@@ -158,6 +158,7 @@ struct acpiphp_attention_info
#define SLOT_ENABLED (0x00000001)
#define SLOT_IS_GOING_AWAY (0x00000002)
+#define SLOT_IS_NATIVE (0x00000004)
/* function flags */
@@ -282,6 +282,9 @@ static acpi_status acpiphp_add_context(acpi_handle handle, u32 lvl, void *data,
slot->device = device;
INIT_LIST_HEAD(&slot->funcs);
+ if (pdev && pciehp_is_native(pdev))
+ slot->flags |= SLOT_IS_NATIVE;
+
list_add_tail(&slot->node, &bridge->slots);
/*
@@ -291,7 +294,7 @@ static acpi_status acpiphp_add_context(acpi_handle handle, u32 lvl, void *data,
* expose slots to user space in those cases.
*/
if ((acpi_pci_check_ejectable(pbus, handle) || is_dock_device(adev))
- && !(pdev && pdev->is_hotplug_bridge && pciehp_is_native(pdev))) {
+ && !(slot->flags & SLOT_IS_NATIVE && pdev->is_hotplug_bridge)) {
unsigned long long sun;
int retval;
@@ -430,6 +433,29 @@ static int acpiphp_rescan_slot(struct acpiphp_slot *slot)
return pci_scan_slot(slot->bus, PCI_DEVFN(slot->device, 0));
}
+static void acpiphp_native_scan_bridge(struct pci_dev *bridge)
+{
+ struct pci_bus *bus = bridge->subordinate;
+ struct pci_dev *dev;
+ int max;
+
+ if (!bus)
+ return;
+
+ max = bus->busn_res.start;
+ /* Scan already configured non-hotplug bridges */
+ for_each_pci_bridge(dev, bus) {
+ if (!dev->is_hotplug_bridge)
+ max = pci_scan_bridge(bus, dev, max, 0);
+ }
+
+ /* Scan non-hotplug bridges that need to be reconfigured */
+ for_each_pci_bridge(dev, bus) {
+ if (!dev->is_hotplug_bridge)
+ max = pci_scan_bridge(bus, dev, max, 1);
+ }
+}
+
/**
* enable_slot - enable, configure a slot
* @slot: slot to be enabled
@@ -442,25 +468,42 @@ static void enable_slot(struct acpiphp_slot *slot)
struct pci_dev *dev;
struct pci_bus *bus = slot->bus;
struct acpiphp_func *func;
- int max, pass;
- LIST_HEAD(add_list);
- acpiphp_rescan_slot(slot);
- max = acpiphp_max_busnr(bus);
- for (pass = 0; pass < 2; pass++) {
+ if (slot->flags & SLOT_IS_NATIVE) {
+ /*
+ * If native PCIe hotplug is used, it will take care of
+ * hotplug slot management and resource allocation for
+ * hotplug bridges. However, ACPI hotplug may still be
+ * used for non-hotplug bridges to bring in additional
+ * devices such as Thunderbolt host controller.
+ */
for_each_pci_bridge(dev, bus) {
- if (PCI_SLOT(dev->devfn) != slot->device)
- continue;
-
- max = pci_scan_bridge(bus, dev, max, pass);
- if (pass && dev->subordinate) {
- check_hotplug_bridge(slot, dev);
- pcibios_resource_survey_bus(dev->subordinate);
- __pci_bus_size_bridges(dev->subordinate, &add_list);
+ if (PCI_SLOT(dev->devfn) == slot->device)
+ acpiphp_native_scan_bridge(dev);
+ }
+ pci_assign_unassigned_bridge_resources(bus->self);
+ } else {
+ LIST_HEAD(add_list);
+ int max, pass;
+
+ acpiphp_rescan_slot(slot);
+ max = acpiphp_max_busnr(bus);
+ for (pass = 0; pass < 2; pass++) {
+ for_each_pci_bridge(dev, bus) {
+ if (PCI_SLOT(dev->devfn) != slot->device)
+ continue;
+
+ max = pci_scan_bridge(bus, dev, max, pass);
+ if (pass && dev->subordinate) {
+ check_hotplug_bridge(slot, dev);
+ pcibios_resource_survey_bus(dev->subordinate);
+ __pci_bus_size_bridges(dev->subordinate,
+ &add_list);
+ }
}
}
+ __pci_bus_assign_resources(bus, &add_list, NULL);
}
- __pci_bus_assign_resources(bus, &add_list, NULL);
acpiphp_sanitize_bus(bus);
pcie_bus_configure_settings(bus);
When a system is using native PCIe hotplug for Thunderbolt and the controller is not enabled for full RTD3 (runtime D3) it will be only present in the system when there is a device connected. This pretty much follows the BIOS assisted hotplug behaviour. Thunderbolt host router integrated PCIe switch has two additional PCIe downstream bridges that lead to NHI (Thunderbolt host controller) and xHCI (USB 3 host controller) respectively. These downstream bridges are not marked being hotplug capable. Reason for that is to preserve resources. Otherwise the OS would distribute remaining resources between all downstream bridges making these two bridges consume precious resources of the actual hotplug bridges. Now, because these two bridges are not marked being hotplug capable the OS will not enable hotplug interrupt for them either and will not receive interrupt when devices behind them are hot-added. Solution to this is that the BIOS sends ACPI Notify() to the root port let the OS know it needs to rescan for added and/or removed devices. Here is how the mechanism is supposed to work when a Thunderbolt endpoint is connected to one of the ports. In case of a standard USB-C device only the xHCI is hot-added otherwise steps are the same. 1. Initially there is only the PCIe root port that is controlled by the pciehp driver 00:1b.0 (Hotplug+) -- 2. Then we get native PCIe hotplug interrupt and once it is handled the topology looks as following 00:1b.0 (Hotplug+) -- 01:00.0 --+- 02:00.0 -- +- 02:01.0 (HotPlug+) \- 02:02.0 -- 3. Bridges 02:00.0 and 02:02.0 are not marked as hotplug capable and they don't have anything behind them currently. Bridge 02:01.0 is hotplug capable and used for extending the topology. At this point the required PCIe devices are enabled and ACPI Notify() is sent to the root port. The resulting topology is expected to look like 00:1b.0 (Hotplug+) -- 01:00.0 --+- 02:00.0 -- Thunderbolt host controller +- 02:01.0 (HotPlug+) \- 02:02.0 -- xHCI host controller However, the current ACPI hotplug implementation scans the whole 00:1b.0 hotplug slot and everything behind it regardless whether native PCIe is used or not, and it expects that the BIOS has configured bridge resources upfront. If that's not the case it assigns resources using minimal allocation (everything currently found just barely fit) preventing future extension. In addition to that, if there is another native PCIe hotplug going on we may find the new PCIe switch only partially ready (all links are not fully trained yet) confusing pciehp when it finally starts to enumerate for new devices. To make this work better with the native PCIe hotplug driver (pciehp), we let it handle all slot management and resource allocation for hotplug bridges and restrict ACPI hotplug to non-hotplug bridges. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable@vger.kernel.org --- drivers/pci/hotplug/acpiphp.h | 1 + drivers/pci/hotplug/acpiphp_glue.c | 73 ++++++++++++++++++++++++++++++-------- 2 files changed, 59 insertions(+), 15 deletions(-)