deleted file mode 100644
@@ -1,15 +0,0 @@
-What: /sys/firmware/sfi/tables/
-Date: May 2010
-Contact: Len Brown <lenb@kernel.org>
-Description:
- SFI defines a number of small static memory tables
- so the kernel can get platform information from firmware.
-
- The tables are defined in the latest SFI specification:
- http://simplefirmware.org/documentation
-
- While the tables are used by the kernel, user-space
- can observe them this way::
-
- # cd /sys/firmware/sfi/tables
- # cat $TABLENAME > $TABLENAME.bin
@@ -7,7 +7,7 @@ Description:
is connected. example: "/dev/ttyS0".
The device name flows down to architecture specific board
- initialization file from the SFI/ATAGS bootloader
+ initialization file from the ATAGS bootloader
firmware. The name exposed is read from the user-space
dameon and opens the device when install is requested.
@@ -16233,13 +16233,6 @@ S: Maintained
F: Documentation/fb/sm712fb.rst
F: drivers/video/fbdev/sm712*
-SIMPLE FIRMWARE INTERFACE (SFI)
-S: Obsolete
-W: http://simplefirmware.org/
-F: arch/x86/platform/sfi/
-F: drivers/sfi/
-F: include/linux/sfi*.h
-
SIMPLEFB FB DRIVER
M: Hans de Goede <hdegoede@redhat.com>
L: linux-fbdev@vger.kernel.org
@@ -443,7 +443,7 @@ config X86_X2APIC
If you don't know what to do here, say N.
config X86_MPPARSE
- bool "Enable MPS table" if ACPI || SFI
+ bool "Enable MPS table" if ACPI
default y
depends on X86_LOCAL_APIC
help
@@ -602,7 +602,6 @@ config X86_INTEL_MID
depends on PCI
depends on X86_64 || (PCI_GOANY && X86_32)
depends on X86_IO_APIC
- select SFI
select I2C
select DW_APB_TIMER
select APB_TIMER
@@ -2456,8 +2455,6 @@ source "kernel/power/Kconfig"
source "drivers/acpi/Kconfig"
-source "drivers/sfi/Kconfig"
-
config X86_APM_BOOT
def_bool y
depends on APM
@@ -2644,7 +2641,7 @@ config PCI_DIRECT
config PCI_MMCONFIG
bool "Support mmconfig PCI config space access" if X86_64
default y
- depends on PCI && (ACPI || SFI || JAILHOUSE_GUEST)
+ depends on PCI && (ACPI || JAILHOUSE_GUEST)
depends on X86_64 || (PCI_GOANY || PCI_GOMMCONFIG)
config PCI_OLPC
@@ -7,7 +7,6 @@
#ifndef _ASM_X86_INTEL_MID_H
#define _ASM_X86_INTEL_MID_H
-#include <linux/sfi.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
@@ -22,39 +21,6 @@ extern void intel_mid_pwr_power_off(void);
extern int intel_mid_pwr_get_lss_id(struct pci_dev *pdev);
-extern int get_gpio_by_name(const char *name);
-
-/*
- * Here defines the array of devices platform data that IAFW would export
- * through SFI "DEVS" table, we use name and type to match the device and
- * its platform data.
- */
-struct devs_id {
- char name[SFI_NAME_LEN + 1];
- u8 type;
- u8 delay;
- void *(*get_platform_data)(void *info);
-};
-
-#define sfi_device(i) \
- static const struct devs_id *const __intel_mid_sfi_##i##_dev __used \
- __section(".x86_intel_mid_dev.init") = &i
-
-/**
-* struct mid_sd_board_info - template for SD device creation
-* @name: identifies the driver
-* @bus_num: board-specific identifier for a given SD controller
-* @max_clk: the maximum frequency device supports
-* @platform_data: the particular data stored there is driver-specific
-*/
-struct mid_sd_board_info {
- char name[SFI_NAME_LEN];
- int bus_num;
- unsigned short addr;
- u32 max_clk;
- void *platform_data;
-};
-
/*
* Medfield is the follow-up of Moorestown, it combines two chip solution into
* one. Other than that it also added always-on and constant tsc and lapic
@@ -99,7 +65,4 @@ static inline void intel_scu_devices_destroy(void) { }
/* FSB 83MHz */
#define BSEL_SOC_FUSE_111 0x7
-/* The offset for the mapping of global gpio pin to irq */
-#define INTEL_MID_IRQ_OFFSET 0x100
-
#endif /* _ASM_X86_INTEL_MID_H */
@@ -2,73 +2,17 @@
#ifndef _ASM_X86_INTEL_SCU_IPC_LEGACY_H_
#define _ASM_X86_INTEL_SCU_IPC_LEGACY_H_
-#include <linux/notifier.h>
-
-#define IPCMSG_INDIRECT_READ 0x02
-#define IPCMSG_INDIRECT_WRITE 0x05
+#include <linux/types.h>
#define IPCMSG_COLD_OFF 0x80 /* Only for Tangier */
-
-#define IPCMSG_WARM_RESET 0xF0
#define IPCMSG_COLD_RESET 0xF1
-#define IPCMSG_SOFT_RESET 0xF2
-#define IPCMSG_COLD_BOOT 0xF3
/* Don't call these in new code - they will be removed eventually */
-/* Read a vector */
-static inline int intel_scu_ipc_readv(u16 *addr, u8 *data, int len)
-{
- return intel_scu_ipc_dev_readv(NULL, addr, data, len);
-}
-
-/* Write a vector */
-static inline int intel_scu_ipc_writev(u16 *addr, u8 *data, int len)
-{
- return intel_scu_ipc_dev_writev(NULL, addr, data, len);
-}
-
-/* Update single register based on the mask */
-static inline int intel_scu_ipc_update_register(u16 addr, u8 data, u8 mask)
-{
- return intel_scu_ipc_dev_update(NULL, addr, data, mask);
-}
-
/* Issue commands to the SCU with or without data */
static inline int intel_scu_ipc_simple_command(int cmd, int sub)
{
return intel_scu_ipc_dev_simple_command(NULL, cmd, sub);
}
-static inline int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen,
- u32 *out, int outlen)
-{
- /* New API takes both inlen and outlen as bytes so convert here */
- size_t inbytes = inlen * sizeof(u32);
- size_t outbytes = outlen * sizeof(u32);
-
- return intel_scu_ipc_dev_command_with_size(NULL, cmd, sub, in, inbytes,
- inlen, out, outbytes);
-}
-
-extern struct blocking_notifier_head intel_scu_notifier;
-
-static inline void intel_scu_notifier_add(struct notifier_block *nb)
-{
- blocking_notifier_chain_register(&intel_scu_notifier, nb);
-}
-
-static inline void intel_scu_notifier_remove(struct notifier_block *nb)
-{
- blocking_notifier_chain_unregister(&intel_scu_notifier, nb);
-}
-
-static inline int intel_scu_notifier_post(unsigned long v, void *p)
-{
- return blocking_notifier_call_chain(&intel_scu_notifier, v, p);
-}
-
-#define SCU_AVAILABLE 1
-#define SCU_DOWN 2
-
#endif
@@ -10,8 +10,6 @@
#ifndef _PLATFORM_SST_AUDIO_H_
#define _PLATFORM_SST_AUDIO_H_
-#include <linux/sfi.h>
-
#define MAX_NUM_STREAMS_MRFLD 25
#define MAX_NUM_STREAMS MAX_NUM_STREAMS_MRFLD
@@ -198,7 +198,7 @@ static int __init parse_noapic(char *str)
}
early_param("noapic", parse_noapic);
-/* Will be called in mpparse/acpi/sfi codes for saving IRQ info */
+/* Will be called in mpparse/ACPI codes for saving IRQ info */
void mp_save_irq(struct mpc_intsrc *m)
{
int i;
@@ -2863,7 +2863,7 @@ int mp_register_ioapic(int id, u32 address, u32 gsi_base,
/*
* If mp_register_ioapic() is called during early boot stage when
- * walking ACPI/SFI/DT tables, it's too early to create irqdomain,
+ * walking ACPI/DT tables, it's too early to create irqdomain,
* we are still using bootmem allocator. So delay it to setup_IO_APIC().
*/
if (hotplug) {
@@ -16,7 +16,6 @@
#include <linux/memblock.h>
#include <linux/pci.h>
#include <linux/root_dev.h>
-#include <linux/sfi.h>
#include <linux/hugetlb.h>
#include <linux/tboot.h>
#include <linux/usb/xhci-dbgp.h>
@@ -1185,7 +1184,6 @@ void __init setup_arch(char **cmdline_p)
* Read APIC and some other early information from ACPI tables.
*/
acpi_boot_init();
- sfi_init();
x86_dtb_init();
/*
@@ -11,9 +11,9 @@
* themselves.
*/
+#include <linux/acpi.h>
#include <linux/pci.h>
#include <linux/init.h>
-#include <linux/sfi_acpi.h>
#include <linux/bitmap.h>
#include <linux/dmi.h>
#include <linux/slab.h>
@@ -665,7 +665,7 @@ void __init pci_mmcfg_early_init(void)
if (pci_mmcfg_check_hostbridge())
known_bridge = 1;
else
- acpi_sfi_table_parse(ACPI_SIG_MCFG, pci_parse_mcfg);
+ acpi_table_parse(ACPI_SIG_MCFG, pci_parse_mcfg);
__pci_mmcfg_init(1);
set_apei_filter();
@@ -683,7 +683,7 @@ void __init pci_mmcfg_late_init(void)
/* MMCONFIG hasn't been enabled yet, try again */
if (pci_probe & PCI_PROBE_MASK & ~PCI_PROBE_MMCONF) {
- acpi_sfi_table_parse(ACPI_SIG_MCFG, pci_parse_mcfg);
+ acpi_table_parse(ACPI_SIG_MCFG, pci_parse_mcfg);
__pci_mmcfg_init(0);
}
}
@@ -10,6 +10,5 @@ obj-y += intel-mid/
obj-y += intel-quark/
obj-y += olpc/
obj-y += scx200/
-obj-y += sfi/
obj-y += ts5500/
obj-y += uv/
@@ -1,7 +1,2 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-$(CONFIG_X86_INTEL_MID) += intel-mid.o pwr.o
-
-# SFI specific code
-ifdef CONFIG_X86_INTEL_MID
-obj-$(CONFIG_SFI) += sfi.o device_libs/
-endif
deleted file mode 100644
@@ -1,23 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-# Family-Level Interface Shim (FLIS)
-obj-$(subst m,y,$(CONFIG_PINCTRL_MERRIFIELD)) += platform_mrfld_pinctrl.o
-# SDHCI Devices
-obj-$(subst m,y,$(CONFIG_MMC_SDHCI_PCI)) += platform_mrfld_sd.o
-# WiFi + BT
-obj-$(subst m,y,$(CONFIG_BRCMFMAC_SDIO)) += platform_bcm43xx.o
-obj-$(subst m,y,$(CONFIG_BT_HCIUART_BCM)) += platform_bt.o
-# SPI Devices
-obj-$(subst m,y,$(CONFIG_SPI_SPIDEV)) += platform_mrfld_spidev.o
-# I2C Devices
-obj-$(subst m,y,$(CONFIG_SENSORS_EMC1403)) += platform_emc1403.o
-obj-$(subst m,y,$(CONFIG_SENSORS_LIS3LV02D)) += platform_lis331.o
-obj-$(subst m,y,$(CONFIG_MPU3050_I2C)) += platform_mpu3050.o
-obj-$(subst m,y,$(CONFIG_INPUT_BMA150)) += platform_bma023.o
-obj-$(subst m,y,$(CONFIG_DRM_MEDFIELD)) += platform_tc35876x.o
-# I2C GPIO Expanders
-obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_max7315.o
-obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_pcal9555a.o
-obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_tca6416.o
-# MISC Devices
-obj-$(subst m,y,$(CONFIG_KEYBOARD_GPIO)) += platform_gpio_keys.o
-obj-$(subst m,y,$(CONFIG_RTC_DRV_CMOS)) += platform_mrfld_rtc.o
deleted file mode 100644
@@ -1,101 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform_bcm43xx.c: bcm43xx platform data initialization file
- *
- * (C) Copyright 2016 Intel Corporation
- * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- */
-
-#include <linux/gpio/machine.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/sfi.h>
-
-#include <asm/intel-mid.h>
-
-#define WLAN_SFI_GPIO_IRQ_NAME "WLAN-interrupt"
-#define WLAN_SFI_GPIO_ENABLE_NAME "WLAN-enable"
-
-#define WLAN_DEV_NAME "0000:00:01.3"
-
-static struct regulator_consumer_supply bcm43xx_vmmc_supply = {
- .dev_name = WLAN_DEV_NAME,
- .supply = "vmmc",
-};
-
-static struct regulator_init_data bcm43xx_vmmc_data = {
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &bcm43xx_vmmc_supply,
-};
-
-static struct fixed_voltage_config bcm43xx_vmmc = {
- .supply_name = "bcm43xx-vmmc-regulator",
- /*
- * Announce 2.0V here to be compatible with SDIO specification. The
- * real voltage and signaling are still 1.8V.
- */
- .microvolts = 2000000, /* 1.8V */
- .startup_delay = 250 * 1000, /* 250ms */
- .enabled_at_boot = 0, /* disabled at boot */
- .init_data = &bcm43xx_vmmc_data,
-};
-
-static struct platform_device bcm43xx_vmmc_regulator = {
- .name = "reg-fixed-voltage",
- .id = PLATFORM_DEVID_AUTO,
- .dev = {
- .platform_data = &bcm43xx_vmmc,
- },
-};
-
-static struct gpiod_lookup_table bcm43xx_vmmc_gpio_table = {
- .dev_id = "reg-fixed-voltage.0",
- .table = {
- GPIO_LOOKUP("0000:00:0c.0", -1, NULL, GPIO_ACTIVE_LOW),
- {}
- },
-};
-
-static int __init bcm43xx_regulator_register(void)
-{
- struct gpiod_lookup_table *table = &bcm43xx_vmmc_gpio_table;
- struct gpiod_lookup *lookup = table->table;
- int ret;
-
- lookup[0].chip_hwnum = get_gpio_by_name(WLAN_SFI_GPIO_ENABLE_NAME);
- gpiod_add_lookup_table(table);
-
- ret = platform_device_register(&bcm43xx_vmmc_regulator);
- if (ret) {
- pr_err("%s: vmmc regulator register failed\n", __func__);
- return ret;
- }
-
- return 0;
-}
-
-static void __init *bcm43xx_platform_data(void *info)
-{
- int ret;
-
- ret = bcm43xx_regulator_register();
- if (ret)
- return NULL;
-
- pr_info("Using generic wifi platform data\n");
-
- /* For now it's empty */
- return NULL;
-}
-
-static const struct devs_id bcm43xx_clk_vmmc_dev_id __initconst = {
- .name = "bcm43xx_clk_vmmc",
- .type = SFI_DEV_TYPE_SD,
- .get_platform_data = &bcm43xx_platform_data,
-};
-
-sfi_device(bcm43xx_clk_vmmc_dev_id);
deleted file mode 100644
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform_bma023.c: bma023 platform data initialization file
- *
- * (C) Copyright 2013 Intel Corporation
- */
-
-#include <asm/intel-mid.h>
-
-static const struct devs_id bma023_dev_id __initconst = {
- .name = "bma023",
- .type = SFI_DEV_TYPE_I2C,
- .delay = 1,
-};
-
-sfi_device(bma023_dev_id);
deleted file mode 100644
@@ -1,101 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Bluetooth platform data initialization file
- *
- * (C) Copyright 2017 Intel Corporation
- * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- */
-
-#include <linux/gpio/machine.h>
-#include <linux/pci.h>
-#include <linux/platform_device.h>
-
-#include <asm/cpu_device_id.h>
-#include <asm/intel-family.h>
-#include <asm/intel-mid.h>
-
-struct bt_sfi_data {
- struct device *dev;
- const char *name;
- int (*setup)(struct bt_sfi_data *ddata);
-};
-
-static struct gpiod_lookup_table tng_bt_sfi_gpio_table = {
- .dev_id = "hci_bcm",
- .table = {
- GPIO_LOOKUP("0000:00:0c.0", -1, "device-wakeup", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("0000:00:0c.0", -1, "shutdown", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("0000:00:0c.0", -1, "host-wakeup", GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-#define TNG_BT_SFI_GPIO_DEVICE_WAKEUP "bt_wakeup"
-#define TNG_BT_SFI_GPIO_SHUTDOWN "BT-reset"
-#define TNG_BT_SFI_GPIO_HOST_WAKEUP "bt_uart_enable"
-
-static int __init tng_bt_sfi_setup(struct bt_sfi_data *ddata)
-{
- struct gpiod_lookup_table *table = &tng_bt_sfi_gpio_table;
- struct gpiod_lookup *lookup = table->table;
- struct pci_dev *pdev;
-
- /* Connected to /dev/ttyS0 */
- pdev = pci_get_domain_bus_and_slot(0, 0, PCI_DEVFN(4, 1));
- if (!pdev)
- return -ENODEV;
-
- ddata->dev = &pdev->dev;
- ddata->name = table->dev_id;
-
- lookup[0].chip_hwnum = get_gpio_by_name(TNG_BT_SFI_GPIO_DEVICE_WAKEUP);
- lookup[1].chip_hwnum = get_gpio_by_name(TNG_BT_SFI_GPIO_SHUTDOWN);
- lookup[2].chip_hwnum = get_gpio_by_name(TNG_BT_SFI_GPIO_HOST_WAKEUP);
-
- gpiod_add_lookup_table(table);
- return 0;
-}
-
-static struct bt_sfi_data tng_bt_sfi_data __initdata = {
- .setup = tng_bt_sfi_setup,
-};
-
-static const struct x86_cpu_id bt_sfi_cpu_ids[] = {
- X86_MATCH_INTEL_FAM6_MODEL(ATOM_SILVERMONT_MID, &tng_bt_sfi_data),
- {}
-};
-
-static int __init bt_sfi_init(void)
-{
- struct platform_device_info info;
- struct platform_device *pdev;
- const struct x86_cpu_id *id;
- struct bt_sfi_data *ddata;
- int ret;
-
- id = x86_match_cpu(bt_sfi_cpu_ids);
- if (!id)
- return -ENODEV;
-
- ddata = (struct bt_sfi_data *)id->driver_data;
- if (!ddata)
- return -ENODEV;
-
- ret = ddata->setup(ddata);
- if (ret)
- return ret;
-
- memset(&info, 0, sizeof(info));
- info.fwnode = ddata->dev->fwnode;
- info.parent = ddata->dev;
- info.name = ddata->name;
- info.id = PLATFORM_DEVID_NONE;
-
- pdev = platform_device_register_full(&info);
- if (IS_ERR(pdev))
- return PTR_ERR(pdev);
-
- dev_info(ddata->dev, "Registered Bluetooth device: %s\n", ddata->name);
- return 0;
-}
-device_initcall(bt_sfi_init);
deleted file mode 100644
@@ -1,39 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform_emc1403.c: emc1403 platform data initialization file
- *
- * (C) Copyright 2013 Intel Corporation
- * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
- */
-
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <asm/intel-mid.h>
-
-static void __init *emc1403_platform_data(void *info)
-{
- static short intr2nd_pdata;
- struct i2c_board_info *i2c_info = info;
- int intr = get_gpio_by_name("thermal_int");
- int intr2nd = get_gpio_by_name("thermal_alert");
-
- if (intr < 0)
- return NULL;
- if (intr2nd < 0)
- return NULL;
-
- i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
- intr2nd_pdata = intr2nd + INTEL_MID_IRQ_OFFSET;
-
- return &intr2nd_pdata;
-}
-
-static const struct devs_id emc1403_dev_id __initconst = {
- .name = "emc1403",
- .type = SFI_DEV_TYPE_I2C,
- .delay = 1,
- .get_platform_data = &emc1403_platform_data,
-};
-
-sfi_device(emc1403_dev_id);
deleted file mode 100644
@@ -1,81 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform_gpio_keys.c: gpio_keys platform data initialization file
- *
- * (C) Copyright 2013 Intel Corporation
- * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
- */
-
-#include <linux/input.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/platform_device.h>
-#include <asm/intel-mid.h>
-
-#define DEVICE_NAME "gpio-keys"
-
-/*
- * we will search these buttons in SFI GPIO table (by name)
- * and register them dynamically. Please add all possible
- * buttons here, we will shrink them if no GPIO found.
- */
-static struct gpio_keys_button gpio_button[] = {
- {KEY_POWER, -1, 1, "power_btn", EV_KEY, 0, 3000},
- {KEY_PROG1, -1, 1, "prog_btn1", EV_KEY, 0, 20},
- {KEY_PROG2, -1, 1, "prog_btn2", EV_KEY, 0, 20},
- {SW_LID, -1, 1, "lid_switch", EV_SW, 0, 20},
- {KEY_VOLUMEUP, -1, 1, "vol_up", EV_KEY, 0, 20},
- {KEY_VOLUMEDOWN, -1, 1, "vol_down", EV_KEY, 0, 20},
- {KEY_MUTE, -1, 1, "mute_enable", EV_KEY, 0, 20},
- {KEY_VOLUMEUP, -1, 1, "volume_up", EV_KEY, 0, 20},
- {KEY_VOLUMEDOWN, -1, 1, "volume_down", EV_KEY, 0, 20},
- {KEY_CAMERA, -1, 1, "camera_full", EV_KEY, 0, 20},
- {KEY_CAMERA_FOCUS, -1, 1, "camera_half", EV_KEY, 0, 20},
- {SW_KEYPAD_SLIDE, -1, 1, "MagSw1", EV_SW, 0, 20},
- {SW_KEYPAD_SLIDE, -1, 1, "MagSw2", EV_SW, 0, 20},
-};
-
-static struct gpio_keys_platform_data gpio_keys = {
- .buttons = gpio_button,
- .rep = 1,
- .nbuttons = -1, /* will fill it after search */
-};
-
-static struct platform_device pb_device = {
- .name = DEVICE_NAME,
- .id = -1,
- .dev = {
- .platform_data = &gpio_keys,
- },
-};
-
-/*
- * Shrink the non-existent buttons, register the gpio button
- * device if there is some
- */
-static int __init pb_keys_init(void)
-{
- struct gpio_keys_button *gb = gpio_button;
- int i, good = 0;
-
- for (i = 0; i < ARRAY_SIZE(gpio_button); i++) {
- gb[i].gpio = get_gpio_by_name(gb[i].desc);
- pr_debug("info[%2d]: name = %s, gpio = %d\n", i, gb[i].desc,
- gb[i].gpio);
- if (gb[i].gpio < 0)
- continue;
-
- if (i != good)
- gb[good] = gb[i];
- good++;
- }
-
- if (good) {
- gpio_keys.nbuttons = good;
- return platform_device_register(&pb_device);
- }
- return 0;
-}
-late_initcall(pb_keys_init);
deleted file mode 100644
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform_lis331.c: lis331 platform data initialization file
- *
- * (C) Copyright 2013 Intel Corporation
- * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
- */
-
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <asm/intel-mid.h>
-
-static void __init *lis331dl_platform_data(void *info)
-{
- static short intr2nd_pdata;
- struct i2c_board_info *i2c_info = info;
- int intr = get_gpio_by_name("accel_int");
- int intr2nd = get_gpio_by_name("accel_2");
-
- if (intr < 0)
- return NULL;
- if (intr2nd < 0)
- return NULL;
-
- i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
- intr2nd_pdata = intr2nd + INTEL_MID_IRQ_OFFSET;
-
- return &intr2nd_pdata;
-}
-
-static const struct devs_id lis331dl_dev_id __initconst = {
- .name = "i2c_accel",
- .type = SFI_DEV_TYPE_I2C,
- .get_platform_data = &lis331dl_platform_data,
-};
-
-sfi_device(lis331dl_dev_id);
deleted file mode 100644
@@ -1,77 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform_max7315.c: max7315 platform data initialization file
- *
- * (C) Copyright 2013 Intel Corporation
- * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
- */
-
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/pca953x.h>
-#include <asm/intel-mid.h>
-
-#define MAX7315_NUM 2
-
-static void __init *max7315_platform_data(void *info)
-{
- static struct pca953x_platform_data max7315_pdata[MAX7315_NUM];
- static int nr;
- struct pca953x_platform_data *max7315 = &max7315_pdata[nr];
- struct i2c_board_info *i2c_info = info;
- int gpio_base, intr;
- char base_pin_name[SFI_NAME_LEN + 1];
- char intr_pin_name[SFI_NAME_LEN + 1];
-
- if (nr == MAX7315_NUM) {
- pr_err("too many max7315s, we only support %d\n",
- MAX7315_NUM);
- return NULL;
- }
- /* we have several max7315 on the board, we only need load several
- * instances of the same pca953x driver to cover them
- */
- strcpy(i2c_info->type, "max7315");
- if (nr++) {
- snprintf(base_pin_name, sizeof(base_pin_name),
- "max7315_%d_base", nr);
- snprintf(intr_pin_name, sizeof(intr_pin_name),
- "max7315_%d_int", nr);
- } else {
- strcpy(base_pin_name, "max7315_base");
- strcpy(intr_pin_name, "max7315_int");
- }
-
- gpio_base = get_gpio_by_name(base_pin_name);
- intr = get_gpio_by_name(intr_pin_name);
-
- if (gpio_base < 0)
- return NULL;
- max7315->gpio_base = gpio_base;
- if (intr != -1) {
- i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
- max7315->irq_base = gpio_base + INTEL_MID_IRQ_OFFSET;
- } else {
- i2c_info->irq = -1;
- max7315->irq_base = -1;
- }
- return max7315;
-}
-
-static const struct devs_id max7315_dev_id __initconst = {
- .name = "i2c_max7315",
- .type = SFI_DEV_TYPE_I2C,
- .delay = 1,
- .get_platform_data = &max7315_platform_data,
-};
-
-static const struct devs_id max7315_2_dev_id __initconst = {
- .name = "i2c_max7315_2",
- .type = SFI_DEV_TYPE_I2C,
- .delay = 1,
- .get_platform_data = &max7315_platform_data,
-};
-
-sfi_device(max7315_dev_id);
-sfi_device(max7315_2_dev_id);
deleted file mode 100644
@@ -1,32 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform_mpu3050.c: mpu3050 platform data initialization file
- *
- * (C) Copyright 2013 Intel Corporation
- * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
- */
-
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <asm/intel-mid.h>
-
-static void *mpu3050_platform_data(void *info)
-{
- struct i2c_board_info *i2c_info = info;
- int intr = get_gpio_by_name("mpu3050_int");
-
- if (intr < 0)
- return NULL;
-
- i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
- return NULL;
-}
-
-static const struct devs_id mpu3050_dev_id __initconst = {
- .name = "mpu3050",
- .type = SFI_DEV_TYPE_I2C,
- .delay = 1,
- .get_platform_data = &mpu3050_platform_data,
-};
-
-sfi_device(mpu3050_dev_id);
deleted file mode 100644
@@ -1,39 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Intel Merrifield FLIS platform device initialization file
- *
- * Copyright (C) 2016, Intel Corporation
- *
- * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- */
-
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-
-#include <asm/intel-mid.h>
-
-#define FLIS_BASE_ADDR 0xff0c0000
-#define FLIS_LENGTH 0x8000
-
-static struct resource mrfld_pinctrl_mmio_resource = {
- .start = FLIS_BASE_ADDR,
- .end = FLIS_BASE_ADDR + FLIS_LENGTH - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device mrfld_pinctrl_device = {
- .name = "pinctrl-merrifield",
- .id = PLATFORM_DEVID_NONE,
- .resource = &mrfld_pinctrl_mmio_resource,
- .num_resources = 1,
-};
-
-static int __init mrfld_pinctrl_init(void)
-{
- if (intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_TANGIER)
- return platform_device_register(&mrfld_pinctrl_device);
-
- return -ENODEV;
-}
-arch_initcall(mrfld_pinctrl_init);
deleted file mode 100644
@@ -1,44 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Intel Merrifield legacy RTC initialization file
- *
- * (C) Copyright 2017 Intel Corporation
- *
- * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- */
-
-#include <linux/init.h>
-
-#include <asm/hw_irq.h>
-#include <asm/intel-mid.h>
-#include <asm/io_apic.h>
-#include <asm/time.h>
-#include <asm/x86_init.h>
-
-static int __init mrfld_legacy_rtc_alloc_irq(void)
-{
- struct irq_alloc_info info;
- int ret;
-
- if (!x86_platform.legacy.rtc)
- return -ENODEV;
-
- ioapic_set_alloc_attr(&info, NUMA_NO_NODE, 1, 0);
- ret = mp_map_gsi_to_irq(RTC_IRQ, IOAPIC_MAP_ALLOC, &info);
- if (ret < 0) {
- pr_info("Failed to allocate RTC interrupt. Disabling RTC\n");
- x86_platform.legacy.rtc = 0;
- return ret;
- }
-
- return 0;
-}
-
-static int __init mrfld_legacy_rtc_init(void)
-{
- if (intel_mid_identify_cpu() != INTEL_MID_CPU_CHIP_TANGIER)
- return -ENODEV;
-
- return mrfld_legacy_rtc_alloc_irq();
-}
-arch_initcall(mrfld_legacy_rtc_init);
deleted file mode 100644
@@ -1,43 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * SDHCI platform data initilisation file
- *
- * (C) Copyright 2016 Intel Corporation
- * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- */
-
-#include <linux/init.h>
-#include <linux/pci.h>
-
-#include <linux/mmc/sdhci-pci-data.h>
-
-#include <asm/intel-mid.h>
-
-#define INTEL_MRFLD_SD 2
-#define INTEL_MRFLD_SD_CD_GPIO 77
-
-static struct sdhci_pci_data mrfld_sdhci_pci_data = {
- .rst_n_gpio = -EINVAL,
- .cd_gpio = INTEL_MRFLD_SD_CD_GPIO,
-};
-
-static struct sdhci_pci_data *
-mrfld_sdhci_pci_get_data(struct pci_dev *pdev, int slotno)
-{
- unsigned int func = PCI_FUNC(pdev->devfn);
-
- if (func == INTEL_MRFLD_SD)
- return &mrfld_sdhci_pci_data;
-
- return NULL;
-}
-
-static int __init mrfld_sd_init(void)
-{
- if (intel_mid_identify_cpu() != INTEL_MID_CPU_CHIP_TANGIER)
- return -ENODEV;
-
- sdhci_pci_get_data = mrfld_sdhci_pci_get_data;
- return 0;
-}
-arch_initcall(mrfld_sd_init);
deleted file mode 100644
@@ -1,50 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * spidev platform data initialization file
- *
- * (C) Copyright 2014, 2016 Intel Corporation
- * Authors: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- * Dan O'Donovan <dan@emutex.com>
- */
-
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/sfi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/spi/spi.h>
-
-#include <asm/intel-mid.h>
-
-#define MRFLD_SPI_DEFAULT_DMA_BURST 8
-#define MRFLD_SPI_DEFAULT_TIMEOUT 500
-
-/* GPIO pin for spidev chipselect */
-#define MRFLD_SPIDEV_GPIO_CS 111
-
-static struct pxa2xx_spi_chip spidev_spi_chip = {
- .dma_burst_size = MRFLD_SPI_DEFAULT_DMA_BURST,
- .timeout = MRFLD_SPI_DEFAULT_TIMEOUT,
- .gpio_cs = MRFLD_SPIDEV_GPIO_CS,
-};
-
-static void __init *spidev_platform_data(void *info)
-{
- struct spi_board_info *spi_info = info;
-
- if (intel_mid_identify_cpu() != INTEL_MID_CPU_CHIP_TANGIER)
- return ERR_PTR(-ENODEV);
-
- spi_info->mode = SPI_MODE_0;
- spi_info->controller_data = &spidev_spi_chip;
-
- return NULL;
-}
-
-static const struct devs_id spidev_dev_id __initconst = {
- .name = "spidev",
- .type = SFI_DEV_TYPE_SPI,
- .delay = 0,
- .get_platform_data = &spidev_platform_data,
-};
-
-sfi_device(spidev_dev_id);
deleted file mode 100644
@@ -1,95 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * PCAL9555a platform data initialization file
- *
- * Copyright (C) 2016, Intel Corporation
- *
- * Authors: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- * Dan O'Donovan <dan@emutex.com>
- */
-
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/pca953x.h>
-#include <linux/sfi.h>
-
-#include <asm/intel-mid.h>
-
-#define PCAL9555A_NUM 4
-
-static struct pca953x_platform_data pcal9555a_pdata[PCAL9555A_NUM];
-static int nr;
-
-static void __init *pcal9555a_platform_data(void *info)
-{
- struct i2c_board_info *i2c_info = info;
- char *type = i2c_info->type;
- struct pca953x_platform_data *pcal9555a;
- char base_pin_name[SFI_NAME_LEN + 1];
- char intr_pin_name[SFI_NAME_LEN + 1];
- int gpio_base, intr;
-
- snprintf(base_pin_name, sizeof(base_pin_name), "%s_base", type);
- snprintf(intr_pin_name, sizeof(intr_pin_name), "%s_int", type);
-
- gpio_base = get_gpio_by_name(base_pin_name);
- intr = get_gpio_by_name(intr_pin_name);
-
- /* Check if the SFI record valid */
- if (gpio_base == -1)
- return NULL;
-
- if (nr >= PCAL9555A_NUM) {
- pr_err("%s: Too many instances, only %d supported\n", __func__,
- PCAL9555A_NUM);
- return NULL;
- }
-
- pcal9555a = &pcal9555a_pdata[nr++];
- pcal9555a->gpio_base = gpio_base;
-
- if (intr >= 0) {
- i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
- pcal9555a->irq_base = gpio_base + INTEL_MID_IRQ_OFFSET;
- } else {
- i2c_info->irq = -1;
- pcal9555a->irq_base = -1;
- }
-
- strcpy(type, "pcal9555a");
- return pcal9555a;
-}
-
-static const struct devs_id pcal9555a_1_dev_id __initconst = {
- .name = "pcal9555a-1",
- .type = SFI_DEV_TYPE_I2C,
- .delay = 1,
- .get_platform_data = &pcal9555a_platform_data,
-};
-
-static const struct devs_id pcal9555a_2_dev_id __initconst = {
- .name = "pcal9555a-2",
- .type = SFI_DEV_TYPE_I2C,
- .delay = 1,
- .get_platform_data = &pcal9555a_platform_data,
-};
-
-static const struct devs_id pcal9555a_3_dev_id __initconst = {
- .name = "pcal9555a-3",
- .type = SFI_DEV_TYPE_I2C,
- .delay = 1,
- .get_platform_data = &pcal9555a_platform_data,
-};
-
-static const struct devs_id pcal9555a_4_dev_id __initconst = {
- .name = "pcal9555a-4",
- .type = SFI_DEV_TYPE_I2C,
- .delay = 1,
- .get_platform_data = &pcal9555a_platform_data,
-};
-
-sfi_device(pcal9555a_1_dev_id);
-sfi_device(pcal9555a_2_dev_id);
-sfi_device(pcal9555a_3_dev_id);
-sfi_device(pcal9555a_4_dev_id);
deleted file mode 100644
@@ -1,42 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform_tc35876x.c: tc35876x platform data initialization file
- *
- * (C) Copyright 2013 Intel Corporation
- * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
- */
-
-#include <linux/gpio/machine.h>
-#include <asm/intel-mid.h>
-
-static struct gpiod_lookup_table tc35876x_gpio_table = {
- .dev_id = "i2c_disp_brig",
- .table = {
- GPIO_LOOKUP("0000:00:0c.0", -1, "bridge-reset", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("0000:00:0c.0", -1, "bl-en", GPIO_ACTIVE_HIGH),
- GPIO_LOOKUP("0000:00:0c.0", -1, "vadd", GPIO_ACTIVE_HIGH),
- { },
- },
-};
-
-/*tc35876x DSI_LVDS bridge chip and panel platform data*/
-static void *tc35876x_platform_data(void *data)
-{
- struct gpiod_lookup_table *table = &tc35876x_gpio_table;
- struct gpiod_lookup *lookup = table->table;
-
- lookup[0].chip_hwnum = get_gpio_by_name("LCMB_RXEN");
- lookup[1].chip_hwnum = get_gpio_by_name("6S6P_BL_EN");
- lookup[2].chip_hwnum = get_gpio_by_name("EN_VREG_LCD_V3P3");
- gpiod_add_lookup_table(table);
-
- return NULL;
-}
-
-static const struct devs_id tc35876x_dev_id __initconst = {
- .name = "i2c_disp_brig",
- .type = SFI_DEV_TYPE_I2C,
- .get_platform_data = &tc35876x_platform_data,
-};
-
-sfi_device(tc35876x_dev_id);
deleted file mode 100644
@@ -1,53 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * platform_tca6416.c: tca6416 platform data initialization file
- *
- * (C) Copyright 2013 Intel Corporation
- * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
- */
-
-#include <linux/platform_data/pca953x.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <asm/intel-mid.h>
-
-#define TCA6416_NAME "tca6416"
-#define TCA6416_BASE "tca6416_base"
-#define TCA6416_INTR "tca6416_int"
-
-static void *tca6416_platform_data(void *info)
-{
- static struct pca953x_platform_data tca6416;
- struct i2c_board_info *i2c_info = info;
- int gpio_base, intr;
- char base_pin_name[SFI_NAME_LEN + 1];
- char intr_pin_name[SFI_NAME_LEN + 1];
-
- strcpy(i2c_info->type, TCA6416_NAME);
- strcpy(base_pin_name, TCA6416_BASE);
- strcpy(intr_pin_name, TCA6416_INTR);
-
- gpio_base = get_gpio_by_name(base_pin_name);
- intr = get_gpio_by_name(intr_pin_name);
-
- if (gpio_base < 0)
- return NULL;
- tca6416.gpio_base = gpio_base;
- if (intr >= 0) {
- i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET;
- tca6416.irq_base = gpio_base + INTEL_MID_IRQ_OFFSET;
- } else {
- i2c_info->irq = -1;
- tca6416.irq_base = -1;
- }
- return &tca6416;
-}
-
-static const struct devs_id tca6416_dev_id __initconst = {
- .name = "tca6416",
- .type = SFI_DEV_TYPE_I2C,
- .delay = 1,
- .get_platform_data = &tca6416_platform_data,
-};
-
-sfi_device(tca6416_dev_id);
@@ -14,7 +14,6 @@
#include <linux/interrupt.h>
#include <linux/regulator/machine.h>
#include <linux/scatterlist.h>
-#include <linux/sfi.h>
#include <linux/irq.h>
#include <linux/export.h>
#include <linux/notifier.h>
deleted file mode 100644
@@ -1,419 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * intel_mid_sfi.c: Intel MID SFI initialization code
- *
- * (C) Copyright 2013 Intel Corporation
- * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com>
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/scatterlist.h>
-#include <linux/sfi.h>
-#include <linux/spi/spi.h>
-#include <linux/i2c.h>
-#include <linux/skbuff.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/export.h>
-#include <linux/notifier.h>
-#include <linux/mmc/core.h>
-#include <linux/mmc/card.h>
-#include <linux/blkdev.h>
-
-#include <asm/setup.h>
-#include <asm/mpspec_def.h>
-#include <asm/hw_irq.h>
-#include <asm/apic.h>
-#include <asm/io_apic.h>
-#include <asm/intel-mid.h>
-#include <asm/io.h>
-#include <asm/i8259.h>
-#include <asm/intel_scu_ipc.h>
-#include <asm/reboot.h>
-
-#define SFI_SIG_OEM0 "OEM0"
-#define MAX_IPCDEVS 24
-#define MAX_SCU_SPI 24
-#define MAX_SCU_I2C 24
-
-static struct platform_device *ipc_devs[MAX_IPCDEVS];
-static struct spi_board_info *spi_devs[MAX_SCU_SPI];
-static struct i2c_board_info *i2c_devs[MAX_SCU_I2C];
-static struct sfi_gpio_table_entry *gpio_table;
-static int ipc_next_dev;
-static int spi_next_dev;
-static int i2c_next_dev;
-static int i2c_bus[MAX_SCU_I2C];
-static int gpio_num_entry;
-
-struct blocking_notifier_head intel_scu_notifier =
- BLOCKING_NOTIFIER_INIT(intel_scu_notifier);
-EXPORT_SYMBOL_GPL(intel_scu_notifier);
-
-#define intel_mid_sfi_get_pdata(dev, priv) \
- ((dev)->get_platform_data ? (dev)->get_platform_data(priv) : NULL)
-
-/*
- * Parsing GPIO table first, since the DEVS table will need this table
- * to map the pin name to the actual pin.
- */
-static int __init sfi_parse_gpio(struct sfi_table_header *table)
-{
- struct sfi_table_simple *sb;
- struct sfi_gpio_table_entry *pentry;
- int num, i;
-
- if (gpio_table)
- return 0;
- sb = (struct sfi_table_simple *)table;
- num = SFI_GET_NUM_ENTRIES(sb, struct sfi_gpio_table_entry);
- pentry = (struct sfi_gpio_table_entry *)sb->pentry;
-
- gpio_table = kmemdup(pentry, num * sizeof(*pentry), GFP_KERNEL);
- if (!gpio_table)
- return -1;
- gpio_num_entry = num;
-
- pr_debug("GPIO pin info:\n");
- for (i = 0; i < num; i++, pentry++)
- pr_debug("info[%2d]: controller = %16.16s, pin_name = %16.16s,"
- " pin = %d\n", i,
- pentry->controller_name,
- pentry->pin_name,
- pentry->pin_no);
- return 0;
-}
-
-int get_gpio_by_name(const char *name)
-{
- struct sfi_gpio_table_entry *pentry = gpio_table;
- int i;
-
- if (!pentry)
- return -1;
- for (i = 0; i < gpio_num_entry; i++, pentry++) {
- if (!strncmp(name, pentry->pin_name, SFI_NAME_LEN))
- return pentry->pin_no;
- }
- return -EINVAL;
-}
-
-static void __init intel_scu_ipc_device_register(struct platform_device *pdev)
-{
- if (ipc_next_dev == MAX_IPCDEVS)
- pr_err("too many SCU IPC devices");
- else
- ipc_devs[ipc_next_dev++] = pdev;
-}
-
-static void __init intel_scu_spi_device_register(struct spi_board_info *sdev)
-{
- struct spi_board_info *new_dev;
-
- if (spi_next_dev == MAX_SCU_SPI) {
- pr_err("too many SCU SPI devices");
- return;
- }
-
- new_dev = kzalloc(sizeof(*sdev), GFP_KERNEL);
- if (!new_dev) {
- pr_err("failed to alloc mem for delayed spi dev %s\n",
- sdev->modalias);
- return;
- }
- *new_dev = *sdev;
-
- spi_devs[spi_next_dev++] = new_dev;
-}
-
-static void __init intel_scu_i2c_device_register(int bus,
- struct i2c_board_info *idev)
-{
- struct i2c_board_info *new_dev;
-
- if (i2c_next_dev == MAX_SCU_I2C) {
- pr_err("too many SCU I2C devices");
- return;
- }
-
- new_dev = kzalloc(sizeof(*idev), GFP_KERNEL);
- if (!new_dev) {
- pr_err("failed to alloc mem for delayed i2c dev %s\n",
- idev->type);
- return;
- }
- *new_dev = *idev;
-
- i2c_bus[i2c_next_dev] = bus;
- i2c_devs[i2c_next_dev++] = new_dev;
-}
-
-/* Called by IPC driver */
-void intel_scu_devices_create(void)
-{
- int i;
-
- for (i = 0; i < ipc_next_dev; i++)
- platform_device_add(ipc_devs[i]);
-
- for (i = 0; i < spi_next_dev; i++)
- spi_register_board_info(spi_devs[i], 1);
-
- for (i = 0; i < i2c_next_dev; i++) {
- struct i2c_adapter *adapter;
- struct i2c_client *client;
-
- adapter = i2c_get_adapter(i2c_bus[i]);
- if (adapter) {
- client = i2c_new_client_device(adapter, i2c_devs[i]);
- if (IS_ERR(client))
- pr_err("can't create i2c device %s\n",
- i2c_devs[i]->type);
- } else
- i2c_register_board_info(i2c_bus[i], i2c_devs[i], 1);
- }
- intel_scu_notifier_post(SCU_AVAILABLE, NULL);
-}
-EXPORT_SYMBOL_GPL(intel_scu_devices_create);
-
-/* Called by IPC driver */
-void intel_scu_devices_destroy(void)
-{
- int i;
-
- intel_scu_notifier_post(SCU_DOWN, NULL);
-
- for (i = 0; i < ipc_next_dev; i++)
- platform_device_del(ipc_devs[i]);
-}
-EXPORT_SYMBOL_GPL(intel_scu_devices_destroy);
-
-static void __init install_irq_resource(struct platform_device *pdev, int irq)
-{
- /* Single threaded */
- static struct resource res __initdata = {
- .name = "IRQ",
- .flags = IORESOURCE_IRQ,
- };
- res.start = irq;
- platform_device_add_resources(pdev, &res, 1);
-}
-
-static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *pentry,
- struct devs_id *dev)
-{
- struct platform_device *pdev;
- void *pdata = NULL;
-
- pr_debug("IPC bus, name = %16.16s, irq = 0x%2x\n",
- pentry->name, pentry->irq);
-
- /*
- * We need to call platform init of IPC devices to fill misc_pdata
- * structure. It will be used in msic_init for initialization.
- */
- pdata = intel_mid_sfi_get_pdata(dev, pentry);
- if (IS_ERR(pdata))
- return;
-
- pdev = platform_device_alloc(pentry->name, 0);
- if (pdev == NULL) {
- pr_err("out of memory for SFI platform device '%s'.\n",
- pentry->name);
- return;
- }
- install_irq_resource(pdev, pentry->irq);
-
- pdev->dev.platform_data = pdata;
- if (dev->delay)
- intel_scu_ipc_device_register(pdev);
- else
- platform_device_add(pdev);
-}
-
-static void __init sfi_handle_spi_dev(struct sfi_device_table_entry *pentry,
- struct devs_id *dev)
-{
- struct spi_board_info spi_info;
- void *pdata = NULL;
-
- memset(&spi_info, 0, sizeof(spi_info));
- strncpy(spi_info.modalias, pentry->name, SFI_NAME_LEN);
- spi_info.irq = ((pentry->irq == (u8)0xff) ? 0 : pentry->irq);
- spi_info.bus_num = pentry->host_num;
- spi_info.chip_select = pentry->addr;
- spi_info.max_speed_hz = pentry->max_freq;
- pr_debug("SPI bus=%d, name=%16.16s, irq=0x%2x, max_freq=%d, cs=%d\n",
- spi_info.bus_num,
- spi_info.modalias,
- spi_info.irq,
- spi_info.max_speed_hz,
- spi_info.chip_select);
-
- pdata = intel_mid_sfi_get_pdata(dev, &spi_info);
- if (IS_ERR(pdata))
- return;
-
- spi_info.platform_data = pdata;
- if (dev->delay)
- intel_scu_spi_device_register(&spi_info);
- else
- spi_register_board_info(&spi_info, 1);
-}
-
-static void __init sfi_handle_i2c_dev(struct sfi_device_table_entry *pentry,
- struct devs_id *dev)
-{
- struct i2c_board_info i2c_info;
- void *pdata = NULL;
-
- memset(&i2c_info, 0, sizeof(i2c_info));
- strncpy(i2c_info.type, pentry->name, SFI_NAME_LEN);
- i2c_info.irq = ((pentry->irq == (u8)0xff) ? 0 : pentry->irq);
- i2c_info.addr = pentry->addr;
- pr_debug("I2C bus = %d, name = %16.16s, irq = 0x%2x, addr = 0x%x\n",
- pentry->host_num,
- i2c_info.type,
- i2c_info.irq,
- i2c_info.addr);
- pdata = intel_mid_sfi_get_pdata(dev, &i2c_info);
- i2c_info.platform_data = pdata;
- if (IS_ERR(pdata))
- return;
-
- if (dev->delay)
- intel_scu_i2c_device_register(pentry->host_num, &i2c_info);
- else
- i2c_register_board_info(pentry->host_num, &i2c_info, 1);
-}
-
-static void __init sfi_handle_sd_dev(struct sfi_device_table_entry *pentry,
- struct devs_id *dev)
-{
- struct mid_sd_board_info sd_info;
- void *pdata;
-
- memset(&sd_info, 0, sizeof(sd_info));
- strncpy(sd_info.name, pentry->name, SFI_NAME_LEN);
- sd_info.bus_num = pentry->host_num;
- sd_info.max_clk = pentry->max_freq;
- sd_info.addr = pentry->addr;
- pr_debug("SD bus = %d, name = %16.16s, max_clk = %d, addr = 0x%x\n",
- sd_info.bus_num,
- sd_info.name,
- sd_info.max_clk,
- sd_info.addr);
- pdata = intel_mid_sfi_get_pdata(dev, &sd_info);
- if (IS_ERR(pdata))
- return;
-
- /* Nothing we can do with this for now */
- sd_info.platform_data = pdata;
-
- pr_debug("Successfully registered %16.16s", sd_info.name);
-}
-
-extern struct devs_id *const __x86_intel_mid_dev_start[],
- *const __x86_intel_mid_dev_end[];
-
-static struct devs_id __init *get_device_id(u8 type, char *name)
-{
- struct devs_id *const *dev_table;
-
- for (dev_table = __x86_intel_mid_dev_start;
- dev_table < __x86_intel_mid_dev_end; dev_table++) {
- struct devs_id *dev = *dev_table;
- if (dev->type == type &&
- !strncmp(dev->name, name, SFI_NAME_LEN)) {
- return dev;
- }
- }
-
- return NULL;
-}
-
-static int __init sfi_parse_devs(struct sfi_table_header *table)
-{
- struct sfi_table_simple *sb;
- struct sfi_device_table_entry *pentry;
- struct devs_id *dev = NULL;
- int num, i, ret;
- int polarity;
- struct irq_alloc_info info;
-
- sb = (struct sfi_table_simple *)table;
- num = SFI_GET_NUM_ENTRIES(sb, struct sfi_device_table_entry);
- pentry = (struct sfi_device_table_entry *)sb->pentry;
-
- for (i = 0; i < num; i++, pentry++) {
- int irq = pentry->irq;
-
- if (irq != (u8)0xff) { /* native RTE case */
- /* these SPI2 devices are not exposed to system as PCI
- * devices, but they have separate RTE entry in IOAPIC
- * so we have to enable them one by one here
- */
- if (intel_mid_identify_cpu() ==
- INTEL_MID_CPU_CHIP_TANGIER) {
- if (!strncmp(pentry->name, "r69001-ts-i2c", 13))
- /* active low */
- polarity = 1;
- else if (!strncmp(pentry->name,
- "synaptics_3202", 14))
- /* active low */
- polarity = 1;
- else if (irq == 41)
- /* fast_int_1 */
- polarity = 1;
- else
- /* active high */
- polarity = 0;
- } else {
- /* PNW and CLV go with active low */
- polarity = 1;
- }
-
- ioapic_set_alloc_attr(&info, NUMA_NO_NODE, 1, polarity);
- ret = mp_map_gsi_to_irq(irq, IOAPIC_MAP_ALLOC, &info);
- WARN_ON(ret < 0);
- }
-
- dev = get_device_id(pentry->type, pentry->name);
-
- if (!dev)
- continue;
-
- switch (pentry->type) {
- case SFI_DEV_TYPE_IPC:
- sfi_handle_ipc_dev(pentry, dev);
- break;
- case SFI_DEV_TYPE_SPI:
- sfi_handle_spi_dev(pentry, dev);
- break;
- case SFI_DEV_TYPE_I2C:
- sfi_handle_i2c_dev(pentry, dev);
- break;
- case SFI_DEV_TYPE_SD:
- sfi_handle_sd_dev(pentry, dev);
- break;
- case SFI_DEV_TYPE_UART:
- case SFI_DEV_TYPE_HSI:
- default:
- break;
- }
- }
- return 0;
-}
-
-static int __init intel_mid_platform_init(void)
-{
- sfi_table_parse(SFI_SIG_GPIO, NULL, NULL, sfi_parse_gpio);
- sfi_table_parse(SFI_SIG_DEVS, NULL, NULL, sfi_parse_devs);
- return 0;
-}
-arch_initcall(intel_mid_platform_init);
deleted file mode 100644
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_SFI) += sfi.o
deleted file mode 100644
@@ -1,100 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * sfi.c - x86 architecture SFI support.
- *
- * Copyright (c) 2009, Intel Corporation.
- */
-
-#define KMSG_COMPONENT "SFI"
-#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
-
-#include <linux/acpi.h>
-#include <linux/init.h>
-#include <linux/sfi.h>
-#include <linux/io.h>
-
-#include <asm/irqdomain.h>
-#include <asm/io_apic.h>
-#include <asm/mpspec.h>
-#include <asm/setup.h>
-#include <asm/apic.h>
-
-#ifdef CONFIG_X86_LOCAL_APIC
-static unsigned long sfi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
-
-/* All CPUs enumerated by SFI must be present and enabled */
-static void __init mp_sfi_register_lapic(u8 id)
-{
- if (MAX_LOCAL_APIC - id <= 0) {
- pr_warn("Processor #%d invalid (max %d)\n", id, MAX_LOCAL_APIC);
- return;
- }
-
- pr_info("registering lapic[%d]\n", id);
-
- generic_processor_info(id, GET_APIC_VERSION(apic_read(APIC_LVR)));
-}
-
-static int __init sfi_parse_cpus(struct sfi_table_header *table)
-{
- struct sfi_table_simple *sb;
- struct sfi_cpu_table_entry *pentry;
- int i;
- int cpu_num;
-
- sb = (struct sfi_table_simple *)table;
- cpu_num = SFI_GET_NUM_ENTRIES(sb, struct sfi_cpu_table_entry);
- pentry = (struct sfi_cpu_table_entry *)sb->pentry;
-
- for (i = 0; i < cpu_num; i++) {
- mp_sfi_register_lapic(pentry->apic_id);
- pentry++;
- }
-
- smp_found_config = 1;
- return 0;
-}
-#endif /* CONFIG_X86_LOCAL_APIC */
-
-#ifdef CONFIG_X86_IO_APIC
-
-static int __init sfi_parse_ioapic(struct sfi_table_header *table)
-{
- struct sfi_table_simple *sb;
- struct sfi_apic_table_entry *pentry;
- int i, num;
- struct ioapic_domain_cfg cfg = {
- .type = IOAPIC_DOMAIN_STRICT,
- .ops = &mp_ioapic_irqdomain_ops,
- };
-
- sb = (struct sfi_table_simple *)table;
- num = SFI_GET_NUM_ENTRIES(sb, struct sfi_apic_table_entry);
- pentry = (struct sfi_apic_table_entry *)sb->pentry;
-
- for (i = 0; i < num; i++) {
- mp_register_ioapic(i, pentry->phys_addr, gsi_top, &cfg);
- pentry++;
- }
-
- WARN(pic_mode, KERN_WARNING
- "SFI: pic_mod shouldn't be 1 when IOAPIC table is present\n");
- pic_mode = 0;
- return 0;
-}
-#endif /* CONFIG_X86_IO_APIC */
-
-/*
- * sfi_platform_init(): register lapics & io-apics
- */
-int __init sfi_platform_init(void)
-{
-#ifdef CONFIG_X86_LOCAL_APIC
- register_lapic_address(sfi_lapic_addr);
- sfi_table_parse(SFI_SIG_CPUS, NULL, NULL, sfi_parse_cpus);
-#endif
-#ifdef CONFIG_X86_IO_APIC
- sfi_table_parse(SFI_SIG_APIC, NULL, NULL, sfi_parse_ioapic);
-#endif
- return 0;
-}
@@ -27,7 +27,7 @@ obj-y += idle/
obj-y += char/ipmi/
obj-$(CONFIG_ACPI) += acpi/
-obj-$(CONFIG_SFI) += sfi/
+
# PnP must come after ACPI since it will eventually need to check if acpi
# was used and do nothing if so
obj-$(CONFIG_PNP) += pnp/
@@ -17,7 +17,6 @@
static int intel_scu_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
- void (*setup_fn)(void) = (void (*)(void))id->driver_data;
struct intel_scu_ipc_data scu_data = {};
struct intel_scu_ipc_dev *scu;
int ret;
@@ -30,27 +29,14 @@ static int intel_scu_pci_probe(struct pci_dev *pdev,
scu_data.irq = pdev->irq;
scu = intel_scu_ipc_register(&pdev->dev, &scu_data);
- if (IS_ERR(scu))
- return PTR_ERR(scu);
-
- if (setup_fn)
- setup_fn();
- return 0;
-}
-
-static void intel_mid_scu_setup(void)
-{
- intel_scu_devices_create();
+ return PTR_ERR_OR_ZERO(scu);
}
static const struct pci_device_id pci_ids[] = {
- { PCI_VDEVICE(INTEL, 0x080e),
- .driver_data = (kernel_ulong_t)intel_mid_scu_setup },
- { PCI_VDEVICE(INTEL, 0x08ea),
- .driver_data = (kernel_ulong_t)intel_mid_scu_setup },
+ { PCI_VDEVICE(INTEL, 0x080e) },
+ { PCI_VDEVICE(INTEL, 0x08ea) },
{ PCI_VDEVICE(INTEL, 0x0a94) },
- { PCI_VDEVICE(INTEL, 0x11a0),
- .driver_data = (kernel_ulong_t)intel_mid_scu_setup },
+ { PCI_VDEVICE(INTEL, 0x11a0) },
{ PCI_VDEVICE(INTEL, 0x1a94) },
{ PCI_VDEVICE(INTEL, 0x5a94) },
{}
deleted file mode 100644
@@ -1,18 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# SFI Configuration
-#
-
-menuconfig SFI
- bool "SFI (Simple Firmware Interface) Support"
- help
- The Simple Firmware Interface (SFI) provides a lightweight method
- for platform firmware to pass information to the operating system
- via static tables in memory. Kernel SFI support is required to
- boot on SFI-only platforms. Currently, all SFI-only platforms are
- based on the 2nd generation Intel Atom processor platform,
- code-named Moorestown.
-
- For more information, see http://simplefirmware.org
-
- Say 'Y' here to enable the kernel to boot on SFI-only platforms.
deleted file mode 100644
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-y += sfi_acpi.o
-obj-y += sfi_core.o
-
deleted file mode 100644
@@ -1,214 +0,0 @@
-/* sfi_acpi.c Simple Firmware Interface - ACPI extensions */
-
-/*
-
- This file is provided under a dual BSD/GPLv2 license. When using or
- redistributing this file, you may do so under either license.
-
- GPL LICENSE SUMMARY
-
- Copyright(c) 2009 Intel Corporation. All rights reserved.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of version 2 of the GNU General Public License as
- published by the Free Software Foundation.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- The full GNU General Public License is included in this distribution
- in the file called LICENSE.GPL.
-
- BSD LICENSE
-
- Copyright(c) 2009 Intel Corporation. All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- * Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- * Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
- * Neither the name of Intel Corporation nor the names of its
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-*/
-
-#define KMSG_COMPONENT "SFI"
-#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/sfi_acpi.h>
-#include "sfi_core.h"
-
-/*
- * SFI can access ACPI-defined tables via an optional ACPI XSDT.
- *
- * This allows re-use, and avoids re-definition, of standard tables.
- * For example, the "MCFG" table is defined by PCI, reserved by ACPI,
- * and is expected to be present many SFI-only systems.
- */
-
-static struct acpi_table_xsdt *xsdt_va __read_mostly;
-
-#define XSDT_GET_NUM_ENTRIES(ptable, entry_type) \
- ((ptable->header.length - sizeof(struct acpi_table_header)) / \
- (sizeof(entry_type)))
-
-static inline struct sfi_table_header *acpi_to_sfi_th(
- struct acpi_table_header *th)
-{
- return (struct sfi_table_header *)th;
-}
-
-static inline struct acpi_table_header *sfi_to_acpi_th(
- struct sfi_table_header *th)
-{
- return (struct acpi_table_header *)th;
-}
-
-/*
- * sfi_acpi_parse_xsdt()
- *
- * Parse the ACPI XSDT for later access by sfi_acpi_table_parse().
- */
-static int __init sfi_acpi_parse_xsdt(struct sfi_table_header *th)
-{
- struct sfi_table_key key = SFI_ANY_KEY;
- int tbl_cnt, i;
- void *ret;
-
- xsdt_va = (struct acpi_table_xsdt *)th;
- tbl_cnt = XSDT_GET_NUM_ENTRIES(xsdt_va, u64);
- for (i = 0; i < tbl_cnt; i++) {
- ret = sfi_check_table(xsdt_va->table_offset_entry[i], &key);
- if (IS_ERR(ret)) {
- disable_sfi();
- return -1;
- }
- }
-
- return 0;
-}
-
-int __init sfi_acpi_init(void)
-{
- struct sfi_table_key xsdt_key = { .sig = SFI_SIG_XSDT };
-
- sfi_table_parse(SFI_SIG_XSDT, NULL, NULL, sfi_acpi_parse_xsdt);
-
- /* Only call the get_table to keep the table mapped */
- xsdt_va = (struct acpi_table_xsdt *)sfi_get_table(&xsdt_key);
- return 0;
-}
-
-static struct acpi_table_header *sfi_acpi_get_table(struct sfi_table_key *key)
-{
- u32 tbl_cnt, i;
- void *ret;
-
- tbl_cnt = XSDT_GET_NUM_ENTRIES(xsdt_va, u64);
- for (i = 0; i < tbl_cnt; i++) {
- ret = sfi_check_table(xsdt_va->table_offset_entry[i], key);
- if (!IS_ERR(ret) && ret)
- return sfi_to_acpi_th(ret);
- }
-
- return NULL;
-}
-
-static void sfi_acpi_put_table(struct acpi_table_header *table)
-{
- sfi_put_table(acpi_to_sfi_th(table));
-}
-
-/*
- * sfi_acpi_table_parse()
- *
- * Find specified table in XSDT, run handler on it and return its return value
- */
-int sfi_acpi_table_parse(char *signature, char *oem_id, char *oem_table_id,
- int(*handler)(struct acpi_table_header *))
-{
- struct acpi_table_header *table = NULL;
- struct sfi_table_key key;
- int ret = 0;
-
- if (sfi_disabled)
- return -1;
-
- key.sig = signature;
- key.oem_id = oem_id;
- key.oem_table_id = oem_table_id;
-
- table = sfi_acpi_get_table(&key);
- if (!table)
- return -EINVAL;
-
- ret = handler(table);
- sfi_acpi_put_table(table);
- return ret;
-}
-
-static ssize_t sfi_acpi_table_show(struct file *filp, struct kobject *kobj,
- struct bin_attribute *bin_attr, char *buf,
- loff_t offset, size_t count)
-{
- struct sfi_table_attr *tbl_attr =
- container_of(bin_attr, struct sfi_table_attr, attr);
- struct acpi_table_header *th = NULL;
- struct sfi_table_key key;
- ssize_t cnt;
-
- key.sig = tbl_attr->name;
- key.oem_id = NULL;
- key.oem_table_id = NULL;
-
- th = sfi_acpi_get_table(&key);
- if (!th)
- return 0;
-
- cnt = memory_read_from_buffer(buf, count, &offset,
- th, th->length);
- sfi_acpi_put_table(th);
-
- return cnt;
-}
-
-
-void __init sfi_acpi_sysfs_init(void)
-{
- u32 tbl_cnt, i;
- struct sfi_table_attr *tbl_attr;
-
- tbl_cnt = XSDT_GET_NUM_ENTRIES(xsdt_va, u64);
- for (i = 0; i < tbl_cnt; i++) {
- tbl_attr =
- sfi_sysfs_install_table(xsdt_va->table_offset_entry[i]);
- tbl_attr->attr.read = sfi_acpi_table_show;
- }
-
- return;
-}
deleted file mode 100644
@@ -1,522 +0,0 @@
-/* sfi_core.c Simple Firmware Interface - core internals */
-
-/*
-
- This file is provided under a dual BSD/GPLv2 license. When using or
- redistributing this file, you may do so under either license.
-
- GPL LICENSE SUMMARY
-
- Copyright(c) 2009 Intel Corporation. All rights reserved.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of version 2 of the GNU General Public License as
- published by the Free Software Foundation.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- The full GNU General Public License is included in this distribution
- in the file called LICENSE.GPL.
-
- BSD LICENSE
-
- Copyright(c) 2009 Intel Corporation. All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- * Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- * Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
- * Neither the name of Intel Corporation nor the names of its
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-*/
-
-#define KMSG_COMPONENT "SFI"
-#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
-
-#include <linux/memblock.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/acpi.h>
-#include <linux/init.h>
-#include <linux/sfi.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-
-#include "sfi_core.h"
-
-#define ON_SAME_PAGE(addr1, addr2) \
- (((unsigned long)(addr1) & PAGE_MASK) == \
- ((unsigned long)(addr2) & PAGE_MASK))
-#define TABLE_ON_PAGE(page, table, size) (ON_SAME_PAGE(page, table) && \
- ON_SAME_PAGE(page, table + size))
-
-int sfi_disabled __read_mostly;
-EXPORT_SYMBOL(sfi_disabled);
-
-static u64 syst_pa __read_mostly;
-static struct sfi_table_simple *syst_va __read_mostly;
-
-/*
- * FW creates and saves the SFI tables in memory. When these tables get
- * used, they may need to be mapped to virtual address space, and the mapping
- * can happen before or after the memremap() is ready, so a flag is needed
- * to indicating this
- */
-static u32 sfi_use_memremap __read_mostly;
-
-/*
- * sfi_un/map_memory calls early_memremap/memunmap which is a __init function
- * and introduces section mismatch. So use __ref to make it calm.
- */
-static void __iomem * __ref sfi_map_memory(u64 phys, u32 size)
-{
- if (!phys || !size)
- return NULL;
-
- if (sfi_use_memremap)
- return memremap(phys, size, MEMREMAP_WB);
- else
- return early_memremap(phys, size);
-}
-
-static void __ref sfi_unmap_memory(void __iomem *virt, u32 size)
-{
- if (!virt || !size)
- return;
-
- if (sfi_use_memremap)
- memunmap(virt);
- else
- early_memunmap(virt, size);
-}
-
-static void sfi_print_table_header(unsigned long long pa,
- struct sfi_table_header *header)
-{
- pr_info("%4.4s %llX, %04X (v%d %6.6s %8.8s)\n",
- header->sig, pa,
- header->len, header->rev, header->oem_id,
- header->oem_table_id);
-}
-
-/*
- * sfi_verify_table()
- * Sanity check table lengh, calculate checksum
- */
-static int sfi_verify_table(struct sfi_table_header *table)
-{
-
- u8 checksum = 0;
- u8 *puchar = (u8 *)table;
- u32 length = table->len;
-
- /* Sanity check table length against arbitrary 1MB limit */
- if (length > 0x100000) {
- pr_err("Invalid table length 0x%x\n", length);
- return -1;
- }
-
- while (length--)
- checksum += *puchar++;
-
- if (checksum) {
- pr_err("Checksum %2.2X should be %2.2X\n",
- table->csum, table->csum - checksum);
- return -1;
- }
- return 0;
-}
-
-/*
- * sfi_map_table()
- *
- * Return address of mapped table
- * Check for common case that we can re-use mapping to SYST,
- * which requires syst_pa, syst_va to be initialized.
- */
-static struct sfi_table_header *sfi_map_table(u64 pa)
-{
- struct sfi_table_header *th;
- u32 length;
-
- if (!TABLE_ON_PAGE(syst_pa, pa, sizeof(struct sfi_table_header)))
- th = sfi_map_memory(pa, sizeof(struct sfi_table_header));
- else
- th = (void *)syst_va + (pa - syst_pa);
-
- /* If table fits on same page as its header, we are done */
- if (TABLE_ON_PAGE(th, th, th->len))
- return th;
-
- /* Entire table does not fit on same page as SYST */
- length = th->len;
- if (!TABLE_ON_PAGE(syst_pa, pa, sizeof(struct sfi_table_header)))
- sfi_unmap_memory(th, sizeof(struct sfi_table_header));
-
- return sfi_map_memory(pa, length);
-}
-
-/*
- * sfi_unmap_table()
- *
- * Undoes effect of sfi_map_table() by unmapping table
- * if it did not completely fit on same page as SYST.
- */
-static void sfi_unmap_table(struct sfi_table_header *th)
-{
- if (!TABLE_ON_PAGE(syst_va, th, th->len))
- sfi_unmap_memory(th, TABLE_ON_PAGE(th, th, th->len) ?
- sizeof(*th) : th->len);
-}
-
-static int sfi_table_check_key(struct sfi_table_header *th,
- struct sfi_table_key *key)
-{
-
- if (strncmp(th->sig, key->sig, SFI_SIGNATURE_SIZE)
- || (key->oem_id && strncmp(th->oem_id,
- key->oem_id, SFI_OEM_ID_SIZE))
- || (key->oem_table_id && strncmp(th->oem_table_id,
- key->oem_table_id, SFI_OEM_TABLE_ID_SIZE)))
- return -1;
-
- return 0;
-}
-
-/*
- * This function will be used in 2 cases:
- * 1. used to enumerate and verify the tables addressed by SYST/XSDT,
- * thus no signature will be given (in kernel boot phase)
- * 2. used to parse one specific table, signature must exist, and
- * the mapped virt address will be returned, and the virt space
- * will be released by call sfi_put_table() later
- *
- * This two cases are from two different functions with two different
- * sections and causes section mismatch warning. So use __ref to tell
- * modpost not to make any noise.
- *
- * Return value:
- * NULL: when can't find a table matching the key
- * ERR_PTR(error): error value
- * virt table address: when a matched table is found
- */
-struct sfi_table_header *
- __ref sfi_check_table(u64 pa, struct sfi_table_key *key)
-{
- struct sfi_table_header *th;
- void *ret = NULL;
-
- th = sfi_map_table(pa);
- if (!th)
- return ERR_PTR(-ENOMEM);
-
- if (!key->sig) {
- sfi_print_table_header(pa, th);
- if (sfi_verify_table(th))
- ret = ERR_PTR(-EINVAL);
- } else {
- if (!sfi_table_check_key(th, key))
- return th; /* Success */
- }
-
- sfi_unmap_table(th);
- return ret;
-}
-
-/*
- * sfi_get_table()
- *
- * Search SYST for the specified table with the signature in
- * the key, and return the mapped table
- */
-struct sfi_table_header *sfi_get_table(struct sfi_table_key *key)
-{
- struct sfi_table_header *th;
- u32 tbl_cnt, i;
-
- tbl_cnt = SFI_GET_NUM_ENTRIES(syst_va, u64);
- for (i = 0; i < tbl_cnt; i++) {
- th = sfi_check_table(syst_va->pentry[i], key);
- if (!IS_ERR(th) && th)
- return th;
- }
-
- return NULL;
-}
-
-void sfi_put_table(struct sfi_table_header *th)
-{
- sfi_unmap_table(th);
-}
-
-/* Find table with signature, run handler on it */
-int sfi_table_parse(char *signature, char *oem_id, char *oem_table_id,
- sfi_table_handler handler)
-{
- struct sfi_table_header *table = NULL;
- struct sfi_table_key key;
- int ret = -EINVAL;
-
- if (sfi_disabled || !handler || !signature)
- goto exit;
-
- key.sig = signature;
- key.oem_id = oem_id;
- key.oem_table_id = oem_table_id;
-
- table = sfi_get_table(&key);
- if (!table)
- goto exit;
-
- ret = handler(table);
- sfi_put_table(table);
-exit:
- return ret;
-}
-EXPORT_SYMBOL_GPL(sfi_table_parse);
-
-/*
- * sfi_parse_syst()
- * Checksum all the tables in SYST and print their headers
- *
- * success: set syst_va, return 0
- */
-static int __init sfi_parse_syst(void)
-{
- struct sfi_table_key key = SFI_ANY_KEY;
- int tbl_cnt, i;
- void *ret;
-
- syst_va = sfi_map_memory(syst_pa, sizeof(struct sfi_table_simple));
- if (!syst_va)
- return -ENOMEM;
-
- tbl_cnt = SFI_GET_NUM_ENTRIES(syst_va, u64);
- for (i = 0; i < tbl_cnt; i++) {
- ret = sfi_check_table(syst_va->pentry[i], &key);
- if (IS_ERR(ret))
- return PTR_ERR(ret);
- }
-
- return 0;
-}
-
-/*
- * The OS finds the System Table by searching 16-byte boundaries between
- * physical address 0x000E0000 and 0x000FFFFF. The OS shall search this region
- * starting at the low address and shall stop searching when the 1st valid SFI
- * System Table is found.
- *
- * success: set syst_pa, return 0
- * fail: return -1
- */
-static __init int sfi_find_syst(void)
-{
- unsigned long offset, len;
- void *start;
-
- len = SFI_SYST_SEARCH_END - SFI_SYST_SEARCH_BEGIN;
- start = sfi_map_memory(SFI_SYST_SEARCH_BEGIN, len);
- if (!start)
- return -1;
-
- for (offset = 0; offset < len; offset += 16) {
- struct sfi_table_header *syst_hdr;
-
- syst_hdr = start + offset;
- if (strncmp(syst_hdr->sig, SFI_SIG_SYST,
- SFI_SIGNATURE_SIZE))
- continue;
-
- if (syst_hdr->len > PAGE_SIZE)
- continue;
-
- sfi_print_table_header(SFI_SYST_SEARCH_BEGIN + offset,
- syst_hdr);
-
- if (sfi_verify_table(syst_hdr))
- continue;
-
- /*
- * Enforce SFI spec mandate that SYST reside within a page.
- */
- if (!ON_SAME_PAGE(syst_pa, syst_pa + syst_hdr->len)) {
- pr_info("SYST 0x%llx + 0x%x crosses page\n",
- syst_pa, syst_hdr->len);
- continue;
- }
-
- /* Success */
- syst_pa = SFI_SYST_SEARCH_BEGIN + offset;
- sfi_unmap_memory(start, len);
- return 0;
- }
-
- sfi_unmap_memory(start, len);
- return -1;
-}
-
-static struct kobject *sfi_kobj;
-static struct kobject *tables_kobj;
-
-static ssize_t sfi_table_show(struct file *filp, struct kobject *kobj,
- struct bin_attribute *bin_attr, char *buf,
- loff_t offset, size_t count)
-{
- struct sfi_table_attr *tbl_attr =
- container_of(bin_attr, struct sfi_table_attr, attr);
- struct sfi_table_header *th = NULL;
- struct sfi_table_key key;
- ssize_t cnt;
-
- key.sig = tbl_attr->name;
- key.oem_id = NULL;
- key.oem_table_id = NULL;
-
- if (strncmp(SFI_SIG_SYST, tbl_attr->name, SFI_SIGNATURE_SIZE)) {
- th = sfi_get_table(&key);
- if (!th)
- return 0;
-
- cnt = memory_read_from_buffer(buf, count, &offset,
- th, th->len);
- sfi_put_table(th);
- } else
- cnt = memory_read_from_buffer(buf, count, &offset,
- syst_va, syst_va->header.len);
-
- return cnt;
-}
-
-struct sfi_table_attr __init *sfi_sysfs_install_table(u64 pa)
-{
- struct sfi_table_attr *tbl_attr;
- struct sfi_table_header *th;
- int ret;
-
- tbl_attr = kzalloc(sizeof(struct sfi_table_attr), GFP_KERNEL);
- if (!tbl_attr)
- return NULL;
-
- th = sfi_map_table(pa);
- if (!th || !th->sig[0]) {
- kfree(tbl_attr);
- return NULL;
- }
-
- sysfs_attr_init(&tbl_attr->attr.attr);
- memcpy(tbl_attr->name, th->sig, SFI_SIGNATURE_SIZE);
-
- tbl_attr->attr.size = 0;
- tbl_attr->attr.read = sfi_table_show;
- tbl_attr->attr.attr.name = tbl_attr->name;
- tbl_attr->attr.attr.mode = 0400;
-
- ret = sysfs_create_bin_file(tables_kobj,
- &tbl_attr->attr);
- if (ret) {
- kfree(tbl_attr);
- tbl_attr = NULL;
- }
-
- sfi_unmap_table(th);
- return tbl_attr;
-}
-
-static int __init sfi_sysfs_init(void)
-{
- int tbl_cnt, i;
-
- if (sfi_disabled)
- return 0;
-
- sfi_kobj = kobject_create_and_add("sfi", firmware_kobj);
- if (!sfi_kobj)
- return 0;
-
- tables_kobj = kobject_create_and_add("tables", sfi_kobj);
- if (!tables_kobj) {
- kobject_put(sfi_kobj);
- return 0;
- }
-
- sfi_sysfs_install_table(syst_pa);
-
- tbl_cnt = SFI_GET_NUM_ENTRIES(syst_va, u64);
-
- for (i = 0; i < tbl_cnt; i++)
- sfi_sysfs_install_table(syst_va->pentry[i]);
-
- sfi_acpi_sysfs_init();
- kobject_uevent(sfi_kobj, KOBJ_ADD);
- kobject_uevent(tables_kobj, KOBJ_ADD);
- pr_info("SFI sysfs interfaces init success\n");
- return 0;
-}
-
-void __init sfi_init(void)
-{
- if (!acpi_disabled)
- disable_sfi();
-
- if (sfi_disabled)
- return;
-
- pr_info("Simple Firmware Interface v0.81 http://simplefirmware.org\n");
-
- if (sfi_find_syst() || sfi_parse_syst() || sfi_platform_init())
- disable_sfi();
-
- return;
-}
-
-void __init sfi_init_late(void)
-{
- int length;
-
- if (sfi_disabled)
- return;
-
- length = syst_va->header.len;
- sfi_unmap_memory(syst_va, sizeof(struct sfi_table_simple));
-
- /* Use memremap now after it is ready */
- sfi_use_memremap = 1;
- syst_va = sfi_map_memory(syst_pa, length);
-
- sfi_acpi_init();
-}
-
-/*
- * The reason we put it here because we need wait till the /sys/firmware
- * is setup, then our interface can be registered in /sys/firmware/sfi
- */
-core_initcall(sfi_sysfs_init);
deleted file mode 100644
@@ -1,81 +0,0 @@
-/* sfi_core.h Simple Firmware Interface, internal header */
-
-/*
-
- This file is provided under a dual BSD/GPLv2 license. When using or
- redistributing this file, you may do so under either license.
-
- GPL LICENSE SUMMARY
-
- Copyright(c) 2009 Intel Corporation. All rights reserved.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of version 2 of the GNU General Public License as
- published by the Free Software Foundation.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- The full GNU General Public License is included in this distribution
- in the file called LICENSE.GPL.
-
- BSD LICENSE
-
- Copyright(c) 2009 Intel Corporation. All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- * Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- * Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
- * Neither the name of Intel Corporation nor the names of its
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-*/
-
-#include <linux/sysfs.h>
-
-struct sfi_table_key{
- char *sig;
- char *oem_id;
- char *oem_table_id;
-};
-
-/* sysfs interface */
-struct sfi_table_attr {
- struct bin_attribute attr;
- char name[8];
-};
-
-#define SFI_ANY_KEY { .sig = NULL, .oem_id = NULL, .oem_table_id = NULL }
-
-extern int __init sfi_acpi_init(void);
-extern struct sfi_table_header *sfi_check_table(u64 paddr,
- struct sfi_table_key *key);
-struct sfi_table_header *sfi_get_table(struct sfi_table_key *key);
-extern void sfi_put_table(struct sfi_table_header *table);
-extern struct sfi_table_attr __init *sfi_sysfs_install_table(u64 pa);
-extern void __init sfi_acpi_sysfs_init(void);
deleted file mode 100644
@@ -1,210 +0,0 @@
-/* sfi.h Simple Firmware Interface */
-
-/*
-
- This file is provided under a dual BSD/GPLv2 license. When using or
- redistributing this file, you may do so under either license.
-
- GPL LICENSE SUMMARY
-
- Copyright(c) 2009 Intel Corporation. All rights reserved.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of version 2 of the GNU General Public License as
- published by the Free Software Foundation.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- The full GNU General Public License is included in this distribution
- in the file called LICENSE.GPL.
-
- BSD LICENSE
-
- Copyright(c) 2009 Intel Corporation. All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- * Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- * Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
- * Neither the name of Intel Corporation nor the names of its
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-*/
-
-#ifndef _LINUX_SFI_H
-#define _LINUX_SFI_H
-
-#include <linux/init.h>
-#include <linux/types.h>
-
-/* Table signatures reserved by the SFI specification */
-#define SFI_SIG_SYST "SYST"
-#define SFI_SIG_FREQ "FREQ"
-#define SFI_SIG_IDLE "IDLE"
-#define SFI_SIG_CPUS "CPUS"
-#define SFI_SIG_MTMR "MTMR"
-#define SFI_SIG_MRTC "MRTC"
-#define SFI_SIG_MMAP "MMAP"
-#define SFI_SIG_APIC "APIC"
-#define SFI_SIG_XSDT "XSDT"
-#define SFI_SIG_WAKE "WAKE"
-#define SFI_SIG_DEVS "DEVS"
-#define SFI_SIG_GPIO "GPIO"
-
-#define SFI_SIGNATURE_SIZE 4
-#define SFI_OEM_ID_SIZE 6
-#define SFI_OEM_TABLE_ID_SIZE 8
-
-#define SFI_NAME_LEN 16
-
-#define SFI_SYST_SEARCH_BEGIN 0x000E0000
-#define SFI_SYST_SEARCH_END 0x000FFFFF
-
-#define SFI_GET_NUM_ENTRIES(ptable, entry_type) \
- ((ptable->header.len - sizeof(struct sfi_table_header)) / \
- (sizeof(entry_type)))
-/*
- * Table structures must be byte-packed to match the SFI specification,
- * as they are provided by the BIOS.
- */
-struct sfi_table_header {
- char sig[SFI_SIGNATURE_SIZE];
- u32 len;
- u8 rev;
- u8 csum;
- char oem_id[SFI_OEM_ID_SIZE];
- char oem_table_id[SFI_OEM_TABLE_ID_SIZE];
-} __packed;
-
-struct sfi_table_simple {
- struct sfi_table_header header;
- u64 pentry[1];
-} __packed;
-
-/* Comply with UEFI spec 2.1 */
-struct sfi_mem_entry {
- u32 type;
- u64 phys_start;
- u64 virt_start;
- u64 pages;
- u64 attrib;
-} __packed;
-
-struct sfi_cpu_table_entry {
- u32 apic_id;
-} __packed;
-
-struct sfi_cstate_table_entry {
- u32 hint; /* MWAIT hint */
- u32 latency; /* latency in ms */
-} __packed;
-
-struct sfi_apic_table_entry {
- u64 phys_addr; /* phy base addr for APIC reg */
-} __packed;
-
-struct sfi_freq_table_entry {
- u32 freq_mhz; /* in MHZ */
- u32 latency; /* transition latency in ms */
- u32 ctrl_val; /* value to write to PERF_CTL */
-} __packed;
-
-struct sfi_wake_table_entry {
- u64 phys_addr; /* pointer to where the wake vector locates */
-} __packed;
-
-struct sfi_timer_table_entry {
- u64 phys_addr; /* phy base addr for the timer */
- u32 freq_hz; /* in HZ */
- u32 irq;
-} __packed;
-
-struct sfi_rtc_table_entry {
- u64 phys_addr; /* phy base addr for the RTC */
- u32 irq;
-} __packed;
-
-struct sfi_device_table_entry {
- u8 type; /* bus type, I2C, SPI or ...*/
-#define SFI_DEV_TYPE_SPI 0
-#define SFI_DEV_TYPE_I2C 1
-#define SFI_DEV_TYPE_UART 2
-#define SFI_DEV_TYPE_HSI 3
-#define SFI_DEV_TYPE_IPC 4
-#define SFI_DEV_TYPE_SD 5
-
- u8 host_num; /* attached to host 0, 1...*/
- u16 addr;
- u8 irq;
- u32 max_freq;
- char name[SFI_NAME_LEN];
-} __packed;
-
-struct sfi_gpio_table_entry {
- char controller_name[SFI_NAME_LEN];
- u16 pin_no;
- char pin_name[SFI_NAME_LEN];
-} __packed;
-
-typedef int (*sfi_table_handler) (struct sfi_table_header *table);
-
-#ifdef CONFIG_SFI
-extern void __init sfi_init(void);
-extern int __init sfi_platform_init(void);
-extern void __init sfi_init_late(void);
-extern int sfi_table_parse(char *signature, char *oem_id, char *oem_table_id,
- sfi_table_handler handler);
-
-extern int sfi_disabled;
-static inline void disable_sfi(void)
-{
- sfi_disabled = 1;
-}
-
-#else /* !CONFIG_SFI */
-
-static inline void sfi_init(void)
-{
-}
-
-static inline void sfi_init_late(void)
-{
-}
-
-#define sfi_disabled 0
-
-static inline int sfi_table_parse(char *signature, char *oem_id,
- char *oem_table_id,
- sfi_table_handler handler)
-{
- return -1;
-}
-
-#endif /* !CONFIG_SFI */
-
-#endif /*_LINUX_SFI_H*/
deleted file mode 100644
@@ -1,93 +0,0 @@
-/* sfi.h Simple Firmware Interface */
-
-/*
-
- This file is provided under a dual BSD/GPLv2 license. When using or
- redistributing this file, you may do so under either license.
-
- GPL LICENSE SUMMARY
-
- Copyright(c) 2009 Intel Corporation. All rights reserved.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of version 2 of the GNU General Public License as
- published by the Free Software Foundation.
-
- This program is distributed in the hope that it will be useful, but
- WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- The full GNU General Public License is included in this distribution
- in the file called LICENSE.GPL.
-
- BSD LICENSE
-
- Copyright(c) 2009 Intel Corporation. All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- * Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- * Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
- * Neither the name of Intel Corporation nor the names of its
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-*/
-
-#ifndef _LINUX_SFI_ACPI_H
-#define _LINUX_SFI_ACPI_H
-
-#include <linux/acpi.h>
-#include <linux/sfi.h>
-
-#ifdef CONFIG_SFI
-extern int sfi_acpi_table_parse(char *signature, char *oem_id,
- char *oem_table_id,
- int (*handler)(struct acpi_table_header *));
-
-static inline int __init acpi_sfi_table_parse(char *signature,
- int (*handler)(struct acpi_table_header *))
-{
- if (!acpi_table_parse(signature, handler))
- return 0;
-
- return sfi_acpi_table_parse(signature, NULL, NULL, handler);
-}
-#else /* !CONFIG_SFI */
-static inline int sfi_acpi_table_parse(char *signature, char *oem_id,
- char *oem_table_id,
- int (*handler)(struct acpi_table_header *))
-{
- return -1;
-}
-
-static inline int __init acpi_sfi_table_parse(char *signature,
- int (*handler)(struct acpi_table_header *))
-{
- return acpi_table_parse(signature, handler);
-}
-#endif /* !CONFIG_SFI */
-
-#endif /*_LINUX_SFI_ACPI_H*/
@@ -74,7 +74,6 @@
#include <linux/kgdb.h>
#include <linux/ftrace.h>
#include <linux/async.h>
-#include <linux/sfi.h>
#include <linux/shmem_fs.h>
#include <linux/slab.h>
#include <linux/perf_event.h>
@@ -1054,7 +1053,6 @@ asmlinkage __visible void __init __no_sanitize_address start_kernel(void)
acpi_subsystem_init();
arch_post_acpi_subsys_init();
- sfi_init_late();
kcsan_init();
/* Do the rest non-__init'ed, we're now alive */