[v3,3/3] PCI: microsemi: Add host driver for Microsemi PCIe controller

Commit Message

Daire McNamara Feb. 15, 2019, 4:24 p.m. UTC

This patch adds support to the Microsemi/Microchip PolarFire
PCIe controller when configured in host (Root Complex) mode.

Signed-off-by: Daire McNamara <[e-mail]>
---
 drivers/pci/controller/Kconfig          |   8 +
 drivers/pci/controller/Makefile         |   1 +
 drivers/pci/controller/pcie-microsemi.c | 764 ++++++++++++++++++++++++
 3 files changed, 773 insertions(+)
 create mode 100644 drivers/pci/controller/pcie-microsemi.c

Comments

Christoph Hellwig Feb. 16, 2019, 8:04 a.m. UTC | #1

On Fri, Feb 15, 2019 at 04:24:24PM +0000, Daire McNamara wrote:
> This patch adds support to the Microsemi/Microchip PolarFire
> PCIe controller when configured in host (Root Complex) mode.

This doesn't seem to address most of the comments in:

http://lists.infradead.org/pipermail/linux-riscv/2018-August/001058.html

or

http://lists.infradead.org/pipermail/linux-riscv/2018-August/001073.html

> 
> Signed-off-by: Daire McNamara <[e-mail]>
> ---
>  drivers/pci/controller/Kconfig          |   8 +
>  drivers/pci/controller/Makefile         |   1 +
>  drivers/pci/controller/pcie-microsemi.c | 764 ++++++++++++++++++++++++
>  3 files changed, 773 insertions(+)
>  create mode 100644 drivers/pci/controller/pcie-microsemi.c
> 
> diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
> index 6671946dbf66..31fa5e53d765 100644
> --- a/drivers/pci/controller/Kconfig
> +++ b/drivers/pci/controller/Kconfig
> @@ -280,5 +280,13 @@ config VMD
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called vmd.
>  
> +config PCIE_MICROSEMI
> +	bool "Microsemi AXI PCIe host bridge support"
> +	depends on PCI_MSI && OF
> +	help
> +	  Say 'Y' here if you want kernel to support the Microsemi AXI PCIe
> +	  Host Bridge driver.
> +
> +
>  source "drivers/pci/controller/dwc/Kconfig"
>  endmenu
> diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile
> index d56a507495c5..c3b76ff221be 100644
> --- a/drivers/pci/controller/Makefile
> +++ b/drivers/pci/controller/Makefile
> @@ -28,6 +28,7 @@ obj-$(CONFIG_PCIE_ROCKCHIP_HOST) += pcie-rockchip-host.o
>  obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o
>  obj-$(CONFIG_PCIE_MOBIVEIL) += pcie-mobiveil.o
>  obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o
> +obj-$(CONFIG_PCIE_MICROSEMI) += pcie-microsemi.o
>  obj-$(CONFIG_VMD) += vmd.o
>  # pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW
>  obj-y				+= dwc/
> diff --git a/drivers/pci/controller/pcie-microsemi.c b/drivers/pci/controller/pcie-microsemi.c
> new file mode 100644
> index 000000000000..60e185bebc60
> --- /dev/null
> +++ b/drivers/pci/controller/pcie-microsemi.c
> @@ -0,0 +1,764 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * PCIe host controller driver for Microsemi AXI PCIe Bridge
> + *
> + * Copyright (c) 2018 - 2019 Microsemi Corporation.
> + *
> + * Based on:
> + *	pcie-rcar.c
> + *	pcie-xilinx.c
> + *	pcie-altera.c
> + */
> +
> +#include <linux/bitmap.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/irqdomain.h>
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/msi.h>
> +#include <linux/of_address.h>
> +#include <linux/of_pci.h>
> +#include <linux/of_platform.h>
> +#include <linux/of_irq.h>
> +#include <linux/pci.h>
> +#include <linux/platform_device.h>
> +
> +#include "../pci.h"
> +
> +/* ECAM definitions */
> +#define ECAM_BUS_NUM_SHIFT		20
> +#define ECAM_DEV_NUM_SHIFT		12
> +
> +/* Number of MSI IRQs */
> +#define MICROSEMI_NUM_MSI_IRQS		32
> +#define MICROSEMI_NUM_MSI_IRQS_CODED	 5
> +
> +/* PCIe Bridge Phy and Controller Phy offsets */
> +#define MICROSEMI_PCIE0_BRIDGE_ADDR	0x00004000u
> +#define MICROSEMI_PCIE0_CTRL_ADDR	0x00006000u
> +
> +#define MICROSEMI_PCIE1_BRIDGE_ADDR	0x00008000u
> +#define MICROSEMI_PCIE1_CTRL_ADDR	0x0000a000u
> +
> +/* PCIe Controller Phy Regs */
> +#define MICROSEMI_SEC_ERROR_INT			0x28
> +#define SEC_ERROR_INT_TX_RAM_SEC_ERR_INT	GENMASK(3, 0)
> +#define SEC_ERROR_INT_RX_RAM_SEC_ERR_INT	GENMASK(7, 4)
> +#define SEC_ERROR_INT_PCIE2AXI_RAM_SEC_ERR_INT	GENMASK(11, 8)
> +#define SEC_ERROR_INT_AXI2PCIE_RAM_SEC_ERR_INT	GENMASK(15, 12)
> +#define MICROSEMI_SEC_ERROR_INT_MASK		0x2c
> +#define MICROSEMI_DED_ERROR_INT			0x30
> +#define DED_ERROR_INT_TX_RAM_DED_ERR_INT	GENMASK(3, 0)
> +#define DED_ERROR_INT_RX_RAM_DED_ERR_INT	GENMASK(7, 4)
> +#define DED_ERROR_INT_PCIE2AXI_RAM_DED_ERR_INT	GENMASK(11, 8)
> +#define DED_ERROR_INT_AXI2PCIE_RAM_DED_ERR_INT	GENMASK(15, 12)
> +#define MICROSEMI_DED_ERROR_INT_MASK		0x34
> +#define MICROSEMI_ECC_CONTROL			0x38
> +#define ECC_CONTROL_AXI2PCIE_RAM_ECC_BYPASS	BIT(27)
> +#define ECC_CONTROL_PCIE2AXI_RAM_ECC_BYPASS	BIT(26)
> +#define ECC_CONTROL_RX_RAM_ECC_BYPASS		BIT(25)
> +#define ECC_CONTROL_TX_RAM_ECC_BYPASS		BIT(24)
> +#define MICROSEMI_LTSSM_STATE			0x5c
> +#define MICROSEMI_LTSSM_L0_STATE		0x10
> +#define MICROSEMI_PCIE_EVENT_INT		0x14c
> +#define PCIE_EVENT_INT_L2_EXIT_INT		BIT(0)
> +#define PCIE_EVENT_INT_HOTRST_EXIT_INT		BIT(1)
> +#define PCIE_EVENT_INT_DLUP_EXIT_INT		BIT(2)
> +#define PCIE_EVENT_INT_L2_EXIT_INT_MASK		BIT(16)
> +#define PCIE_EVENT_INT_HOTRST_EXIT_INT_MASK	BIT(17)
> +#define PCIE_EVENT_INT_DLUP_EXIT_INT_MASK	BIT(18)
> +
> +/* PCIe Bridge Phy Regs */
> +#define MICROSEMI_PCIE_PCI_IDS_DW1		0x9c
> +#define MICROSEMI_IMASK_LOCAL			0x180
> +#define MICROSEMI_PCIE_LOCAL_INT_ENABLE		0x0f000000u
> +#define MICROSEMI_PCI_INTS			0x0f000000u
> +#define MICROSEMI_PM_MSI_INT_SHIFT		24
> +#define MICROSEMI_PCIE_ENABLE_MSI		0x10000000u
> +#define MICROSEMI_MSI_INT			0x10000000u
> +#define MICROSEMI_MSI_INT_SHIFT			28
> +#define MICROSEMI_ISTATUS_LOCAL			0x184
> +#define MICROSEMI_IMASK_HOST			0x188
> +#define MICROSEMI_ISTATUS_HOST			0x18c
> +#define MICROSEMI_ISTATUS_MSI			0x194
> +
> +/* PCIe AXI slave table init defines */
> +#define MICROSEMI_ATR0_AXI4_SLV0_SRCADDR_PARAM	0x800u
> +#define ATR_SIZE_SHIFT				1
> +#define ATR_IMPL_ENABLE				1
> +#define MICROSEMI_ATR0_AXI4_SLV0_SRC_ADDR	0x804u
> +#define MICROSEMI_ATR0_AXI4_SLV0_TRSL_ADDR_LSB	0x808u
> +#define MICROSEMI_ATR0_AXI4_SLV0_TRSL_ADDR_UDW	0x80cu
> +#define MICROSEMI_ATR0_AXI4_SLV0_TRSL_PARAM	0x810u
> +#define MICROSEMI_PCIE_TX_RX_INTERFACE		0x00000000u
> +#define MICROSEMI_PCIE_CONFIG_INTERFACE		0x00000001u
> +
> +#define MICROSEMI_ATR0_AXI4_SLV_SIZE		32
> +
> +/* PCIe Master table init defines */
> +#define MICROSEMI_ATR0_PCIE_WIN0_SRCADDR_31_12	0x600u
> +#define MICROSEMI_ATR0_PCIE_WIN0_SIZE		0x1f
> +#define MICROSEMI_ATR0_PCIE_WIN0_SIZE_SHIFT	1
> +#define MICROSEMI_ATR0_PCIE_WIN0_SRCADDR_63_32	0x604u
> +
> +#define MICROSEMI_MSI_MSG_ADDR			0x190u
> +
> +/* PCIe Config space MSI capability structure */
> +#define MSI_CAP_CTRL_OFFSET		0xe0u
> +#define MSI_ENABLE			(0x01u << 16)
> +#define MSI_ENABLE_MULTI		(MICROSEMI_NUM_MSI_IRQS_CODED << 20)
> +#define MSI_MSG_ADDR_OFFSET		0xe4u
> +#define MSI_MSG_UPPER_ADDR_OFFSET	0xe8u
> +#define MSI_MSG_DATA_OFFSET		0xf0u
> +
> +/**
> + * struct microsemi_pcie_port - PCIe port information
> + * @pcie_base_addr: IO Mapped Register Base
> + * @axi_base_addr: AMBA Mapped Register Base
> + * @irq: Interrupt number
> + * @root_busno: Root Bus number
> + * @dev: Device pointer
> + * @msi_domain: MSI IRQ domain pointer
> + * @leg_domain: Legacy IRQ domain pointer
> + * @resources: Bus Resources
> + */
> +struct microsemi_pcie_port {
> +	struct platform_device *pdev;
> +	void __iomem *pcie_base_addr;
> +	void __iomem *axi_base_addr;
> +	void __iomem *bridge_base_addr;
> +	void __iomem *ctrl_base_addr;
> +	int bridge;
> +	u32 irq;
> +	u8 root_busno;
> +	struct device *dev;
> +	struct irq_domain *msi_domain;
> +	struct irq_domain *leg_domain;
> +	struct list_head resources;
> +	struct mutex lock;			/* protect bitmap variable */
> +	DECLARE_BITMAP(msi_irq_in_use, MICROSEMI_NUM_MSI_IRQS);
> +};
> +
> +static inline u32 pcie_read(struct microsemi_pcie_port *port, u32 reg)
> +{
> +	return readl(port->pcie_base_addr + reg);
> +}
> +
> +static inline void pcie_write(struct microsemi_pcie_port *port,
> +			      u32 val, u32 reg)
> +{
> +	writel(val, port->pcie_base_addr + reg);
> +}
> +
> +static void microsemi_pcie_enable(struct microsemi_pcie_port *port)
> +{
> +	u32 enb;
> +
> +	enb = readl(port->bridge_base_addr + MICROSEMI_LTSSM_STATE);
> +	enb |= MICROSEMI_LTSSM_L0_STATE;
> +	writel(enb, port->bridge_base_addr + MICROSEMI_LTSSM_STATE);
> +}
> +
> +/**
> + * microsemi_pcie_valid_device - Check if a valid device is present on bus
> + * @bus: PCI Bus structure
> + * @devfn: device/function
> + *
> + * Return: 'true' on success and 'false' if invalid device is found
> + */
> +static bool microsemi_pcie_valid_device(struct pci_bus *bus, unsigned int devfn)
> +{
> +	struct microsemi_pcie_port *port = bus->sysdata;
> +
> +	/* Only one device down on each root port */
> +	if (bus->number == port->root_busno && devfn > 0)
> +		return false;
> +
> +	return true;
> +}
> +
> +/**
> + * microsemi_pcie_map_bus - Get configuration base
> + * @bus: PCI Bus structure
> + * @devfn: Device/function
> + * @where: Offset from base
> + *
> + * Return: Base address of the configuration space needed to be
> + *	 accessed.
> + */
> +static void __iomem *microsemi_pcie_map_bus(struct pci_bus *bus,
> +					    unsigned int devfn, int where)
> +{
> +	struct microsemi_pcie_port *port = bus->sysdata;
> +	int relbus;
> +
> +	if (!microsemi_pcie_valid_device(bus, devfn))
> +		return NULL;
> +
> +	relbus = (bus->number << ECAM_BUS_NUM_SHIFT) |
> +		(devfn << ECAM_DEV_NUM_SHIFT);
> +
> +	return port->pcie_base_addr + relbus + where;
> +}
> +
> +/* PCIe operations */
> +static struct pci_ops microsemi_pcie_ops = {
> +	.map_bus = microsemi_pcie_map_bus,
> +	.read	= pci_generic_config_read,
> +	.write	= pci_generic_config_write,
> +};
> +
> +/* MSI functions */
> +
> +/**
> + * microsemi_pcie_destroy_msi - Free MSI number
> + * @irq: IRQ to be freed
> + */
> +static void microsemi_pcie_destroy_msi(unsigned int irq)
> +{
> +	struct microsemi_pcie_port *port =
> +		msi_desc_to_pci_sysdata(irq_get_msi_desc(irq));
> +	irq_hw_number_t hwirq = irqd_to_hwirq(irq_get_irq_data(irq));
> +
> +	if (!port)
> +		return;
> +
> +	if (!test_bit(hwirq, port->msi_irq_in_use))
> +		dev_err(port->dev, "trying to free unused MSI%d\n", irq);
> +	else
> +		clear_bit(hwirq, port->msi_irq_in_use);
> +}
> +
> +/**
> + * microsemi_pcie_assign_msi - Allocate MSI number
> + *
> + * Return: A valid IRQ on success and error value on failure.
> + */
> +static int microsemi_pcie_assign_msi(struct microsemi_pcie_port *port)
> +{
> +	int pos;
> +
> +	mutex_lock(&port->lock);
> +	pos = find_first_zero_bit(port->msi_irq_in_use, MICROSEMI_NUM_MSI_IRQS);
> +	if (pos < MICROSEMI_NUM_MSI_IRQS) {
> +		set_bit(pos, port->msi_irq_in_use);
> +	} else {
> +		mutex_unlock(&port->lock);
> +		return -ENOSPC;
> +	}
> +
> +	mutex_unlock(&port->lock);
> +	return pos;
> +}
> +
> +/**
> + * microsemi_msi_teardown_irq - Destroy the MSI
> + * @chip: MSI Chip descriptor
> + * @irq: MSI IRQ to destroy
> + */
> +static void microsemi_msi_teardown_irq(struct msi_controller *chip,
> +				       unsigned int irq)
> +{
> +	microsemi_pcie_destroy_msi(irq);
> +	irq_dispose_mapping(irq);
> +}
> +
> +/**
> + * microsemi_pcie_msi_setup_irq - Setup MSI request
> + * @chip: MSI chip pointer
> + * @pdev: PCIe device pointer
> + * @desc: MSI descriptor pointer
> + *
> + * Return: '0' on success and error value on failure
> + */
> +static int microsemi_pcie_msi_setup_irq(struct msi_controller *chip,
> +					struct pci_dev *pdev,
> +					struct msi_desc *desc)
> +{
> +	struct microsemi_pcie_port *port = pdev->bus->sysdata;
> +	unsigned int irq;
> +	int hwirq;
> +	struct msi_msg msg;
> +
> +	hwirq = microsemi_pcie_assign_msi(port);
> +	if (hwirq < 0)
> +		return hwirq;
> +
> +	irq = irq_create_mapping(port->msi_domain, hwirq);
> +	if (!irq)
> +		return -EINVAL;
> +
> +	irq_set_msi_desc(irq, desc);
> +
> +	msg.address_hi = upper_32_bits(MICROSEMI_MSI_MSG_ADDR);
> +	msg.address_lo = lower_32_bits(MICROSEMI_MSI_MSG_ADDR);
> +	msg.data = hwirq;
> +
> +	pci_write_msi_msg(irq, &msg);
> +
> +	return 0;
> +}
> +
> +/* MSI Chip Descriptor */
> +static struct msi_controller microsemi_pcie_msi_chip = {
> +	.setup_irq = microsemi_pcie_msi_setup_irq,
> +	.teardown_irq = microsemi_msi_teardown_irq,
> +};
> +
> +/* HW Interrupt Chip Descriptor */
> +static struct irq_chip microsemi_msi_irq_chip = {
> +	.name = "Microsemi PCIe MSI",
> +	.irq_enable = pci_msi_unmask_irq,
> +	.irq_disable = pci_msi_mask_irq,
> +	.irq_mask = pci_msi_mask_irq,
> +	.irq_unmask = pci_msi_unmask_irq,
> +};
> +
> +/**
> + * microsemi_pcie_msi_map - Set the handler for the MSI and mark IRQ as valid
> + * @domain: IRQ domain
> + * @irq: Virtual IRQ number
> + * @hwirq: HW interrupt number
> + *
> + * Return: Always returns 0.
> + */
> +static int microsemi_pcie_msi_map(struct irq_domain *domain, unsigned int irq,
> +				  irq_hw_number_t hwirq)
> +{
> +	irq_set_chip_and_handler(irq, &microsemi_msi_irq_chip,
> +				 handle_simple_irq);
> +	irq_set_chip_data(irq, domain->host_data);
> +
> +	return 0;
> +}
> +
> +/* IRQ Domain operations */
> +static const struct irq_domain_ops msi_domain_ops = {
> +	.map = microsemi_pcie_msi_map,
> +};
> +
> +/**
> + * microsemi_pcie_enable_msi - Enable MSI support
> + * @port: PCIe port information
> + */
> +static void microsemi_pcie_enable_msi(struct microsemi_pcie_port *port)
> +{
> +	u32 cap_ctrl;
> +
> +	cap_ctrl = pcie_read(port, MSI_CAP_CTRL_OFFSET);
> +
> +	pcie_write(port, cap_ctrl | MSI_ENABLE_MULTI |
> +		MSI_ENABLE, MSI_CAP_CTRL_OFFSET);
> +	pcie_write(port, MICROSEMI_MSI_MSG_ADDR, MSI_MSG_ADDR_OFFSET);
> +}
> +
> +/* INTx Functions */
> +
> +/**
> + * microsemi_pcie_intx_map - Set the handler for the INTx and mark IRQ as valid
> + * @domain: IRQ domain
> + * @irq: Virtual IRQ number
> + * @hwirq: HW interrupt number
> + *
> + * Return: Always returns 0.
> + */
> +static int microsemi_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
> +				   irq_hw_number_t hwirq)
> +{
> +	irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_simple_irq);
> +	irq_set_chip_data(irq, domain->host_data);
> +
> +	return 0;
> +}
> +
> +/* INTx IRQ Domain operations */
> +static const struct irq_domain_ops intx_domain_ops = {
> +	.map = microsemi_pcie_intx_map,
> +	.xlate = pci_irqd_intx_xlate,
> +};
> +
> +/* PCIe HW Functions */
> +
> +/**
> + * microsemi_pcie_intr_handler - Interrupt Service Handler
> + * @irq: IRQ number
> + * @data: PCIe port information
> + *
> + * Return: IRQ_HANDLED on success and IRQ_NONE on failure
> + */
> +static irqreturn_t microsemi_pcie_intr_handler(int irq, void *data)
> +{
> +	struct microsemi_pcie_port *port = (struct microsemi_pcie_port *)data;
> +	struct device *dev = port->dev;
> +	unsigned long status;
> +	unsigned long msi;
> +	u32 bit;
> +	u32 virq;
> +
> +	status = readl(port->bridge_base_addr + MICROSEMI_ISTATUS_LOCAL);
> +
> +	/* Might be sharing interrupt line.  Check if interrupt is for us */
> +	if (!status)
> +		return IRQ_NONE;
> +
> +	status = (status & MICROSEMI_PCI_INTS) >> MICROSEMI_PM_MSI_INT_SHIFT;
> +	for_each_set_bit(bit, &status, PCI_NUM_INTX) {
> +		/* clear that interrupt bit */
> +		writel(1 << (bit + MICROSEMI_PM_MSI_INT_SHIFT),
> +		       port->bridge_base_addr + MICROSEMI_ISTATUS_LOCAL);
> +		virq = irq_find_mapping(port->leg_domain, bit);
> +
> +		if (virq)
> +			generic_handle_irq(virq);
> +		else
> +			dev_err(dev, "unexpected IRQ, INT%d\n", bit);
> +	}
> +
> +	status = readl(port->bridge_base_addr + MICROSEMI_ISTATUS_LOCAL);
> +	if (status & MICROSEMI_MSI_INT) {
> +		/* Clear the ISTATUS MSI bit */
> +		writel((1 << MICROSEMI_MSI_INT_SHIFT),
> +		       port->bridge_base_addr + MICROSEMI_ISTATUS_LOCAL);
> +		msi = readl(port->bridge_base_addr + MICROSEMI_ISTATUS_MSI);
> +		for_each_set_bit(bit, &msi, MICROSEMI_NUM_MSI_IRQS) {
> +			/* clear that MSI interrupt bit */
> +			writel((1 << bit),
> +			       port->bridge_base_addr + MICROSEMI_ISTATUS_MSI);
> +			virq = irq_find_mapping(port->msi_domain, bit);
> +			if (virq)
> +				generic_handle_irq(virq);
> +			else
> +				dev_err(dev, "unexpected IRQ, INT%d\n", bit);
> +		}
> +	}
> +
> +	return IRQ_HANDLED;
> +}
> +
> +/**
> + * microsemi_pcie_init_irq_domain - Initialize IRQ domain
> + * @port: PCIe port information
> + *
> + * Return: '0' on success and error value on failure
> + */
> +static int microsemi_pcie_init_irq_domain(struct microsemi_pcie_port *port)
> +{
> +	struct device *dev = port->dev;
> +	struct device_node *node = dev->of_node;
> +	struct device_node *pcie_intc_node;
> +
> +	/* Setup INTx */
> +	pcie_intc_node = of_get_next_child(node, NULL);
> +	if (!pcie_intc_node) {
> +		dev_err(dev, "no PCIe INTx node found\n");
> +		return -ENODEV;
> +	}
> +
> +	port->leg_domain = irq_domain_add_linear(pcie_intc_node, PCI_NUM_INTX,
> +						 &intx_domain_ops,
> +						 port);
> +	if (!port->leg_domain) {
> +		dev_err(dev, "failed to get a INTx IRQ domain\n");
> +		return -ENODEV;
> +	}
> +
> +	/* Setup MSI */
> +	if (IS_ENABLED(CONFIG_PCI_MSI)) {
> +		port->msi_domain =
> +			irq_domain_add_linear(node,
> +					      MICROSEMI_NUM_MSI_IRQS,
> +					      &msi_domain_ops,
> +					      &microsemi_pcie_msi_chip);
> +		if (!port->msi_domain) {
> +			dev_err(dev, "failed to get an MSI IRQ domain\n");
> +			return -ENODEV;
> +		}
> +		microsemi_pcie_enable_msi(port);
> +	}
> +
> +	/* Enable interrupts */
> +	writel(MICROSEMI_PCIE_ENABLE_MSI | MICROSEMI_PCIE_LOCAL_INT_ENABLE,
> +	       port->bridge_base_addr + MICROSEMI_IMASK_LOCAL);
> +
> +	return 0;
> +}
> +
> +/**
> + * microsemi_pcie_init_port - Parse Device tree, Initialize hardware
> + * @port: PCIe port information
> + *
> + * Return: '0' on success and error value on failure
> + */
> +static int microsemi_pcie_init_port(struct microsemi_pcie_port *port)
> +{
> +	struct device *dev = port->dev;
> +	struct device_node *node = dev->of_node;
> +	struct of_pci_range_parser parser;
> +	struct of_pci_range range;
> +	struct resource regs;
> +	struct resource regs1;
> +	resource_size_t size;
> +	u32 atr_sz;
> +	const char *type;
> +	int err;
> +	u32 val;
> +	int index = 1;
> +
> +	type = of_get_property(node, "device_type", NULL);
> +	if (!type || strcmp(type, "pci")) {
> +		dev_err(dev, "invalid \"device_type\" %s\n", type);
> +		return -EINVAL;
> +	}
> +
> +	/* Only supporting bridge 1 */
> +	port->bridge = 1;
> +
> +	mutex_init(&port->lock);
> +
> +	err = of_address_to_resource(node, 0, &regs);
> +	if (err) {
> +		dev_err(dev, "missing \"reg\" property\n");
> +		return err;
> +	}
> +
> +	port->pcie_base_addr = devm_pci_remap_cfg_resource(dev, &regs);
> +	if (IS_ERR(port->pcie_base_addr))
> +		return PTR_ERR(port->pcie_base_addr);
> +
> +	err = of_address_to_resource(node, 1, &regs1);
> +	if (err) {
> +		dev_err(dev, "missing \"reg\" property\n");
> +		return err;
> +	}
> +
> +	port->axi_base_addr = devm_ioremap_resource(dev, &regs1);
> +	if (IS_ERR(port->axi_base_addr))
> +		return PTR_ERR(port->axi_base_addr);
> +
> +	if (port->bridge == 0) {
> +		port->bridge_base_addr = port->axi_base_addr
> +			+ MICROSEMI_PCIE0_BRIDGE_ADDR;
> +		port->ctrl_base_addr = port->axi_base_addr
> +			+ MICROSEMI_PCIE0_CTRL_ADDR;
> +	} else {
> +		port->bridge_base_addr = port->axi_base_addr
> +			+ MICROSEMI_PCIE1_BRIDGE_ADDR;
> +		port->ctrl_base_addr = port->axi_base_addr
> +			+ MICROSEMI_PCIE1_CTRL_ADDR;
> +	}
> +
> +	port->irq = irq_of_parse_and_map(node, 0);
> +
> +	err = devm_request_irq(dev, port->irq, microsemi_pcie_intr_handler,
> +			       IRQF_SHARED | IRQF_NO_THREAD,
> +			       "microsemi-pcie", port);
> +	if (err) {
> +		dev_err(dev, "unable to request IRQ%d\n", port->irq);
> +		return err;
> +	}
> +
> +	microsemi_pcie_enable(port);
> +
> +	/* Clear and Disable interrupts */
> +	val = ECC_CONTROL_AXI2PCIE_RAM_ECC_BYPASS
> +		| ECC_CONTROL_PCIE2AXI_RAM_ECC_BYPASS
> +		| ECC_CONTROL_RX_RAM_ECC_BYPASS
> +		| ECC_CONTROL_TX_RAM_ECC_BYPASS;
> +	writel(val, port->ctrl_base_addr + MICROSEMI_ECC_CONTROL);
> +
> +	val = PCIE_EVENT_INT_L2_EXIT_INT
> +		| PCIE_EVENT_INT_HOTRST_EXIT_INT
> +		| PCIE_EVENT_INT_DLUP_EXIT_INT
> +		| PCIE_EVENT_INT_L2_EXIT_INT_MASK
> +		| PCIE_EVENT_INT_HOTRST_EXIT_INT_MASK
> +		| PCIE_EVENT_INT_DLUP_EXIT_INT_MASK;
> +	writel(val, port->ctrl_base_addr + MICROSEMI_PCIE_EVENT_INT);
> +
> +	val = SEC_ERROR_INT_TX_RAM_SEC_ERR_INT
> +		| SEC_ERROR_INT_RX_RAM_SEC_ERR_INT
> +		| SEC_ERROR_INT_PCIE2AXI_RAM_SEC_ERR_INT
> +		| SEC_ERROR_INT_AXI2PCIE_RAM_SEC_ERR_INT;
> +	writel(val, port->ctrl_base_addr + MICROSEMI_SEC_ERROR_INT);
> +	writel(val, port->ctrl_base_addr + MICROSEMI_SEC_ERROR_INT_MASK);
> +
> +	val = DED_ERROR_INT_TX_RAM_DED_ERR_INT
> +		| DED_ERROR_INT_RX_RAM_DED_ERR_INT
> +		| DED_ERROR_INT_PCIE2AXI_RAM_DED_ERR_INT
> +		| DED_ERROR_INT_AXI2PCIE_RAM_DED_ERR_INT;
> +	writel(val, port->ctrl_base_addr + MICROSEMI_DED_ERROR_INT);
> +	writel(val, port->ctrl_base_addr + MICROSEMI_DED_ERROR_INT_MASK);
> +
> +	writel(0x00000000, port->bridge_base_addr + MICROSEMI_IMASK_LOCAL);
> +	writel(GENMASK(31, 0),
> +	       port->bridge_base_addr + MICROSEMI_ISTATUS_LOCAL);
> +	writel(0x00000000, port->bridge_base_addr + MICROSEMI_IMASK_HOST);
> +	writel(GENMASK(31, 0), port->bridge_base_addr + MICROSEMI_ISTATUS_HOST);
> +
> +	/* Configure Address Translation Table 0 for PCIe config space */
> +	writel(MICROSEMI_PCIE_CONFIG_INTERFACE,
> +	       port->bridge_base_addr + MICROSEMI_ATR0_AXI4_SLV0_TRSL_PARAM);
> +
> +	size = resource_size(&regs);
> +
> +	atr_sz = find_first_bit((const unsigned long *)&size, 64) - 1;
> +
> +	writel(lower_32_bits(regs.start)
> +		| atr_sz << ATR_SIZE_SHIFT | ATR_IMPL_ENABLE,
> +		port->bridge_base_addr
> +		+ MICROSEMI_ATR0_AXI4_SLV0_SRCADDR_PARAM);
> +
> +	writel(lower_32_bits(regs.start),
> +	       port->bridge_base_addr + MICROSEMI_ATR0_AXI4_SLV0_TRSL_ADDR_LSB);
> +
> +	if (of_pci_range_parser_init(&parser, node)) {
> +		dev_err(dev, "missing \"ranges\" property\n");
> +		return -EINVAL;
> +	}
> +
> +	for_each_of_pci_range(&parser, &range) {
> +		switch (range.flags & IORESOURCE_TYPE_BITS) {
> +		case IORESOURCE_MEM:
> +			size = range.size;
> +			atr_sz =
> +				find_first_bit((const unsigned long *)&size, 64)
> +				- 1;
> +
> +			/* Configure Address Translation Table index for PCIe
> +			 * mem space
> +			 */
> +			writel(MICROSEMI_PCIE_TX_RX_INTERFACE,
> +			       port->bridge_base_addr
> +				+ (index * MICROSEMI_ATR0_AXI4_SLV_SIZE)
> +				+ MICROSEMI_ATR0_AXI4_SLV0_TRSL_PARAM);
> +
> +			writel(lower_32_bits(range.cpu_addr)
> +				| (atr_sz << ATR_SIZE_SHIFT)
> +				| ATR_IMPL_ENABLE,
> +				port->bridge_base_addr
> +				+ (index * MICROSEMI_ATR0_AXI4_SLV_SIZE)
> +				+ MICROSEMI_ATR0_AXI4_SLV0_SRCADDR_PARAM);
> +
> +			writel(lower_32_bits(range.pci_addr),
> +			       port->bridge_base_addr
> +				+ (index * MICROSEMI_ATR0_AXI4_SLV_SIZE)
> +				+ MICROSEMI_ATR0_AXI4_SLV0_TRSL_ADDR_LSB);
> +
> +			break;
> +		}
> +		index++;
> +	}
> +
> +	writel(readl(port->bridge_base_addr
> +		+ MICROSEMI_ATR0_PCIE_WIN0_SRCADDR_31_12)
> +		| (MICROSEMI_ATR0_PCIE_WIN0_SIZE
> +		<< MICROSEMI_ATR0_PCIE_WIN0_SIZE_SHIFT),
> +		port->bridge_base_addr +
> +		MICROSEMI_ATR0_PCIE_WIN0_SRCADDR_31_12);
> +
> +	writel(0x0,
> +	       port->bridge_base_addr + MICROSEMI_ATR0_PCIE_WIN0_SRCADDR_63_32);
> +
> +	writel((readl(port->bridge_base_addr + MICROSEMI_PCIE_PCI_IDS_DW1)
> +		& 0xffff)
> +		| (PCI_CLASS_BRIDGE_PCI << 16),
> +		port->bridge_base_addr + MICROSEMI_PCIE_PCI_IDS_DW1);
> +
> +	return 0;
> +}
> +
> +/**
> + * microsemi_pcie_probe - Probe function
> + * @pdev: Platform device pointer
> + *
> + * Return: '0' on success and error value on failure
> + */
> +static int microsemi_pcie_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct microsemi_pcie_port *port;
> +	struct pci_bus *bus, *child;
> +	struct pci_host_bridge *bridge;
> +	int err;
> +	resource_size_t iobase = 0;
> +	LIST_HEAD(res);
> +
> +	if (!dev->of_node)
> +		return -ENODEV;
> +
> +	bridge = devm_pci_alloc_host_bridge(dev, sizeof(*port));
> +	if (!bridge)
> +		return -ENODEV;
> +
> +	port = pci_host_bridge_priv(bridge);
> +
> +	port->dev = dev;
> +	port->pdev = pdev;
> +
> +	err = microsemi_pcie_init_port(port);
> +	if (err) {
> +		dev_err(dev, "PCIe port initialization failed\n");
> +		return err;
> +	}
> +
> +	err = microsemi_pcie_init_irq_domain(port);
> +	if (err) {
> +		dev_err(dev, "failed creating IRQ domain\n");
> +		return err;
> +	}
> +
> +	err = devm_of_pci_get_host_bridge_resources(dev, 0, 0xff, &res,
> +						    &iobase);
> +	if (err) {
> +		dev_err(dev, "getting bridge resources failed\n");
> +		return err;
> +	}
> +
> +	err = devm_request_pci_bus_resources(dev, &res);
> +	if (err)
> +		goto error;
> +
> +	list_splice_init(&res, &bridge->windows);
> +	bridge->dev.parent = dev;
> +	bridge->sysdata = port;
> +	bridge->busnr = 0;
> +	bridge->ops = &microsemi_pcie_ops;
> +	bridge->map_irq = of_irq_parse_and_map_pci;
> +	bridge->swizzle_irq = pci_common_swizzle;
> +
> +#ifdef CONFIG_PCI_MSI
> +	microsemi_pcie_msi_chip.dev = dev;
> +	bridge->msi = &microsemi_pcie_msi_chip;
> +#endif
> +	err = pci_scan_root_bus_bridge(bridge);
> +	if (err < 0)
> +		goto error;
> +
> +	bus = bridge->bus;
> +
> +	pci_assign_unassigned_bus_resources(bus);
> +	list_for_each_entry(child, &bus->children, node)
> +		pcie_bus_configure_settings(child);
> +	pci_bus_add_devices(bus);
> +
> +	return 0;
> +
> +error:
> +	pci_free_resource_list(&res);
> +	return err;
> +}
> +
> +static const struct of_device_id microsemi_pcie_of_match[] = {
> +	{ .compatible = "microsemi,ms-pf-axi-pcie-host", },
> +	{}
> +};
> +
> +static struct platform_driver microsemi_pcie_driver = {
> +	.driver = {
> +		.name = "microsemi-pcie",
> +		.of_match_table = microsemi_pcie_of_match,
> +		.suppress_bind_attrs = true,
> +	},
> +	.probe = microsemi_pcie_probe,
> +};
> +builtin_platform_driver(microsemi_pcie_driver);
> -- 
> 2.17.0
> 
---end quoted text---

Lorenzo Pieralisi April 2, 2019, 6:23 p.m. UTC | #2

On Fri, Feb 15, 2019 at 04:24:24PM +0000, Daire McNamara wrote:
> This patch adds support to the Microsemi/Microchip PolarFire
> PCIe controller when configured in host (Root Complex) mode.
> 
> Signed-off-by: Daire McNamara <[e-mail]>
> ---
>  drivers/pci/controller/Kconfig          |   8 +
>  drivers/pci/controller/Makefile         |   1 +
>  drivers/pci/controller/pcie-microsemi.c | 764 ++++++++++++++++++++++++
>  3 files changed, 773 insertions(+)
>  create mode 100644 drivers/pci/controller/pcie-microsemi.c
> 
> diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
> index 6671946dbf66..31fa5e53d765 100644
> --- a/drivers/pci/controller/Kconfig
> +++ b/drivers/pci/controller/Kconfig
> @@ -280,5 +280,13 @@ config VMD
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called vmd.
>  
> +config PCIE_MICROSEMI
> +	bool "Microsemi AXI PCIe host bridge support"
> +	depends on PCI_MSI && OF

There is no dependency on PCI_MSI.

> +	help
> +	  Say 'Y' here if you want kernel to support the Microsemi AXI PCIe
> +	  Host Bridge driver.
> +
> +
>  source "drivers/pci/controller/dwc/Kconfig"
>  endmenu
> diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile
> index d56a507495c5..c3b76ff221be 100644
> --- a/drivers/pci/controller/Makefile
> +++ b/drivers/pci/controller/Makefile
> @@ -28,6 +28,7 @@ obj-$(CONFIG_PCIE_ROCKCHIP_HOST) += pcie-rockchip-host.o
>  obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o
>  obj-$(CONFIG_PCIE_MOBIVEIL) += pcie-mobiveil.o
>  obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o
> +obj-$(CONFIG_PCIE_MICROSEMI) += pcie-microsemi.o
>  obj-$(CONFIG_VMD) += vmd.o
>  # pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW
>  obj-y				+= dwc/
> diff --git a/drivers/pci/controller/pcie-microsemi.c b/drivers/pci/controller/pcie-microsemi.c
> new file mode 100644
> index 000000000000..60e185bebc60
> --- /dev/null
> +++ b/drivers/pci/controller/pcie-microsemi.c
> @@ -0,0 +1,764 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * PCIe host controller driver for Microsemi AXI PCIe Bridge
> + *
> + * Copyright (c) 2018 - 2019 Microsemi Corporation.
> + *
> + * Based on:
> + *	pcie-rcar.c
> + *	pcie-xilinx.c
> + *	pcie-altera.c

Not the most up to date examples in terms of kernel APIs, more below.

> + */
> +
> +#include <linux/bitmap.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/irqdomain.h>
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/msi.h>
> +#include <linux/of_address.h>
> +#include <linux/of_pci.h>
> +#include <linux/of_platform.h>
> +#include <linux/of_irq.h>
> +#include <linux/pci.h>
> +#include <linux/platform_device.h>

Alphabetical order please.

> +
> +#include "../pci.h"
> +
> +/* ECAM definitions */
> +#define ECAM_BUS_NUM_SHIFT		20
> +#define ECAM_DEV_NUM_SHIFT		12
> +
> +/* Number of MSI IRQs */
> +#define MICROSEMI_NUM_MSI_IRQS		32
> +#define MICROSEMI_NUM_MSI_IRQS_CODED	 5
> +
> +/* PCIe Bridge Phy and Controller Phy offsets */
> +#define MICROSEMI_PCIE0_BRIDGE_ADDR	0x00004000u
> +#define MICROSEMI_PCIE0_CTRL_ADDR	0x00006000u
> +
> +#define MICROSEMI_PCIE1_BRIDGE_ADDR	0x00008000u
> +#define MICROSEMI_PCIE1_CTRL_ADDR	0x0000a000u
> +
> +/* PCIe Controller Phy Regs */
> +#define MICROSEMI_SEC_ERROR_INT			0x28
> +#define SEC_ERROR_INT_TX_RAM_SEC_ERR_INT	GENMASK(3, 0)
> +#define SEC_ERROR_INT_RX_RAM_SEC_ERR_INT	GENMASK(7, 4)
> +#define SEC_ERROR_INT_PCIE2AXI_RAM_SEC_ERR_INT	GENMASK(11, 8)
> +#define SEC_ERROR_INT_AXI2PCIE_RAM_SEC_ERR_INT	GENMASK(15, 12)
> +#define MICROSEMI_SEC_ERROR_INT_MASK		0x2c
> +#define MICROSEMI_DED_ERROR_INT			0x30
> +#define DED_ERROR_INT_TX_RAM_DED_ERR_INT	GENMASK(3, 0)
> +#define DED_ERROR_INT_RX_RAM_DED_ERR_INT	GENMASK(7, 4)
> +#define DED_ERROR_INT_PCIE2AXI_RAM_DED_ERR_INT	GENMASK(11, 8)
> +#define DED_ERROR_INT_AXI2PCIE_RAM_DED_ERR_INT	GENMASK(15, 12)
> +#define MICROSEMI_DED_ERROR_INT_MASK		0x34
> +#define MICROSEMI_ECC_CONTROL			0x38
> +#define ECC_CONTROL_AXI2PCIE_RAM_ECC_BYPASS	BIT(27)
> +#define ECC_CONTROL_PCIE2AXI_RAM_ECC_BYPASS	BIT(26)
> +#define ECC_CONTROL_RX_RAM_ECC_BYPASS		BIT(25)
> +#define ECC_CONTROL_TX_RAM_ECC_BYPASS		BIT(24)
> +#define MICROSEMI_LTSSM_STATE			0x5c
> +#define MICROSEMI_LTSSM_L0_STATE		0x10
> +#define MICROSEMI_PCIE_EVENT_INT		0x14c
> +#define PCIE_EVENT_INT_L2_EXIT_INT		BIT(0)
> +#define PCIE_EVENT_INT_HOTRST_EXIT_INT		BIT(1)
> +#define PCIE_EVENT_INT_DLUP_EXIT_INT		BIT(2)
> +#define PCIE_EVENT_INT_L2_EXIT_INT_MASK		BIT(16)
> +#define PCIE_EVENT_INT_HOTRST_EXIT_INT_MASK	BIT(17)
> +#define PCIE_EVENT_INT_DLUP_EXIT_INT_MASK	BIT(18)
> +
> +/* PCIe Bridge Phy Regs */
> +#define MICROSEMI_PCIE_PCI_IDS_DW1		0x9c
> +#define MICROSEMI_IMASK_LOCAL			0x180
> +#define MICROSEMI_PCIE_LOCAL_INT_ENABLE		0x0f000000u
> +#define MICROSEMI_PCI_INTS			0x0f000000u
> +#define MICROSEMI_PM_MSI_INT_SHIFT		24
> +#define MICROSEMI_PCIE_ENABLE_MSI		0x10000000u
> +#define MICROSEMI_MSI_INT			0x10000000u
> +#define MICROSEMI_MSI_INT_SHIFT			28
> +#define MICROSEMI_ISTATUS_LOCAL			0x184
> +#define MICROSEMI_IMASK_HOST			0x188
> +#define MICROSEMI_ISTATUS_HOST			0x18c
> +#define MICROSEMI_ISTATUS_MSI			0x194

If you use BIT and GENMASK either you use them everywhere or you
do not use them at all.

> +
> +/* PCIe AXI slave table init defines */
> +#define MICROSEMI_ATR0_AXI4_SLV0_SRCADDR_PARAM	0x800u
> +#define ATR_SIZE_SHIFT				1
> +#define ATR_IMPL_ENABLE				1
> +#define MICROSEMI_ATR0_AXI4_SLV0_SRC_ADDR	0x804u
> +#define MICROSEMI_ATR0_AXI4_SLV0_TRSL_ADDR_LSB	0x808u
> +#define MICROSEMI_ATR0_AXI4_SLV0_TRSL_ADDR_UDW	0x80cu
> +#define MICROSEMI_ATR0_AXI4_SLV0_TRSL_PARAM	0x810u
> +#define MICROSEMI_PCIE_TX_RX_INTERFACE		0x00000000u
> +#define MICROSEMI_PCIE_CONFIG_INTERFACE		0x00000001u
> +
> +#define MICROSEMI_ATR0_AXI4_SLV_SIZE		32
> +
> +/* PCIe Master table init defines */
> +#define MICROSEMI_ATR0_PCIE_WIN0_SRCADDR_31_12	0x600u
> +#define MICROSEMI_ATR0_PCIE_WIN0_SIZE		0x1f
> +#define MICROSEMI_ATR0_PCIE_WIN0_SIZE_SHIFT	1
> +#define MICROSEMI_ATR0_PCIE_WIN0_SRCADDR_63_32	0x604u
> +
> +#define MICROSEMI_MSI_MSG_ADDR			0x190u
> +
> +/* PCIe Config space MSI capability structure */
> +#define MSI_CAP_CTRL_OFFSET		0xe0u
> +#define MSI_ENABLE			(0x01u << 16)
> +#define MSI_ENABLE_MULTI		(MICROSEMI_NUM_MSI_IRQS_CODED << 20)
> +#define MSI_MSG_ADDR_OFFSET		0xe4u
> +#define MSI_MSG_UPPER_ADDR_OFFSET	0xe8u
> +#define MSI_MSG_DATA_OFFSET		0xf0u
> +
> +/**
> + * struct microsemi_pcie_port - PCIe port information
> + * @pcie_base_addr: IO Mapped Register Base
> + * @axi_base_addr: AMBA Mapped Register Base
> + * @irq: Interrupt number
> + * @root_busno: Root Bus number
> + * @dev: Device pointer
> + * @msi_domain: MSI IRQ domain pointer
> + * @leg_domain: Legacy IRQ domain pointer
> + * @resources: Bus Resources
> + */
> +struct microsemi_pcie_port {
> +	struct platform_device *pdev;
> +	void __iomem *pcie_base_addr;
> +	void __iomem *axi_base_addr;
> +	void __iomem *bridge_base_addr;
> +	void __iomem *ctrl_base_addr;
> +	int bridge;
> +	u32 irq;
> +	u8 root_busno;
> +	struct device *dev;
> +	struct irq_domain *msi_domain;
> +	struct irq_domain *leg_domain;
> +	struct list_head resources;
> +	struct mutex lock;			/* protect bitmap variable */
> +	DECLARE_BITMAP(msi_irq_in_use, MICROSEMI_NUM_MSI_IRQS);
> +};
> +
> +static inline u32 pcie_read(struct microsemi_pcie_port *port, u32 reg)
> +{
> +	return readl(port->pcie_base_addr + reg);
> +}
> +
> +static inline void pcie_write(struct microsemi_pcie_port *port,
> +			      u32 val, u32 reg)
> +{
> +	writel(val, port->pcie_base_addr + reg);
> +}
> +
> +static void microsemi_pcie_enable(struct microsemi_pcie_port *port)
> +{
> +	u32 enb;
> +
> +	enb = readl(port->bridge_base_addr + MICROSEMI_LTSSM_STATE);
> +	enb |= MICROSEMI_LTSSM_L0_STATE;
> +	writel(enb, port->bridge_base_addr + MICROSEMI_LTSSM_STATE);
> +}
> +
> +/**
> + * microsemi_pcie_valid_device - Check if a valid device is present on bus
> + * @bus: PCI Bus structure
> + * @devfn: device/function
> + *
> + * Return: 'true' on success and 'false' if invalid device is found
> + */
> +static bool microsemi_pcie_valid_device(struct pci_bus *bus, unsigned int devfn)
> +{
> +	struct microsemi_pcie_port *port = bus->sysdata;
> +
> +	/* Only one device down on each root port */
> +	if (bus->number == port->root_busno && devfn > 0)
> +		return false;
> +
> +	return true;
> +}
> +
> +/**
> + * microsemi_pcie_map_bus - Get configuration base
> + * @bus: PCI Bus structure
> + * @devfn: Device/function
> + * @where: Offset from base
> + *
> + * Return: Base address of the configuration space needed to be
> + *	 accessed.
> + */
> +static void __iomem *microsemi_pcie_map_bus(struct pci_bus *bus,
> +					    unsigned int devfn, int where)
> +{
> +	struct microsemi_pcie_port *port = bus->sysdata;
> +	int relbus;
> +
> +	if (!microsemi_pcie_valid_device(bus, devfn))
> +		return NULL;
> +
> +	relbus = (bus->number << ECAM_BUS_NUM_SHIFT) |
> +		(devfn << ECAM_DEV_NUM_SHIFT);
> +
> +	return port->pcie_base_addr + relbus + where;
> +}
> +
> +/* PCIe operations */
> +static struct pci_ops microsemi_pcie_ops = {
> +	.map_bus = microsemi_pcie_map_bus,
> +	.read	= pci_generic_config_read,
> +	.write	= pci_generic_config_write,
> +};
> +
> +/* MSI functions */
> +
> +/**
> + * microsemi_pcie_destroy_msi - Free MSI number
> + * @irq: IRQ to be freed
> + */
> +static void microsemi_pcie_destroy_msi(unsigned int irq)
> +{
> +	struct microsemi_pcie_port *port =
> +		msi_desc_to_pci_sysdata(irq_get_msi_desc(irq));
> +	irq_hw_number_t hwirq = irqd_to_hwirq(irq_get_irq_data(irq));
> +
> +	if (!port)
> +		return;
> +
> +	if (!test_bit(hwirq, port->msi_irq_in_use))
> +		dev_err(port->dev, "trying to free unused MSI%d\n", irq);
> +	else
> +		clear_bit(hwirq, port->msi_irq_in_use);

Locking ?

> +}
> +
> +/**
> + * microsemi_pcie_assign_msi - Allocate MSI number
> + *
> + * Return: A valid IRQ on success and error value on failure.
> + */
> +static int microsemi_pcie_assign_msi(struct microsemi_pcie_port *port)
> +{
> +	int pos;
> +
> +	mutex_lock(&port->lock);
> +	pos = find_first_zero_bit(port->msi_irq_in_use, MICROSEMI_NUM_MSI_IRQS);
> +	if (pos < MICROSEMI_NUM_MSI_IRQS) {
> +		set_bit(pos, port->msi_irq_in_use);
> +	} else {
> +		mutex_unlock(&port->lock);
> +		return -ENOSPC;
> +	}
> +
> +	mutex_unlock(&port->lock);
> +	return pos;
> +}
> +
> +/**
> + * microsemi_msi_teardown_irq - Destroy the MSI
> + * @chip: MSI Chip descriptor
> + * @irq: MSI IRQ to destroy
> + */
> +static void microsemi_msi_teardown_irq(struct msi_controller *chip,
> +				       unsigned int irq)
> +{
> +	microsemi_pcie_destroy_msi(irq);
> +	irq_dispose_mapping(irq);
> +}
> +
> +/**
> + * microsemi_pcie_msi_setup_irq - Setup MSI request
> + * @chip: MSI chip pointer
> + * @pdev: PCIe device pointer
> + * @desc: MSI descriptor pointer
> + *
> + * Return: '0' on success and error value on failure
> + */
> +static int microsemi_pcie_msi_setup_irq(struct msi_controller *chip,
> +					struct pci_dev *pdev,
> +					struct msi_desc *desc)
> +{
> +	struct microsemi_pcie_port *port = pdev->bus->sysdata;
> +	unsigned int irq;
> +	int hwirq;
> +	struct msi_msg msg;
> +
> +	hwirq = microsemi_pcie_assign_msi(port);
> +	if (hwirq < 0)
> +		return hwirq;
> +
> +	irq = irq_create_mapping(port->msi_domain, hwirq);
> +	if (!irq)
> +		return -EINVAL;
> +
> +	irq_set_msi_desc(irq, desc);
> +
> +	msg.address_hi = upper_32_bits(MICROSEMI_MSI_MSG_ADDR);
> +	msg.address_lo = lower_32_bits(MICROSEMI_MSI_MSG_ADDR);
> +	msg.data = hwirq;
> +
> +	pci_write_msi_msg(irq, &msg);
> +
> +	return 0;
> +}
> +
> +/* MSI Chip Descriptor */
> +static struct msi_controller microsemi_pcie_msi_chip = {
> +	.setup_irq = microsemi_pcie_msi_setup_irq,
> +	.teardown_irq = microsemi_msi_teardown_irq,
> +};

Usage of struct msi_controller is deprecated, you could not
know, no worries, more below.

> +/* HW Interrupt Chip Descriptor */
> +static struct irq_chip microsemi_msi_irq_chip = {
> +	.name = "Microsemi PCIe MSI",
> +	.irq_enable = pci_msi_unmask_irq,
> +	.irq_disable = pci_msi_mask_irq,
> +	.irq_mask = pci_msi_mask_irq,
> +	.irq_unmask = pci_msi_unmask_irq,
> +};
> +
> +/**
> + * microsemi_pcie_msi_map - Set the handler for the MSI and mark IRQ as valid
> + * @domain: IRQ domain
> + * @irq: Virtual IRQ number
> + * @hwirq: HW interrupt number
> + *
> + * Return: Always returns 0.
> + */
> +static int microsemi_pcie_msi_map(struct irq_domain *domain, unsigned int irq,
> +				  irq_hw_number_t hwirq)
> +{
> +	irq_set_chip_and_handler(irq, &microsemi_msi_irq_chip,
> +				 handle_simple_irq);
> +	irq_set_chip_data(irq, domain->host_data);
> +
> +	return 0;
> +}
> +
> +/* IRQ Domain operations */
> +static const struct irq_domain_ops msi_domain_ops = {
> +	.map = microsemi_pcie_msi_map,
> +};
> +
> +/**
> + * microsemi_pcie_enable_msi - Enable MSI support
> + * @port: PCIe port information
> + */
> +static void microsemi_pcie_enable_msi(struct microsemi_pcie_port *port)
> +{
> +	u32 cap_ctrl;
> +
> +	cap_ctrl = pcie_read(port, MSI_CAP_CTRL_OFFSET);
> +
> +	pcie_write(port, cap_ctrl | MSI_ENABLE_MULTI |
> +		MSI_ENABLE, MSI_CAP_CTRL_OFFSET);
> +	pcie_write(port, MICROSEMI_MSI_MSG_ADDR, MSI_MSG_ADDR_OFFSET);
> +}

Please rewrite MSI support following:

drivers/pci/controller/pcie-tango.c

It was heavily debated and it shows how to implement MSI through
IRQ domains, if you have questions ask them.

> +/* INTx Functions */
> +
> +/**
> + * microsemi_pcie_intx_map - Set the handler for the INTx and mark IRQ as valid
> + * @domain: IRQ domain
> + * @irq: Virtual IRQ number
> + * @hwirq: HW interrupt number
> + *
> + * Return: Always returns 0.
> + */
> +static int microsemi_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
> +				   irq_hw_number_t hwirq)
> +{
> +	irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_simple_irq);
> +	irq_set_chip_data(irq, domain->host_data);
> +
> +	return 0;
> +}
> +
> +/* INTx IRQ Domain operations */
> +static const struct irq_domain_ops intx_domain_ops = {
> +	.map = microsemi_pcie_intx_map,
> +	.xlate = pci_irqd_intx_xlate,

No need for .xlate callback, see my comment on DT bindings.

For INTX handling please have a look at:

drivers/pci/controller/pci-ftpci100.c

Same as above for questions.

> +};
> +
> +/* PCIe HW Functions */
> +
> +/**
> + * microsemi_pcie_intr_handler - Interrupt Service Handler
> + * @irq: IRQ number
> + * @data: PCIe port information
> + *
> + * Return: IRQ_HANDLED on success and IRQ_NONE on failure
> + */
> +static irqreturn_t microsemi_pcie_intr_handler(int irq, void *data)
> +{
> +	struct microsemi_pcie_port *port = (struct microsemi_pcie_port *)data;
> +	struct device *dev = port->dev;
> +	unsigned long status;
> +	unsigned long msi;
> +	u32 bit;
> +	u32 virq;
> +
> +	status = readl(port->bridge_base_addr + MICROSEMI_ISTATUS_LOCAL);
> +
> +	/* Might be sharing interrupt line.  Check if interrupt is for us */
> +	if (!status)
> +		return IRQ_NONE;
> +
> +	status = (status & MICROSEMI_PCI_INTS) >> MICROSEMI_PM_MSI_INT_SHIFT;
> +	for_each_set_bit(bit, &status, PCI_NUM_INTX) {
> +		/* clear that interrupt bit */
> +		writel(1 << (bit + MICROSEMI_PM_MSI_INT_SHIFT),
> +		       port->bridge_base_addr + MICROSEMI_ISTATUS_LOCAL);
> +		virq = irq_find_mapping(port->leg_domain, bit);
> +
> +		if (virq)
> +			generic_handle_irq(virq);
> +		else
> +			dev_err(dev, "unexpected IRQ, INT%d\n", bit);
> +	}
> +
> +	status = readl(port->bridge_base_addr + MICROSEMI_ISTATUS_LOCAL);
> +	if (status & MICROSEMI_MSI_INT) {
> +		/* Clear the ISTATUS MSI bit */
> +		writel((1 << MICROSEMI_MSI_INT_SHIFT),
> +		       port->bridge_base_addr + MICROSEMI_ISTATUS_LOCAL);
> +		msi = readl(port->bridge_base_addr + MICROSEMI_ISTATUS_MSI);
> +		for_each_set_bit(bit, &msi, MICROSEMI_NUM_MSI_IRQS) {
> +			/* clear that MSI interrupt bit */
> +			writel((1 << bit),
> +			       port->bridge_base_addr + MICROSEMI_ISTATUS_MSI);
> +			virq = irq_find_mapping(port->msi_domain, bit);
> +			if (virq)
> +				generic_handle_irq(virq);
> +			else
> +				dev_err(dev, "unexpected IRQ, INT%d\n", bit);
> +		}
> +	}
> +
> +	return IRQ_HANDLED;
> +}

This is not how the cascaded IRQ should be handled, this is an IRQ
action, again have a look at the drivers above and get back to us
with questions.

> +
> +/**
> + * microsemi_pcie_init_irq_domain - Initialize IRQ domain
> + * @port: PCIe port information
> + *
> + * Return: '0' on success and error value on failure
> + */
> +static int microsemi_pcie_init_irq_domain(struct microsemi_pcie_port *port)
> +{
> +	struct device *dev = port->dev;
> +	struct device_node *node = dev->of_node;
> +	struct device_node *pcie_intc_node;
> +
> +	/* Setup INTx */
> +	pcie_intc_node = of_get_next_child(node, NULL);
> +	if (!pcie_intc_node) {
> +		dev_err(dev, "no PCIe INTx node found\n");
> +		return -ENODEV;
> +	}
> +
> +	port->leg_domain = irq_domain_add_linear(pcie_intc_node, PCI_NUM_INTX,
> +						 &intx_domain_ops,
> +						 port);
> +	if (!port->leg_domain) {
> +		dev_err(dev, "failed to get a INTx IRQ domain\n");
> +		return -ENODEV;
> +	}
> +
> +	/* Setup MSI */
> +	if (IS_ENABLED(CONFIG_PCI_MSI)) {
> +		port->msi_domain =
> +			irq_domain_add_linear(node,
> +					      MICROSEMI_NUM_MSI_IRQS,
> +					      &msi_domain_ops,
> +					      &microsemi_pcie_msi_chip);
> +		if (!port->msi_domain) {
> +			dev_err(dev, "failed to get an MSI IRQ domain\n");
> +			return -ENODEV;
> +		}
> +		microsemi_pcie_enable_msi(port);
> +	}
> +
> +	/* Enable interrupts */
> +	writel(MICROSEMI_PCIE_ENABLE_MSI | MICROSEMI_PCIE_LOCAL_INT_ENABLE,
> +	       port->bridge_base_addr + MICROSEMI_IMASK_LOCAL);
> +
> +	return 0;
> +}
> +
> +/**
> + * microsemi_pcie_init_port - Parse Device tree, Initialize hardware
> + * @port: PCIe port information
> + *
> + * Return: '0' on success and error value on failure
> + */
> +static int microsemi_pcie_init_port(struct microsemi_pcie_port *port)
> +{
> +	struct device *dev = port->dev;
> +	struct device_node *node = dev->of_node;
> +	struct of_pci_range_parser parser;
> +	struct of_pci_range range;
> +	struct resource regs;
> +	struct resource regs1;
> +	resource_size_t size;
> +	u32 atr_sz;
> +	const char *type;
> +	int err;
> +	u32 val;
> +	int index = 1;
> +
> +	type = of_get_property(node, "device_type", NULL);
> +	if (!type || strcmp(type, "pci")) {
> +		dev_err(dev, "invalid \"device_type\" %s\n", type);
> +		return -EINVAL;
> +	}

Remove the "device_type" check, it is obsolete.

> +
> +	/* Only supporting bridge 1 */
> +	port->bridge = 1;
> +
> +	mutex_init(&port->lock);
> +
> +	err = of_address_to_resource(node, 0, &regs);
> +	if (err) {
> +		dev_err(dev, "missing \"reg\" property\n");
> +		return err;
> +	}
> +
> +	port->pcie_base_addr = devm_pci_remap_cfg_resource(dev, &regs);
> +	if (IS_ERR(port->pcie_base_addr))
> +		return PTR_ERR(port->pcie_base_addr);
> +
> +	err = of_address_to_resource(node, 1, &regs1);
> +	if (err) {
> +		dev_err(dev, "missing \"reg\" property\n");
> +		return err;
> +	}
> +
> +	port->axi_base_addr = devm_ioremap_resource(dev, &regs1);
> +	if (IS_ERR(port->axi_base_addr))
> +		return PTR_ERR(port->axi_base_addr);
> +
> +	if (port->bridge == 0) {

This is dead code, isn't it ? If we only support bridge 1...

> +		port->bridge_base_addr = port->axi_base_addr
> +			+ MICROSEMI_PCIE0_BRIDGE_ADDR;
> +		port->ctrl_base_addr = port->axi_base_addr
> +			+ MICROSEMI_PCIE0_CTRL_ADDR;
> +	} else {
> +		port->bridge_base_addr = port->axi_base_addr
> +			+ MICROSEMI_PCIE1_BRIDGE_ADDR;
> +		port->ctrl_base_addr = port->axi_base_addr
> +			+ MICROSEMI_PCIE1_CTRL_ADDR;
> +	}
> +
> +	port->irq = irq_of_parse_and_map(node, 0);

of_irq_get()

> +
> +	err = devm_request_irq(dev, port->irq, microsemi_pcie_intr_handler,
> +			       IRQF_SHARED | IRQF_NO_THREAD,
> +			       "microsemi-pcie", port);

No we are not requesting the IRQ line, it is a cascaded IRQ and must
be handled differently, see drivers above for examples.

> +	if (err) {
> +		dev_err(dev, "unable to request IRQ%d\n", port->irq);
> +		return err;
> +	}
> +
> +	microsemi_pcie_enable(port);
> +
> +	/* Clear and Disable interrupts */
> +	val = ECC_CONTROL_AXI2PCIE_RAM_ECC_BYPASS
> +		| ECC_CONTROL_PCIE2AXI_RAM_ECC_BYPASS
> +		| ECC_CONTROL_RX_RAM_ECC_BYPASS
> +		| ECC_CONTROL_TX_RAM_ECC_BYPASS;
> +	writel(val, port->ctrl_base_addr + MICROSEMI_ECC_CONTROL);
> +
> +	val = PCIE_EVENT_INT_L2_EXIT_INT
> +		| PCIE_EVENT_INT_HOTRST_EXIT_INT
> +		| PCIE_EVENT_INT_DLUP_EXIT_INT
> +		| PCIE_EVENT_INT_L2_EXIT_INT_MASK
> +		| PCIE_EVENT_INT_HOTRST_EXIT_INT_MASK
> +		| PCIE_EVENT_INT_DLUP_EXIT_INT_MASK;
> +	writel(val, port->ctrl_base_addr + MICROSEMI_PCIE_EVENT_INT);
> +
> +	val = SEC_ERROR_INT_TX_RAM_SEC_ERR_INT
> +		| SEC_ERROR_INT_RX_RAM_SEC_ERR_INT
> +		| SEC_ERROR_INT_PCIE2AXI_RAM_SEC_ERR_INT
> +		| SEC_ERROR_INT_AXI2PCIE_RAM_SEC_ERR_INT;
> +	writel(val, port->ctrl_base_addr + MICROSEMI_SEC_ERROR_INT);
> +	writel(val, port->ctrl_base_addr + MICROSEMI_SEC_ERROR_INT_MASK);
> +
> +	val = DED_ERROR_INT_TX_RAM_DED_ERR_INT
> +		| DED_ERROR_INT_RX_RAM_DED_ERR_INT
> +		| DED_ERROR_INT_PCIE2AXI_RAM_DED_ERR_INT
> +		| DED_ERROR_INT_AXI2PCIE_RAM_DED_ERR_INT;
> +	writel(val, port->ctrl_base_addr + MICROSEMI_DED_ERROR_INT);
> +	writel(val, port->ctrl_base_addr + MICROSEMI_DED_ERROR_INT_MASK);
> +
> +	writel(0x00000000, port->bridge_base_addr + MICROSEMI_IMASK_LOCAL);
> +	writel(GENMASK(31, 0),
> +	       port->bridge_base_addr + MICROSEMI_ISTATUS_LOCAL);
> +	writel(0x00000000, port->bridge_base_addr + MICROSEMI_IMASK_HOST);
> +	writel(GENMASK(31, 0), port->bridge_base_addr + MICROSEMI_ISTATUS_HOST);
> +
> +	/* Configure Address Translation Table 0 for PCIe config space */
> +	writel(MICROSEMI_PCIE_CONFIG_INTERFACE,
> +	       port->bridge_base_addr + MICROSEMI_ATR0_AXI4_SLV0_TRSL_PARAM);
> +
> +	size = resource_size(&regs);
> +
> +	atr_sz = find_first_bit((const unsigned long *)&size, 64) - 1;
> +
> +	writel(lower_32_bits(regs.start)
> +		| atr_sz << ATR_SIZE_SHIFT | ATR_IMPL_ENABLE,
> +		port->bridge_base_addr
> +		+ MICROSEMI_ATR0_AXI4_SLV0_SRCADDR_PARAM);
> +
> +	writel(lower_32_bits(regs.start),
> +	       port->bridge_base_addr + MICROSEMI_ATR0_AXI4_SLV0_TRSL_ADDR_LSB);
> +
> +	if (of_pci_range_parser_init(&parser, node)) {
> +		dev_err(dev, "missing \"ranges\" property\n");
> +		return -EINVAL;
> +	}
> +
> +	for_each_of_pci_range(&parser, &range) {

Why not call:

devm_of_pci_get_host_bridge_resources()

before this function so that you do not have to parse the host bridge
resources again ?

> +						    &iobase);
> +		switch (range.flags & IORESOURCE_TYPE_BITS) {
> +		case IORESOURCE_MEM:
> +			size = range.size;
> +			atr_sz =
> +				find_first_bit((const unsigned long *)&size, 64)
> +				- 1;
> +
> +			/* Configure Address Translation Table index for PCIe
> +			 * mem space
> +			 */
> +			writel(MICROSEMI_PCIE_TX_RX_INTERFACE,
> +			       port->bridge_base_addr
> +				+ (index * MICROSEMI_ATR0_AXI4_SLV_SIZE)
> +				+ MICROSEMI_ATR0_AXI4_SLV0_TRSL_PARAM);
> +
> +			writel(lower_32_bits(range.cpu_addr)
> +				| (atr_sz << ATR_SIZE_SHIFT)
> +				| ATR_IMPL_ENABLE,
> +				port->bridge_base_addr
> +				+ (index * MICROSEMI_ATR0_AXI4_SLV_SIZE)
> +				+ MICROSEMI_ATR0_AXI4_SLV0_SRCADDR_PARAM);
> +
> +			writel(lower_32_bits(range.pci_addr),
> +			       port->bridge_base_addr
> +				+ (index * MICROSEMI_ATR0_AXI4_SLV_SIZE)
> +				+ MICROSEMI_ATR0_AXI4_SLV0_TRSL_ADDR_LSB);
> +
> +			break;
> +		}
> +		index++;
> +	}
> +
> +	writel(readl(port->bridge_base_addr
> +		+ MICROSEMI_ATR0_PCIE_WIN0_SRCADDR_31_12)
> +		| (MICROSEMI_ATR0_PCIE_WIN0_SIZE
> +		<< MICROSEMI_ATR0_PCIE_WIN0_SIZE_SHIFT),
> +		port->bridge_base_addr +
> +		MICROSEMI_ATR0_PCIE_WIN0_SRCADDR_31_12);
> +
> +	writel(0x0,
> +	       port->bridge_base_addr + MICROSEMI_ATR0_PCIE_WIN0_SRCADDR_63_32);
> +
> +	writel((readl(port->bridge_base_addr + MICROSEMI_PCIE_PCI_IDS_DW1)
> +		& 0xffff)
> +		| (PCI_CLASS_BRIDGE_PCI << 16),
> +		port->bridge_base_addr + MICROSEMI_PCIE_PCI_IDS_DW1);
> +
> +	return 0;
> +}
> +
> +/**
> + * microsemi_pcie_probe - Probe function
> + * @pdev: Platform device pointer
> + *
> + * Return: '0' on success and error value on failure
> + */
> +static int microsemi_pcie_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct microsemi_pcie_port *port;
> +	struct pci_bus *bus, *child;
> +	struct pci_host_bridge *bridge;
> +	int err;
> +	resource_size_t iobase = 0;
> +	LIST_HEAD(res);
> +
> +	if (!dev->of_node)
> +		return -ENODEV;
> +
> +	bridge = devm_pci_alloc_host_bridge(dev, sizeof(*port));
> +	if (!bridge)
> +		return -ENODEV;
> +
> +	port = pci_host_bridge_priv(bridge);
> +
> +	port->dev = dev;
> +	port->pdev = pdev;
> +
> +	err = microsemi_pcie_init_port(port);
> +	if (err) {
> +		dev_err(dev, "PCIe port initialization failed\n");
> +		return err;
> +	}
> +
> +	err = microsemi_pcie_init_irq_domain(port);
> +	if (err) {
> +		dev_err(dev, "failed creating IRQ domain\n");
> +		return err;
> +	}
> +
> +	err = devm_of_pci_get_host_bridge_resources(dev, 0, 0xff, &res,
> +						    &iobase);
> +	if (err) {
> +		dev_err(dev, "getting bridge resources failed\n");
> +		return err;
> +	}
> +
> +	err = devm_request_pci_bus_resources(dev, &res);
> +	if (err)
> +		goto error;
> +
> +	list_splice_init(&res, &bridge->windows);
> +	bridge->dev.parent = dev;
> +	bridge->sysdata = port;
> +	bridge->busnr = 0;
> +	bridge->ops = &microsemi_pcie_ops;
> +	bridge->map_irq = of_irq_parse_and_map_pci;
> +	bridge->swizzle_irq = pci_common_swizzle;
> +
> +#ifdef CONFIG_PCI_MSI
> +	microsemi_pcie_msi_chip.dev = dev;
> +	bridge->msi = &microsemi_pcie_msi_chip;
> +#endif

This way of implementing MSIs is deprecated, remove this code, the
matching of MSI IRQ chip with the PCI devices is carried out through
DT bindings, there is no need for this bridge->msi pointer setting
anymore; again check the drivers I listed above for hints they will
help you understand the mechanism.

Overall you are on the right track - update the MSI/INTX handling
code as per my comments above and repost, if in doubt ask.

Apologies for the delay in getting back to you.

Lorenzo

> +	err = pci_scan_root_bus_bridge(bridge);
> +	if (err < 0)
> +		goto error;
> +
> +	bus = bridge->bus;
> +
> +	pci_assign_unassigned_bus_resources(bus);
> +	list_for_each_entry(child, &bus->children, node)
> +		pcie_bus_configure_settings(child);
> +	pci_bus_add_devices(bus);
> +
> +	return 0;
> +
> +error:
> +	pci_free_resource_list(&res);
> +	return err;
> +}
> +
> +static const struct of_device_id microsemi_pcie_of_match[] = {
> +	{ .compatible = "microsemi,ms-pf-axi-pcie-host", },
> +	{}
> +};
> +
> +static struct platform_driver microsemi_pcie_driver = {
> +	.driver = {
> +		.name = "microsemi-pcie",
> +		.of_match_table = microsemi_pcie_of_match,
> +		.suppress_bind_attrs = true,
> +	},
> +	.probe = microsemi_pcie_probe,
> +};
> +builtin_platform_driver(microsemi_pcie_driver);
> -- 
> 2.17.0
>

Patch

diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index 6671946dbf66..31fa5e53d765 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -280,5 +280,13 @@  config VMD
 	  To compile this driver as a module, choose M here: the
 	  module will be called vmd.
 
+config PCIE_MICROSEMI
+	bool "Microsemi AXI PCIe host bridge support"
+	depends on PCI_MSI && OF
+	help
+	  Say 'Y' here if you want kernel to support the Microsemi AXI PCIe
+	  Host Bridge driver.
+
+
 source "drivers/pci/controller/dwc/Kconfig"
 endmenu
diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile
index d56a507495c5..c3b76ff221be 100644
--- a/drivers/pci/controller/Makefile
+++ b/drivers/pci/controller/Makefile
@@ -28,6 +28,7 @@  obj-$(CONFIG_PCIE_ROCKCHIP_HOST) += pcie-rockchip-host.o
 obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o
 obj-$(CONFIG_PCIE_MOBIVEIL) += pcie-mobiveil.o
 obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o
+obj-$(CONFIG_PCIE_MICROSEMI) += pcie-microsemi.o
 obj-$(CONFIG_VMD) += vmd.o
 # pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW
 obj-y				+= dwc/
diff --git a/drivers/pci/controller/pcie-microsemi.c b/drivers/pci/controller/pcie-microsemi.c
new file mode 100644
index 000000000000..60e185bebc60
--- /dev/null
+++ b/drivers/pci/controller/pcie-microsemi.c
@@ -0,0 +1,764 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * PCIe host controller driver for Microsemi AXI PCIe Bridge
+ *
+ * Copyright (c) 2018 - 2019 Microsemi Corporation.
+ *
+ * Based on:
+ *	pcie-rcar.c
+ *	pcie-xilinx.c
+ *	pcie-altera.c
+ */
+
+#include <linux/bitmap.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/msi.h>
+#include <linux/of_address.h>
+#include <linux/of_pci.h>
+#include <linux/of_platform.h>
+#include <linux/of_irq.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+
+#include "../pci.h"
+
+/* ECAM definitions */
+#define ECAM_BUS_NUM_SHIFT		20
+#define ECAM_DEV_NUM_SHIFT		12
+
+/* Number of MSI IRQs */
+#define MICROSEMI_NUM_MSI_IRQS		32
+#define MICROSEMI_NUM_MSI_IRQS_CODED	 5
+
+/* PCIe Bridge Phy and Controller Phy offsets */
+#define MICROSEMI_PCIE0_BRIDGE_ADDR	0x00004000u
+#define MICROSEMI_PCIE0_CTRL_ADDR	0x00006000u
+
+#define MICROSEMI_PCIE1_BRIDGE_ADDR	0x00008000u
+#define MICROSEMI_PCIE1_CTRL_ADDR	0x0000a000u
+
+/* PCIe Controller Phy Regs */
+#define MICROSEMI_SEC_ERROR_INT			0x28
+#define SEC_ERROR_INT_TX_RAM_SEC_ERR_INT	GENMASK(3, 0)
+#define SEC_ERROR_INT_RX_RAM_SEC_ERR_INT	GENMASK(7, 4)
+#define SEC_ERROR_INT_PCIE2AXI_RAM_SEC_ERR_INT	GENMASK(11, 8)
+#define SEC_ERROR_INT_AXI2PCIE_RAM_SEC_ERR_INT	GENMASK(15, 12)
+#define MICROSEMI_SEC_ERROR_INT_MASK		0x2c
+#define MICROSEMI_DED_ERROR_INT			0x30
+#define DED_ERROR_INT_TX_RAM_DED_ERR_INT	GENMASK(3, 0)
+#define DED_ERROR_INT_RX_RAM_DED_ERR_INT	GENMASK(7, 4)
+#define DED_ERROR_INT_PCIE2AXI_RAM_DED_ERR_INT	GENMASK(11, 8)
+#define DED_ERROR_INT_AXI2PCIE_RAM_DED_ERR_INT	GENMASK(15, 12)
+#define MICROSEMI_DED_ERROR_INT_MASK		0x34
+#define MICROSEMI_ECC_CONTROL			0x38
+#define ECC_CONTROL_AXI2PCIE_RAM_ECC_BYPASS	BIT(27)
+#define ECC_CONTROL_PCIE2AXI_RAM_ECC_BYPASS	BIT(26)
+#define ECC_CONTROL_RX_RAM_ECC_BYPASS		BIT(25)
+#define ECC_CONTROL_TX_RAM_ECC_BYPASS		BIT(24)
+#define MICROSEMI_LTSSM_STATE			0x5c
+#define MICROSEMI_LTSSM_L0_STATE		0x10
+#define MICROSEMI_PCIE_EVENT_INT		0x14c
+#define PCIE_EVENT_INT_L2_EXIT_INT		BIT(0)
+#define PCIE_EVENT_INT_HOTRST_EXIT_INT		BIT(1)
+#define PCIE_EVENT_INT_DLUP_EXIT_INT		BIT(2)
+#define PCIE_EVENT_INT_L2_EXIT_INT_MASK		BIT(16)
+#define PCIE_EVENT_INT_HOTRST_EXIT_INT_MASK	BIT(17)
+#define PCIE_EVENT_INT_DLUP_EXIT_INT_MASK	BIT(18)
+
+/* PCIe Bridge Phy Regs */
+#define MICROSEMI_PCIE_PCI_IDS_DW1		0x9c
+#define MICROSEMI_IMASK_LOCAL			0x180
+#define MICROSEMI_PCIE_LOCAL_INT_ENABLE		0x0f000000u
+#define MICROSEMI_PCI_INTS			0x0f000000u
+#define MICROSEMI_PM_MSI_INT_SHIFT		24
+#define MICROSEMI_PCIE_ENABLE_MSI		0x10000000u
+#define MICROSEMI_MSI_INT			0x10000000u
+#define MICROSEMI_MSI_INT_SHIFT			28
+#define MICROSEMI_ISTATUS_LOCAL			0x184
+#define MICROSEMI_IMASK_HOST			0x188
+#define MICROSEMI_ISTATUS_HOST			0x18c
+#define MICROSEMI_ISTATUS_MSI			0x194
+
+/* PCIe AXI slave table init defines */
+#define MICROSEMI_ATR0_AXI4_SLV0_SRCADDR_PARAM	0x800u
+#define ATR_SIZE_SHIFT				1
+#define ATR_IMPL_ENABLE				1
+#define MICROSEMI_ATR0_AXI4_SLV0_SRC_ADDR	0x804u
+#define MICROSEMI_ATR0_AXI4_SLV0_TRSL_ADDR_LSB	0x808u
+#define MICROSEMI_ATR0_AXI4_SLV0_TRSL_ADDR_UDW	0x80cu
+#define MICROSEMI_ATR0_AXI4_SLV0_TRSL_PARAM	0x810u
+#define MICROSEMI_PCIE_TX_RX_INTERFACE		0x00000000u
+#define MICROSEMI_PCIE_CONFIG_INTERFACE		0x00000001u
+
+#define MICROSEMI_ATR0_AXI4_SLV_SIZE		32
+
+/* PCIe Master table init defines */
+#define MICROSEMI_ATR0_PCIE_WIN0_SRCADDR_31_12	0x600u
+#define MICROSEMI_ATR0_PCIE_WIN0_SIZE		0x1f
+#define MICROSEMI_ATR0_PCIE_WIN0_SIZE_SHIFT	1
+#define MICROSEMI_ATR0_PCIE_WIN0_SRCADDR_63_32	0x604u
+
+#define MICROSEMI_MSI_MSG_ADDR			0x190u
+
+/* PCIe Config space MSI capability structure */
+#define MSI_CAP_CTRL_OFFSET		0xe0u
+#define MSI_ENABLE			(0x01u << 16)
+#define MSI_ENABLE_MULTI		(MICROSEMI_NUM_MSI_IRQS_CODED << 20)
+#define MSI_MSG_ADDR_OFFSET		0xe4u
+#define MSI_MSG_UPPER_ADDR_OFFSET	0xe8u
+#define MSI_MSG_DATA_OFFSET		0xf0u
+
+/**
+ * struct microsemi_pcie_port - PCIe port information
+ * @pcie_base_addr: IO Mapped Register Base
+ * @axi_base_addr: AMBA Mapped Register Base
+ * @irq: Interrupt number
+ * @root_busno: Root Bus number
+ * @dev: Device pointer
+ * @msi_domain: MSI IRQ domain pointer
+ * @leg_domain: Legacy IRQ domain pointer
+ * @resources: Bus Resources
+ */
+struct microsemi_pcie_port {
+	struct platform_device *pdev;
+	void __iomem *pcie_base_addr;
+	void __iomem *axi_base_addr;
+	void __iomem *bridge_base_addr;
+	void __iomem *ctrl_base_addr;
+	int bridge;
+	u32 irq;
+	u8 root_busno;
+	struct device *dev;
+	struct irq_domain *msi_domain;
+	struct irq_domain *leg_domain;
+	struct list_head resources;
+	struct mutex lock;			/* protect bitmap variable */
+	DECLARE_BITMAP(msi_irq_in_use, MICROSEMI_NUM_MSI_IRQS);
+};
+
+static inline u32 pcie_read(struct microsemi_pcie_port *port, u32 reg)
+{
+	return readl(port->pcie_base_addr + reg);
+}
+
+static inline void pcie_write(struct microsemi_pcie_port *port,
+			      u32 val, u32 reg)
+{
+	writel(val, port->pcie_base_addr + reg);
+}
+
+static void microsemi_pcie_enable(struct microsemi_pcie_port *port)
+{
+	u32 enb;
+
+	enb = readl(port->bridge_base_addr + MICROSEMI_LTSSM_STATE);
+	enb |= MICROSEMI_LTSSM_L0_STATE;
+	writel(enb, port->bridge_base_addr + MICROSEMI_LTSSM_STATE);
+}
+
+/**
+ * microsemi_pcie_valid_device - Check if a valid device is present on bus
+ * @bus: PCI Bus structure
+ * @devfn: device/function
+ *
+ * Return: 'true' on success and 'false' if invalid device is found
+ */
+static bool microsemi_pcie_valid_device(struct pci_bus *bus, unsigned int devfn)
+{
+	struct microsemi_pcie_port *port = bus->sysdata;
+
+	/* Only one device down on each root port */
+	if (bus->number == port->root_busno && devfn > 0)
+		return false;
+
+	return true;
+}
+
+/**
+ * microsemi_pcie_map_bus - Get configuration base
+ * @bus: PCI Bus structure
+ * @devfn: Device/function
+ * @where: Offset from base
+ *
+ * Return: Base address of the configuration space needed to be
+ *	 accessed.
+ */
+static void __iomem *microsemi_pcie_map_bus(struct pci_bus *bus,
+					    unsigned int devfn, int where)
+{
+	struct microsemi_pcie_port *port = bus->sysdata;
+	int relbus;
+
+	if (!microsemi_pcie_valid_device(bus, devfn))
+		return NULL;
+
+	relbus = (bus->number << ECAM_BUS_NUM_SHIFT) |
+		(devfn << ECAM_DEV_NUM_SHIFT);
+
+	return port->pcie_base_addr + relbus + where;
+}
+
+/* PCIe operations */
+static struct pci_ops microsemi_pcie_ops = {
+	.map_bus = microsemi_pcie_map_bus,
+	.read	= pci_generic_config_read,
+	.write	= pci_generic_config_write,
+};
+
+/* MSI functions */
+
+/**
+ * microsemi_pcie_destroy_msi - Free MSI number
+ * @irq: IRQ to be freed
+ */
+static void microsemi_pcie_destroy_msi(unsigned int irq)
+{
+	struct microsemi_pcie_port *port =
+		msi_desc_to_pci_sysdata(irq_get_msi_desc(irq));
+	irq_hw_number_t hwirq = irqd_to_hwirq(irq_get_irq_data(irq));
+
+	if (!port)
+		return;
+
+	if (!test_bit(hwirq, port->msi_irq_in_use))
+		dev_err(port->dev, "trying to free unused MSI%d\n", irq);
+	else
+		clear_bit(hwirq, port->msi_irq_in_use);
+}
+
+/**
+ * microsemi_pcie_assign_msi - Allocate MSI number
+ *
+ * Return: A valid IRQ on success and error value on failure.
+ */
+static int microsemi_pcie_assign_msi(struct microsemi_pcie_port *port)
+{
+	int pos;
+
+	mutex_lock(&port->lock);
+	pos = find_first_zero_bit(port->msi_irq_in_use, MICROSEMI_NUM_MSI_IRQS);
+	if (pos < MICROSEMI_NUM_MSI_IRQS) {
+		set_bit(pos, port->msi_irq_in_use);
+	} else {
+		mutex_unlock(&port->lock);
+		return -ENOSPC;
+	}
+
+	mutex_unlock(&port->lock);
+	return pos;
+}
+
+/**
+ * microsemi_msi_teardown_irq - Destroy the MSI
+ * @chip: MSI Chip descriptor
+ * @irq: MSI IRQ to destroy
+ */
+static void microsemi_msi_teardown_irq(struct msi_controller *chip,
+				       unsigned int irq)
+{
+	microsemi_pcie_destroy_msi(irq);
+	irq_dispose_mapping(irq);
+}
+
+/**
+ * microsemi_pcie_msi_setup_irq - Setup MSI request
+ * @chip: MSI chip pointer
+ * @pdev: PCIe device pointer
+ * @desc: MSI descriptor pointer
+ *
+ * Return: '0' on success and error value on failure
+ */
+static int microsemi_pcie_msi_setup_irq(struct msi_controller *chip,
+					struct pci_dev *pdev,
+					struct msi_desc *desc)
+{
+	struct microsemi_pcie_port *port = pdev->bus->sysdata;
+	unsigned int irq;
+	int hwirq;
+	struct msi_msg msg;
+
+	hwirq = microsemi_pcie_assign_msi(port);
+	if (hwirq < 0)
+		return hwirq;
+
+	irq = irq_create_mapping(port->msi_domain, hwirq);
+	if (!irq)
+		return -EINVAL;
+
+	irq_set_msi_desc(irq, desc);
+
+	msg.address_hi = upper_32_bits(MICROSEMI_MSI_MSG_ADDR);
+	msg.address_lo = lower_32_bits(MICROSEMI_MSI_MSG_ADDR);
+	msg.data = hwirq;
+
+	pci_write_msi_msg(irq, &msg);
+
+	return 0;
+}
+
+/* MSI Chip Descriptor */
+static struct msi_controller microsemi_pcie_msi_chip = {
+	.setup_irq = microsemi_pcie_msi_setup_irq,
+	.teardown_irq = microsemi_msi_teardown_irq,
+};
+
+/* HW Interrupt Chip Descriptor */
+static struct irq_chip microsemi_msi_irq_chip = {
+	.name = "Microsemi PCIe MSI",
+	.irq_enable = pci_msi_unmask_irq,
+	.irq_disable = pci_msi_mask_irq,
+	.irq_mask = pci_msi_mask_irq,
+	.irq_unmask = pci_msi_unmask_irq,
+};
+
+/**
+ * microsemi_pcie_msi_map - Set the handler for the MSI and mark IRQ as valid
+ * @domain: IRQ domain
+ * @irq: Virtual IRQ number
+ * @hwirq: HW interrupt number
+ *
+ * Return: Always returns 0.
+ */
+static int microsemi_pcie_msi_map(struct irq_domain *domain, unsigned int irq,
+				  irq_hw_number_t hwirq)
+{
+	irq_set_chip_and_handler(irq, &microsemi_msi_irq_chip,
+				 handle_simple_irq);
+	irq_set_chip_data(irq, domain->host_data);
+
+	return 0;
+}
+
+/* IRQ Domain operations */
+static const struct irq_domain_ops msi_domain_ops = {
+	.map = microsemi_pcie_msi_map,
+};
+
+/**
+ * microsemi_pcie_enable_msi - Enable MSI support
+ * @port: PCIe port information
+ */
+static void microsemi_pcie_enable_msi(struct microsemi_pcie_port *port)
+{
+	u32 cap_ctrl;
+
+	cap_ctrl = pcie_read(port, MSI_CAP_CTRL_OFFSET);
+
+	pcie_write(port, cap_ctrl | MSI_ENABLE_MULTI |
+		MSI_ENABLE, MSI_CAP_CTRL_OFFSET);
+	pcie_write(port, MICROSEMI_MSI_MSG_ADDR, MSI_MSG_ADDR_OFFSET);
+}
+
+/* INTx Functions */
+
+/**
+ * microsemi_pcie_intx_map - Set the handler for the INTx and mark IRQ as valid
+ * @domain: IRQ domain
+ * @irq: Virtual IRQ number
+ * @hwirq: HW interrupt number
+ *
+ * Return: Always returns 0.
+ */
+static int microsemi_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
+				   irq_hw_number_t hwirq)
+{
+	irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_simple_irq);
+	irq_set_chip_data(irq, domain->host_data);
+
+	return 0;
+}
+
+/* INTx IRQ Domain operations */
+static const struct irq_domain_ops intx_domain_ops = {
+	.map = microsemi_pcie_intx_map,
+	.xlate = pci_irqd_intx_xlate,
+};
+
+/* PCIe HW Functions */
+
+/**
+ * microsemi_pcie_intr_handler - Interrupt Service Handler
+ * @irq: IRQ number
+ * @data: PCIe port information
+ *
+ * Return: IRQ_HANDLED on success and IRQ_NONE on failure
+ */
+static irqreturn_t microsemi_pcie_intr_handler(int irq, void *data)
+{
+	struct microsemi_pcie_port *port = (struct microsemi_pcie_port *)data;
+	struct device *dev = port->dev;
+	unsigned long status;
+	unsigned long msi;
+	u32 bit;
+	u32 virq;
+
+	status = readl(port->bridge_base_addr + MICROSEMI_ISTATUS_LOCAL);
+
+	/* Might be sharing interrupt line.  Check if interrupt is for us */
+	if (!status)
+		return IRQ_NONE;
+
+	status = (status & MICROSEMI_PCI_INTS) >> MICROSEMI_PM_MSI_INT_SHIFT;
+	for_each_set_bit(bit, &status, PCI_NUM_INTX) {
+		/* clear that interrupt bit */
+		writel(1 << (bit + MICROSEMI_PM_MSI_INT_SHIFT),
+		       port->bridge_base_addr + MICROSEMI_ISTATUS_LOCAL);
+		virq = irq_find_mapping(port->leg_domain, bit);
+
+		if (virq)
+			generic_handle_irq(virq);
+		else
+			dev_err(dev, "unexpected IRQ, INT%d\n", bit);
+	}
+
+	status = readl(port->bridge_base_addr + MICROSEMI_ISTATUS_LOCAL);
+	if (status & MICROSEMI_MSI_INT) {
+		/* Clear the ISTATUS MSI bit */
+		writel((1 << MICROSEMI_MSI_INT_SHIFT),
+		       port->bridge_base_addr + MICROSEMI_ISTATUS_LOCAL);
+		msi = readl(port->bridge_base_addr + MICROSEMI_ISTATUS_MSI);
+		for_each_set_bit(bit, &msi, MICROSEMI_NUM_MSI_IRQS) {
+			/* clear that MSI interrupt bit */
+			writel((1 << bit),
+			       port->bridge_base_addr + MICROSEMI_ISTATUS_MSI);
+			virq = irq_find_mapping(port->msi_domain, bit);
+			if (virq)
+				generic_handle_irq(virq);
+			else
+				dev_err(dev, "unexpected IRQ, INT%d\n", bit);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * microsemi_pcie_init_irq_domain - Initialize IRQ domain
+ * @port: PCIe port information
+ *
+ * Return: '0' on success and error value on failure
+ */
+static int microsemi_pcie_init_irq_domain(struct microsemi_pcie_port *port)
+{
+	struct device *dev = port->dev;
+	struct device_node *node = dev->of_node;
+	struct device_node *pcie_intc_node;
+
+	/* Setup INTx */
+	pcie_intc_node = of_get_next_child(node, NULL);
+	if (!pcie_intc_node) {
+		dev_err(dev, "no PCIe INTx node found\n");
+		return -ENODEV;
+	}
+
+	port->leg_domain = irq_domain_add_linear(pcie_intc_node, PCI_NUM_INTX,
+						 &intx_domain_ops,
+						 port);
+	if (!port->leg_domain) {
+		dev_err(dev, "failed to get a INTx IRQ domain\n");
+		return -ENODEV;
+	}
+
+	/* Setup MSI */
+	if (IS_ENABLED(CONFIG_PCI_MSI)) {
+		port->msi_domain =
+			irq_domain_add_linear(node,
+					      MICROSEMI_NUM_MSI_IRQS,
+					      &msi_domain_ops,
+					      &microsemi_pcie_msi_chip);
+		if (!port->msi_domain) {
+			dev_err(dev, "failed to get an MSI IRQ domain\n");
+			return -ENODEV;
+		}
+		microsemi_pcie_enable_msi(port);
+	}
+
+	/* Enable interrupts */
+	writel(MICROSEMI_PCIE_ENABLE_MSI | MICROSEMI_PCIE_LOCAL_INT_ENABLE,
+	       port->bridge_base_addr + MICROSEMI_IMASK_LOCAL);
+
+	return 0;
+}
+
+/**
+ * microsemi_pcie_init_port - Parse Device tree, Initialize hardware
+ * @port: PCIe port information
+ *
+ * Return: '0' on success and error value on failure
+ */
+static int microsemi_pcie_init_port(struct microsemi_pcie_port *port)
+{
+	struct device *dev = port->dev;
+	struct device_node *node = dev->of_node;
+	struct of_pci_range_parser parser;
+	struct of_pci_range range;
+	struct resource regs;
+	struct resource regs1;
+	resource_size_t size;
+	u32 atr_sz;
+	const char *type;
+	int err;
+	u32 val;
+	int index = 1;
+
+	type = of_get_property(node, "device_type", NULL);
+	if (!type || strcmp(type, "pci")) {
+		dev_err(dev, "invalid \"device_type\" %s\n", type);
+		return -EINVAL;
+	}
+
+	/* Only supporting bridge 1 */
+	port->bridge = 1;
+
+	mutex_init(&port->lock);
+
+	err = of_address_to_resource(node, 0, &regs);
+	if (err) {
+		dev_err(dev, "missing \"reg\" property\n");
+		return err;
+	}
+
+	port->pcie_base_addr = devm_pci_remap_cfg_resource(dev, &regs);
+	if (IS_ERR(port->pcie_base_addr))
+		return PTR_ERR(port->pcie_base_addr);
+
+	err = of_address_to_resource(node, 1, &regs1);
+	if (err) {
+		dev_err(dev, "missing \"reg\" property\n");
+		return err;
+	}
+
+	port->axi_base_addr = devm_ioremap_resource(dev, &regs1);
+	if (IS_ERR(port->axi_base_addr))
+		return PTR_ERR(port->axi_base_addr);
+
+	if (port->bridge == 0) {
+		port->bridge_base_addr = port->axi_base_addr
+			+ MICROSEMI_PCIE0_BRIDGE_ADDR;
+		port->ctrl_base_addr = port->axi_base_addr
+			+ MICROSEMI_PCIE0_CTRL_ADDR;
+	} else {
+		port->bridge_base_addr = port->axi_base_addr
+			+ MICROSEMI_PCIE1_BRIDGE_ADDR;
+		port->ctrl_base_addr = port->axi_base_addr
+			+ MICROSEMI_PCIE1_CTRL_ADDR;
+	}
+
+	port->irq = irq_of_parse_and_map(node, 0);
+
+	err = devm_request_irq(dev, port->irq, microsemi_pcie_intr_handler,
+			       IRQF_SHARED | IRQF_NO_THREAD,
+			       "microsemi-pcie", port);
+	if (err) {
+		dev_err(dev, "unable to request IRQ%d\n", port->irq);
+		return err;
+	}
+
+	microsemi_pcie_enable(port);
+
+	/* Clear and Disable interrupts */
+	val = ECC_CONTROL_AXI2PCIE_RAM_ECC_BYPASS
+		| ECC_CONTROL_PCIE2AXI_RAM_ECC_BYPASS
+		| ECC_CONTROL_RX_RAM_ECC_BYPASS
+		| ECC_CONTROL_TX_RAM_ECC_BYPASS;
+	writel(val, port->ctrl_base_addr + MICROSEMI_ECC_CONTROL);
+
+	val = PCIE_EVENT_INT_L2_EXIT_INT
+		| PCIE_EVENT_INT_HOTRST_EXIT_INT
+		| PCIE_EVENT_INT_DLUP_EXIT_INT
+		| PCIE_EVENT_INT_L2_EXIT_INT_MASK
+		| PCIE_EVENT_INT_HOTRST_EXIT_INT_MASK
+		| PCIE_EVENT_INT_DLUP_EXIT_INT_MASK;
+	writel(val, port->ctrl_base_addr + MICROSEMI_PCIE_EVENT_INT);
+
+	val = SEC_ERROR_INT_TX_RAM_SEC_ERR_INT
+		| SEC_ERROR_INT_RX_RAM_SEC_ERR_INT
+		| SEC_ERROR_INT_PCIE2AXI_RAM_SEC_ERR_INT
+		| SEC_ERROR_INT_AXI2PCIE_RAM_SEC_ERR_INT;
+	writel(val, port->ctrl_base_addr + MICROSEMI_SEC_ERROR_INT);
+	writel(val, port->ctrl_base_addr + MICROSEMI_SEC_ERROR_INT_MASK);
+
+	val = DED_ERROR_INT_TX_RAM_DED_ERR_INT
+		| DED_ERROR_INT_RX_RAM_DED_ERR_INT
+		| DED_ERROR_INT_PCIE2AXI_RAM_DED_ERR_INT
+		| DED_ERROR_INT_AXI2PCIE_RAM_DED_ERR_INT;
+	writel(val, port->ctrl_base_addr + MICROSEMI_DED_ERROR_INT);
+	writel(val, port->ctrl_base_addr + MICROSEMI_DED_ERROR_INT_MASK);
+
+	writel(0x00000000, port->bridge_base_addr + MICROSEMI_IMASK_LOCAL);
+	writel(GENMASK(31, 0),
+	       port->bridge_base_addr + MICROSEMI_ISTATUS_LOCAL);
+	writel(0x00000000, port->bridge_base_addr + MICROSEMI_IMASK_HOST);
+	writel(GENMASK(31, 0), port->bridge_base_addr + MICROSEMI_ISTATUS_HOST);
+
+	/* Configure Address Translation Table 0 for PCIe config space */
+	writel(MICROSEMI_PCIE_CONFIG_INTERFACE,
+	       port->bridge_base_addr + MICROSEMI_ATR0_AXI4_SLV0_TRSL_PARAM);
+
+	size = resource_size(&regs);
+
+	atr_sz = find_first_bit((const unsigned long *)&size, 64) - 1;
+
+	writel(lower_32_bits(regs.start)
+		| atr_sz << ATR_SIZE_SHIFT | ATR_IMPL_ENABLE,
+		port->bridge_base_addr
+		+ MICROSEMI_ATR0_AXI4_SLV0_SRCADDR_PARAM);
+
+	writel(lower_32_bits(regs.start),
+	       port->bridge_base_addr + MICROSEMI_ATR0_AXI4_SLV0_TRSL_ADDR_LSB);
+
+	if (of_pci_range_parser_init(&parser, node)) {
+		dev_err(dev, "missing \"ranges\" property\n");
+		return -EINVAL;
+	}
+
+	for_each_of_pci_range(&parser, &range) {
+		switch (range.flags & IORESOURCE_TYPE_BITS) {
+		case IORESOURCE_MEM:
+			size = range.size;
+			atr_sz =
+				find_first_bit((const unsigned long *)&size, 64)
+				- 1;
+
+			/* Configure Address Translation Table index for PCIe
+			 * mem space
+			 */
+			writel(MICROSEMI_PCIE_TX_RX_INTERFACE,
+			       port->bridge_base_addr
+				+ (index * MICROSEMI_ATR0_AXI4_SLV_SIZE)
+				+ MICROSEMI_ATR0_AXI4_SLV0_TRSL_PARAM);
+
+			writel(lower_32_bits(range.cpu_addr)
+				| (atr_sz << ATR_SIZE_SHIFT)
+				| ATR_IMPL_ENABLE,
+				port->bridge_base_addr
+				+ (index * MICROSEMI_ATR0_AXI4_SLV_SIZE)
+				+ MICROSEMI_ATR0_AXI4_SLV0_SRCADDR_PARAM);
+
+			writel(lower_32_bits(range.pci_addr),
+			       port->bridge_base_addr
+				+ (index * MICROSEMI_ATR0_AXI4_SLV_SIZE)
+				+ MICROSEMI_ATR0_AXI4_SLV0_TRSL_ADDR_LSB);
+
+			break;
+		}
+		index++;
+	}
+
+	writel(readl(port->bridge_base_addr
+		+ MICROSEMI_ATR0_PCIE_WIN0_SRCADDR_31_12)
+		| (MICROSEMI_ATR0_PCIE_WIN0_SIZE
+		<< MICROSEMI_ATR0_PCIE_WIN0_SIZE_SHIFT),
+		port->bridge_base_addr +
+		MICROSEMI_ATR0_PCIE_WIN0_SRCADDR_31_12);
+
+	writel(0x0,
+	       port->bridge_base_addr + MICROSEMI_ATR0_PCIE_WIN0_SRCADDR_63_32);
+
+	writel((readl(port->bridge_base_addr + MICROSEMI_PCIE_PCI_IDS_DW1)
+		& 0xffff)
+		| (PCI_CLASS_BRIDGE_PCI << 16),
+		port->bridge_base_addr + MICROSEMI_PCIE_PCI_IDS_DW1);
+
+	return 0;
+}
+
+/**
+ * microsemi_pcie_probe - Probe function
+ * @pdev: Platform device pointer
+ *
+ * Return: '0' on success and error value on failure
+ */
+static int microsemi_pcie_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct microsemi_pcie_port *port;
+	struct pci_bus *bus, *child;
+	struct pci_host_bridge *bridge;
+	int err;
+	resource_size_t iobase = 0;
+	LIST_HEAD(res);
+
+	if (!dev->of_node)
+		return -ENODEV;
+
+	bridge = devm_pci_alloc_host_bridge(dev, sizeof(*port));
+	if (!bridge)
+		return -ENODEV;
+
+	port = pci_host_bridge_priv(bridge);
+
+	port->dev = dev;
+	port->pdev = pdev;
+
+	err = microsemi_pcie_init_port(port);
+	if (err) {
+		dev_err(dev, "PCIe port initialization failed\n");
+		return err;
+	}
+
+	err = microsemi_pcie_init_irq_domain(port);
+	if (err) {
+		dev_err(dev, "failed creating IRQ domain\n");
+		return err;
+	}
+
+	err = devm_of_pci_get_host_bridge_resources(dev, 0, 0xff, &res,
+						    &iobase);
+	if (err) {
+		dev_err(dev, "getting bridge resources failed\n");
+		return err;
+	}
+
+	err = devm_request_pci_bus_resources(dev, &res);
+	if (err)
+		goto error;
+
+	list_splice_init(&res, &bridge->windows);
+	bridge->dev.parent = dev;
+	bridge->sysdata = port;
+	bridge->busnr = 0;
+	bridge->ops = &microsemi_pcie_ops;
+	bridge->map_irq = of_irq_parse_and_map_pci;
+	bridge->swizzle_irq = pci_common_swizzle;
+
+#ifdef CONFIG_PCI_MSI
+	microsemi_pcie_msi_chip.dev = dev;
+	bridge->msi = &microsemi_pcie_msi_chip;
+#endif
+	err = pci_scan_root_bus_bridge(bridge);
+	if (err < 0)
+		goto error;
+
+	bus = bridge->bus;
+
+	pci_assign_unassigned_bus_resources(bus);
+	list_for_each_entry(child, &bus->children, node)
+		pcie_bus_configure_settings(child);
+	pci_bus_add_devices(bus);
+
+	return 0;
+
+error:
+	pci_free_resource_list(&res);
+	return err;
+}
+
+static const struct of_device_id microsemi_pcie_of_match[] = {
+	{ .compatible = "microsemi,ms-pf-axi-pcie-host", },
+	{}
+};
+
+static struct platform_driver microsemi_pcie_driver = {
+	.driver = {
+		.name = "microsemi-pcie",
+		.of_match_table = microsemi_pcie_of_match,
+		.suppress_bind_attrs = true,
+	},
+	.probe = microsemi_pcie_probe,
+};
+builtin_platform_driver(microsemi_pcie_driver);