From patchwork Fri Apr 24 13:08:34 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jiaxun Yang X-Patchwork-Id: 11507845 X-Patchwork-Delegate: lorenzo.pieralisi@arm.com Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 814F5912 for ; Fri, 24 Apr 2020 13:10:23 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 5D94420776 for ; Fri, 24 Apr 2020 13:10:23 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=fail reason="signature verification failed" (2048-bit key) header.d=flygoat.com header.i=@flygoat.com header.b="cEt6N4IE" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727098AbgDXNKT (ORCPT ); Fri, 24 Apr 2020 09:10:19 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:58210 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726798AbgDXNKT (ORCPT ); Fri, 24 Apr 2020 09:10:19 -0400 Received: from vultr.net.flygoat.com (vultr.net.flygoat.com [IPv6:2001:19f0:6001:3633:5400:2ff:fe8c:553]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 3CD76C09B045; Fri, 24 Apr 2020 06:10:07 -0700 (PDT) Received: from localhost.localdomain (unknown [IPv6:2001:da8:20f:4430:250:56ff:fe9a:7470]) by vultr.net.flygoat.com (Postfix) with ESMTPSA id DB5172049A; Fri, 24 Apr 2020 13:10:04 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=flygoat.com; s=vultr; t=1587733807; bh=SAGZxafNPO8H/Hl2I90awokdzxBVf9SSykBRpibt+Dg=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=cEt6N4IEUCmFFUWB1hMxlH+SdyrgXTDniho3F9mULlj1gybft43dGdQyFNWN6ZtW5 0gSEMUouYoH/JYyX255KXJVi9do1K8lydMp0nhKe7eKtfYsTQ5hMp/tDZ3+tCetW1k 6Vtq0GMGuj21nLg5n3E/c136pPCMt5IQCdoN73VlOh4kdBaYZ0seDhW144CZdR9xjW Z5RPs47E14NRpWjYiwuI/rUG5yovMVsbUFZEqvOphR15dxpZlldPAhTG0XLfRbobdt AzXIJozzKlG+NJviG5fp7TRBw99Uu0vRQ1r+erUHx/SHY491UWQWZxP06gP/YDgQQr +ZcLgpMprH2tw== From: Jiaxun Yang To: linux-pci@vger.kernel.org Cc: Jiaxun Yang , Bjorn Helgaas , Rob Herring , Thomas Bogendoerfer , Huacai Chen , Lorenzo Pieralisi , Andrew Murray , Paul Burton , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-mips@vger.kernel.org Subject: [PATCH v5 3/6] PCI: Add Loongson PCI Controller support Date: Fri, 24 Apr 2020 21:08:34 +0800 Message-Id: <20200424130847.328584-4-jiaxun.yang@flygoat.com> X-Mailer: git-send-email 2.26.0.rc2 In-Reply-To: <20200424130847.328584-1-jiaxun.yang@flygoat.com> References: <20200424130847.328584-1-jiaxun.yang@flygoat.com> MIME-Version: 1.0 Sender: linux-pci-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org This controller can be found on Loongson-2K SoC, Loongson-3 systems with RS780E/LS7A PCH. The RS780E part of code was previously located at arch/mips/pci/ops-loongson3.c and now it can use generic PCI driver implementation. Signed-off-by: Jiaxun Yang --- v2: - Clean up according to rob's suggestions - Claim that it can't work as a module v3: - Fix a typo --- drivers/pci/controller/Kconfig | 9 + drivers/pci/controller/Makefile | 1 + drivers/pci/controller/pci-loongson.c | 257 ++++++++++++++++++++++++++ 3 files changed, 267 insertions(+) create mode 100644 drivers/pci/controller/pci-loongson.c diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig index 91bfdb784829..7d7e70402ebd 100644 --- a/drivers/pci/controller/Kconfig +++ b/drivers/pci/controller/Kconfig @@ -258,6 +258,16 @@ config PCI_HYPERV_INTERFACE The Hyper-V PCI Interface is a helper driver allows other drivers to have a common interface with the Hyper-V PCI frontend driver. +config PCI_LOONGSON + bool "LOONGSON PCI Controller" + depends on MACH_LOONGSON64 || COMPILE_TEST + depends on OF + depends on PCI_QUIRKS + default MACH_LOONGSON64 + help + Say Y here if you want to enable PCI controller support on + Loongson systems. + source "drivers/pci/controller/dwc/Kconfig" source "drivers/pci/controller/mobiveil/Kconfig" source "drivers/pci/controller/cadence/Kconfig" diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile index 158c59771824..fbac4b0190a0 100644 --- a/drivers/pci/controller/Makefile +++ b/drivers/pci/controller/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o obj-$(CONFIG_VMD) += vmd.o obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o +obj-$(CONFIG_PCI_LOONGSON) += pci-loongson.o # pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW obj-y += dwc/ obj-y += mobiveil/ diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c new file mode 100644 index 000000000000..0bd3b52c14fb --- /dev/null +++ b/drivers/pci/controller/pci-loongson.c @@ -0,0 +1,257 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Loongson PCI Host Controller Driver + * + * Copyright (C) 2020 Jiaxun Yang + */ + +#include +#include +#include +#include +#include + +#include "../pci.h" + +/* Device IDs */ +#define DEV_PCIE_PORT_0 0x7a09 +#define DEV_PCIE_PORT_1 0x7a19 +#define DEV_PCIE_PORT_2 0x7a29 + +#define DEV_LS2K_APB 0x7a02 +#define DEV_LS7A_CONF 0x7a10 +#define DEV_LS7A_LPC 0x7a0c + +#define FLAG_CFG0 BIT(0) +#define FLAG_CFG1 BIT(1) +#define FLAG_DEV_FIX BIT(2) + +struct loongson_pci { + void __iomem *cfg0_base; + void __iomem *cfg1_base; + struct platform_device *pdev; + u32 flags; +}; + +/* Fixup wrong class code in PCIe bridges */ +static void bridge_class_quirk(struct pci_dev *dev) +{ + dev->class = PCI_CLASS_BRIDGE_PCI << 8; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_0, bridge_class_quirk); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_1, bridge_class_quirk); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_2, bridge_class_quirk); + +static void system_bus_quirk(struct pci_dev *pdev) +{ + u16 tmp; + + pdev->mmio_always_on = 1; + pdev->non_compliant_bars = 1; + /* Enable MEM & IO Decoding */ + pci_read_config_word(pdev, PCI_STATUS, &tmp); + tmp |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY; + pci_write_config_word(pdev, PCI_STATUS, tmp); +} + +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_LS2K_APB, system_bus_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_LS7A_CONF, system_bus_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_LS7A_LPC, system_bus_quirk); + +static void loongson_mrrs_quirk(struct pci_dev *dev) +{ + struct pci_bus *bus = dev->bus; + struct pci_dev *bridge; + static const struct pci_device_id bridge_devids[] = { + { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_0) }, + { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_1) }, + { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_2) }, + { 0, }, + }; + + + /* look for the matching bridge */ + while (!pci_is_root_bus(bus)) { + bridge = bus->self; + bus = bus->parent; + /* + * Some Loongson PCIE ports has a h/w limitation of + * 256 bytes maximum read request size. It can't handle + * anything higher than this. So force this limit on + * any devices attached under these ports. + */ + if (pci_match_id(bridge_devids, bridge)) { + if (pcie_get_readrq(dev) > 256) { + dev_info(&dev->dev, "limiting MRRS to 256\n"); + pcie_set_readrq(dev, 256); + } + break; + } + } +} +DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, loongson_mrrs_quirk); + +static void __iomem *cfg1_map(struct loongson_pci *priv, int bus, int dev, + int func, int where) +{ + unsigned long addroff = 0x0; + + if (bus != 0) + addroff |= BIT(28); /* Type 1 Access */ + addroff |= (where & 0xff) | ((where & 0xf00) << 16); + addroff |= (bus << 16) | (dev << 11) | (func << 8); + return priv->cfg1_base + addroff; +} + +static void __iomem *cfg0_map(struct loongson_pci *priv, int bus, int dev, + int func, int where) +{ + unsigned long addroff = 0x0; + + if (bus != 0) + addroff |= BIT(24); /* Type 1 Access */ + addroff |= (bus << 16) | (dev << 11) | (func << 8) | where; + return priv->cfg0_base + addroff; +} + +void __iomem *pci_loongson_map_bus(struct pci_bus *bus, unsigned int devfn, + int where) +{ + unsigned char busnum = bus->number; + int device = PCI_SLOT(devfn); + int function = PCI_FUNC(devfn); + struct pci_host_bridge *bridge = pci_find_host_bridge(bus); + struct loongson_pci *priv = pci_host_bridge_priv(bridge); + + /* + * Do not read more than one device on the bus other than + * the host bridge. + */ + if (bus->primary != 0 && device > 0 && + priv->flags & FLAG_DEV_FIX) + return NULL; + + /* CFG0 can only access standard space */ + if (where < PCI_CFG_SPACE_SIZE && priv->flags & FLAG_CFG0 && + priv->cfg0_base) + return cfg0_map(priv, busnum, device, function, where); + + /* CFG1 can access exp space */ + if (where < PCI_CFG_SPACE_EXP_SIZE && priv->flags & FLAG_CFG1 && + priv->cfg1_base) + return cfg1_map(priv, busnum, device, function, where); + + return NULL; +} + +static int loongson_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq; + u8 val; + + irq = of_irq_parse_and_map_pci(dev, slot, pin); + if (irq > 0) + return irq; + + /* Care i8259 legacy systems */ + pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &val); + /* 0xff is also invalid */ + if (val == 0xff) + return 0; + + return val; +} + +/* H/w only accept 32-bit PCI operations */ +static struct pci_ops loongson_pci_ops = { + .map_bus = pci_loongson_map_bus, + .read = pci_generic_config_read32, + .write = pci_generic_config_write32, +}; + +static const struct of_device_id loongson_pci_of_match[] = { + { .compatible = "loongson,rs780e-pci", + .data = (void *)(FLAG_CFG0), }, + { .compatible = "loongson,ls2k-pci", + .data = (void *)(FLAG_CFG0 | FLAG_CFG1 | FLAG_DEV_FIX), }, + { .compatible = "loongson,ls7a-pci", + .data = (void *)(FLAG_CFG0 | FLAG_CFG1 | FLAG_DEV_FIX), }, + {} +}; + +static int loongson_pci_probe(struct platform_device *pdev) +{ + struct loongson_pci *priv; + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node; + struct pci_host_bridge *bridge; + struct resource *regs; + int err; + + if (!node) + return -ENODEV; + + bridge = devm_pci_alloc_host_bridge(dev, sizeof(*priv)); + if (!bridge) + return -ENODEV; + + priv = pci_host_bridge_priv(bridge); + priv->pdev = pdev; + priv->flags = (unsigned long)of_device_get_match_data(dev); + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!regs) { + dev_err(dev, "missing mem resources for cfg0\n"); + return -EINVAL; + } + + priv->cfg0_base = devm_pci_remap_cfg_resource(dev, regs); + if (IS_ERR(priv->cfg0_base)) + return PTR_ERR(priv->cfg0_base); + + /* CFG1 is optional */ + if (priv->flags & FLAG_CFG1) { + regs = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!regs) + dev_info(dev, "missing mem resource for cfg1\n"); + else { + priv->cfg1_base = devm_pci_remap_cfg_resource(dev, regs); + if (IS_ERR(priv->cfg1_base)) + priv->cfg1_base = NULL; + } + } + + + err = pci_parse_request_of_pci_ranges(dev, &bridge->windows, + &bridge->dma_ranges, NULL); + if (err) { + dev_err(dev, "Failed to get bridge resources\n"); + return err; + } + + bridge->dev.parent = dev; + bridge->sysdata = priv; + bridge->ops = &loongson_pci_ops; + bridge->map_irq = loongson_map_irq; + + err = pci_host_probe(bridge); + if (err) + return err; + + return 0; +} + +static struct platform_driver loongson_pci_driver = { + .driver = { + .name = "loongson-pci", + .of_match_table = loongson_pci_of_match, + }, + .probe = loongson_pci_probe, +}; +builtin_platform_driver(loongson_pci_driver);