| Message ID | 20190131163856.50260-1-mika.westerberg@linux.intel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
| Series | [v4] PCI: Blacklist power management of Gigabyte X299 DESIGNARE EX PCIe ports | expand |
On Thu, Jan 31, 2019 at 07:38:56PM +0300, Mika Westerberg wrote: > Gigabyte X299 DESIGNARE EX motherboard has one PCIe root port that is > connected to an Alpine Ridge Thunderbolt controller. This port has slot > implemented bit set in the config space but other than that it is not > hotplug capable in the sense we are expecting in Linux (it has > dev->is_hotplug_bridge set to 0): > > 00:1c.4 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #5 > Bus: primary=00, secondary=05, subordinate=46, sec-latency=0 > Memory behind bridge: 78000000-8fffffff [size=384M] > Prefetchable memory behind bridge: 00003800f8000000-00003800ffffffff [size=128M] > ... > Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 > ... > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- > Slot #8, PowerLimit 25.000W; Interlock- NoCompl+ > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- > Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- > Changed: MRL- PresDet+ LinkState+ > > This system is using ACPI based hotplug to notify the OS that it needs > to rescan the PCI bus (ACPI hotplug). > > If there is nothing connected in any of the Thunderbolt ports the root > port will not have any runtime PM active children and is thus > automatically runtime suspended pretty soon after boot by PCI PM core. > Now, when a device is connected the BIOS SMI handler responsible for > enumerating newly added devices is not able to find anything because the > port is in D3. > > Prevent this from happening by blacklisting PCI power management of this > particular Gigabyte system. Since this is one of those issues we seem to have to discover experimentally, I'd like to include a URL here to a kernel.org bugzilla that has a dmesg log, "lspci -vvvnn" output, an acpidump, and anything else that might be useful to extend or generalize this in the future. Maybe dmidecode output, too? If somebody creates the bugzilla, I can add the URL; no need to repost just for that. > Reported-by: Kedar A Dongre <kedar.a.dongre@intel.com> > Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> > Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > --- > Changes from v3: > > * Added #ifdef CONFIG_X86/#endif over DMI entry as suggested by Lukas. > > v3: https://patchwork.kernel.org/patch/10778957/ > v2: https://patchwork.kernel.org/patch/10750549/ > v1: https://patchwork.kernel.org/patch/10711553/ > > drivers/pci/pci.c | 22 ++++++++++++++++++++++ > 1 file changed, 22 insertions(+) > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > index c25acace7d91..7f5385badc1b 100644 > --- a/drivers/pci/pci.c > +++ b/drivers/pci/pci.c > @@ -2501,6 +2501,25 @@ void pci_config_pm_runtime_put(struct pci_dev *pdev) > pm_runtime_put_sync(parent); > } > > +static const struct dmi_system_id bridge_d3_blacklist[] = { > +#ifdef CONFIG_X86 > + { > + /* > + * Gigabyte X299 root port is not marked as hotplug > + * capable which allows Linux to power manage it. > + * However, this confuses the BIOS SMI handler so don't > + * power manage root ports on that system. > + */ > + .ident = "X299 DESIGNARE EX-CF", > + .matches = { > + DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."), > + DMI_MATCH(DMI_BOARD_NAME, "X299 DESIGNARE EX-CF"), > + }, > + }, > +#endif > + { } > +}; > + > /** > * pci_bridge_d3_possible - Is it possible to put the bridge into D3 > * @bridge: Bridge to check > @@ -2546,6 +2565,9 @@ bool pci_bridge_d3_possible(struct pci_dev *bridge) > if (bridge->is_hotplug_bridge) > return false; > > + if (dmi_check_system(bridge_d3_blacklist)) > + return false; > + > /* > * It should be safe to put PCIe ports from 2015 or newer > * to D3. > -- > 2.20.1 >
Hi, On Thu, Feb 07, 2019 at 06:27:31PM -0600, Bjorn Helgaas wrote: > On Thu, Jan 31, 2019 at 07:38:56PM +0300, Mika Westerberg wrote: > > Gigabyte X299 DESIGNARE EX motherboard has one PCIe root port that is > > connected to an Alpine Ridge Thunderbolt controller. This port has slot > > implemented bit set in the config space but other than that it is not > > hotplug capable in the sense we are expecting in Linux (it has > > dev->is_hotplug_bridge set to 0): > > > > 00:1c.4 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #5 > > Bus: primary=00, secondary=05, subordinate=46, sec-latency=0 > > Memory behind bridge: 78000000-8fffffff [size=384M] > > Prefetchable memory behind bridge: 00003800f8000000-00003800ffffffff [size=128M] > > ... > > Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 > > ... > > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- > > Slot #8, PowerLimit 25.000W; Interlock- NoCompl+ > > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- > > Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- > > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- > > Changed: MRL- PresDet+ LinkState+ > > > > This system is using ACPI based hotplug to notify the OS that it needs > > to rescan the PCI bus (ACPI hotplug). > > > > If there is nothing connected in any of the Thunderbolt ports the root > > port will not have any runtime PM active children and is thus > > automatically runtime suspended pretty soon after boot by PCI PM core. > > Now, when a device is connected the BIOS SMI handler responsible for > > enumerating newly added devices is not able to find anything because the > > port is in D3. > > > > Prevent this from happening by blacklisting PCI power management of this > > particular Gigabyte system. > > Since this is one of those issues we seem to have to discover > experimentally, I'd like to include a URL here to a kernel.org > bugzilla that has a dmesg log, "lspci -vvvnn" output, an acpidump, and > anything else that might be useful to extend or generalize this in the > future. Maybe dmidecode output, too? > > If somebody creates the bugzilla, I can add the URL; no need to repost > just for that. Here it is: https://bugzilla.kernel.org/show_bug.cgi?id=202031
On Thu, Jan 31, 2019 at 07:38:56PM +0300, Mika Westerberg wrote: > Gigabyte X299 DESIGNARE EX motherboard has one PCIe root port that is > connected to an Alpine Ridge Thunderbolt controller. This port has slot > implemented bit set in the config space but other than that it is not > hotplug capable in the sense we are expecting in Linux (it has > dev->is_hotplug_bridge set to 0): > > 00:1c.4 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #5 > Bus: primary=00, secondary=05, subordinate=46, sec-latency=0 > Memory behind bridge: 78000000-8fffffff [size=384M] > Prefetchable memory behind bridge: 00003800f8000000-00003800ffffffff [size=128M] > ... > Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 > ... > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- > Slot #8, PowerLimit 25.000W; Interlock- NoCompl+ > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- > Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- > Changed: MRL- PresDet+ LinkState+ > > This system is using ACPI based hotplug to notify the OS that it needs > to rescan the PCI bus (ACPI hotplug). > > If there is nothing connected in any of the Thunderbolt ports the root > port will not have any runtime PM active children and is thus > automatically runtime suspended pretty soon after boot by PCI PM core. > Now, when a device is connected the BIOS SMI handler responsible for > enumerating newly added devices is not able to find anything because the > port is in D3. > > Prevent this from happening by blacklisting PCI power management of this > particular Gigabyte system. > > Reported-by: Kedar A Dongre <kedar.a.dongre@intel.com> > Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> > Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Added bugzilla URL and applied to pci/pm for v5.1, thanks! > --- > Changes from v3: > > * Added #ifdef CONFIG_X86/#endif over DMI entry as suggested by Lukas. > > v3: https://patchwork.kernel.org/patch/10778957/ > v2: https://patchwork.kernel.org/patch/10750549/ > v1: https://patchwork.kernel.org/patch/10711553/ > > drivers/pci/pci.c | 22 ++++++++++++++++++++++ > 1 file changed, 22 insertions(+) > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > index c25acace7d91..7f5385badc1b 100644 > --- a/drivers/pci/pci.c > +++ b/drivers/pci/pci.c > @@ -2501,6 +2501,25 @@ void pci_config_pm_runtime_put(struct pci_dev *pdev) > pm_runtime_put_sync(parent); > } > > +static const struct dmi_system_id bridge_d3_blacklist[] = { > +#ifdef CONFIG_X86 > + { > + /* > + * Gigabyte X299 root port is not marked as hotplug > + * capable which allows Linux to power manage it. > + * However, this confuses the BIOS SMI handler so don't > + * power manage root ports on that system. > + */ > + .ident = "X299 DESIGNARE EX-CF", > + .matches = { > + DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."), > + DMI_MATCH(DMI_BOARD_NAME, "X299 DESIGNARE EX-CF"), > + }, > + }, > +#endif > + { } > +}; > + > /** > * pci_bridge_d3_possible - Is it possible to put the bridge into D3 > * @bridge: Bridge to check > @@ -2546,6 +2565,9 @@ bool pci_bridge_d3_possible(struct pci_dev *bridge) > if (bridge->is_hotplug_bridge) > return false; > > + if (dmi_check_system(bridge_d3_blacklist)) > + return false; > + > /* > * It should be safe to put PCIe ports from 2015 or newer > * to D3. > -- > 2.20.1 >
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index c25acace7d91..7f5385badc1b 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -2501,6 +2501,25 @@ void pci_config_pm_runtime_put(struct pci_dev *pdev) pm_runtime_put_sync(parent); } +static const struct dmi_system_id bridge_d3_blacklist[] = { +#ifdef CONFIG_X86 + { + /* + * Gigabyte X299 root port is not marked as hotplug + * capable which allows Linux to power manage it. + * However, this confuses the BIOS SMI handler so don't + * power manage root ports on that system. + */ + .ident = "X299 DESIGNARE EX-CF", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co., Ltd."), + DMI_MATCH(DMI_BOARD_NAME, "X299 DESIGNARE EX-CF"), + }, + }, +#endif + { } +}; + /** * pci_bridge_d3_possible - Is it possible to put the bridge into D3 * @bridge: Bridge to check @@ -2546,6 +2565,9 @@ bool pci_bridge_d3_possible(struct pci_dev *bridge) if (bridge->is_hotplug_bridge) return false; + if (dmi_check_system(bridge_d3_blacklist)) + return false; + /* * It should be safe to put PCIe ports from 2015 or newer * to D3.
Gigabyte X299 DESIGNARE EX motherboard has one PCIe root port that is connected to an Alpine Ridge Thunderbolt controller. This port has slot implemented bit set in the config space but other than that it is not hotplug capable in the sense we are expecting in Linux (it has dev->is_hotplug_bridge set to 0): 00:1c.4 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #5 Bus: primary=00, secondary=05, subordinate=46, sec-latency=0 Memory behind bridge: 78000000-8fffffff [size=384M] Prefetchable memory behind bridge: 00003800f8000000-00003800ffffffff [size=128M] ... Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00 ... SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #8, PowerLimit 25.000W; Interlock- NoCompl+ SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet+ LinkState+ This system is using ACPI based hotplug to notify the OS that it needs to rescan the PCI bus (ACPI hotplug). If there is nothing connected in any of the Thunderbolt ports the root port will not have any runtime PM active children and is thus automatically runtime suspended pretty soon after boot by PCI PM core. Now, when a device is connected the BIOS SMI handler responsible for enumerating newly added devices is not able to find anything because the port is in D3. Prevent this from happening by blacklisting PCI power management of this particular Gigabyte system. Reported-by: Kedar A Dongre <kedar.a.dongre@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> --- Changes from v3: * Added #ifdef CONFIG_X86/#endif over DMI entry as suggested by Lukas. v3: https://patchwork.kernel.org/patch/10778957/ v2: https://patchwork.kernel.org/patch/10750549/ v1: https://patchwork.kernel.org/patch/10711553/ drivers/pci/pci.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)