| Message ID | 20191216110113.30436-3-nsaenzjulienne@suse.de (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Lorenzo Pieralisi |
| Headers | show |
| Series | Raspberry Pi 4 PCIe support | expand |
On Mon, Dec 16, 2019 at 12:01:08PM +0100, Nicolas Saenz Julienne wrote: > This enables bcm2711's PCIe bus, which is hardwired to a VIA > Technologies XHCI USB 3.0 controller. > > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> > > --- > > Changes since v4: > - Rebase commit taking into account genet support series > > Changes since v3: > - Remove unwarranted comment > > Changes since v2: > - Remove unused interrupt-map > - correct dma-ranges to it's full size, non power of 2 bus DMA > constraints now supported in linux-next[1] > - add device_type > - rename alias from pcie_0 to pcie0 > > Changes since v1: > - remove linux,pci-domain > > [1] https://lkml.org/lkml/2019/11/21/235 > > arch/arm/boot/dts/bcm2711.dtsi | 31 ++++++++++++++++++++++++++++++- > 1 file changed, 30 insertions(+), 1 deletion(-) Olof as we discussed previously, I will not merge this dts change and drop it from the series - Nicolas should redirect it to arm-soc, please let me know if my understanding is correct. Thanks, Lorenzo > diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi > index e2f6ffb00aa9..b56388ce1216 100644 > --- a/arch/arm/boot/dts/bcm2711.dtsi > +++ b/arch/arm/boot/dts/bcm2711.dtsi > @@ -331,7 +331,36 @@ scb { > #address-cells = <2>; > #size-cells = <1>; > > - ranges = <0x0 0x7c000000 0x0 0xfc000000 0x03800000>; > + ranges = <0x0 0x7c000000 0x0 0xfc000000 0x03800000>, > + <0x6 0x00000000 0x6 0x00000000 0x40000000>; > + > + pcie0: pcie@7d500000 { > + compatible = "brcm,bcm2711-pcie"; > + reg = <0x0 0x7d500000 0x9310>; > + device_type = "pci"; > + #address-cells = <3>; > + #interrupt-cells = <1>; > + #size-cells = <2>; > + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "pcie", "msi"; > + interrupt-map-mask = <0x0 0x0 0x0 0x7>; > + interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 > + IRQ_TYPE_LEVEL_HIGH>; > + msi-controller; > + msi-parent = <&pcie0>; > + > + ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 > + 0x0 0x04000000>; > + /* > + * The wrapper around the PCIe block has a bug > + * preventing it from accessing beyond the first 3GB of > + * memory. > + */ > + dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 > + 0x0 0xc0000000>; > + brcm,enable-ssc; > + }; > > genet: ethernet@7d580000 { > compatible = "brcm,bcm2711-genet-v5"; > -- > 2.24.0 >
On 1/14/20 10:11 AM, Lorenzo Pieralisi wrote: > On Mon, Dec 16, 2019 at 12:01:08PM +0100, Nicolas Saenz Julienne wrote: >> This enables bcm2711's PCIe bus, which is hardwired to a VIA >> Technologies XHCI USB 3.0 controller. >> >> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> >> >> --- >> >> Changes since v4: >> - Rebase commit taking into account genet support series >> >> Changes since v3: >> - Remove unwarranted comment >> >> Changes since v2: >> - Remove unused interrupt-map >> - correct dma-ranges to it's full size, non power of 2 bus DMA >> constraints now supported in linux-next[1] >> - add device_type >> - rename alias from pcie_0 to pcie0 >> >> Changes since v1: >> - remove linux,pci-domain >> >> [1] https://lkml.org/lkml/2019/11/21/235 >> >> arch/arm/boot/dts/bcm2711.dtsi | 31 ++++++++++++++++++++++++++++++- >> 1 file changed, 30 insertions(+), 1 deletion(-) > > Olof as we discussed previously, I will not merge this dts change and > drop it from the series - Nicolas should redirect it to arm-soc, please > let me know if my understanding is correct. Correct, I will take patches 2, 5 and 6 through the Broadcom ARM SoC pull requests and you will take 1, 3 and 4.
On Mon, 16 Dec 2019 12:01:08 +0100, Nicolas Saenz Julienne <nsaenzjulienne@suse.de> wrote: > This enables bcm2711's PCIe bus, which is hardwired to a VIA > Technologies XHCI USB 3.0 controller. > > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> > > --- Applied to devicetree/next, thanks! -- Florian
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi index e2f6ffb00aa9..b56388ce1216 100644 --- a/arch/arm/boot/dts/bcm2711.dtsi +++ b/arch/arm/boot/dts/bcm2711.dtsi @@ -331,7 +331,36 @@ scb { #address-cells = <2>; #size-cells = <1>; - ranges = <0x0 0x7c000000 0x0 0xfc000000 0x03800000>; + ranges = <0x0 0x7c000000 0x0 0xfc000000 0x03800000>, + <0x6 0x00000000 0x6 0x00000000 0x40000000>; + + pcie0: pcie@7d500000 { + compatible = "brcm,bcm2711-pcie"; + reg = <0x0 0x7d500000 0x9310>; + device_type = "pci"; + #address-cells = <3>; + #interrupt-cells = <1>; + #size-cells = <2>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pcie", "msi"; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 + IRQ_TYPE_LEVEL_HIGH>; + msi-controller; + msi-parent = <&pcie0>; + + ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 + 0x0 0x04000000>; + /* + * The wrapper around the PCIe block has a bug + * preventing it from accessing beyond the first 3GB of + * memory. + */ + dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 + 0x0 0xc0000000>; + brcm,enable-ssc; + }; genet: ethernet@7d580000 { compatible = "brcm,bcm2711-genet-v5";
This enables bcm2711's PCIe bus, which is hardwired to a VIA Technologies XHCI USB 3.0 controller. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> --- Changes since v4: - Rebase commit taking into account genet support series Changes since v3: - Remove unwarranted comment Changes since v2: - Remove unused interrupt-map - correct dma-ranges to it's full size, non power of 2 bus DMA constraints now supported in linux-next[1] - add device_type - rename alias from pcie_0 to pcie0 Changes since v1: - remove linux,pci-domain [1] https://lkml.org/lkml/2019/11/21/235 arch/arm/boot/dts/bcm2711.dtsi | 31 ++++++++++++++++++++++++++++++- 1 file changed, 30 insertions(+), 1 deletion(-)