Message ID | 20180525190934.1042-1-bjorn.andersson@linaro.org (mailing list archive) |
---|---|
State | New, archived |
Delegated to: | Bjorn Helgaas |
Headers | show |
On Fri, May 25, 2018 at 12:09:34PM -0700, Bjorn Andersson wrote: > The driver does not cope with the fact that probe can fail in a number > of cases after enabling pm_runtime on the device, this results in > warnings about "Unbalanced pm_runtime_enable". Further more if probe > fails after invoking host_init the power-domain will be left referenced. > > As it's not possible for the error handling in qcom_pcie_host_init() to > handle errors happening after returning from that function the > pm_runtime_get_sync() is moved to probe() as well. > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > --- > > I'm sorry for not spotting this last week when we discussed the previous patch. I need Stanimir's ACK to merge it, thanks. Lorenzo > drivers/pci/dwc/pcie-qcom.c | 65 ++++++++++++++++++++++++++----------- > 1 file changed, 46 insertions(+), 19 deletions(-) > > diff --git a/drivers/pci/dwc/pcie-qcom.c b/drivers/pci/dwc/pcie-qcom.c > index 3f35098b71b1..f2453196278f 100644 > --- a/drivers/pci/dwc/pcie-qcom.c > +++ b/drivers/pci/dwc/pcie-qcom.c > @@ -1088,8 +1088,6 @@ static int qcom_pcie_host_init(struct pcie_port *pp) > struct qcom_pcie *pcie = to_qcom_pcie(pci); > int ret; > > - pm_runtime_get_sync(pci->dev); > - > qcom_ep_reset_assert(pcie); > > ret = pcie->ops->init(pcie); > @@ -1126,7 +1124,6 @@ static int qcom_pcie_host_init(struct pcie_port *pp) > phy_power_off(pcie->phy); > err_deinit: > pcie->ops->deinit(pcie); > - pm_runtime_put_sync(pci->dev); > > return ret; > } > @@ -1207,7 +1204,6 @@ static int qcom_pcie_probe(struct platform_device *pdev) > struct qcom_pcie *pcie; > int ret; > > - > pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL); > if (!pcie) > return -ENOMEM; > @@ -1217,6 +1213,7 @@ static int qcom_pcie_probe(struct platform_device *pdev) > return -ENOMEM; > > pm_runtime_enable(dev); > + pm_runtime_get_sync(dev); > > pci->dev = dev; > pci->ops = &dw_pcie_ops; > @@ -1227,53 +1224,82 @@ static int qcom_pcie_probe(struct platform_device *pdev) > pcie->ops = of_device_get_match_data(dev); > > pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_LOW); > - if (IS_ERR(pcie->reset)) > - return PTR_ERR(pcie->reset); > + if (IS_ERR(pcie->reset)) { > + ret = PTR_ERR(pcie->reset); > + goto err_pm_runtime_put; > + } > > res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "parf"); > pcie->parf = devm_ioremap_resource(dev, res); > - if (IS_ERR(pcie->parf)) > - return PTR_ERR(pcie->parf); > + if (IS_ERR(pcie->parf)) { > + ret = PTR_ERR(pcie->parf); > + goto err_pm_runtime_put; > + } > > res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi"); > pci->dbi_base = devm_pci_remap_cfg_resource(dev, res); > - if (IS_ERR(pci->dbi_base)) > - return PTR_ERR(pci->dbi_base); > + if (IS_ERR(pci->dbi_base)) { > + ret = PTR_ERR(pci->dbi_base); > + goto err_pm_runtime_put; > + } > > res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "elbi"); > pcie->elbi = devm_ioremap_resource(dev, res); > - if (IS_ERR(pcie->elbi)) > - return PTR_ERR(pcie->elbi); > + if (IS_ERR(pcie->elbi)) { > + ret = PTR_ERR(pcie->elbi); > + goto err_pm_runtime_put; > + } > > pcie->phy = devm_phy_optional_get(dev, "pciephy"); > - if (IS_ERR(pcie->phy)) > - return PTR_ERR(pcie->phy); > + if (IS_ERR(pcie->phy)) { > + ret = PTR_ERR(pcie->phy); > + goto err_pm_runtime_put; > + } > > ret = pcie->ops->get_resources(pcie); > if (ret) > - return ret; > + goto err_pm_runtime_put; > > pp->root_bus_nr = -1; > pp->ops = &qcom_pcie_dw_ops; > > if (IS_ENABLED(CONFIG_PCI_MSI)) { > pp->msi_irq = platform_get_irq_byname(pdev, "msi"); > - if (pp->msi_irq < 0) > - return pp->msi_irq; > + if (pp->msi_irq < 0) { > + ret = pp->msi_irq; > + goto err_pm_runtime_put; > + } > } > > ret = phy_init(pcie->phy); > if (ret) > - return ret; > + goto err_pm_runtime_put; > > platform_set_drvdata(pdev, pcie); > > ret = dw_pcie_host_init(pp); > if (ret) { > dev_err(dev, "cannot initialize host\n"); > - return ret; > + goto err_pm_runtime_put; > } > > + return 0; > + > +err_pm_runtime_put: > + pm_runtime_put(dev); > + pm_runtime_disable(dev); > + > + return ret; > +} > + > +static int qcom_pcie_remove(struct platform_device *pdev) > +{ > + struct qcom_pcie *pcie = platform_get_drvdata(pdev); > + struct device *dev = pcie->pci->dev; > + > + pm_runtime_put(dev); > + pm_runtime_disable(dev); > + > return 0; > } > > @@ -1289,6 +1315,7 @@ static const struct of_device_id qcom_pcie_match[] = { > > static struct platform_driver qcom_pcie_driver = { > .probe = qcom_pcie_probe, > + .remove = qcom_pcie_remove, > .driver = { > .name = "qcom-pcie", > .suppress_bind_attrs = true, > -- > 2.17.0 >
Hi Bjorn, On 05/25/2018 10:09 PM, Bjorn Andersson wrote: > The driver does not cope with the fact that probe can fail in a number > of cases after enabling pm_runtime on the device, this results in > warnings about "Unbalanced pm_runtime_enable". Further more if probe > fails after invoking host_init the power-domain will be left referenced. > > As it's not possible for the error handling in qcom_pcie_host_init() to > handle errors happening after returning from that function the > pm_runtime_get_sync() is moved to probe() as well. > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Please add: Fixes: 854b69efbdd2903991506ac5d5624d2cfb5b4e2f PCI: qcom: add runtime pm support to pcie_port > --- > > I'm sorry for not spotting this last week when we discussed the previous patch. > > drivers/pci/dwc/pcie-qcom.c | 65 ++++++++++++++++++++++++++----------- the path has been changed to drivers/pci/controller/dwc/pcie-qcom.c > 1 file changed, 46 insertions(+), 19 deletions(-) > > diff --git a/drivers/pci/dwc/pcie-qcom.c b/drivers/pci/dwc/pcie-qcom.c > index 3f35098b71b1..f2453196278f 100644 > --- a/drivers/pci/dwc/pcie-qcom.c > +++ b/drivers/pci/dwc/pcie-qcom.c > @@ -1088,8 +1088,6 @@ static int qcom_pcie_host_init(struct pcie_port *pp) > struct qcom_pcie *pcie = to_qcom_pcie(pci); > int ret; > > - pm_runtime_get_sync(pci->dev); > - > qcom_ep_reset_assert(pcie); > > ret = pcie->ops->init(pcie); > @@ -1126,7 +1124,6 @@ static int qcom_pcie_host_init(struct pcie_port *pp) > phy_power_off(pcie->phy); > err_deinit: > pcie->ops->deinit(pcie); > - pm_runtime_put_sync(pci->dev); > > return ret; > } > @@ -1207,7 +1204,6 @@ static int qcom_pcie_probe(struct platform_device *pdev) > struct qcom_pcie *pcie; > int ret; > > - > pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL); > if (!pcie) > return -ENOMEM; > @@ -1217,6 +1213,7 @@ static int qcom_pcie_probe(struct platform_device *pdev) > return -ENOMEM; > > pm_runtime_enable(dev); > + pm_runtime_get_sync(dev); pm_runtime_get_sync could fail, please check for errors. With those changes addressed: Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
diff --git a/drivers/pci/dwc/pcie-qcom.c b/drivers/pci/dwc/pcie-qcom.c index 3f35098b71b1..f2453196278f 100644 --- a/drivers/pci/dwc/pcie-qcom.c +++ b/drivers/pci/dwc/pcie-qcom.c @@ -1088,8 +1088,6 @@ static int qcom_pcie_host_init(struct pcie_port *pp) struct qcom_pcie *pcie = to_qcom_pcie(pci); int ret; - pm_runtime_get_sync(pci->dev); - qcom_ep_reset_assert(pcie); ret = pcie->ops->init(pcie); @@ -1126,7 +1124,6 @@ static int qcom_pcie_host_init(struct pcie_port *pp) phy_power_off(pcie->phy); err_deinit: pcie->ops->deinit(pcie); - pm_runtime_put_sync(pci->dev); return ret; } @@ -1207,7 +1204,6 @@ static int qcom_pcie_probe(struct platform_device *pdev) struct qcom_pcie *pcie; int ret; - pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL); if (!pcie) return -ENOMEM; @@ -1217,6 +1213,7 @@ static int qcom_pcie_probe(struct platform_device *pdev) return -ENOMEM; pm_runtime_enable(dev); + pm_runtime_get_sync(dev); pci->dev = dev; pci->ops = &dw_pcie_ops; @@ -1227,53 +1224,82 @@ static int qcom_pcie_probe(struct platform_device *pdev) pcie->ops = of_device_get_match_data(dev); pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_LOW); - if (IS_ERR(pcie->reset)) - return PTR_ERR(pcie->reset); + if (IS_ERR(pcie->reset)) { + ret = PTR_ERR(pcie->reset); + goto err_pm_runtime_put; + } res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "parf"); pcie->parf = devm_ioremap_resource(dev, res); - if (IS_ERR(pcie->parf)) - return PTR_ERR(pcie->parf); + if (IS_ERR(pcie->parf)) { + ret = PTR_ERR(pcie->parf); + goto err_pm_runtime_put; + } res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi"); pci->dbi_base = devm_pci_remap_cfg_resource(dev, res); - if (IS_ERR(pci->dbi_base)) - return PTR_ERR(pci->dbi_base); + if (IS_ERR(pci->dbi_base)) { + ret = PTR_ERR(pci->dbi_base); + goto err_pm_runtime_put; + } res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "elbi"); pcie->elbi = devm_ioremap_resource(dev, res); - if (IS_ERR(pcie->elbi)) - return PTR_ERR(pcie->elbi); + if (IS_ERR(pcie->elbi)) { + ret = PTR_ERR(pcie->elbi); + goto err_pm_runtime_put; + } pcie->phy = devm_phy_optional_get(dev, "pciephy"); - if (IS_ERR(pcie->phy)) - return PTR_ERR(pcie->phy); + if (IS_ERR(pcie->phy)) { + ret = PTR_ERR(pcie->phy); + goto err_pm_runtime_put; + } ret = pcie->ops->get_resources(pcie); if (ret) - return ret; + goto err_pm_runtime_put; pp->root_bus_nr = -1; pp->ops = &qcom_pcie_dw_ops; if (IS_ENABLED(CONFIG_PCI_MSI)) { pp->msi_irq = platform_get_irq_byname(pdev, "msi"); - if (pp->msi_irq < 0) - return pp->msi_irq; + if (pp->msi_irq < 0) { + ret = pp->msi_irq; + goto err_pm_runtime_put; + } } ret = phy_init(pcie->phy); if (ret) - return ret; + goto err_pm_runtime_put; platform_set_drvdata(pdev, pcie); ret = dw_pcie_host_init(pp); if (ret) { dev_err(dev, "cannot initialize host\n"); - return ret; + goto err_pm_runtime_put; } + return 0; + +err_pm_runtime_put: + pm_runtime_put(dev); + pm_runtime_disable(dev); + + return ret; +} + +static int qcom_pcie_remove(struct platform_device *pdev) +{ + struct qcom_pcie *pcie = platform_get_drvdata(pdev); + struct device *dev = pcie->pci->dev; + + pm_runtime_put(dev); + pm_runtime_disable(dev); + return 0; } @@ -1289,6 +1315,7 @@ static const struct of_device_id qcom_pcie_match[] = { static struct platform_driver qcom_pcie_driver = { .probe = qcom_pcie_probe, + .remove = qcom_pcie_remove, .driver = { .name = "qcom-pcie", .suppress_bind_attrs = true,
The driver does not cope with the fact that probe can fail in a number of cases after enabling pm_runtime on the device, this results in warnings about "Unbalanced pm_runtime_enable". Further more if probe fails after invoking host_init the power-domain will be left referenced. As it's not possible for the error handling in qcom_pcie_host_init() to handle errors happening after returning from that function the pm_runtime_get_sync() is moved to probe() as well. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- I'm sorry for not spotting this last week when we discussed the previous patch. drivers/pci/dwc/pcie-qcom.c | 65 ++++++++++++++++++++++++++----------- 1 file changed, 46 insertions(+), 19 deletions(-)