| Message ID | 20210113154935.3972869-3-dmitry.baryshkov@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Lorenzo Pieralisi |
| Headers | show |
| Series | PCI: qcom: fix PCIe support on sm8250 | expand |
On Wed, Jan 13, 2021 at 06:49:35PM +0300, Dmitry Baryshkov wrote: > On SM8250 additional clock is required for PCIe devices to access NOC. > Update PCIe controller driver to control this clock. > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > Fixes: e1dd639e374a ("PCI: qcom: Add SM8250 SoC support") Just couple of comments below, with that addressed: Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Thanks, Mani > --- > drivers/pci/controller/dwc/pcie-qcom.c | 19 ++++++++++++++----- > 1 file changed, 14 insertions(+), 5 deletions(-) > > diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c > index affa2713bf80..e2140aba220a 100644 > --- a/drivers/pci/controller/dwc/pcie-qcom.c > +++ b/drivers/pci/controller/dwc/pcie-qcom.c > @@ -159,8 +159,10 @@ struct qcom_pcie_resources_2_3_3 { > struct reset_control *rst[7]; > }; > > +#define QCOM_PCIE_2_7_0_MAX_CLOCKS 7 > struct qcom_pcie_resources_2_7_0 { > - struct clk_bulk_data clks[6]; > + struct clk_bulk_data clks[QCOM_PCIE_2_7_0_MAX_CLOCKS]; Just use 7 directly and mention in comment that SM8250 needs an extra clock. > + int num_clks; > struct regulator_bulk_data supplies[2]; > struct reset_control *pci_reset; > struct clk *pipe_clk; > @@ -1133,6 +1135,7 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie) > struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0; > struct dw_pcie *pci = pcie->pci; > struct device *dev = pci->dev; > + bool has_sf_tbu = of_device_is_compatible(dev->of_node, "qcom,pcie-sm8250"); > int ret; > > res->pci_reset = devm_reset_control_get_exclusive(dev, "pci"); > @@ -1152,8 +1155,14 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie) > res->clks[3].id = "bus_slave"; > res->clks[4].id = "slave_q2a"; > res->clks[5].id = "tbu"; > + if (has_sf_tbu) { Here also you can use the of_device_is_compatible() call directly and avoid a local variable. Thanks, Mani > + res->clks[6].id = "ddrss_sf_tbu"; > + res->num_clks = 7; > + } else { > + res->num_clks = 6; > + } > > - ret = devm_clk_bulk_get(dev, ARRAY_SIZE(res->clks), res->clks); > + ret = devm_clk_bulk_get(dev, res->num_clks, res->clks); > if (ret < 0) > return ret; > > @@ -1175,7 +1184,7 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie) > return ret; > } > > - ret = clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks); > + ret = clk_bulk_prepare_enable(res->num_clks, res->clks); > if (ret < 0) > goto err_disable_regulators; > > @@ -1227,7 +1236,7 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie) > > return 0; > err_disable_clocks: > - clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks); > + clk_bulk_disable_unprepare(res->num_clks, res->clks); > err_disable_regulators: > regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies); > > @@ -1238,7 +1247,7 @@ static void qcom_pcie_deinit_2_7_0(struct qcom_pcie *pcie) > { > struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0; > > - clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks); > + clk_bulk_disable_unprepare(res->num_clks, res->clks); > regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies); > } > > -- > 2.29.2 >
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index affa2713bf80..e2140aba220a 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -159,8 +159,10 @@ struct qcom_pcie_resources_2_3_3 { struct reset_control *rst[7]; }; +#define QCOM_PCIE_2_7_0_MAX_CLOCKS 7 struct qcom_pcie_resources_2_7_0 { - struct clk_bulk_data clks[6]; + struct clk_bulk_data clks[QCOM_PCIE_2_7_0_MAX_CLOCKS]; + int num_clks; struct regulator_bulk_data supplies[2]; struct reset_control *pci_reset; struct clk *pipe_clk; @@ -1133,6 +1135,7 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie) struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0; struct dw_pcie *pci = pcie->pci; struct device *dev = pci->dev; + bool has_sf_tbu = of_device_is_compatible(dev->of_node, "qcom,pcie-sm8250"); int ret; res->pci_reset = devm_reset_control_get_exclusive(dev, "pci"); @@ -1152,8 +1155,14 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie) res->clks[3].id = "bus_slave"; res->clks[4].id = "slave_q2a"; res->clks[5].id = "tbu"; + if (has_sf_tbu) { + res->clks[6].id = "ddrss_sf_tbu"; + res->num_clks = 7; + } else { + res->num_clks = 6; + } - ret = devm_clk_bulk_get(dev, ARRAY_SIZE(res->clks), res->clks); + ret = devm_clk_bulk_get(dev, res->num_clks, res->clks); if (ret < 0) return ret; @@ -1175,7 +1184,7 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie) return ret; } - ret = clk_bulk_prepare_enable(ARRAY_SIZE(res->clks), res->clks); + ret = clk_bulk_prepare_enable(res->num_clks, res->clks); if (ret < 0) goto err_disable_regulators; @@ -1227,7 +1236,7 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie) return 0; err_disable_clocks: - clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks); + clk_bulk_disable_unprepare(res->num_clks, res->clks); err_disable_regulators: regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies); @@ -1238,7 +1247,7 @@ static void qcom_pcie_deinit_2_7_0(struct qcom_pcie *pcie) { struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0; - clk_bulk_disable_unprepare(ARRAY_SIZE(res->clks), res->clks); + clk_bulk_disable_unprepare(res->num_clks, res->clks); regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies); }
On SM8250 additional clock is required for PCIe devices to access NOC. Update PCIe controller driver to control this clock. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: e1dd639e374a ("PCI: qcom: Add SM8250 SoC support") --- drivers/pci/controller/dwc/pcie-qcom.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-)