| Message ID | 20200916061500.1970090-7-hch@lst.de (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | [1/6] ARM/dma-mapping: remove a __arch_page_to_dma #error | expand |
On Wed, Sep 16, 2020 at 08:14:59AM +0200, Christoph Hellwig wrote: > From: Jim Quinlan <james.quinlan@broadcom.com> > > The new field 'dma_range_map' in struct device is used to facilitate the > use of single or multiple offsets between mapping regions of cpu addrs and > dma addrs. It subsumes the role of "dev->dma_pfn_offset" which was only > capable of holding a single uniform offset and had no region bounds > checking. > > The function of_dma_get_range() has been modified so that it takes a single > argument -- the device node -- and returns a map, NULL, or an error code. > The map is an array that holds the information regarding the DMA regions. > Each range entry contains the address offset, the cpu_start address, the > dma_start address, and the size of the region. > > of_dma_configure() is the typical manner to set range offsets but there are > a number of ad hoc assignments to "dev->dma_pfn_offset" in the kernel > driver code. These cases now invoke the function > dma_direct_set_offset(dev, cpu_addr, dma_addr, size). > > Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com> > [hch: various interface cleanups] > Signed-off-by: Christoph Hellwig <hch@lst.de> > Tested-by: Nathan Chancellor <natechancellor@gmail.com> > --- > arch/arm/include/asm/dma-direct.h | 9 +-- > arch/arm/mach-keystone/keystone.c | 17 ++--- > arch/arm/mach-omap1/include/mach/memory.h | 4 + > arch/sh/drivers/pci/pcie-sh7786.c | 9 ++- > arch/x86/pci/sta2x11-fixup.c | 6 +- > drivers/acpi/arm64/iort.c | 6 +- > drivers/base/core.c | 2 + > drivers/gpu/drm/sun4i/sun4i_backend.c | 8 +- > drivers/iommu/io-pgtable-arm.c | 2 +- > .../platform/sunxi/sun4i-csi/sun4i_csi.c | 9 ++- > .../platform/sunxi/sun6i-csi/sun6i_csi.c | 11 ++- > drivers/of/address.c | 73 ++++++++----------- > drivers/of/device.c | 44 ++++++----- > drivers/of/of_private.h | 11 +-- > drivers/of/unittest.c | 34 ++++++--- > drivers/remoteproc/remoteproc_core.c | 24 +++++- > .../staging/media/sunxi/cedrus/cedrus_hw.c | 10 ++- > include/linux/device.h | 4 +- > include/linux/dma-direct.h | 54 ++++++++++++-- > include/linux/dma-mapping.h | 9 ++- > kernel/dma/coherent.c | 7 +- > kernel/dma/direct.c | 51 ++++++++++++- > 22 files changed, 285 insertions(+), 119 deletions(-) > > diff --git a/arch/arm/include/asm/dma-direct.h b/arch/arm/include/asm/dma-direct.h > index fbcf4367b5cb1a..436544aeb83405 100644 > --- a/arch/arm/include/asm/dma-direct.h > +++ b/arch/arm/include/asm/dma-direct.h > @@ -12,8 +12,8 @@ > #ifndef __arch_pfn_to_dma > static inline dma_addr_t pfn_to_dma(struct device *dev, unsigned long pfn) > { > - if (dev) > - pfn -= dev->dma_pfn_offset; > + if (dev && dev->dma_range_map) > + pfn = PFN_DOWN(translate_phys_to_dma(dev, PFN_PHYS(pfn))); > return (dma_addr_t)__pfn_to_bus(pfn); > } > > @@ -21,9 +21,8 @@ static inline unsigned long dma_to_pfn(struct device *dev, dma_addr_t addr) > { > unsigned long pfn = __bus_to_pfn(addr); > > - if (dev) > - pfn += dev->dma_pfn_offset; > - > + if (dev && dev->dma_range_map) > + pfn = PFN_DOWN(translate_dma_to_phys(dev, PFN_PHYS(pfn))); > return pfn; > } > > diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c > index dcd031ba84c2e0..09a65c2dfd7327 100644 > --- a/arch/arm/mach-keystone/keystone.c > +++ b/arch/arm/mach-keystone/keystone.c > @@ -8,6 +8,7 @@ > */ > #include <linux/io.h> > #include <linux/of.h> > +#include <linux/dma-mapping.h> > #include <linux/init.h> > #include <linux/of_platform.h> > #include <linux/of_address.h> > @@ -25,8 +26,6 @@ > #include "keystone.h" > > #ifdef CONFIG_ARM_LPAE > -static unsigned long keystone_dma_pfn_offset __read_mostly; > - > static int keystone_platform_notifier(struct notifier_block *nb, > unsigned long event, void *data) > { > @@ -39,9 +38,12 @@ static int keystone_platform_notifier(struct notifier_block *nb, > return NOTIFY_BAD; > > if (!dev->of_node) { > - dev->dma_pfn_offset = keystone_dma_pfn_offset; > - dev_err(dev, "set dma_pfn_offset%08lx\n", > - dev->dma_pfn_offset); > + int ret = dma_direct_set_offset(dev, KEYSTONE_HIGH_PHYS_START, > + KEYSTONE_LOW_PHYS_START, > + KEYSTONE_HIGH_PHYS_SIZE); > + dev_err(dev, "set dma_offset%08llx%s\n", > + KEYSTONE_HIGH_PHYS_START - KEYSTONE_LOW_PHYS_START, > + ret ? " failed" : ""); > } > return NOTIFY_OK; > } > @@ -54,11 +56,8 @@ static struct notifier_block platform_nb = { > static void __init keystone_init(void) > { > #ifdef CONFIG_ARM_LPAE > - if (PHYS_OFFSET >= KEYSTONE_HIGH_PHYS_START) { > - keystone_dma_pfn_offset = PFN_DOWN(KEYSTONE_HIGH_PHYS_START - > - KEYSTONE_LOW_PHYS_START); > + if (PHYS_OFFSET >= KEYSTONE_HIGH_PHYS_START) > bus_register_notifier(&platform_bus_type, &platform_nb); > - } > #endif > keystone_pm_runtime_init(); > } > diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h > index e43697c3297bf2..1142560e0078f5 100644 > --- a/arch/arm/mach-omap1/include/mach/memory.h > +++ b/arch/arm/mach-omap1/include/mach/memory.h > @@ -41,6 +41,10 @@ > __phys_to_pfn(__dma); \ > }) > > +#define __arch_dma_to_virt(dev, addr) ({ (void *) (is_lbus_device(dev) ? \ > + lbus_to_virt(addr) : \ > + __phys_to_virt(addr)); }) > + > #define __arch_virt_to_dma(dev, addr) ({ unsigned long __addr = (unsigned long)(addr); \ > (dma_addr_t) (is_lbus_device(dev) ? \ > virt_to_lbus(__addr) : \ > diff --git a/arch/sh/drivers/pci/pcie-sh7786.c b/arch/sh/drivers/pci/pcie-sh7786.c > index e0b568aaa7014c..4468289ab2cac7 100644 > --- a/arch/sh/drivers/pci/pcie-sh7786.c > +++ b/arch/sh/drivers/pci/pcie-sh7786.c > @@ -12,6 +12,7 @@ > #include <linux/io.h> > #include <linux/async.h> > #include <linux/delay.h> > +#include <linux/dma-mapping.h> > #include <linux/slab.h> > #include <linux/clk.h> > #include <linux/sh_clk.h> > @@ -31,6 +32,8 @@ struct sh7786_pcie_port { > static struct sh7786_pcie_port *sh7786_pcie_ports; > static unsigned int nr_ports; > static unsigned long dma_pfn_offset; > +size_t memsize; > +u64 memstart; > > static struct sh7786_pcie_hwops { > int (*core_init)(void); > @@ -301,7 +304,6 @@ static int __init pcie_init(struct sh7786_pcie_port *port) > struct pci_channel *chan = port->hose; > unsigned int data; > phys_addr_t memstart, memend; > - size_t memsize; > int ret, i, win; > > /* Begin initialization */ > @@ -368,8 +370,6 @@ static int __init pcie_init(struct sh7786_pcie_port *port) > memstart = ALIGN_DOWN(memstart, memsize); > memsize = roundup_pow_of_two(memend - memstart); > > - dma_pfn_offset = memstart >> PAGE_SHIFT; > - > /* > * If there's more than 512MB of memory, we need to roll over to > * LAR1/LAMR1. > @@ -487,7 +487,8 @@ int pcibios_map_platform_irq(const struct pci_dev *pdev, u8 slot, u8 pin) > > void pcibios_bus_add_device(struct pci_dev *pdev) > { > - pdev->dev.dma_pfn_offset = dma_pfn_offset; > + dma_direct_set_offset(&pdev->dev, __pa(memory_start), > + __pa(memory_start) - memstart, memsize); > } > > static int __init sh7786_pcie_core_init(void) > diff --git a/arch/x86/pci/sta2x11-fixup.c b/arch/x86/pci/sta2x11-fixup.c > index c313d784efabb9..324a207f99956b 100644 > --- a/arch/x86/pci/sta2x11-fixup.c > +++ b/arch/x86/pci/sta2x11-fixup.c > @@ -133,7 +133,7 @@ static void sta2x11_map_ep(struct pci_dev *pdev) > struct sta2x11_instance *instance = sta2x11_pdev_to_instance(pdev); > struct device *dev = &pdev->dev; > u32 amba_base, max_amba_addr; > - int i; > + int i, ret; > > if (!instance) > return; > @@ -141,7 +141,9 @@ static void sta2x11_map_ep(struct pci_dev *pdev) > pci_read_config_dword(pdev, AHB_BASE(0), &amba_base); > max_amba_addr = amba_base + STA2X11_AMBA_SIZE - 1; > > - dev->dma_pfn_offset = PFN_DOWN(-amba_base); > + ret = dma_direct_set_offset(dev, 0, amba_base, STA2X11_AMBA_SIZE); > + if (ret) > + dev_err(dev, "sta2x11: could not set DMA offset\n"); > > dev->bus_dma_limit = max_amba_addr; > pci_set_consistent_dma_mask(pdev, max_amba_addr); > diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c > index ec782e4a0fe419..de18c07ca02cc4 100644 > --- a/drivers/acpi/arm64/iort.c > +++ b/drivers/acpi/arm64/iort.c > @@ -18,6 +18,7 @@ > #include <linux/pci.h> > #include <linux/platform_device.h> > #include <linux/slab.h> > +#include <linux/dma-mapping.h> > > #define IORT_TYPE_MASK(type) (1 << (type)) > #define IORT_MSI_TYPE (1 << ACPI_IORT_NODE_ITS_GROUP) > @@ -1184,8 +1185,9 @@ void iort_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size) > *dma_addr = dmaaddr; > *dma_size = size; > > - dev->dma_pfn_offset = PFN_DOWN(offset); > - dev_dbg(dev, "dma_pfn_offset(%#08llx)\n", offset); > + ret = dma_direct_set_offset(dev, dmaaddr + offset, dmaaddr, size); > + > + dev_dbg(dev, "dma_offset(%#08llx)%s\n", offset, ret ? " failed!" : ""); > } > > static void __init acpi_iort_register_irq(int hwirq, const char *name, > diff --git a/drivers/base/core.c b/drivers/base/core.c > index f6f620aa94086d..b893056e39459c 100644 > --- a/drivers/base/core.c > +++ b/drivers/base/core.c > @@ -1792,6 +1792,8 @@ static void device_release(struct kobject *kobj) > */ > devres_release_all(dev); > > + kfree(dev->dma_range_map); > + > if (dev->release) > dev->release(dev); > else if (dev->type && dev->type->release) > diff --git a/drivers/gpu/drm/sun4i/sun4i_backend.c b/drivers/gpu/drm/sun4i/sun4i_backend.c > index 072ea113e6be55..05e9f0d28196d9 100644 > --- a/drivers/gpu/drm/sun4i/sun4i_backend.c > +++ b/drivers/gpu/drm/sun4i/sun4i_backend.c > @@ -11,6 +11,7 @@ > #include <linux/module.h> > #include <linux/of_device.h> > #include <linux/of_graph.h> > +#include <linux/dma-mapping.h> > #include <linux/platform_device.h> > #include <linux/reset.h> > > @@ -811,8 +812,13 @@ static int sun4i_backend_bind(struct device *dev, struct device *master, > * because of an old DT, we need to set the DMA offset by hand > * on our device since the RAM mapping is at 0 for the DMA bus, > * unlike the CPU. > + * > + * XXX(hch): this has no business in a driver and needs to move > + * to the device tree. > */ > - drm->dev->dma_pfn_offset = PHYS_PFN_OFFSET; > + ret = dma_direct_set_offset(drm->dev, PHYS_OFFSET, 0, SZ_4G); > + if (ret) > + return ret; > } > > backend->engine.node = dev->of_node; > diff --git a/drivers/iommu/io-pgtable-arm.c b/drivers/iommu/io-pgtable-arm.c > index dc7bcf858b6d2d..d77e881516a4ab 100644 > --- a/drivers/iommu/io-pgtable-arm.c > +++ b/drivers/iommu/io-pgtable-arm.c > @@ -751,7 +751,7 @@ arm_lpae_alloc_pgtable(struct io_pgtable_cfg *cfg) > if (cfg->oas > ARM_LPAE_MAX_ADDR_BITS) > return NULL; > > - if (!selftest_running && cfg->iommu_dev->dma_pfn_offset) { > + if (!selftest_running && cfg->iommu_dev->dma_range_map) { > dev_err(cfg->iommu_dev, "Cannot accommodate DMA offset for IOMMU page tables\n"); > return NULL; > } > diff --git a/drivers/media/platform/sunxi/sun4i-csi/sun4i_csi.c b/drivers/media/platform/sunxi/sun4i-csi/sun4i_csi.c > index 5319eb1ab30927..307997ee7f96a2 100644 > --- a/drivers/media/platform/sunxi/sun4i-csi/sun4i_csi.c > +++ b/drivers/media/platform/sunxi/sun4i-csi/sun4i_csi.c > @@ -7,6 +7,7 @@ > */ > > #include <linux/clk.h> > +#include <linux/dma-mapping.h> > #include <linux/interrupt.h> > #include <linux/module.h> > #include <linux/mutex.h> > @@ -182,8 +183,14 @@ static int sun4i_csi_probe(struct platform_device *pdev) > if (ret) > return ret; > } else { > + /* > + * XXX(hch): this has no business in a driver and needs to move > + * to the device tree. > + */ > #ifdef PHYS_PFN_OFFSET > - csi->dev->dma_pfn_offset = PHYS_PFN_OFFSET; > + ret = dma_direct_set_offset(csi->dev, PHYS_OFFSET, 0, SZ_4G); > + if (ret) > + return ret; > #endif > } > > diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c > index 28e89340fed981..e69e14379fc6e4 100644 > --- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c > +++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c > @@ -899,8 +899,15 @@ static int sun6i_csi_probe(struct platform_device *pdev) > return -ENOMEM; > > sdev->dev = &pdev->dev; > - /* The DMA bus has the memory mapped at 0 */ > - sdev->dev->dma_pfn_offset = PHYS_OFFSET >> PAGE_SHIFT; > + /* > + * The DMA bus has the memory mapped at 0. > + * > + * XXX(hch): this has no business in a driver and needs to move > + * to the device tree. > + */ > + ret = dma_direct_set_offset(sdev->dev, PHYS_OFFSET, 0, SZ_4G); > + if (ret) > + return ret; > > ret = sun6i_csi_resource_request(sdev, pdev); > if (ret) > diff --git a/drivers/of/address.c b/drivers/of/address.c > index da4f7341323f22..a49ef87aaaf21c 100644 > --- a/drivers/of/address.c > +++ b/drivers/of/address.c > @@ -13,6 +13,7 @@ > #include <linux/sizes.h> > #include <linux/slab.h> > #include <linux/string.h> > +#include <linux/dma-direct.h> /* for bus_dma_region */ > > #include "of_private.h" > > @@ -937,33 +938,33 @@ void __iomem *of_io_request_and_map(struct device_node *np, int index, > } > EXPORT_SYMBOL(of_io_request_and_map); > > +#ifdef CONFIG_HAS_DMA > /** > - * of_dma_get_range - Get DMA range info > + * of_dma_get_range - Get DMA range info and put it into a map array > * @np: device node to get DMA range info > - * @dma_addr: pointer to store initial DMA address of DMA range > - * @paddr: pointer to store initial CPU address of DMA range > - * @size: pointer to store size of DMA range > + * @map: dma range structure to return > * > * Look in bottom up direction for the first "dma-ranges" property > - * and parse it. > - * dma-ranges format: > + * and parse it. Put the information into a DMA offset map array. > + * > + * dma-ranges format: > * DMA addr (dma_addr) : naddr cells > * CPU addr (phys_addr_t) : pna cells > * size : nsize cells > * > - * It returns -ENODEV if "dma-ranges" property was not found > - * for this device in DT. > + * It returns -ENODEV if "dma-ranges" property was not found for this > + * device in the DT. > */ > -int of_dma_get_range(struct device_node *np, u64 *dma_addr, u64 *paddr, u64 *size) > +int of_dma_get_range(struct device_node *np, const struct bus_dma_region **map) > { > struct device_node *node = of_node_get(np); > const __be32 *ranges = NULL; > - int len; > - int ret = 0; > bool found_dma_ranges = false; > struct of_range_parser parser; > struct of_range range; > - u64 dma_start = U64_MAX, dma_end = 0, dma_offset = 0; > + struct bus_dma_region *r; > + int len, num_ranges = 0; > + int ret = 0; > > while (node) { > ranges = of_get_property(node, "dma-ranges", &len); > @@ -989,49 +990,39 @@ int of_dma_get_range(struct device_node *np, u64 *dma_addr, u64 *paddr, u64 *siz > } > > of_dma_range_parser_init(&parser, node); > + for_each_of_range(&parser, &range) > + num_ranges++; > + > + r = kcalloc(num_ranges + 1, sizeof(*r), GFP_KERNEL); > + if (!r) { > + ret = -ENOMEM; > + goto out; > + } > > + /* > + * Record all info in the generic DMA ranges array for struct device. > + */ > + *map = r; > + of_dma_range_parser_init(&parser, node); > for_each_of_range(&parser, &range) { > pr_debug("dma_addr(%llx) cpu_addr(%llx) size(%llx)\n", > range.bus_addr, range.cpu_addr, range.size); > - > - if (dma_offset && range.cpu_addr - range.bus_addr != dma_offset) { > - pr_warn("Can't handle multiple dma-ranges with different offsets on node(%pOF)\n", node); > - /* Don't error out as we'd break some existing DTs */ > - continue; > - } > if (range.cpu_addr == OF_BAD_ADDR) { > pr_err("translation of DMA address(%llx) to CPU address failed node(%pOF)\n", > range.bus_addr, node); > continue; > } > - dma_offset = range.cpu_addr - range.bus_addr; > - > - /* Take lower and upper limits */ > - if (range.bus_addr < dma_start) > - dma_start = range.bus_addr; > - if (range.bus_addr + range.size > dma_end) > - dma_end = range.bus_addr + range.size; > - } > - > - if (dma_start >= dma_end) { > - ret = -EINVAL; > - pr_debug("Invalid DMA ranges configuration on node(%pOF)\n", > - node); > - goto out; > + r->cpu_start = range.cpu_addr; > + r->dma_start = range.bus_addr; > + r->size = range.size; > + r->offset = range.cpu_addr - range.bus_addr; > + r++; > } > - > - *dma_addr = dma_start; > - *size = dma_end - dma_start; > - *paddr = dma_start + dma_offset; > - > - pr_debug("final: dma_addr(%llx) cpu_addr(%llx) size(%llx)\n", > - *dma_addr, *paddr, *size); > - > out: > of_node_put(node); > - > return ret; > } > +#endif /* CONFIG_HAS_DMA */ > > /** > * of_dma_is_coherent - Check if device is coherent > diff --git a/drivers/of/device.c b/drivers/of/device.c > index b439c1e054349b..6e3ae7ebc33eeb 100644 > --- a/drivers/of/device.c > +++ b/drivers/of/device.c > @@ -5,7 +5,7 @@ > #include <linux/of_device.h> > #include <linux/of_address.h> > #include <linux/of_iommu.h> > -#include <linux/dma-mapping.h> > +#include <linux/dma-direct.h> /* for bus_dma_region */ > #include <linux/init.h> > #include <linux/module.h> > #include <linux/mod_devicetable.h> > @@ -90,14 +90,14 @@ int of_device_add(struct platform_device *ofdev) > int of_dma_configure_id(struct device *dev, struct device_node *np, > bool force_dma, const u32 *id) > { > - u64 dma_addr, paddr, size = 0; > - int ret; > - bool coherent; > - unsigned long offset; > const struct iommu_ops *iommu; > - u64 mask, end; > + const struct bus_dma_region *map = NULL; > + dma_addr_t dma_start = 0; > + u64 mask, end, size = 0; > + bool coherent; > + int ret; > > - ret = of_dma_get_range(np, &dma_addr, &paddr, &size); > + ret = of_dma_get_range(np, &map); > if (ret < 0) { > /* > * For legacy reasons, we have to assume some devices need > @@ -106,26 +106,35 @@ int of_dma_configure_id(struct device *dev, struct device_node *np, > */ > if (!force_dma) > return ret == -ENODEV ? 0 : ret; > - > - dma_addr = offset = 0; > } else { > - offset = PFN_DOWN(paddr - dma_addr); > + const struct bus_dma_region *r = map; > + dma_addr_t dma_end = 0; > + > + /* Determine the overall bounds of all DMA regions */ > + for (dma_start = ~(dma_addr_t)0; r->size; r++) { > + /* Take lower and upper limits */ > + if (r->dma_start < dma_start) > + dma_start = r->dma_start; > + if (r->dma_start + r->size > dma_end) > + dma_end = r->dma_start + r->size; > + } > + size = dma_end - dma_start; > > /* > * Add a work around to treat the size as mask + 1 in case > * it is defined in DT as a mask. > */ > if (size & 1) { > - dev_warn(dev, "Invalid size 0x%llx for dma-range\n", > + dev_warn(dev, "Invalid size 0x%llx for dma-range(s)\n", > size); > size = size + 1; > } > > if (!size) { > dev_err(dev, "Adjusted size 0x%llx invalid\n", size); > + kfree(map); > return -EINVAL; > } > - dev_dbg(dev, "dma_pfn_offset(%#08lx)\n", offset); > } > > /* > @@ -144,13 +153,11 @@ int of_dma_configure_id(struct device *dev, struct device_node *np, > else if (!size) > size = 1ULL << 32; > > - dev->dma_pfn_offset = offset; > - > /* > * Limit coherent and dma mask based on size and default mask > * set by the driver. > */ > - end = dma_addr + size - 1; > + end = dma_start + size - 1; > mask = DMA_BIT_MASK(ilog2(end) + 1); > dev->coherent_dma_mask &= mask; > *dev->dma_mask &= mask; > @@ -163,14 +170,17 @@ int of_dma_configure_id(struct device *dev, struct device_node *np, > coherent ? " " : " not "); > > iommu = of_iommu_configure(dev, np, id); > - if (PTR_ERR(iommu) == -EPROBE_DEFER) > + if (PTR_ERR(iommu) == -EPROBE_DEFER) { > + kfree(map); > return -EPROBE_DEFER; > + } > > dev_dbg(dev, "device is%sbehind an iommu\n", > iommu ? " " : " not "); > > - arch_setup_dma_ops(dev, dma_addr, size, iommu, coherent); > + arch_setup_dma_ops(dev, dma_start, size, iommu, coherent); > > + dev->dma_range_map = map; > return 0; > } > EXPORT_SYMBOL_GPL(of_dma_configure_id); > diff --git a/drivers/of/of_private.h b/drivers/of/of_private.h > index edc682249c0015..d9e6a324de0a77 100644 > --- a/drivers/of/of_private.h > +++ b/drivers/of/of_private.h > @@ -157,12 +157,13 @@ extern void __of_sysfs_remove_bin_file(struct device_node *np, > extern int of_bus_n_addr_cells(struct device_node *np); > extern int of_bus_n_size_cells(struct device_node *np); > > -#ifdef CONFIG_OF_ADDRESS > -extern int of_dma_get_range(struct device_node *np, u64 *dma_addr, > - u64 *paddr, u64 *size); > +struct bus_dma_region; > +#if defined(CONFIG_OF_ADDRESS) && defined(CONFIG_HAS_DMA) > +int of_dma_get_range(struct device_node *np, > + const struct bus_dma_region **map); > #else > -static inline int of_dma_get_range(struct device_node *np, u64 *dma_addr, > - u64 *paddr, u64 *size) > +static inline int of_dma_get_range(struct device_node *np, > + const struct bus_dma_region **map) > { > return -ENODEV; > } > diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c > index 9b7e84bdc7d446..06cc988faf78b3 100644 > --- a/drivers/of/unittest.c > +++ b/drivers/of/unittest.c > @@ -7,6 +7,7 @@ > > #include <linux/memblock.h> > #include <linux/clk.h> > +#include <linux/dma-direct.h> /* to test phys_to_dma/dma_to_phys */ > #include <linux/err.h> > #include <linux/errno.h> > #include <linux/hashtable.h> > @@ -869,10 +870,11 @@ static void __init of_unittest_changeset(void) > } > > static void __init of_unittest_dma_ranges_one(const char *path, > - u64 expect_dma_addr, u64 expect_paddr, u64 expect_size) > + u64 expect_dma_addr, u64 expect_paddr) > { > +#ifdef CONFIG_HAS_DMA > struct device_node *np; > - u64 dma_addr, paddr, size; > + const struct bus_dma_region *map = NULL; > int rc; > > np = of_find_node_by_path(path); > @@ -881,28 +883,40 @@ static void __init of_unittest_dma_ranges_one(const char *path, > return; > } > > - rc = of_dma_get_range(np, &dma_addr, &paddr, &size); > + rc = of_dma_get_range(np, &map); > > unittest(!rc, "of_dma_get_range failed on node %pOF rc=%i\n", np, rc); > + > if (!rc) { > - unittest(size == expect_size, > - "of_dma_get_range wrong size on node %pOF size=%llx\n", np, size); > + phys_addr_t paddr; > + dma_addr_t dma_addr; > + struct device dev_bogus; > + > + dev_bogus.dma_range_map = map; > + paddr = dma_to_phys(&dev_bogus, expect_dma_addr); > + dma_addr = phys_to_dma(&dev_bogus, expect_paddr); > + > unittest(paddr == expect_paddr, > - "of_dma_get_range wrong phys addr (%llx) on node %pOF", paddr, np); > + "of_dma_get_range: wrong phys addr %pap (expecting %llx) on node %pOF\n", > + &paddr, expect_paddr, np); > unittest(dma_addr == expect_dma_addr, > - "of_dma_get_range wrong DMA addr (%llx) on node %pOF", dma_addr, np); > + "of_dma_get_range: wrong DMA addr %pad (expecting %llx) on node %pOF\n", > + &dma_addr, expect_dma_addr, np); > + > + kfree(map); > } > of_node_put(np); > +#endif > } > > static void __init of_unittest_parse_dma_ranges(void) > { > of_unittest_dma_ranges_one("/testcase-data/address-tests/device@70000000", > - 0x0, 0x20000000, 0x40000000); > + 0x0, 0x20000000); > of_unittest_dma_ranges_one("/testcase-data/address-tests/bus@80000000/device@1000", > - 0x100000000, 0x20000000, 0x2000000000); > + 0x100000000, 0x20000000); > of_unittest_dma_ranges_one("/testcase-data/address-tests/pci@90000000", > - 0x80000000, 0x20000000, 0x10000000); > + 0x80000000, 0x20000000); > } > > static void __init of_unittest_pci_dma_ranges(void) > diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c > index 7f90eeea67e279..8157dd491d2819 100644 > --- a/drivers/remoteproc/remoteproc_core.c > +++ b/drivers/remoteproc/remoteproc_core.c > @@ -23,6 +23,7 @@ > #include <linux/slab.h> > #include <linux/mutex.h> > #include <linux/dma-mapping.h> > +#include <linux/dma-direct.h> /* XXX: pokes into bus_dma_range */ > #include <linux/firmware.h> > #include <linux/string.h> > #include <linux/debugfs.h> > @@ -458,6 +459,25 @@ static void rproc_rvdev_release(struct device *dev) > kfree(rvdev); > } > > +static int copy_dma_range_map(struct device *to, struct device *from) > +{ > + const struct bus_dma_region *map = from->dma_range_map, *new_map, *r; > + int num_ranges = 0; > + > + if (!map) > + return 0; > + > + for (r = map; r->size; r++) > + num_ranges++; > + > + new_map = kmemdup(map, array_size(num_ranges + 1, sizeof(*map)), > + GFP_KERNEL); > + if (!new_map) > + return -ENOMEM; > + to->dma_range_map = new_map; > + return 0; > +} > + > /** > * rproc_handle_vdev() - handle a vdev fw resource > * @rproc: the remote processor > @@ -529,7 +549,9 @@ static int rproc_handle_vdev(struct rproc *rproc, struct fw_rsc_vdev *rsc, > /* Initialise vdev subdevice */ > snprintf(name, sizeof(name), "vdev%dbuffer", rvdev->index); > rvdev->dev.parent = &rproc->dev; > - rvdev->dev.dma_pfn_offset = rproc->dev.parent->dma_pfn_offset; > + ret = copy_dma_range_map(&rvdev->dev, rproc->dev.parent); > + if (ret) > + return ret; For the remoteproc part and with the checkpatch errors on this patch addressed: Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> > rvdev->dev.release = rproc_rvdev_release; > dev_set_name(&rvdev->dev, "%s#%s", dev_name(rvdev->dev.parent), name); > dev_set_drvdata(&rvdev->dev, rvdev); > diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_hw.c b/drivers/staging/media/sunxi/cedrus/cedrus_hw.c > index 1744e6fcc99980..bcf050a04ffc45 100644 > --- a/drivers/staging/media/sunxi/cedrus/cedrus_hw.c > +++ b/drivers/staging/media/sunxi/cedrus/cedrus_hw.c > @@ -227,11 +227,17 @@ int cedrus_hw_probe(struct cedrus_dev *dev) > * the RAM offset to the physcal addresses. > * > * This information will eventually be obtained from device-tree. > + * > + * XXX(hch): this has no business in a driver and needs to move > + * to the device tree. > */ > > #ifdef PHYS_PFN_OFFSET > - if (!(variant->quirks & CEDRUS_QUIRK_NO_DMA_OFFSET)) > - dev->dev->dma_pfn_offset = PHYS_PFN_OFFSET; > + if (!(variant->quirks & CEDRUS_QUIRK_NO_DMA_OFFSET)) { > + ret = dma_direct_set_offset(dev->dev, PHYS_OFFSET, 0, SZ_4G); > + if (ret) > + return ret; > + } > #endif > > ret = of_reserved_mem_device_init(dev->dev); > diff --git a/include/linux/device.h b/include/linux/device.h > index ca18da4768e3e8..1c78621fc3c01f 100644 > --- a/include/linux/device.h > +++ b/include/linux/device.h > @@ -466,7 +466,7 @@ struct dev_links_info { > * such descriptors. > * @bus_dma_limit: Limit of an upstream bridge or bus which imposes a smaller > * DMA limit than the device itself supports. > - * @dma_pfn_offset: offset of DMA memory range relatively of RAM > + * @dma_range_map: map for DMA memory ranges relative to that of RAM > * @dma_parms: A low level driver may set these to teach IOMMU code about > * segment limitations. > * @dma_pools: Dma pools (if dma'ble device). > @@ -561,7 +561,7 @@ struct device { > 64 bit addresses for consistent > allocations such descriptors. */ > u64 bus_dma_limit; /* upstream dma constraint */ > - unsigned long dma_pfn_offset; > + const struct bus_dma_region *dma_range_map; > > struct device_dma_parameters *dma_parms; > > diff --git a/include/linux/dma-direct.h b/include/linux/dma-direct.h > index 805010ea5346f9..c6b21acba7a459 100644 > --- a/include/linux/dma-direct.h > +++ b/include/linux/dma-direct.h > @@ -14,6 +14,41 @@ > > extern unsigned int zone_dma_bits; > > +/* > + * Record the mapping of CPU physical to DMA addresses for a given region. > + */ > +struct bus_dma_region { > + phys_addr_t cpu_start; > + dma_addr_t dma_start; > + u64 size; > + u64 offset; > +}; > + > +static inline dma_addr_t translate_phys_to_dma(struct device *dev, > + phys_addr_t paddr) > +{ > + const struct bus_dma_region *m; > + > + for (m = dev->dma_range_map; m->size; m++) > + if (paddr >= m->cpu_start && paddr - m->cpu_start < m->size) > + return (dma_addr_t)paddr - m->offset; > + > + /* make sure dma_capable fails when no translation is available */ > + return DMA_MAPPING_ERROR; > +} > + > +static inline phys_addr_t translate_dma_to_phys(struct device *dev, > + dma_addr_t dma_addr) > +{ > + const struct bus_dma_region *m; > + > + for (m = dev->dma_range_map; m->size; m++) > + if (dma_addr >= m->dma_start && dma_addr - m->dma_start < m->size) > + return (phys_addr_t)dma_addr + m->offset; > + > + return (phys_addr_t)-1; > +} > + > #ifdef CONFIG_ARCH_HAS_PHYS_TO_DMA > #include <asm/dma-direct.h> > #ifndef phys_to_dma_unencrypted > @@ -23,9 +58,9 @@ extern unsigned int zone_dma_bits; > static inline dma_addr_t phys_to_dma_unencrypted(struct device *dev, > phys_addr_t paddr) > { > - dma_addr_t dev_addr = (dma_addr_t)paddr; > - > - return dev_addr - ((dma_addr_t)dev->dma_pfn_offset << PAGE_SHIFT); > + if (dev->dma_range_map) > + return translate_phys_to_dma(dev, paddr); > + return paddr; > } > > /* > @@ -39,10 +74,14 @@ static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr) > return __sme_set(phys_to_dma_unencrypted(dev, paddr)); > } > > -static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t dev_addr) > +static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t dma_addr) > { > - phys_addr_t paddr = (phys_addr_t)dev_addr + > - ((phys_addr_t)dev->dma_pfn_offset << PAGE_SHIFT); > + phys_addr_t paddr; > + > + if (dev->dma_range_map) > + paddr = translate_dma_to_phys(dev, dma_addr); > + else > + paddr = dma_addr; > > return __sme_clr(paddr); > } > @@ -64,7 +103,8 @@ static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size, > > if (!dev->dma_mask) > return false; > - > + if (addr == DMA_MAPPING_ERROR) > + return false; > if (is_ram && !IS_ENABLED(CONFIG_ARCH_DMA_ADDR_T_64BIT) && > min(addr, end) < phys_to_dma(dev, PFN_PHYS(min_low_pfn))) > return false; > diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h > index df0bff2ea750e0..bb138ac6f5e63e 100644 > --- a/include/linux/dma-mapping.h > +++ b/include/linux/dma-mapping.h > @@ -730,4 +730,11 @@ static inline int dma_mmap_wc(struct device *dev, > #define dma_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) > #endif > > -#endif > +/* > + * Legacy interface to set up the dma offset map. Drivers really should not > + * actually use it, but we have a few legacy cases left. > + */ > +int dma_direct_set_offset(struct device *dev, phys_addr_t cpu_start, > + dma_addr_t dma_start, u64 size); > + > +#endif /* _LINUX_DMA_MAPPING_H */ > diff --git a/kernel/dma/coherent.c b/kernel/dma/coherent.c > index f85d14bbfcbe03..c0685196fb6d42 100644 > --- a/kernel/dma/coherent.c > +++ b/kernel/dma/coherent.c > @@ -7,7 +7,7 @@ > #include <linux/slab.h> > #include <linux/kernel.h> > #include <linux/module.h> > -#include <linux/dma-mapping.h> > +#include <linux/dma-direct.h> > > struct dma_coherent_mem { > void *virt_base; > @@ -32,9 +32,8 @@ static inline dma_addr_t dma_get_device_base(struct device *dev, > struct dma_coherent_mem * mem) > { > if (mem->use_dev_dma_pfn_offset) > - return (mem->pfn_base - dev->dma_pfn_offset) << PAGE_SHIFT; > - else > - return mem->device_base; > + return phys_to_dma(dev, PFN_PHYS(mem->pfn_base)); > + return mem->device_base; > } > > static int dma_init_coherent_memory(phys_addr_t phys_addr, > diff --git a/kernel/dma/direct.c b/kernel/dma/direct.c > index 54db9cfdaecc6d..750659f7447c4b 100644 > --- a/kernel/dma/direct.c > +++ b/kernel/dma/direct.c > @@ -13,6 +13,7 @@ > #include <linux/pfn.h> > #include <linux/vmalloc.h> > #include <linux/set_memory.h> > +#include <linux/slab.h> > > /* > * Most architectures use ZONE_DMA for the first 16 Megabytes, but some use it > @@ -66,8 +67,12 @@ static gfp_t dma_direct_optimal_gfp_mask(struct device *dev, u64 dma_mask, > > static bool dma_coherent_ok(struct device *dev, phys_addr_t phys, size_t size) > { > - return phys_to_dma_direct(dev, phys) + size - 1 <= > - min_not_zero(dev->coherent_dma_mask, dev->bus_dma_limit); > + dma_addr_t dma_addr = phys_to_dma_direct(dev, phys); > + > + if (dma_addr == DMA_MAPPING_ERROR) > + return false; > + return dma_addr + size - 1 <= > + min_not_zero(dev->coherent_dma_mask, dev->bus_dma_limit); > } > > /* > @@ -461,3 +466,45 @@ bool dma_direct_need_sync(struct device *dev, dma_addr_t dma_addr) > return !dev_is_dma_coherent(dev) || > is_swiotlb_buffer(dma_to_phys(dev, dma_addr)); > } > + > +/** > + * dma_direct_set_offset - Assign scalar offset for a single DMA range. > + * @dev: device pointer; needed to "own" the alloced memory. > + * @cpu_start: beginning of memory region covered by this offset. > + * @dma_start: beginning of DMA/PCI region covered by this offset. > + * @size: size of the region. > + * > + * This is for the simple case of a uniform offset which cannot > + * be discovered by "dma-ranges". > + * > + * It returns -ENOMEM if out of memory, -EINVAL if a map > + * already exists, 0 otherwise. > + * > + * Note: any call to this from a driver is a bug. The mapping needs > + * to be described by the device tree or other firmware interfaces. > + */ > +int dma_direct_set_offset(struct device *dev, phys_addr_t cpu_start, > + dma_addr_t dma_start, u64 size) > +{ > + struct bus_dma_region *map; > + u64 offset = (u64)cpu_start - (u64)dma_start; > + > + if (dev->dma_range_map) { > + dev_err(dev, "attempt to add DMA range to existing map\n"); > + return -EINVAL; > + } > + > + if (!offset) > + return 0; > + > + map = kcalloc(2, sizeof(*map), GFP_KERNEL); > + if (!map) > + return -ENOMEM; > + map[0].cpu_start = cpu_start; > + map[0].dma_start = dma_start; > + map[0].offset = offset; > + map[0].size = size; > + dev->dma_range_map = map; > + return 0; > +} > +EXPORT_SYMBOL_GPL(dma_direct_set_offset); > -- > 2.28.0 >
Hi Christoph, Jim, On Wed, Sep 16, 2020 at 8:30 AM Christoph Hellwig <hch@lst.de> wrote: > From: Jim Quinlan <james.quinlan@broadcom.com> > > The new field 'dma_range_map' in struct device is used to facilitate the > use of single or multiple offsets between mapping regions of cpu addrs and > dma addrs. It subsumes the role of "dev->dma_pfn_offset" which was only > capable of holding a single uniform offset and had no region bounds > checking. > > The function of_dma_get_range() has been modified so that it takes a single > argument -- the device node -- and returns a map, NULL, or an error code. > The map is an array that holds the information regarding the DMA regions. > Each range entry contains the address offset, the cpu_start address, the > dma_start address, and the size of the region. > > of_dma_configure() is the typical manner to set range offsets but there are > a number of ad hoc assignments to "dev->dma_pfn_offset" in the kernel > driver code. These cases now invoke the function > dma_direct_set_offset(dev, cpu_addr, dma_addr, size). > > Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com> > [hch: various interface cleanups] > Signed-off-by: Christoph Hellwig <hch@lst.de> > Tested-by: Nathan Chancellor <natechancellor@gmail.com> Thanks for your patch, which is now commit e0d072782c734d27 ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset") in v5.10-rc1, and to which I have bisected a PCIe failure on R-Car M2-W (r8a7791/koelsch). The first PCI host bridge, containing USB, probes fine: pci-rcar-gen2 ee090000.pci: host bridge /soc/pci@ee090000 ranges: pci-rcar-gen2 ee090000.pci: MEM 0x00ee080000..0x00ee08ffff -> 0x00ee080000 pci-rcar-gen2 ee090000.pci: PCI: revision 11 pci-rcar-gen2 ee090000.pci: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00] pci_bus 0000:00: root bus resource [mem 0xee080000-0xee08ffff] pci 0000:00:00.0: [1033:0000] type 00 class 0x060000 pci 0000:00:00.0: reg 0x10: [mem 0xee090800-0xee090bff] pci 0000:00:00.0: reg 0x14: [mem 0x40000000-0x7fffffff pref] pci 0000:00:01.0: [1033:0035] type 00 class 0x0c0310 pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x00000fff] pci 0000:00:01.0: supports D1 D2 pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot pci 0000:00:02.0: [1033:00e0] type 00 class 0x0c0320 pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x000000ff] pci 0000:00:02.0: supports D1 D2 pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot PCI: bus0: Fast back to back transfers disabled pci 0000:00:01.0: BAR 0: assigned [mem 0xee080000-0xee080fff] pci 0000:00:02.0: BAR 0: assigned [mem 0xee081000-0xee0810ff] pci 0000:00:01.0: enabling device (0140 -> 0142) pci 0000:00:02.0: enabling device (0140 -> 0142) The second PCI host bridge, connected to an (empty) PCIe slot, fails: pci-rcar-gen2 ee0d0000.pci: host bridge /soc/pci@ee0d0000 ranges: pci-rcar-gen2 ee0d0000.pci: MEM 0x00ee0c0000..0x00ee0cffff -> 0x00ee0c0000 pci-rcar-gen2 ee0d0000.pci: PCI: revision 11 pci-rcar-gen2 ee0d0000.pci: PCI host bridge to bus 0001:01 pci_bus 0001:01: root bus resource [bus 01] pci_bus 0001:01: root bus resource [mem 0xee0c0000-0xee0cffff] pci 0001:01:00.0: [1033:0000] type 00 class 0x060000 pci 0001:01:00.0: reg 0x10: [mem 0xee0d0800-0xee0d0bff] pci 0001:01:00.0: reg 0x14: [mem 0x40000000-0x7fffffff pref] pci 0001:01:01.0: [1033:0035] type 00 class 0x0c0310 pci 0001:01:01.0: reg 0x10: [mem 0x00000000-0x00000fff] pci 0001:01:01.0: supports D1 D2 pci 0001:01:01.0: PME# supported from D0 D1 D2 D3hot pci 0001:01:02.0: [1033:00e0] type 00 class 0x0c0320 pci 0001:01:02.0: reg 0x10: [mem 0x00000000-0x000000ff] pci 0001:01:02.0: supports D1 D2 pci 0001:01:02.0: PME# supported from D0 D1 D2 D3hot PCI: bus1: Fast back to back transfers disabled pci 0001:01:01.0: BAR 0: assigned [mem 0xee0c0000-0xee0c0fff] pci 0001:01:02.0: BAR 0: assigned [mem 0xee0c1000-0xee0c10ff] pci 0001:01:01.0: enabling device (0140 -> 0142) pci 0001:01:02.0: enabling device (0140 -> 0142) -rcar-pcie fe000000.pcie: host bridge /soc/pcie@fe000000 ranges: -rcar-pcie fe000000.pcie: IO 0x00fe100000..0x00fe1fffff -> 0x0000000000 -rcar-pcie fe000000.pcie: MEM 0x00fe200000..0x00fe3fffff -> 0x00fe200000 -rcar-pcie fe000000.pcie: MEM 0x0030000000..0x0037ffffff -> 0x0030000000 -rcar-pcie fe000000.pcie: MEM 0x0038000000..0x003fffffff -> 0x0038000000 -rcar-pcie fe000000.pcie: IB MEM 0x0040000000..0x00bfffffff -> 0x0040000000 -rcar-pcie fe000000.pcie: IB MEM 0x0200000000..0x02ffffffff -> 0x0200000000 -rcar-pcie fe000000.pcie: PCIe link down +rcar-pcie fe000000.pcie: Adjusted size 0x0 invalid +rcar-pcie: probe of fe000000.pcie failed with error -22 I've posted a patch "[PATCH] dma-mapping: Fix 32-bit overflow with CONFIG_ARM_LPAE=n" (https://lore.kernel.org/linux-arm-kernel/20201026152755.3738293-1-geert+renesas@glider.be/). Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
diff --git a/arch/arm/include/asm/dma-direct.h b/arch/arm/include/asm/dma-direct.h index fbcf4367b5cb1a..436544aeb83405 100644 --- a/arch/arm/include/asm/dma-direct.h +++ b/arch/arm/include/asm/dma-direct.h @@ -12,8 +12,8 @@ #ifndef __arch_pfn_to_dma static inline dma_addr_t pfn_to_dma(struct device *dev, unsigned long pfn) { - if (dev) - pfn -= dev->dma_pfn_offset; + if (dev && dev->dma_range_map) + pfn = PFN_DOWN(translate_phys_to_dma(dev, PFN_PHYS(pfn))); return (dma_addr_t)__pfn_to_bus(pfn); } @@ -21,9 +21,8 @@ static inline unsigned long dma_to_pfn(struct device *dev, dma_addr_t addr) { unsigned long pfn = __bus_to_pfn(addr); - if (dev) - pfn += dev->dma_pfn_offset; - + if (dev && dev->dma_range_map) + pfn = PFN_DOWN(translate_dma_to_phys(dev, PFN_PHYS(pfn))); return pfn; } diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c index dcd031ba84c2e0..09a65c2dfd7327 100644 --- a/arch/arm/mach-keystone/keystone.c +++ b/arch/arm/mach-keystone/keystone.c @@ -8,6 +8,7 @@ */ #include <linux/io.h> #include <linux/of.h> +#include <linux/dma-mapping.h> #include <linux/init.h> #include <linux/of_platform.h> #include <linux/of_address.h> @@ -25,8 +26,6 @@ #include "keystone.h" #ifdef CONFIG_ARM_LPAE -static unsigned long keystone_dma_pfn_offset __read_mostly; - static int keystone_platform_notifier(struct notifier_block *nb, unsigned long event, void *data) { @@ -39,9 +38,12 @@ static int keystone_platform_notifier(struct notifier_block *nb, return NOTIFY_BAD; if (!dev->of_node) { - dev->dma_pfn_offset = keystone_dma_pfn_offset; - dev_err(dev, "set dma_pfn_offset%08lx\n", - dev->dma_pfn_offset); + int ret = dma_direct_set_offset(dev, KEYSTONE_HIGH_PHYS_START, + KEYSTONE_LOW_PHYS_START, + KEYSTONE_HIGH_PHYS_SIZE); + dev_err(dev, "set dma_offset%08llx%s\n", + KEYSTONE_HIGH_PHYS_START - KEYSTONE_LOW_PHYS_START, + ret ? " failed" : ""); } return NOTIFY_OK; } @@ -54,11 +56,8 @@ static struct notifier_block platform_nb = { static void __init keystone_init(void) { #ifdef CONFIG_ARM_LPAE - if (PHYS_OFFSET >= KEYSTONE_HIGH_PHYS_START) { - keystone_dma_pfn_offset = PFN_DOWN(KEYSTONE_HIGH_PHYS_START - - KEYSTONE_LOW_PHYS_START); + if (PHYS_OFFSET >= KEYSTONE_HIGH_PHYS_START) bus_register_notifier(&platform_bus_type, &platform_nb); - } #endif keystone_pm_runtime_init(); } diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h index e43697c3297bf2..1142560e0078f5 100644 --- a/arch/arm/mach-omap1/include/mach/memory.h +++ b/arch/arm/mach-omap1/include/mach/memory.h @@ -41,6 +41,10 @@ __phys_to_pfn(__dma); \ }) +#define __arch_dma_to_virt(dev, addr) ({ (void *) (is_lbus_device(dev) ? \ + lbus_to_virt(addr) : \ + __phys_to_virt(addr)); }) + #define __arch_virt_to_dma(dev, addr) ({ unsigned long __addr = (unsigned long)(addr); \ (dma_addr_t) (is_lbus_device(dev) ? \ virt_to_lbus(__addr) : \ diff --git a/arch/sh/drivers/pci/pcie-sh7786.c b/arch/sh/drivers/pci/pcie-sh7786.c index e0b568aaa7014c..4468289ab2cac7 100644 --- a/arch/sh/drivers/pci/pcie-sh7786.c +++ b/arch/sh/drivers/pci/pcie-sh7786.c @@ -12,6 +12,7 @@ #include <linux/io.h> #include <linux/async.h> #include <linux/delay.h> +#include <linux/dma-mapping.h> #include <linux/slab.h> #include <linux/clk.h> #include <linux/sh_clk.h> @@ -31,6 +32,8 @@ struct sh7786_pcie_port { static struct sh7786_pcie_port *sh7786_pcie_ports; static unsigned int nr_ports; static unsigned long dma_pfn_offset; +size_t memsize; +u64 memstart; static struct sh7786_pcie_hwops { int (*core_init)(void); @@ -301,7 +304,6 @@ static int __init pcie_init(struct sh7786_pcie_port *port) struct pci_channel *chan = port->hose; unsigned int data; phys_addr_t memstart, memend; - size_t memsize; int ret, i, win; /* Begin initialization */ @@ -368,8 +370,6 @@ static int __init pcie_init(struct sh7786_pcie_port *port) memstart = ALIGN_DOWN(memstart, memsize); memsize = roundup_pow_of_two(memend - memstart); - dma_pfn_offset = memstart >> PAGE_SHIFT; - /* * If there's more than 512MB of memory, we need to roll over to * LAR1/LAMR1. @@ -487,7 +487,8 @@ int pcibios_map_platform_irq(const struct pci_dev *pdev, u8 slot, u8 pin) void pcibios_bus_add_device(struct pci_dev *pdev) { - pdev->dev.dma_pfn_offset = dma_pfn_offset; + dma_direct_set_offset(&pdev->dev, __pa(memory_start), + __pa(memory_start) - memstart, memsize); } static int __init sh7786_pcie_core_init(void) diff --git a/arch/x86/pci/sta2x11-fixup.c b/arch/x86/pci/sta2x11-fixup.c index c313d784efabb9..324a207f99956b 100644 --- a/arch/x86/pci/sta2x11-fixup.c +++ b/arch/x86/pci/sta2x11-fixup.c @@ -133,7 +133,7 @@ static void sta2x11_map_ep(struct pci_dev *pdev) struct sta2x11_instance *instance = sta2x11_pdev_to_instance(pdev); struct device *dev = &pdev->dev; u32 amba_base, max_amba_addr; - int i; + int i, ret; if (!instance) return; @@ -141,7 +141,9 @@ static void sta2x11_map_ep(struct pci_dev *pdev) pci_read_config_dword(pdev, AHB_BASE(0), &amba_base); max_amba_addr = amba_base + STA2X11_AMBA_SIZE - 1; - dev->dma_pfn_offset = PFN_DOWN(-amba_base); + ret = dma_direct_set_offset(dev, 0, amba_base, STA2X11_AMBA_SIZE); + if (ret) + dev_err(dev, "sta2x11: could not set DMA offset\n"); dev->bus_dma_limit = max_amba_addr; pci_set_consistent_dma_mask(pdev, max_amba_addr); diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c index ec782e4a0fe419..de18c07ca02cc4 100644 --- a/drivers/acpi/arm64/iort.c +++ b/drivers/acpi/arm64/iort.c @@ -18,6 +18,7 @@ #include <linux/pci.h> #include <linux/platform_device.h> #include <linux/slab.h> +#include <linux/dma-mapping.h> #define IORT_TYPE_MASK(type) (1 << (type)) #define IORT_MSI_TYPE (1 << ACPI_IORT_NODE_ITS_GROUP) @@ -1184,8 +1185,9 @@ void iort_dma_setup(struct device *dev, u64 *dma_addr, u64 *dma_size) *dma_addr = dmaaddr; *dma_size = size; - dev->dma_pfn_offset = PFN_DOWN(offset); - dev_dbg(dev, "dma_pfn_offset(%#08llx)\n", offset); + ret = dma_direct_set_offset(dev, dmaaddr + offset, dmaaddr, size); + + dev_dbg(dev, "dma_offset(%#08llx)%s\n", offset, ret ? " failed!" : ""); } static void __init acpi_iort_register_irq(int hwirq, const char *name, diff --git a/drivers/base/core.c b/drivers/base/core.c index f6f620aa94086d..b893056e39459c 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -1792,6 +1792,8 @@ static void device_release(struct kobject *kobj) */ devres_release_all(dev); + kfree(dev->dma_range_map); + if (dev->release) dev->release(dev); else if (dev->type && dev->type->release) diff --git a/drivers/gpu/drm/sun4i/sun4i_backend.c b/drivers/gpu/drm/sun4i/sun4i_backend.c index 072ea113e6be55..05e9f0d28196d9 100644 --- a/drivers/gpu/drm/sun4i/sun4i_backend.c +++ b/drivers/gpu/drm/sun4i/sun4i_backend.c @@ -11,6 +11,7 @@ #include <linux/module.h> #include <linux/of_device.h> #include <linux/of_graph.h> +#include <linux/dma-mapping.h> #include <linux/platform_device.h> #include <linux/reset.h> @@ -811,8 +812,13 @@ static int sun4i_backend_bind(struct device *dev, struct device *master, * because of an old DT, we need to set the DMA offset by hand * on our device since the RAM mapping is at 0 for the DMA bus, * unlike the CPU. + * + * XXX(hch): this has no business in a driver and needs to move + * to the device tree. */ - drm->dev->dma_pfn_offset = PHYS_PFN_OFFSET; + ret = dma_direct_set_offset(drm->dev, PHYS_OFFSET, 0, SZ_4G); + if (ret) + return ret; } backend->engine.node = dev->of_node; diff --git a/drivers/iommu/io-pgtable-arm.c b/drivers/iommu/io-pgtable-arm.c index dc7bcf858b6d2d..d77e881516a4ab 100644 --- a/drivers/iommu/io-pgtable-arm.c +++ b/drivers/iommu/io-pgtable-arm.c @@ -751,7 +751,7 @@ arm_lpae_alloc_pgtable(struct io_pgtable_cfg *cfg) if (cfg->oas > ARM_LPAE_MAX_ADDR_BITS) return NULL; - if (!selftest_running && cfg->iommu_dev->dma_pfn_offset) { + if (!selftest_running && cfg->iommu_dev->dma_range_map) { dev_err(cfg->iommu_dev, "Cannot accommodate DMA offset for IOMMU page tables\n"); return NULL; } diff --git a/drivers/media/platform/sunxi/sun4i-csi/sun4i_csi.c b/drivers/media/platform/sunxi/sun4i-csi/sun4i_csi.c index 5319eb1ab30927..307997ee7f96a2 100644 --- a/drivers/media/platform/sunxi/sun4i-csi/sun4i_csi.c +++ b/drivers/media/platform/sunxi/sun4i-csi/sun4i_csi.c @@ -7,6 +7,7 @@ */ #include <linux/clk.h> +#include <linux/dma-mapping.h> #include <linux/interrupt.h> #include <linux/module.h> #include <linux/mutex.h> @@ -182,8 +183,14 @@ static int sun4i_csi_probe(struct platform_device *pdev) if (ret) return ret; } else { + /* + * XXX(hch): this has no business in a driver and needs to move + * to the device tree. + */ #ifdef PHYS_PFN_OFFSET - csi->dev->dma_pfn_offset = PHYS_PFN_OFFSET; + ret = dma_direct_set_offset(csi->dev, PHYS_OFFSET, 0, SZ_4G); + if (ret) + return ret; #endif } diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c index 28e89340fed981..e69e14379fc6e4 100644 --- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c +++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c @@ -899,8 +899,15 @@ static int sun6i_csi_probe(struct platform_device *pdev) return -ENOMEM; sdev->dev = &pdev->dev; - /* The DMA bus has the memory mapped at 0 */ - sdev->dev->dma_pfn_offset = PHYS_OFFSET >> PAGE_SHIFT; + /* + * The DMA bus has the memory mapped at 0. + * + * XXX(hch): this has no business in a driver and needs to move + * to the device tree. + */ + ret = dma_direct_set_offset(sdev->dev, PHYS_OFFSET, 0, SZ_4G); + if (ret) + return ret; ret = sun6i_csi_resource_request(sdev, pdev); if (ret) diff --git a/drivers/of/address.c b/drivers/of/address.c index da4f7341323f22..a49ef87aaaf21c 100644 --- a/drivers/of/address.c +++ b/drivers/of/address.c @@ -13,6 +13,7 @@ #include <linux/sizes.h> #include <linux/slab.h> #include <linux/string.h> +#include <linux/dma-direct.h> /* for bus_dma_region */ #include "of_private.h" @@ -937,33 +938,33 @@ void __iomem *of_io_request_and_map(struct device_node *np, int index, } EXPORT_SYMBOL(of_io_request_and_map); +#ifdef CONFIG_HAS_DMA /** - * of_dma_get_range - Get DMA range info + * of_dma_get_range - Get DMA range info and put it into a map array * @np: device node to get DMA range info - * @dma_addr: pointer to store initial DMA address of DMA range - * @paddr: pointer to store initial CPU address of DMA range - * @size: pointer to store size of DMA range + * @map: dma range structure to return * * Look in bottom up direction for the first "dma-ranges" property - * and parse it. - * dma-ranges format: + * and parse it. Put the information into a DMA offset map array. + * + * dma-ranges format: * DMA addr (dma_addr) : naddr cells * CPU addr (phys_addr_t) : pna cells * size : nsize cells * - * It returns -ENODEV if "dma-ranges" property was not found - * for this device in DT. + * It returns -ENODEV if "dma-ranges" property was not found for this + * device in the DT. */ -int of_dma_get_range(struct device_node *np, u64 *dma_addr, u64 *paddr, u64 *size) +int of_dma_get_range(struct device_node *np, const struct bus_dma_region **map) { struct device_node *node = of_node_get(np); const __be32 *ranges = NULL; - int len; - int ret = 0; bool found_dma_ranges = false; struct of_range_parser parser; struct of_range range; - u64 dma_start = U64_MAX, dma_end = 0, dma_offset = 0; + struct bus_dma_region *r; + int len, num_ranges = 0; + int ret = 0; while (node) { ranges = of_get_property(node, "dma-ranges", &len); @@ -989,49 +990,39 @@ int of_dma_get_range(struct device_node *np, u64 *dma_addr, u64 *paddr, u64 *siz } of_dma_range_parser_init(&parser, node); + for_each_of_range(&parser, &range) + num_ranges++; + + r = kcalloc(num_ranges + 1, sizeof(*r), GFP_KERNEL); + if (!r) { + ret = -ENOMEM; + goto out; + } + /* + * Record all info in the generic DMA ranges array for struct device. + */ + *map = r; + of_dma_range_parser_init(&parser, node); for_each_of_range(&parser, &range) { pr_debug("dma_addr(%llx) cpu_addr(%llx) size(%llx)\n", range.bus_addr, range.cpu_addr, range.size); - - if (dma_offset && range.cpu_addr - range.bus_addr != dma_offset) { - pr_warn("Can't handle multiple dma-ranges with different offsets on node(%pOF)\n", node); - /* Don't error out as we'd break some existing DTs */ - continue; - } if (range.cpu_addr == OF_BAD_ADDR) { pr_err("translation of DMA address(%llx) to CPU address failed node(%pOF)\n", range.bus_addr, node); continue; } - dma_offset = range.cpu_addr - range.bus_addr; - - /* Take lower and upper limits */ - if (range.bus_addr < dma_start) - dma_start = range.bus_addr; - if (range.bus_addr + range.size > dma_end) - dma_end = range.bus_addr + range.size; - } - - if (dma_start >= dma_end) { - ret = -EINVAL; - pr_debug("Invalid DMA ranges configuration on node(%pOF)\n", - node); - goto out; + r->cpu_start = range.cpu_addr; + r->dma_start = range.bus_addr; + r->size = range.size; + r->offset = range.cpu_addr - range.bus_addr; + r++; } - - *dma_addr = dma_start; - *size = dma_end - dma_start; - *paddr = dma_start + dma_offset; - - pr_debug("final: dma_addr(%llx) cpu_addr(%llx) size(%llx)\n", - *dma_addr, *paddr, *size); - out: of_node_put(node); - return ret; } +#endif /* CONFIG_HAS_DMA */ /** * of_dma_is_coherent - Check if device is coherent diff --git a/drivers/of/device.c b/drivers/of/device.c index b439c1e054349b..6e3ae7ebc33eeb 100644 --- a/drivers/of/device.c +++ b/drivers/of/device.c @@ -5,7 +5,7 @@ #include <linux/of_device.h> #include <linux/of_address.h> #include <linux/of_iommu.h> -#include <linux/dma-mapping.h> +#include <linux/dma-direct.h> /* for bus_dma_region */ #include <linux/init.h> #include <linux/module.h> #include <linux/mod_devicetable.h> @@ -90,14 +90,14 @@ int of_device_add(struct platform_device *ofdev) int of_dma_configure_id(struct device *dev, struct device_node *np, bool force_dma, const u32 *id) { - u64 dma_addr, paddr, size = 0; - int ret; - bool coherent; - unsigned long offset; const struct iommu_ops *iommu; - u64 mask, end; + const struct bus_dma_region *map = NULL; + dma_addr_t dma_start = 0; + u64 mask, end, size = 0; + bool coherent; + int ret; - ret = of_dma_get_range(np, &dma_addr, &paddr, &size); + ret = of_dma_get_range(np, &map); if (ret < 0) { /* * For legacy reasons, we have to assume some devices need @@ -106,26 +106,35 @@ int of_dma_configure_id(struct device *dev, struct device_node *np, */ if (!force_dma) return ret == -ENODEV ? 0 : ret; - - dma_addr = offset = 0; } else { - offset = PFN_DOWN(paddr - dma_addr); + const struct bus_dma_region *r = map; + dma_addr_t dma_end = 0; + + /* Determine the overall bounds of all DMA regions */ + for (dma_start = ~(dma_addr_t)0; r->size; r++) { + /* Take lower and upper limits */ + if (r->dma_start < dma_start) + dma_start = r->dma_start; + if (r->dma_start + r->size > dma_end) + dma_end = r->dma_start + r->size; + } + size = dma_end - dma_start; /* * Add a work around to treat the size as mask + 1 in case * it is defined in DT as a mask. */ if (size & 1) { - dev_warn(dev, "Invalid size 0x%llx for dma-range\n", + dev_warn(dev, "Invalid size 0x%llx for dma-range(s)\n", size); size = size + 1; } if (!size) { dev_err(dev, "Adjusted size 0x%llx invalid\n", size); + kfree(map); return -EINVAL; } - dev_dbg(dev, "dma_pfn_offset(%#08lx)\n", offset); } /* @@ -144,13 +153,11 @@ int of_dma_configure_id(struct device *dev, struct device_node *np, else if (!size) size = 1ULL << 32; - dev->dma_pfn_offset = offset; - /* * Limit coherent and dma mask based on size and default mask * set by the driver. */ - end = dma_addr + size - 1; + end = dma_start + size - 1; mask = DMA_BIT_MASK(ilog2(end) + 1); dev->coherent_dma_mask &= mask; *dev->dma_mask &= mask; @@ -163,14 +170,17 @@ int of_dma_configure_id(struct device *dev, struct device_node *np, coherent ? " " : " not "); iommu = of_iommu_configure(dev, np, id); - if (PTR_ERR(iommu) == -EPROBE_DEFER) + if (PTR_ERR(iommu) == -EPROBE_DEFER) { + kfree(map); return -EPROBE_DEFER; + } dev_dbg(dev, "device is%sbehind an iommu\n", iommu ? " " : " not "); - arch_setup_dma_ops(dev, dma_addr, size, iommu, coherent); + arch_setup_dma_ops(dev, dma_start, size, iommu, coherent); + dev->dma_range_map = map; return 0; } EXPORT_SYMBOL_GPL(of_dma_configure_id); diff --git a/drivers/of/of_private.h b/drivers/of/of_private.h index edc682249c0015..d9e6a324de0a77 100644 --- a/drivers/of/of_private.h +++ b/drivers/of/of_private.h @@ -157,12 +157,13 @@ extern void __of_sysfs_remove_bin_file(struct device_node *np, extern int of_bus_n_addr_cells(struct device_node *np); extern int of_bus_n_size_cells(struct device_node *np); -#ifdef CONFIG_OF_ADDRESS -extern int of_dma_get_range(struct device_node *np, u64 *dma_addr, - u64 *paddr, u64 *size); +struct bus_dma_region; +#if defined(CONFIG_OF_ADDRESS) && defined(CONFIG_HAS_DMA) +int of_dma_get_range(struct device_node *np, + const struct bus_dma_region **map); #else -static inline int of_dma_get_range(struct device_node *np, u64 *dma_addr, - u64 *paddr, u64 *size) +static inline int of_dma_get_range(struct device_node *np, + const struct bus_dma_region **map) { return -ENODEV; } diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c index 9b7e84bdc7d446..06cc988faf78b3 100644 --- a/drivers/of/unittest.c +++ b/drivers/of/unittest.c @@ -7,6 +7,7 @@ #include <linux/memblock.h> #include <linux/clk.h> +#include <linux/dma-direct.h> /* to test phys_to_dma/dma_to_phys */ #include <linux/err.h> #include <linux/errno.h> #include <linux/hashtable.h> @@ -869,10 +870,11 @@ static void __init of_unittest_changeset(void) } static void __init of_unittest_dma_ranges_one(const char *path, - u64 expect_dma_addr, u64 expect_paddr, u64 expect_size) + u64 expect_dma_addr, u64 expect_paddr) { +#ifdef CONFIG_HAS_DMA struct device_node *np; - u64 dma_addr, paddr, size; + const struct bus_dma_region *map = NULL; int rc; np = of_find_node_by_path(path); @@ -881,28 +883,40 @@ static void __init of_unittest_dma_ranges_one(const char *path, return; } - rc = of_dma_get_range(np, &dma_addr, &paddr, &size); + rc = of_dma_get_range(np, &map); unittest(!rc, "of_dma_get_range failed on node %pOF rc=%i\n", np, rc); + if (!rc) { - unittest(size == expect_size, - "of_dma_get_range wrong size on node %pOF size=%llx\n", np, size); + phys_addr_t paddr; + dma_addr_t dma_addr; + struct device dev_bogus; + + dev_bogus.dma_range_map = map; + paddr = dma_to_phys(&dev_bogus, expect_dma_addr); + dma_addr = phys_to_dma(&dev_bogus, expect_paddr); + unittest(paddr == expect_paddr, - "of_dma_get_range wrong phys addr (%llx) on node %pOF", paddr, np); + "of_dma_get_range: wrong phys addr %pap (expecting %llx) on node %pOF\n", + &paddr, expect_paddr, np); unittest(dma_addr == expect_dma_addr, - "of_dma_get_range wrong DMA addr (%llx) on node %pOF", dma_addr, np); + "of_dma_get_range: wrong DMA addr %pad (expecting %llx) on node %pOF\n", + &dma_addr, expect_dma_addr, np); + + kfree(map); } of_node_put(np); +#endif } static void __init of_unittest_parse_dma_ranges(void) { of_unittest_dma_ranges_one("/testcase-data/address-tests/device@70000000", - 0x0, 0x20000000, 0x40000000); + 0x0, 0x20000000); of_unittest_dma_ranges_one("/testcase-data/address-tests/bus@80000000/device@1000", - 0x100000000, 0x20000000, 0x2000000000); + 0x100000000, 0x20000000); of_unittest_dma_ranges_one("/testcase-data/address-tests/pci@90000000", - 0x80000000, 0x20000000, 0x10000000); + 0x80000000, 0x20000000); } static void __init of_unittest_pci_dma_ranges(void) diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c index 7f90eeea67e279..8157dd491d2819 100644 --- a/drivers/remoteproc/remoteproc_core.c +++ b/drivers/remoteproc/remoteproc_core.c @@ -23,6 +23,7 @@ #include <linux/slab.h> #include <linux/mutex.h> #include <linux/dma-mapping.h> +#include <linux/dma-direct.h> /* XXX: pokes into bus_dma_range */ #include <linux/firmware.h> #include <linux/string.h> #include <linux/debugfs.h> @@ -458,6 +459,25 @@ static void rproc_rvdev_release(struct device *dev) kfree(rvdev); } +static int copy_dma_range_map(struct device *to, struct device *from) +{ + const struct bus_dma_region *map = from->dma_range_map, *new_map, *r; + int num_ranges = 0; + + if (!map) + return 0; + + for (r = map; r->size; r++) + num_ranges++; + + new_map = kmemdup(map, array_size(num_ranges + 1, sizeof(*map)), + GFP_KERNEL); + if (!new_map) + return -ENOMEM; + to->dma_range_map = new_map; + return 0; +} + /** * rproc_handle_vdev() - handle a vdev fw resource * @rproc: the remote processor @@ -529,7 +549,9 @@ static int rproc_handle_vdev(struct rproc *rproc, struct fw_rsc_vdev *rsc, /* Initialise vdev subdevice */ snprintf(name, sizeof(name), "vdev%dbuffer", rvdev->index); rvdev->dev.parent = &rproc->dev; - rvdev->dev.dma_pfn_offset = rproc->dev.parent->dma_pfn_offset; + ret = copy_dma_range_map(&rvdev->dev, rproc->dev.parent); + if (ret) + return ret; rvdev->dev.release = rproc_rvdev_release; dev_set_name(&rvdev->dev, "%s#%s", dev_name(rvdev->dev.parent), name); dev_set_drvdata(&rvdev->dev, rvdev); diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_hw.c b/drivers/staging/media/sunxi/cedrus/cedrus_hw.c index 1744e6fcc99980..bcf050a04ffc45 100644 --- a/drivers/staging/media/sunxi/cedrus/cedrus_hw.c +++ b/drivers/staging/media/sunxi/cedrus/cedrus_hw.c @@ -227,11 +227,17 @@ int cedrus_hw_probe(struct cedrus_dev *dev) * the RAM offset to the physcal addresses. * * This information will eventually be obtained from device-tree. + * + * XXX(hch): this has no business in a driver and needs to move + * to the device tree. */ #ifdef PHYS_PFN_OFFSET - if (!(variant->quirks & CEDRUS_QUIRK_NO_DMA_OFFSET)) - dev->dev->dma_pfn_offset = PHYS_PFN_OFFSET; + if (!(variant->quirks & CEDRUS_QUIRK_NO_DMA_OFFSET)) { + ret = dma_direct_set_offset(dev->dev, PHYS_OFFSET, 0, SZ_4G); + if (ret) + return ret; + } #endif ret = of_reserved_mem_device_init(dev->dev); diff --git a/include/linux/device.h b/include/linux/device.h index ca18da4768e3e8..1c78621fc3c01f 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -466,7 +466,7 @@ struct dev_links_info { * such descriptors. * @bus_dma_limit: Limit of an upstream bridge or bus which imposes a smaller * DMA limit than the device itself supports. - * @dma_pfn_offset: offset of DMA memory range relatively of RAM + * @dma_range_map: map for DMA memory ranges relative to that of RAM * @dma_parms: A low level driver may set these to teach IOMMU code about * segment limitations. * @dma_pools: Dma pools (if dma'ble device). @@ -561,7 +561,7 @@ struct device { 64 bit addresses for consistent allocations such descriptors. */ u64 bus_dma_limit; /* upstream dma constraint */ - unsigned long dma_pfn_offset; + const struct bus_dma_region *dma_range_map; struct device_dma_parameters *dma_parms; diff --git a/include/linux/dma-direct.h b/include/linux/dma-direct.h index 805010ea5346f9..c6b21acba7a459 100644 --- a/include/linux/dma-direct.h +++ b/include/linux/dma-direct.h @@ -14,6 +14,41 @@ extern unsigned int zone_dma_bits; +/* + * Record the mapping of CPU physical to DMA addresses for a given region. + */ +struct bus_dma_region { + phys_addr_t cpu_start; + dma_addr_t dma_start; + u64 size; + u64 offset; +}; + +static inline dma_addr_t translate_phys_to_dma(struct device *dev, + phys_addr_t paddr) +{ + const struct bus_dma_region *m; + + for (m = dev->dma_range_map; m->size; m++) + if (paddr >= m->cpu_start && paddr - m->cpu_start < m->size) + return (dma_addr_t)paddr - m->offset; + + /* make sure dma_capable fails when no translation is available */ + return DMA_MAPPING_ERROR; +} + +static inline phys_addr_t translate_dma_to_phys(struct device *dev, + dma_addr_t dma_addr) +{ + const struct bus_dma_region *m; + + for (m = dev->dma_range_map; m->size; m++) + if (dma_addr >= m->dma_start && dma_addr - m->dma_start < m->size) + return (phys_addr_t)dma_addr + m->offset; + + return (phys_addr_t)-1; +} + #ifdef CONFIG_ARCH_HAS_PHYS_TO_DMA #include <asm/dma-direct.h> #ifndef phys_to_dma_unencrypted @@ -23,9 +58,9 @@ extern unsigned int zone_dma_bits; static inline dma_addr_t phys_to_dma_unencrypted(struct device *dev, phys_addr_t paddr) { - dma_addr_t dev_addr = (dma_addr_t)paddr; - - return dev_addr - ((dma_addr_t)dev->dma_pfn_offset << PAGE_SHIFT); + if (dev->dma_range_map) + return translate_phys_to_dma(dev, paddr); + return paddr; } /* @@ -39,10 +74,14 @@ static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr) return __sme_set(phys_to_dma_unencrypted(dev, paddr)); } -static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t dev_addr) +static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t dma_addr) { - phys_addr_t paddr = (phys_addr_t)dev_addr + - ((phys_addr_t)dev->dma_pfn_offset << PAGE_SHIFT); + phys_addr_t paddr; + + if (dev->dma_range_map) + paddr = translate_dma_to_phys(dev, dma_addr); + else + paddr = dma_addr; return __sme_clr(paddr); } @@ -64,7 +103,8 @@ static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size, if (!dev->dma_mask) return false; - + if (addr == DMA_MAPPING_ERROR) + return false; if (is_ram && !IS_ENABLED(CONFIG_ARCH_DMA_ADDR_T_64BIT) && min(addr, end) < phys_to_dma(dev, PFN_PHYS(min_low_pfn))) return false; diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h index df0bff2ea750e0..bb138ac6f5e63e 100644 --- a/include/linux/dma-mapping.h +++ b/include/linux/dma-mapping.h @@ -730,4 +730,11 @@ static inline int dma_mmap_wc(struct device *dev, #define dma_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) #endif -#endif +/* + * Legacy interface to set up the dma offset map. Drivers really should not + * actually use it, but we have a few legacy cases left. + */ +int dma_direct_set_offset(struct device *dev, phys_addr_t cpu_start, + dma_addr_t dma_start, u64 size); + +#endif /* _LINUX_DMA_MAPPING_H */ diff --git a/kernel/dma/coherent.c b/kernel/dma/coherent.c index f85d14bbfcbe03..c0685196fb6d42 100644 --- a/kernel/dma/coherent.c +++ b/kernel/dma/coherent.c @@ -7,7 +7,7 @@ #include <linux/slab.h> #include <linux/kernel.h> #include <linux/module.h> -#include <linux/dma-mapping.h> +#include <linux/dma-direct.h> struct dma_coherent_mem { void *virt_base; @@ -32,9 +32,8 @@ static inline dma_addr_t dma_get_device_base(struct device *dev, struct dma_coherent_mem * mem) { if (mem->use_dev_dma_pfn_offset) - return (mem->pfn_base - dev->dma_pfn_offset) << PAGE_SHIFT; - else - return mem->device_base; + return phys_to_dma(dev, PFN_PHYS(mem->pfn_base)); + return mem->device_base; } static int dma_init_coherent_memory(phys_addr_t phys_addr, diff --git a/kernel/dma/direct.c b/kernel/dma/direct.c index 54db9cfdaecc6d..750659f7447c4b 100644 --- a/kernel/dma/direct.c +++ b/kernel/dma/direct.c @@ -13,6 +13,7 @@ #include <linux/pfn.h> #include <linux/vmalloc.h> #include <linux/set_memory.h> +#include <linux/slab.h> /* * Most architectures use ZONE_DMA for the first 16 Megabytes, but some use it @@ -66,8 +67,12 @@ static gfp_t dma_direct_optimal_gfp_mask(struct device *dev, u64 dma_mask, static bool dma_coherent_ok(struct device *dev, phys_addr_t phys, size_t size) { - return phys_to_dma_direct(dev, phys) + size - 1 <= - min_not_zero(dev->coherent_dma_mask, dev->bus_dma_limit); + dma_addr_t dma_addr = phys_to_dma_direct(dev, phys); + + if (dma_addr == DMA_MAPPING_ERROR) + return false; + return dma_addr + size - 1 <= + min_not_zero(dev->coherent_dma_mask, dev->bus_dma_limit); } /* @@ -461,3 +466,45 @@ bool dma_direct_need_sync(struct device *dev, dma_addr_t dma_addr) return !dev_is_dma_coherent(dev) || is_swiotlb_buffer(dma_to_phys(dev, dma_addr)); } + +/** + * dma_direct_set_offset - Assign scalar offset for a single DMA range. + * @dev: device pointer; needed to "own" the alloced memory. + * @cpu_start: beginning of memory region covered by this offset. + * @dma_start: beginning of DMA/PCI region covered by this offset. + * @size: size of the region. + * + * This is for the simple case of a uniform offset which cannot + * be discovered by "dma-ranges". + * + * It returns -ENOMEM if out of memory, -EINVAL if a map + * already exists, 0 otherwise. + * + * Note: any call to this from a driver is a bug. The mapping needs + * to be described by the device tree or other firmware interfaces. + */ +int dma_direct_set_offset(struct device *dev, phys_addr_t cpu_start, + dma_addr_t dma_start, u64 size) +{ + struct bus_dma_region *map; + u64 offset = (u64)cpu_start - (u64)dma_start; + + if (dev->dma_range_map) { + dev_err(dev, "attempt to add DMA range to existing map\n"); + return -EINVAL; + } + + if (!offset) + return 0; + + map = kcalloc(2, sizeof(*map), GFP_KERNEL); + if (!map) + return -ENOMEM; + map[0].cpu_start = cpu_start; + map[0].dma_start = dma_start; + map[0].offset = offset; + map[0].size = size; + dev->dma_range_map = map; + return 0; +} +EXPORT_SYMBOL_GPL(dma_direct_set_offset);