diff mbox series

[1/3] PCI: iproc: Add bus number parameter to read/write functions

Message ID 20200730033747.18931-1-mark.tomlinson@alliedtelesis.co.nz (mailing list archive)
State Superseded, archived
Delegated to: Lorenzo Pieralisi
Headers show
Series [1/3] PCI: iproc: Add bus number parameter to read/write functions | expand

Commit Message

Mark Tomlinson July 30, 2020, 3:37 a.m. UTC 
This makes the read/write functions more generic, allowing them to be
used from other places.

Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
---
 drivers/pci/controller/pcie-iproc.c | 23 ++++++++++++-----------
 1 file changed, 12 insertions(+), 11 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pci/controller/pcie-iproc.c b/drivers/pci/controller/pcie-iproc.c
index 8c7f875acf7f..2c836eede42c 100644
--- a/drivers/pci/controller/pcie-iproc.c
+++ b/drivers/pci/controller/pcie-iproc.c
@@ -660,13 +660,13 @@  static void __iomem *iproc_pcie_bus_map_cfg_bus(struct pci_bus *bus,
 				      where);
 }
 
-static int iproc_pci_raw_config_read32(struct iproc_pcie *pcie,
+static int iproc_pci_raw_config_read32(struct iproc_pcie *pcie, int busno,
 				       unsigned int devfn, int where,
 				       int size, u32 *val)
 {
 	void __iomem *addr;
 
-	addr = iproc_pcie_map_cfg_bus(pcie, 0, devfn, where & ~0x3);
+	addr = iproc_pcie_map_cfg_bus(pcie, busno, devfn, where & ~0x3);
 	if (!addr) {
 		*val = ~0;
 		return PCIBIOS_DEVICE_NOT_FOUND;
@@ -680,14 +680,14 @@  static int iproc_pci_raw_config_read32(struct iproc_pcie *pcie,
 	return PCIBIOS_SUCCESSFUL;
 }
 
-static int iproc_pci_raw_config_write32(struct iproc_pcie *pcie,
+static int iproc_pci_raw_config_write32(struct iproc_pcie *pcie, int busno,
 					unsigned int devfn, int where,
 					int size, u32 val)
 {
 	void __iomem *addr;
 	u32 mask, tmp;
 
-	addr = iproc_pcie_map_cfg_bus(pcie, 0, devfn, where & ~0x3);
+	addr = iproc_pcie_map_cfg_bus(pcie, busno, devfn, where & ~0x3);
 	if (!addr)
 		return PCIBIOS_DEVICE_NOT_FOUND;
 
@@ -793,7 +793,7 @@  static int iproc_pcie_check_link(struct iproc_pcie *pcie)
 	}
 
 	/* make sure we are not in EP mode */
-	iproc_pci_raw_config_read32(pcie, 0, PCI_HEADER_TYPE, 1, &hdr_type);
+	iproc_pci_raw_config_read32(pcie, 0, 0, PCI_HEADER_TYPE, 1, &hdr_type);
 	if ((hdr_type & 0x7f) != PCI_HEADER_TYPE_BRIDGE) {
 		dev_err(dev, "in EP mode, hdr=%#02x\n", hdr_type);
 		return -EFAULT;
@@ -803,15 +803,16 @@  static int iproc_pcie_check_link(struct iproc_pcie *pcie)
 #define PCI_BRIDGE_CTRL_REG_OFFSET	0x43c
 #define PCI_CLASS_BRIDGE_MASK		0xffff00
 #define PCI_CLASS_BRIDGE_SHIFT		8
-	iproc_pci_raw_config_read32(pcie, 0, PCI_BRIDGE_CTRL_REG_OFFSET,
+	iproc_pci_raw_config_read32(pcie, 0, 0, PCI_BRIDGE_CTRL_REG_OFFSET,
 				    4, &class);
 	class &= ~PCI_CLASS_BRIDGE_MASK;
 	class |= (PCI_CLASS_BRIDGE_PCI << PCI_CLASS_BRIDGE_SHIFT);
-	iproc_pci_raw_config_write32(pcie, 0, PCI_BRIDGE_CTRL_REG_OFFSET,
+	iproc_pci_raw_config_write32(pcie, 0, 0, PCI_BRIDGE_CTRL_REG_OFFSET,
 				     4, class);
 
 	/* check link status to see if link is active */
-	iproc_pci_raw_config_read32(pcie, 0, IPROC_PCI_EXP_CAP + PCI_EXP_LNKSTA,
+	iproc_pci_raw_config_read32(pcie, 0, 0,
+				    IPROC_PCI_EXP_CAP + PCI_EXP_LNKSTA,
 				    2, &link_status);
 	if (link_status & PCI_EXP_LNKSTA_NLW)
 		link_is_active = true;
@@ -821,19 +822,19 @@  static int iproc_pcie_check_link(struct iproc_pcie *pcie)
 #define PCI_TARGET_LINK_SPEED_MASK	0xf
 #define PCI_TARGET_LINK_SPEED_GEN2	0x2
 #define PCI_TARGET_LINK_SPEED_GEN1	0x1
-		iproc_pci_raw_config_read32(pcie, 0,
+		iproc_pci_raw_config_read32(pcie, 0, 0,
 					    IPROC_PCI_EXP_CAP + PCI_EXP_LNKCTL2,
 					    4, &link_ctrl);
 		if ((link_ctrl & PCI_TARGET_LINK_SPEED_MASK) ==
 		    PCI_TARGET_LINK_SPEED_GEN2) {
 			link_ctrl &= ~PCI_TARGET_LINK_SPEED_MASK;
 			link_ctrl |= PCI_TARGET_LINK_SPEED_GEN1;
-			iproc_pci_raw_config_write32(pcie, 0,
+			iproc_pci_raw_config_write32(pcie, 0, 0,
 					IPROC_PCI_EXP_CAP + PCI_EXP_LNKCTL2,
 					4, link_ctrl);
 			msleep(100);
 
-			iproc_pci_raw_config_read32(pcie, 0,
+			iproc_pci_raw_config_read32(pcie, 0, 0,
 					IPROC_PCI_EXP_CAP + PCI_EXP_LNKSTA,
 					2, &link_status);
 			if (link_status & PCI_EXP_LNKSTA_NLW)