| Message ID | 20180214120616.23428-1-srinivas.kandagatla@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
Hi Srini, Thanks for the patch! On 02/14/2018 02:06 PM, srinivas.kandagatla@linaro.org wrote: > From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > > This patch adds supplies that are required for msm8996. vdda > is analog supply that go in to controller, and vddpe_3v3 is > supply to PCIe endpoint. > > Without these supplies PCIe endpoints which require power supplies are > not enumerated at all, as there is no one to power it up. > > Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > --- > Changes since v1: > - specify only one vddpe as suggested by Stan > > .../devicetree/bindings/pci/qcom,pcie.txt | 4 ++++ > drivers/pci/dwc/pcie-qcom.c | 24 ++++++++++++++++++++-- > 2 files changed, 26 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt > index 3c9d321b3d3b..1fd703bd73e0 100644 > --- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt > +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt > @@ -189,6 +189,10 @@ > Value type: <phandle> > Definition: A phandle to the analog power supply for IC which generates > reference clock > +- vddpe-3v3-supply: shouldn't it be vddpe_3v3-supply to be aligned with the other supplies? > + Usage: optional > + Value type: <phandle> > + Definition: A phandle to the PCIe endpoint power supply > > - phys: > Usage: required for apq8084 > diff --git a/drivers/pci/dwc/pcie-qcom.c b/drivers/pci/dwc/pcie-qcom.c > index 3e89909f8cb9..519a2ae416eb 100644 > --- a/drivers/pci/dwc/pcie-qcom.c > +++ b/drivers/pci/dwc/pcie-qcom.c > @@ -101,13 +101,14 @@ struct qcom_pcie_resources_1_0_0 { > struct reset_control *core; > struct regulator *vdda; > }; > - please keep above blank line. > +#define QCOM_PCIE_2_3_2_MAX_SUPPLY 2 > struct qcom_pcie_resources_2_3_2 { > struct clk *aux_clk; > struct clk *master_clk; > struct clk *slave_clk; > struct clk *cfg_clk; > struct clk *pipe_clk; > + struct regulator_bulk_data supplies[QCOM_PCIE_2_3_2_MAX_SUPPLY]; > }; > > struct qcom_pcie_resources_2_4_0 { > @@ -521,6 +522,14 @@ static int qcom_pcie_get_resources_2_3_2(struct qcom_pcie *pcie) > struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2; > struct dw_pcie *pci = pcie->pci; > struct device *dev = pci->dev; > + int ret; > + > + res->supplies[0].supply = "vdda"; > + res->supplies[1].supply = "vddpe-3v3"; > + ret = devm_regulator_bulk_get(dev, QCOM_PCIE_2_3_2_MAX_SUPPLY, > + res->supplies); > + if (ret) > + return ret; > > res->aux_clk = devm_clk_get(dev, "aux"); > if (IS_ERR(res->aux_clk)) > @@ -550,6 +559,8 @@ static void qcom_pcie_deinit_2_3_2(struct qcom_pcie *pcie) > clk_disable_unprepare(res->master_clk); > clk_disable_unprepare(res->cfg_clk); > clk_disable_unprepare(res->aux_clk); > + > + regulator_bulk_disable(QCOM_PCIE_2_3_2_MAX_SUPPLY, res->supplies); > } > > static void qcom_pcie_post_deinit_2_3_2(struct qcom_pcie *pcie) > @@ -567,10 +578,16 @@ static int qcom_pcie_init_2_3_2(struct qcom_pcie *pcie) > u32 val; > int ret; > > + ret = regulator_bulk_enable(QCOM_PCIE_2_3_2_MAX_SUPPLY, res->supplies); > + if (ret < 0) { > + dev_err(dev, "cannot enable regulators\n"); > + return ret; > + } > + > ret = clk_prepare_enable(res->aux_clk); > if (ret) { > dev_err(dev, "cannot prepare/enable aux clock\n"); > - return ret; > + goto err_aux_clk; > } > > ret = clk_prepare_enable(res->cfg_clk); > @@ -621,6 +638,9 @@ static int qcom_pcie_init_2_3_2(struct qcom_pcie *pcie) > err_cfg_clk: > clk_disable_unprepare(res->aux_clk); > > +err_aux_clk: > + regulator_bulk_disable(QCOM_PCIE_2_3_2_MAX_SUPPLY, res->supplies); > + > return ret; > } > >
On 14/02/18 16:00, Stanimir Varbanov wrote: >> .../devicetree/bindings/pci/qcom,pcie.txt | 4 ++++ >> drivers/pci/dwc/pcie-qcom.c | 24 ++++++++++++++++++++-- >> 2 files changed, 26 insertions(+), 2 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt >> index 3c9d321b3d3b..1fd703bd73e0 100644 >> --- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt >> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt >> @@ -189,6 +189,10 @@ >> Value type: <phandle> >> Definition: A phandle to the analog power supply for IC which generates >> reference clock >> +- vddpe-3v3-supply: > shouldn't it be vddpe_3v3-supply to be aligned with the other supplies? > I noticed that, I had to do it intentionally As dt properties should follow - instead of _ >> + Usage: optional >> + Value type: <phandle> >> + Definition: A phandle to the PCIe endpoint power supply >> >> - phys: >> Usage: required for apq8084 >> diff --git a/drivers/pci/dwc/pcie-qcom.c b/drivers/pci/dwc/pcie-qcom.c >> index 3e89909f8cb9..519a2ae416eb 100644 >> --- a/drivers/pci/dwc/pcie-qcom.c >> +++ b/drivers/pci/dwc/pcie-qcom.c >> @@ -101,13 +101,14 @@ struct qcom_pcie_resources_1_0_0 { >> struct reset_control *core; >> struct regulator *vdda; >> }; >> - > please keep above blank line. Will fix it. > >> +#define QCOM_PCIE_2_3_2_MAX_SUPPLY 2 >> struct qcom_pcie_resources_2_3_2 { >> struct clk *aux_clk; >> struct clk *master_clk; >> struct clk *slave_clk; >> struct clk *cfg_clk;
On 02/14/2018 06:14 PM, Srinivas Kandagatla wrote: > > > On 14/02/18 16:00, Stanimir Varbanov wrote: >>> .../devicetree/bindings/pci/qcom,pcie.txt | 4 ++++ >>> drivers/pci/dwc/pcie-qcom.c | 24 >>> ++++++++++++++++++++-- >>> 2 files changed, 26 insertions(+), 2 deletions(-) >>> >>> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt >>> b/Documentation/devicetree/bindings/pci/qcom,pcie.txt >>> index 3c9d321b3d3b..1fd703bd73e0 100644 >>> --- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt >>> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt >>> @@ -189,6 +189,10 @@ >>> Value type: <phandle> >>> Definition: A phandle to the analog power supply for IC which >>> generates >>> reference clock >>> +- vddpe-3v3-supply: >> shouldn't it be vddpe_3v3-supply to be aligned with the other supplies? >> > I noticed that, I had to do it intentionally > As dt properties should follow - instead of _ I don't agree with that. If the supply name is more than one word it should be separated by underscore ('git grep \-supply' in dts files).
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt index 3c9d321b3d3b..1fd703bd73e0 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt @@ -189,6 +189,10 @@ Value type: <phandle> Definition: A phandle to the analog power supply for IC which generates reference clock +- vddpe-3v3-supply: + Usage: optional + Value type: <phandle> + Definition: A phandle to the PCIe endpoint power supply - phys: Usage: required for apq8084 diff --git a/drivers/pci/dwc/pcie-qcom.c b/drivers/pci/dwc/pcie-qcom.c index 3e89909f8cb9..519a2ae416eb 100644 --- a/drivers/pci/dwc/pcie-qcom.c +++ b/drivers/pci/dwc/pcie-qcom.c @@ -101,13 +101,14 @@ struct qcom_pcie_resources_1_0_0 { struct reset_control *core; struct regulator *vdda; }; - +#define QCOM_PCIE_2_3_2_MAX_SUPPLY 2 struct qcom_pcie_resources_2_3_2 { struct clk *aux_clk; struct clk *master_clk; struct clk *slave_clk; struct clk *cfg_clk; struct clk *pipe_clk; + struct regulator_bulk_data supplies[QCOM_PCIE_2_3_2_MAX_SUPPLY]; }; struct qcom_pcie_resources_2_4_0 { @@ -521,6 +522,14 @@ static int qcom_pcie_get_resources_2_3_2(struct qcom_pcie *pcie) struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2; struct dw_pcie *pci = pcie->pci; struct device *dev = pci->dev; + int ret; + + res->supplies[0].supply = "vdda"; + res->supplies[1].supply = "vddpe-3v3"; + ret = devm_regulator_bulk_get(dev, QCOM_PCIE_2_3_2_MAX_SUPPLY, + res->supplies); + if (ret) + return ret; res->aux_clk = devm_clk_get(dev, "aux"); if (IS_ERR(res->aux_clk)) @@ -550,6 +559,8 @@ static void qcom_pcie_deinit_2_3_2(struct qcom_pcie *pcie) clk_disable_unprepare(res->master_clk); clk_disable_unprepare(res->cfg_clk); clk_disable_unprepare(res->aux_clk); + + regulator_bulk_disable(QCOM_PCIE_2_3_2_MAX_SUPPLY, res->supplies); } static void qcom_pcie_post_deinit_2_3_2(struct qcom_pcie *pcie) @@ -567,10 +578,16 @@ static int qcom_pcie_init_2_3_2(struct qcom_pcie *pcie) u32 val; int ret; + ret = regulator_bulk_enable(QCOM_PCIE_2_3_2_MAX_SUPPLY, res->supplies); + if (ret < 0) { + dev_err(dev, "cannot enable regulators\n"); + return ret; + } + ret = clk_prepare_enable(res->aux_clk); if (ret) { dev_err(dev, "cannot prepare/enable aux clock\n"); - return ret; + goto err_aux_clk; } ret = clk_prepare_enable(res->cfg_clk); @@ -621,6 +638,9 @@ static int qcom_pcie_init_2_3_2(struct qcom_pcie *pcie) err_cfg_clk: clk_disable_unprepare(res->aux_clk); +err_aux_clk: + regulator_bulk_disable(QCOM_PCIE_2_3_2_MAX_SUPPLY, res->supplies); + return ret; }