diff mbox series

[17/19] PCI: keystone: Add debug error message for all errors

Message ID 20181015130721.5535-18-kishon@ti.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show
Series PCI: Cleanup pci-keystone driver | expand

Commit Message

Kishon Vijay Abraham I Oct. 15, 2018, 1:07 p.m. UTC 
commit 025dd3daeda77f61a280da87ae701 ("PCI: keystone: Add error IRQ
handler") added dev_err() message only for ERR_AXI and ERR_FATAL. Add
debug error message for ERR_SYS, ERR_NONFATAL, ERR_CORR and ERR_AER here.

While at that avoid using ERR_IRQ_STATUS_RAW and use ERR_IRQ_STATUS
instead.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/pci/controller/dwc/pci-keystone.c | 33 +++++++++++++++--------
 1 file changed, 22 insertions(+), 11 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index 67646a64c895..35ad3686d4a1 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -78,8 +78,6 @@ 
 #define ERR_SYS		BIT(0)	/* System (fatal, non-fatal, or correctable) */
 #define ERR_IRQ_ALL	(ERR_AER | ERR_AXI | ERR_CORR | \
 			 ERR_NONFATAL | ERR_FATAL | ERR_SYS)
-#define ERR_FATAL_IRQ	(ERR_FATAL | ERR_AXI)
-#define ERR_IRQ_STATUS_RAW		0x1c0
 #define ERR_IRQ_STATUS			0x1c4
 #define ERR_IRQ_ENABLE_SET		0x1c8
 #define ERR_IRQ_ENABLE_CLR		0x1cc
@@ -251,18 +249,31 @@  static void ks_pcie_enable_error_irq(struct keystone_pcie *ks_pcie)
 
 static irqreturn_t ks_pcie_handle_error_irq(struct keystone_pcie *ks_pcie)
 {
-	u32 status;
+	u32 reg;
+	struct device *dev = ks_pcie->pci->dev;
+
+	reg = ks_pcie_app_readl(ks_pcie, ERR_IRQ_STATUS);
+
+	if (reg & ERR_SYS)
+		dev_err(dev, "System Error\n");
+
+	if (reg & ERR_FATAL)
+		dev_err(dev, "Fatal Error\n");
+
+	if (reg & ERR_NONFATAL)
+		dev_dbg(dev, "Non Fatal Error\n");
+
+	if (reg & ERR_CORR)
+		dev_dbg(dev, "Correctable Error\n");
+
+	if (reg & ERR_AXI)
+		dev_err(dev, "AXI tag lookup fatal Error\n");
 
-	status = ks_pcie_app_readl(ks_pcie, ERR_IRQ_STATUS_RAW) & ERR_IRQ_ALL;
-	if (!status)
-		return IRQ_NONE;
+	if (reg & ERR_AER)
+		dev_err(dev, "ECRC Error\n");
 
-	if (status & ERR_FATAL_IRQ)
-		dev_err(ks_pcie->pci->dev, "fatal error (status %#010x)\n",
-			status);
+	ks_pcie_app_writel(ks_pcie, ERR_IRQ_STATUS, reg);
 
-	/* Ack the IRQ; status bits are RW1C */
-	ks_pcie_app_writel(ks_pcie, ERR_IRQ_STATUS, status);
 	return IRQ_HANDLED;
 }