| Message ID | 20200402121148.1767-10-ansuelsmth@gmail.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Delegated to: | Lorenzo Pieralisi |
| Headers | show |
| Series | Multiple fixes in PCIe qcom driver | expand |
On Thu, Apr 02, 2020 at 02:11:46PM +0200, Ansuel Smith wrote: > Document qcom,pcie-ipq8064-v2 needed to use different phy_tx0_term_offset. > In ipq8064 phy_tx0_term_offset is 7, in rev 2, ipq8065 and other SoC it's > set to 0 by default. > > Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> > --- > .../devicetree/bindings/pci/qcom,pcie.txt | 42 +++++++++++++++++++ > 1 file changed, 42 insertions(+) > > diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt > index 6efcef040741..b699f126ea29 100644 > --- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt > +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt > @@ -5,6 +5,7 @@ > Value type: <stringlist> > Definition: Value should contain > - "qcom,pcie-ipq8064" for ipq8064 > + - "qcom,pcie-ipq8064-v2" for ipq8064 rev 2 or ipq8065 > - "qcom,pcie-apq8064" for apq8064 > - "qcom,pcie-apq8084" for apq8084 > - "qcom,pcie-msm8996" for msm8996 or apq8096 > @@ -295,6 +296,47 @@ > pinctrl-names = "default"; > }; > > +* Example for ipq8064 rev 2 or ipq8065 Just a new compatible string doesn't warrant a whole new example. > + pcie@1b500000 { > + compatible = "qcom,pcie-ipq8064-v2", "snps,dw-pcie"; > + reg = <0x1b500000 0x1000 > + 0x1b502000 0x80 > + 0x1b600000 0x100 > + 0x0ff00000 0x100000>; > + reg-names = "dbi", "elbi", "parf", "config"; > + device_type = "pci"; > + linux,pci-domain = <0>; > + bus-range = <0x00 0xff>; > + num-lanes = <1>; > + #address-cells = <3>; > + #size-cells = <2>; > + ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000 /* I/O */ > + 0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */ > + interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>; > + interrupt-names = "msi"; > + #interrupt-cells = <1>; > + interrupt-map-mask = <0 0 0 0x7>; > + interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ > + <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ > + <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ > + <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ > + clocks = <&gcc PCIE_A_CLK>, > + <&gcc PCIE_H_CLK>, > + <&gcc PCIE_PHY_CLK>, > + <&gcc PCIE_AUX_CLK>, > + <&gcc PCIE_ALT_REF_CLK>; > + clock-names = "core", "iface", "phy", "aux", "ref"; > + resets = <&gcc PCIE_ACLK_RESET>, > + <&gcc PCIE_HCLK_RESET>, > + <&gcc PCIE_POR_RESET>, > + <&gcc PCIE_PCI_RESET>, > + <&gcc PCIE_PHY_RESET>, > + <&gcc PCIE_EXT_RESET>; > + reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; > + pinctrl-0 = <&pcie_pins_default>; > + pinctrl-names = "default"; > + }; > + > * Example for apq8084 > pcie0@fc520000 { > compatible = "qcom,pcie-apq8084", "snps,dw-pcie"; > -- > 2.25.1 >
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt index 6efcef040741..b699f126ea29 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt @@ -5,6 +5,7 @@ Value type: <stringlist> Definition: Value should contain - "qcom,pcie-ipq8064" for ipq8064 + - "qcom,pcie-ipq8064-v2" for ipq8064 rev 2 or ipq8065 - "qcom,pcie-apq8064" for apq8064 - "qcom,pcie-apq8084" for apq8084 - "qcom,pcie-msm8996" for msm8996 or apq8096 @@ -295,6 +296,47 @@ pinctrl-names = "default"; }; +* Example for ipq8064 rev 2 or ipq8065 + pcie@1b500000 { + compatible = "qcom,pcie-ipq8064-v2", "snps,dw-pcie"; + reg = <0x1b500000 0x1000 + 0x1b502000 0x80 + 0x1b600000 0x100 + 0x0ff00000 0x100000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000 /* I/O */ + 0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */ + interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + clocks = <&gcc PCIE_A_CLK>, + <&gcc PCIE_H_CLK>, + <&gcc PCIE_PHY_CLK>, + <&gcc PCIE_AUX_CLK>, + <&gcc PCIE_ALT_REF_CLK>; + clock-names = "core", "iface", "phy", "aux", "ref"; + resets = <&gcc PCIE_ACLK_RESET>, + <&gcc PCIE_HCLK_RESET>, + <&gcc PCIE_POR_RESET>, + <&gcc PCIE_PCI_RESET>, + <&gcc PCIE_PHY_RESET>, + <&gcc PCIE_EXT_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; + pinctrl-0 = <&pcie_pins_default>; + pinctrl-names = "default"; + }; + * Example for apq8084 pcie0@fc520000 { compatible = "qcom,pcie-apq8084", "snps,dw-pcie";
Document qcom,pcie-ipq8064-v2 needed to use different phy_tx0_term_offset. In ipq8064 phy_tx0_term_offset is 7, in rev 2, ipq8065 and other SoC it's set to 0 by default. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> --- .../devicetree/bindings/pci/qcom,pcie.txt | 42 +++++++++++++++++++ 1 file changed, 42 insertions(+)