txring, data->txdma);
>
> @@ -1576,6 +1579,7 @@ tsi108_init_one(struct platform_device *pdev)
>         printk("tsi108_eth%d: probe...\n", pdev->id);
>         data = netdev_priv(dev);
>         data->dev = dev;
> +       data->pdev = pdev;
>
>         pr_debug("tsi108_eth%d:regs:phyresgs:phy:irq_num=0x%x:0x%x:0x%x:0x%x\n",
>                         pdev->id, einfo->regs, einfo->phyregs,
> --
> 2.14.2
>
Christoph Hellwig Jan. 15, 2018, 3:11 p.m. UTC | #2 
On Wed, Jan 10, 2018 at 10:09:20PM +0200, Andy Shevchenko wrote:
> > +       struct platform_device *pdev;
> 
> Do you really need platform_defice reference?
> 
> Perhaps
> 
> struct device *hdev; // hardware device
> 
> 
> data->hdev = &pdev->dev;
> 
> Another idea
> 
> dev->dev.parent = &pdev->dev;
> 
> No new member needed.

Maybe.  But what I've done is the simplest change in a long obsolete
driver that I don't understand at all.  I'd rather keep it simple.
Bjorn Helgaas Jan. 18, 2018, 12:08 a.m. UTC | #3 
[+cc David, FYI, I plan to merge this via PCI along with the rest of
Christoph's series]

On Wed, Jan 10, 2018 at 07:03:21PM +0100, Christoph Hellwig wrote:
> We need to pass a struct device to the dma API, even if some
> architectures still support that for legacy reasons, and should not mix
> it with the old PCI dma API.
> 
> Note that the driver also seems to never actually unmap its dma mappings,
> but to fix that we'll need someone more familar with the driver.
> 
> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
>  drivers/net/ethernet/tundra/tsi108_eth.c | 36 ++++++++++++++++++--------------
>  1 file changed, 20 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/net/ethernet/tundra/tsi108_eth.c b/drivers/net/ethernet/tundra/tsi108_eth.c
> index 0624b71ab5d4..edcd1e60b30d 100644
> --- a/drivers/net/ethernet/tundra/tsi108_eth.c
> +++ b/drivers/net/ethernet/tundra/tsi108_eth.c
> @@ -152,6 +152,8 @@ struct tsi108_prv_data {
>  	u32 msg_enable;			/* debug message level */
>  	struct mii_if_info mii_if;
>  	unsigned int init_media;
> +
> +	struct platform_device *pdev;
>  };
>  
>  /* Structure for a device driver */
> @@ -703,17 +705,18 @@ static int tsi108_send_packet(struct sk_buff * skb, struct net_device *dev)
>  		data->txskbs[tx] = skb;
>  
>  		if (i == 0) {
> -			data->txring[tx].buf0 = dma_map_single(NULL, skb->data,
> -					skb_headlen(skb), DMA_TO_DEVICE);
> +			data->txring[tx].buf0 = dma_map_single(&data->pdev->dev,
> +					skb->data, skb_headlen(skb),
> +					DMA_TO_DEVICE);
>  			data->txring[tx].len = skb_headlen(skb);
>  			misc |= TSI108_TX_SOF;
>  		} else {
>  			const skb_frag_t *frag = &skb_shinfo(skb)->frags[i - 1];
>  
> -			data->txring[tx].buf0 = skb_frag_dma_map(NULL, frag,
> -								 0,
> -								 skb_frag_size(frag),
> -								 DMA_TO_DEVICE);
> +			data->txring[tx].buf0 =
> +				skb_frag_dma_map(&data->pdev->dev, frag,
> +						0, skb_frag_size(frag),
> +						DMA_TO_DEVICE);
>  			data->txring[tx].len = skb_frag_size(frag);
>  		}
>  
> @@ -808,9 +811,9 @@ static int tsi108_refill_rx(struct net_device *dev, int budget)
>  		if (!skb)
>  			break;
>  
> -		data->rxring[rx].buf0 = dma_map_single(NULL, skb->data,
> -							TSI108_RX_SKB_SIZE,
> -							DMA_FROM_DEVICE);
> +		data->rxring[rx].buf0 = dma_map_single(&data->pdev->dev,
> +				skb->data, TSI108_RX_SKB_SIZE,
> +				DMA_FROM_DEVICE);
>  
>  		/* Sometimes the hardware sets blen to zero after packet
>  		 * reception, even though the manual says that it's only ever
> @@ -1308,15 +1311,15 @@ static int tsi108_open(struct net_device *dev)
>  		       data->id, dev->irq, dev->name);
>  	}
>  
> -	data->rxring = dma_zalloc_coherent(NULL, rxring_size, &data->rxdma,
> -					   GFP_KERNEL);
> +	data->rxring = dma_zalloc_coherent(&data->pdev->dev, rxring_size,
> +			&data->rxdma, GFP_KERNEL);
>  	if (!data->rxring)
>  		return -ENOMEM;
>  
> -	data->txring = dma_zalloc_coherent(NULL, txring_size, &data->txdma,
> -					   GFP_KERNEL);
> +	data->txring = dma_zalloc_coherent(&data->pdev->dev, txring_size,
> +			&data->txdma, GFP_KERNEL);
>  	if (!data->txring) {
> -		pci_free_consistent(NULL, rxring_size, data->rxring,
> +		dma_free_coherent(&data->pdev->dev, rxring_size, data->rxring,
>  				    data->rxdma);
>  		return -ENOMEM;
>  	}
> @@ -1428,10 +1431,10 @@ static int tsi108_close(struct net_device *dev)
>  		dev_kfree_skb(skb);
>  	}
>  
> -	dma_free_coherent(0,
> +	dma_free_coherent(&data->pdev->dev,
>  			    TSI108_RXRING_LEN * sizeof(rx_desc),
>  			    data->rxring, data->rxdma);
> -	dma_free_coherent(0,
> +	dma_free_coherent(&data->pdev->dev,
>  			    TSI108_TXRING_LEN * sizeof(tx_desc),
>  			    data->txring, data->txdma);
>  
> @@ -1576,6 +1579,7 @@ tsi108_init_one(struct platform_device *pdev)
>  	printk("tsi108_eth%d: probe...\n", pdev->id);
>  	data = netdev_priv(dev);
>  	data->dev = dev;
> +	data->pdev = pdev;
>  
>  	pr_debug("tsi108_eth%d:regs:phyresgs:phy:irq_num=0x%x:0x%x:0x%x:0x%x\n",
>  			pdev->id, einfo->regs, einfo->phyregs,
> -- 
> 2.14.2
>
David Miller Jan. 18, 2018, 2:11 p.m. UTC | #4 
From: Bjorn Helgaas <helgaas@kernel.org>
Date: Wed, 17 Jan 2018 18:08:18 -0600

> [+cc David, FYI, I plan to merge this via PCI along with the rest of
> Christoph's series]

No problem.
diff mbox

Patch

diff --git a/drivers/net/ethernet/tundra/tsi108_eth.c b/drivers/net/ethernet/tundra/tsi108_eth.c
index 0624b71ab5d4..edcd1e60b30d 100644
--- a/drivers/net/ethernet/tundra/tsi108_eth.c
+++ b/drivers/net/ethernet/tundra/tsi108_eth.c
@@ -152,6 +152,8 @@  struct tsi108_prv_data {
 	u32 msg_enable;			/* debug message level */
 	struct mii_if_info mii_if;
 	unsigned int init_media;
+
+	struct platform_device *pdev;
 };
 
 /* Structure for a device driver */
@@ -703,17 +705,18 @@  static int tsi108_send_packet(struct sk_buff * skb, struct net_device *dev)
 		data->txskbs[tx] = skb;
 
 		if (i == 0) {
-			data->txring[tx].buf0 = dma_map_single(NULL, skb->data,
-					skb_headlen(skb), DMA_TO_DEVICE);
+			data->txring[tx].buf0 = dma_map_single(&data->pdev->dev,
+					skb->data, skb_headlen(skb),
+					DMA_TO_DEVICE);
 			data->txring[tx].len = skb_headlen(skb);
 			misc |= TSI108_TX_SOF;
 		} else {
 			const skb_frag_t *frag = &skb_shinfo(skb)->frags[i - 1];
 
-			data->txring[tx].buf0 = skb_frag_dma_map(NULL, frag,
-								 0,
-								 skb_frag_size(frag),
-								 DMA_TO_DEVICE);
+			data->txring[tx].buf0 =
+				skb_frag_dma_map(&data->pdev->dev, frag,
+						0, skb_frag_size(frag),
+						DMA_TO_DEVICE);
 			data->txring[tx].len = skb_frag_size(frag);
 		}
 
@@ -808,9 +811,9 @@  static int tsi108_refill_rx(struct net_device *dev, int budget)
 		if (!skb)
 			break;
 
-		data->rxring[rx].buf0 = dma_map_single(NULL, skb->data,
-							TSI108_RX_SKB_SIZE,
-							DMA_FROM_DEVICE);
+		data->rxring[rx].buf0 = dma_map_single(&data->pdev->dev,
+				skb->data, TSI108_RX_SKB_SIZE,
+				DMA_FROM_DEVICE);
 
 		/* Sometimes the hardware sets blen to zero after packet
 		 * reception, even though the manual says that it's only ever
@@ -1308,15 +1311,15 @@  static int tsi108_open(struct net_device *dev)
 		       data->id, dev->irq, dev->name);
 	}
 
-	data->rxring = dma_zalloc_coherent(NULL, rxring_size, &data->rxdma,
-					   GFP_KERNEL);
+	data->rxring = dma_zalloc_coherent(&data->pdev->dev, rxring_size,
+			&data->rxdma, GFP_KERNEL);
 	if (!data->rxring)
 		return -ENOMEM;
 
-	data->txring = dma_zalloc_coherent(NULL, txring_size, &data->txdma,
-					   GFP_KERNEL);
+	data->txring = dma_zalloc_coherent(&data->pdev->dev, txring_size,
+			&data->txdma, GFP_KERNEL);
 	if (!data->txring) {
-		pci_free_consistent(NULL, rxring_size, data->rxring,
+		dma_free_coherent(&data->pdev->dev, rxring_size, data->rxring,
 				    data->rxdma);
 		return -ENOMEM;
 	}
@@ -1428,10 +1431,10 @@  static int tsi108_close(struct net_device *dev)
 		dev_kfree_skb(skb);
 	}
 
-	dma_free_coherent(0,
+	dma_free_coherent(&data->pdev->dev,
 			    TSI108_RXRING_LEN * sizeof(rx_desc),
 			    data->rxring, data->rxdma);
-	dma_free_coherent(0,
+	dma_free_coherent(&data->pdev->dev,
 			    TSI108_TXRING_LEN * sizeof(tx_desc),
 			    data->txring, data->txdma);
 
@@ -1576,6 +1579,7 @@  tsi108_init_one(struct platform_device *pdev)
 	printk("tsi108_eth%d: probe...\n", pdev->id);
 	data = netdev_priv(dev);
 	data->dev = dev;
+	data->pdev = pdev;
 
 	pr_debug("tsi108_eth%d:regs:phyresgs:phy:irq_num=0x%x:0x%x:0x%x:0x%x\n",
 			pdev->id, einfo->regs, einfo->phyregs,