@@ -1180,6 +1180,10 @@
claim. Specify efi=nosoftreserve to disable this
reservation and treat the memory by its base type
(i.e. EFI_CONVENTIONAL_MEMORY / "System RAM").
+ disable_busmaster: Disable the busmaster bit on all
+ PCI bridges while in the EFI boot stub
+ enable_busmaster: Leave the busmaster bit set on all
+ PCI bridges while in the EFI boot stub
efi_no_storage_paranoia [EFI; X86]
Using this parameter you can use more than 50% of
@@ -97,6 +97,7 @@ static inline unsigned long efi_get_max_initrd_addr(unsigned long dram_base,
#define __efi_call_early(f, ...) f(__VA_ARGS__)
#define efi_call_runtime(f, ...) sys_table_arg->runtime->f(__VA_ARGS__)
#define efi_is_64bit() (true)
+#define efi_is_mixed_mode() (false)
#define efi_table_attr(table, attr, instance) \
((table##_t *)instance)->attr
@@ -137,6 +137,8 @@ static void setup_efi_pci(struct boot_params *params)
struct setup_data *data;
int i;
+ efi_pci_disable_bridge_busmaster(sys_table);
+
status = efi_call_early(locate_handle,
EFI_LOCATE_BY_PROTOCOL,
&pci_proto, NULL, &size, pci_handle);
@@ -220,6 +220,17 @@ static inline bool efi_is_64bit(void)
return __efi_early()->is64;
}
+static inline bool efi_is_mixed_mode(void)
+{
+ if (!IS_ENABLED(CONFIG_EFI_MIXED))
+ return false;
+
+ if (!IS_ENABLED(CONFIG_X86_64))
+ return false;
+
+ return !(__efi_early()->is64);
+}
+
#define efi_table_attr(table, attr, instance) \
(efi_is_64bit() ? \
((table##_64_t *)(unsigned long)instance)->attr : \
@@ -215,6 +215,28 @@ config EFI_RCI2_TABLE
Say Y here for Dell EMC PowerEdge systems.
+config EFI_DISABLE_PCI_BUSMASTER
+ bool "Clear Busmaster bit on PCI bridges before ExitBootServices()"
+ help
+ Disable the busmaster bit in the control register on all PCI bridges
+ before calling ExitBootServices() and passing control to the runtime
+ kernel. System firmware may configure the IOMMU to prevent malicious
+ PCI devices from being able to attack the OS via DMA. However, since
+ firmware can't guarantee that the OS is IOMMU-aware, it will tear
+ down IOMMU configuration when ExitBootServices() is called. This
+ leaves a window between where a hostile device could still cause
+ damage before Linux configures the IOMMU again.
+
+ If you say Y here, the EFI stub will clear the busmaster bit on all
+ PCI bridges before ExitBootServices() is called. This will prevent
+ any malicious PCI devices from being able to perform DMA until the
+ kernel reenables busmastering after configuring the IOMMU.
+
+ This option will cause failures with some poorly behaved hardware
+ and should not be enabled without testing. The kernel commandline
+ option "efi=disable_pci_busmaster" or "efi=enable_busmaster" may
+ be used to override this option.
+
endmenu
config UEFI_CPER
@@ -39,7 +39,7 @@ OBJECT_FILES_NON_STANDARD := y
KCOV_INSTRUMENT := n
lib-y := efi-stub-helper.o gop.o secureboot.o tpm.o \
- random.o
+ random.o pci.o
# include the stub's generic dependencies from lib/ when building for ARM/arm64
arm-deps-y := fdt_rw.c fdt_ro.c fdt_wip.c fdt.c fdt_empty_tree.c fdt_sw.c
@@ -32,6 +32,8 @@ static unsigned long __chunk_size = EFI_READ_CHUNK_SIZE;
static int __section(.data) __nokaslr;
static int __section(.data) __quiet;
static bool __section(.data) efi_nosoftreserve;
+static int __section(.data) __disable_pci_busmaster =
+ IS_ENABLED(CONFIG_EFI_DISABLE_PCI_BUSMASTER);
static u16 efi_supported_rt_services_mask = EFI_RT_SUPPORTED_ALL;
@@ -54,6 +56,11 @@ bool __pure __efi_soft_reserve_enabled(void)
return !efi_nosoftreserve;
}
+int __pure disable_pci_busmaster(void)
+{
+ return __disable_pci_busmaster;
+}
+
#define EFI_MMAP_NR_SLACK_SLOTS 8
struct file_info {
@@ -507,6 +514,16 @@ efi_status_t efi_parse_options(char const *cmdline)
efi_nosoftreserve = 1;
}
+ if (!strncmp(str, "disable_pci_busmaster", 21)) {
+ str += strlen("disable_pci_busmaster");
+ __disable_pci_busmaster = 1;
+ }
+
+ if (!strncmp(str, "enable_pci_busmaster", 20)) {
+ str += strlen("enable_pci_busmaster");
+ __disable_pci_busmaster = 0;
+ }
+
/* Group words together, delimited by "," */
while (*str && *str != ' ' && *str != ',')
str++;
@@ -28,6 +28,7 @@
extern int __pure nokaslr(void);
extern int __pure is_quiet(void);
extern int __pure novamap(void);
+extern int __pure disable_pci_busmaster(void);
#define pr_efi(sys_table, msg) do { \
if (!is_quiet()) efi_printk(sys_table, "EFI stub: "msg); \
new file mode 100644
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCI-related functions used by the EFI stub on multiple
+ * architectures.
+ *
+ * Copyright 2019 Google, LLC
+ */
+
+#include <linux/efi.h>
+#include <linux/pci.h>
+
+#include <asm/efi.h>
+
+#include "efistub.h"
+
+void efi_pci_disable_bridge_busmaster(efi_system_table_t *sys_table_arg)
+{
+ efi_status_t status;
+ void **pci_handle = NULL;
+ efi_guid_t pci_proto = EFI_PCI_IO_PROTOCOL_GUID;
+ unsigned long size = 0;
+ unsigned long nr_pci;
+ u16 class, command;
+ int i;
+
+ if (efi_is_mixed_mode())
+ return;
+
+ if (!disable_pci_busmaster())
+ return;
+
+ status = efi_call_early(locate_handle,
+ EFI_LOCATE_BY_PROTOCOL,
+ &pci_proto, NULL, &size, pci_handle);
+
+ if (status == EFI_BUFFER_TOO_SMALL) {
+ status = efi_call_early(allocate_pool,
+ EFI_LOADER_DATA,
+ size, (void **)&pci_handle);
+
+ if (status != EFI_SUCCESS) {
+ pr_efi_err(sys_table_arg,
+ "Failed to allocate memory for 'pci_handle'\n");
+ return;
+ }
+
+ status = efi_call_early(locate_handle,
+ EFI_LOCATE_BY_PROTOCOL, &pci_proto,
+ NULL, &size, pci_handle);
+ }
+
+ if (status != EFI_SUCCESS)
+ goto free_handle;
+
+ nr_pci = size / sizeof(void *);
+ for (i = 0; i < nr_pci; i++) {
+ efi_pci_io_protocol_t *pci = NULL;
+ unsigned long handle = (unsigned long)pci_handle[i];
+
+ status = efi_call_early(handle_protocol, (efi_handle_t)handle,
+ &pci_proto, (void **)&pci);
+ if (status != EFI_SUCCESS || !pci)
+ continue;
+
+ status = efi_call_proto(efi_pci_io_protocol, pci.read, pci,
+ EfiPciIoWidthUint16, PCI_CLASS_DEVICE,
+ 1, &class);
+
+ if (status != EFI_SUCCESS || class != PCI_CLASS_BRIDGE_PCI)
+ continue;
+
+ /* Disable busmastering */
+ status = efi_call_proto(efi_pci_io_protocol, pci.read, pci,
+ EfiPciIoWidthUint16, PCI_COMMAND, 1,
+ &command);
+ if (status != EFI_SUCCESS || !(command & PCI_COMMAND_MASTER))
+ continue;
+
+ command &= ~PCI_COMMAND_MASTER;
+ status = efi_call_proto(efi_pci_io_protocol, pci.write, pci,
+ EfiPciIoWidthUint16, PCI_COMMAND, 1,
+ &command);
+ if (status != EFI_SUCCESS)
+ pr_efi_err(sys_table_arg,
+ "Failed to disable PCI busmastering\n");
+ }
+
+free_handle:
+ efi_call_early(free_pool, pci_handle);
+}
@@ -388,11 +388,30 @@ typedef struct {
u64 write;
} efi_pci_io_protocol_access_64_t;
+typedef struct efi_pci_io_protocol efi_pci_io_protocol_t;
+
+typedef
+efi_status_t (*efi_pci_io_protocol_mem_t)(struct efi_pci_io_protocol *,
+ EFI_PCI_IO_PROTOCOL_WIDTH,
+ u8 bar_index, u64 offset,
+ unsigned long count, void *buffer);
+
+typedef
+efi_status_t (*efi_pci_io_protocol_cfg_t)(struct efi_pci_io_protocol *,
+ EFI_PCI_IO_PROTOCOL_WIDTH,
+ u32 offset, unsigned long count,
+ void *buffer);
+
typedef struct {
- void *read;
- void *write;
+ efi_pci_io_protocol_mem_t read;
+ efi_pci_io_protocol_mem_t write;
} efi_pci_io_protocol_access_t;
+typedef struct {
+ efi_pci_io_protocol_cfg_t read;
+ efi_pci_io_protocol_cfg_t write;
+} efi_pci_io_protocol_config_access_t;
+
typedef struct {
u32 poll_mem;
u32 poll_io;
@@ -433,12 +452,12 @@ typedef struct {
u64 romimage;
} efi_pci_io_protocol_64_t;
-typedef struct {
+struct efi_pci_io_protocol {
void *poll_mem;
void *poll_io;
efi_pci_io_protocol_access_t mem;
efi_pci_io_protocol_access_t io;
- efi_pci_io_protocol_access_t pci;
+ efi_pci_io_protocol_config_access_t pci;
void *copy_mem;
void *map;
void *unmap;
@@ -451,7 +470,7 @@ typedef struct {
void *set_bar_attributes;
uint64_t romsize;
void *romimage;
-} efi_pci_io_protocol_t;
+};
#define EFI_PCI_IO_ATTRIBUTE_ISA_MOTHERBOARD_IO 0x0001
#define EFI_PCI_IO_ATTRIBUTE_ISA_IO 0x0002
@@ -1662,6 +1681,8 @@ efi_status_t efi_random_get_seed(efi_system_table_t *sys_table_arg);
void efi_retrieve_tpm2_eventlog(efi_system_table_t *sys_table);
+void efi_pci_disable_bridge_busmaster(efi_system_table_t *sys_table);
+
/*
* Arch code can implement the following three template macros, avoiding
* reptition for the void/non-void return cases of {__,}efi_call_virt():
Add an option to disable the busmaster bit in the control register on all PCI bridges before calling ExitBootServices() and passing control to the runtime kernel. System firmware may configure the IOMMU to prevent malicious PCI devices from being able to attack the OS via DMA. However, since firmware can't guarantee that the OS is IOMMU-aware, it will tear down IOMMU configuration when ExitBootServices() is called. This leaves a window between where a hostile device could still cause damage before Linux configures the IOMMU again. If CONFIG_EFI_NO_PCI_BUSMASTER is enabled or the "efi=disable_pci_busmaster" commandline argument is passed, the EFI stub will clear the busmaster bit on all PCI bridges before ExitBootServices() is called. This will prevent any malicious PCI devices from being able to perform DMA until the kernel reenables busmastering after configuring the IOMMU. This option is disabled when in EFI mixed mode environments (ie, 64-bit kernels with a 32-bit EFI implementation). The current thunking code is unable to handle cases where 64-bit values are required, and is also hard to integrate with code that should run on both ARM and x86. This option will cause failures with some poorly behaved hardware and should not be enabled without testing. The kernel commandline option "efi=disable_pci_busmaster" or "efi=enable_pci_busmaster" may be used to override the default. Signed-off-by: Matthew Garrett <mjg59@google.com> Cc: Ard Biesheuvel <ardb@kernel.org> --- V2: Fix up support for ARM, add a helper to identify whether we're in mixed mode and exit gracefully if so, modify the naming and command line arguments to make it clearer that it's restricted to EFI and PCI. .../admin-guide/kernel-parameters.txt | 4 + arch/arm64/include/asm/efi.h | 1 + arch/x86/boot/compressed/eboot.c | 2 + arch/x86/include/asm/efi.h | 11 +++ drivers/firmware/efi/Kconfig | 22 +++++ drivers/firmware/efi/libstub/Makefile | 2 +- .../firmware/efi/libstub/efi-stub-helper.c | 17 ++++ drivers/firmware/efi/libstub/efistub.h | 1 + drivers/firmware/efi/libstub/pci.c | 90 +++++++++++++++++++ include/linux/efi.h | 31 +++++-- 10 files changed, 175 insertions(+), 6 deletions(-) create mode 100644 drivers/firmware/efi/libstub/pci.c