@@ -641,14 +641,14 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x8c10, quirk_apple_mbp_poweroff);
* ID, the AER driver should traverse the child device tree, reading
* AER registers to find the faulting device.
*/
-static void quirk_no_aersid(struct pci_dev *pdev)
+static void quirk_no_aer_sid(struct pci_dev *pdev)
{
/* VMD Domain */
if (is_vmd(pdev->bus) && pci_is_root_bus(pdev->bus))
- pdev->bus->bus_flags |= PCI_BUS_FLAGS_NO_AERSID;
+ pdev->bus->no_aer_sid = 1;
}
DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, PCI_ANY_ID,
- PCI_CLASS_BRIDGE_PCI, 8, quirk_no_aersid);
+ PCI_CLASS_BRIDGE_PCI, 8, quirk_no_aer_sid);
static void quirk_intel_th_dnv(struct pci_dev *dev)
{
@@ -899,13 +899,13 @@ static int pci_msi_supported(struct pci_dev *dev, int nvec)
/*
* Any bridge which does NOT route MSI transactions from its
- * secondary bus to its primary bus must set NO_MSI flag on
- * the secondary pci_bus.
+ * secondary bus to its primary bus must enable "no_msi" on
+ * the secondary bus (pci_bus).
* We expect only arch-specific PCI host bus controller driver
- * or quirks for specific PCI bridges to be setting NO_MSI.
+ * or quirks for specific PCI bridges to enable "no_msi".
*/
for (bus = dev->bus; bus; bus = bus->parent)
- if (bus->bus_flags & PCI_BUS_FLAGS_NO_MSI)
+ if (bus->no_msi)
return 0;
return 1;
@@ -366,9 +366,7 @@ static ssize_t msi_bus_show(struct device *dev, struct device_attribute *attr,
struct pci_dev *pdev = to_pci_dev(dev);
struct pci_bus *subordinate = pdev->subordinate;
- return sprintf(buf, "%u\n", subordinate ?
- !(subordinate->bus_flags & PCI_BUS_FLAGS_NO_MSI)
- : !pdev->no_msi);
+ return sprintf(buf, "%u\n", subordinate ? !subordinate->no_msi : !pdev->no_msi);
}
static ssize_t msi_bus_store(struct device *dev, struct device_attribute *attr,
@@ -385,9 +383,9 @@ static ssize_t msi_bus_store(struct device *dev, struct device_attribute *attr,
return -EPERM;
/*
- * "no_msi" and "bus_flags" only affect what happens when a driver
- * requests MSI or MSI-X. They don't affect any drivers that have
- * already requested MSI or MSI-X.
+ * "no_msi" enabled for device and bus only affect what happens
+ * when a driver requests MSI or MSI-X. They don't affect any
+ * drivers that have already requested MSI or MSI-X.
*/
if (!subordinate) {
pdev->no_msi = !val;
@@ -397,9 +395,9 @@ static ssize_t msi_bus_store(struct device *dev, struct device_attribute *attr,
}
if (val)
- subordinate->bus_flags &= ~PCI_BUS_FLAGS_NO_MSI;
+ subordinate->no_msi = 0;
else
- subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI;
+ subordinate->no_msi = 1;
dev_info(&subordinate->dev, "MSI/MSI-X %s for future drivers of devices on this bus\n",
val ? "allowed" : "disallowed");
@@ -5694,7 +5694,7 @@ int pcix_set_mmrbc(struct pci_dev *dev, int mmrbc)
o = (cmd & PCI_X_CMD_MAX_READ) >> 2;
if (o != v) {
- if (v > o && (dev->bus->bus_flags & PCI_BUS_FLAGS_NO_MMRBC))
+ if (v > o && dev->bus->no_mmrbc)
return -EIO;
cmd &= ~PCI_X_CMD_MAX_READ;
@@ -829,8 +829,7 @@ static bool is_error_source(struct pci_dev *dev, struct aer_err_info *e_info)
* When bus id is equal to 0, it might be a bad id
* reported by root port.
*/
- if ((PCI_BUS_NUM(e_info->id) != 0) &&
- !(dev->bus->bus_flags & PCI_BUS_FLAGS_NO_AERSID)) {
+ if (PCI_BUS_NUM(e_info->id) != 0 && !dev->bus->no_aer_sid) {
/* Device ID match? */
if (e_info->id == ((dev->bus->number << 8) | dev->devfn))
return true;
@@ -844,7 +843,7 @@ static bool is_error_source(struct pci_dev *dev, struct aer_err_info *e_info)
* When either
* 1) bus id is equal to 0. Some ports might lose the bus
* id of error source id;
- * 2) bus flag PCI_BUS_FLAGS_NO_AERSID is set
+ * 2) bus has "no_aer_sid" enabled
* 3) There are multiple errors and prior ID comparing fails;
* We check AER status registers to find possible reporter.
*/
@@ -1009,7 +1009,7 @@ static bool pci_bridge_child_ext_cfg_accessible(struct pci_dev *bridge)
* If extended config space isn't accessible on a bridge's primary
* bus, we certainly can't access it on the secondary bus.
*/
- if (bridge->bus->bus_flags & PCI_BUS_FLAGS_NO_EXTCFG)
+ if (bridge->bus->no_ext_cfg)
return false;
/*
@@ -1055,7 +1055,12 @@ static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
child->parent = parent;
child->msi = parent->msi;
child->sysdata = parent->sysdata;
- child->bus_flags = parent->bus_flags;
+
+ /* PCI bus flags */
+ child->no_msi = parent->no_msi;
+ child->no_mmrbc = parent->no_mmrbc;
+ child->no_aer_sid = parent->no_aer_sid;
+ child->no_ext_cfg = parent->no_ext_cfg;
host = pci_find_host_bridge(parent);
if (host->child_ops)
@@ -1092,7 +1097,7 @@ static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent,
* the root bus.
*/
if (!pci_bridge_child_ext_cfg_accessible(bridge)) {
- child->bus_flags |= PCI_BUS_FLAGS_NO_EXTCFG;
+ child->no_ext_cfg = 1;
pci_info(child, "extended config space not accessible\n");
}
@@ -1657,7 +1662,7 @@ int pci_cfg_space_size(struct pci_dev *dev)
return PCI_CFG_SPACE_EXP_SIZE;
#endif
- if (dev->bus->bus_flags & PCI_BUS_FLAGS_NO_EXTCFG)
+ if (dev->bus->no_ext_cfg)
return PCI_CFG_SPACE_SIZE;
class = dev->class >> 8;
@@ -1052,7 +1052,7 @@ static void quirk_amd_8131_mmrbc(struct pci_dev *dev)
if (dev->subordinate && dev->revision <= 0x12) {
pci_info(dev, "AMD8131 rev %x detected; disabling PCI-X MMRBC\n",
dev->revision);
- dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MMRBC;
+ dev->subordinate->no_mmrbc = 1;
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_mmrbc);
@@ -2503,10 +2503,10 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB,
#ifdef CONFIG_PCI_MSI
/*
- * Some chipsets do not support MSI. We cannot easily rely on setting
- * PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually some
- * other buses controlled by the chipset even if Linux is not aware of it.
- * Instead of setting the flag on all buses in the machine, simply disable
+ * Some chipsets do not support MSI. We cannot easily rely on enabling
+ * "no_msi" for its bus because there are actually some other buses
+ * controlled by the chipset even if Linux is not aware of it. Instead
+ * of enabling "no_msi" on all buses in the machine, simply disable
* MSI globally.
*/
static void quirk_disable_all_msi(struct pci_dev *dev)
@@ -2529,7 +2529,7 @@ static void quirk_disable_msi(struct pci_dev *dev)
{
if (dev->subordinate) {
pci_warn(dev, "MSI quirk detected; subordinate MSI disabled\n");
- dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI;
+ dev->subordinate->no_msi = 1;
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_msi);
@@ -2587,7 +2587,7 @@ static void quirk_msi_ht_cap(struct pci_dev *dev)
{
if (dev->subordinate && !msi_ht_cap_enabled(dev)) {
pci_warn(dev, "MSI quirk detected; subordinate MSI disabled\n");
- dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI;
+ dev->subordinate->no_msi = 1;
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE,
@@ -2613,7 +2613,7 @@ static void quirk_nvidia_ck804_msi_ht_cap(struct pci_dev *dev)
return;
if (!msi_ht_cap_enabled(dev) && !msi_ht_cap_enabled(pdev)) {
pci_warn(dev, "MSI quirk detected; subordinate MSI disabled\n");
- dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI;
+ dev->subordinate->no_msi = 1;
}
pci_dev_put(pdev);
}
@@ -234,14 +234,6 @@ enum pci_irq_reroute_variant {
MAX_IRQ_REROUTE_VARIANTS = 3
};
-typedef unsigned short __bitwise pci_bus_flags_t;
-enum pci_bus_flags {
- PCI_BUS_FLAGS_NO_MSI = (__force pci_bus_flags_t) 1,
- PCI_BUS_FLAGS_NO_MMRBC = (__force pci_bus_flags_t) 2,
- PCI_BUS_FLAGS_NO_AERSID = (__force pci_bus_flags_t) 4,
- PCI_BUS_FLAGS_NO_EXTCFG = (__force pci_bus_flags_t) 8,
-};
-
/* Values from Link Status register, PCIe r3.1, sec 7.8.8 */
enum pcie_link_width {
PCIE_LNK_WIDTH_RESRV = 0x00,
@@ -636,12 +628,20 @@ struct pci_bus {
char name[48];
unsigned short bridge_ctl; /* Manage NO_ISA/FBB/et al behaviors */
- pci_bus_flags_t bus_flags; /* Inherited by child buses */
struct device *bridge;
struct device dev;
struct bin_attribute *legacy_io; /* Legacy I/O for this bus */
struct bin_attribute *legacy_mem; /* Legacy mem */
- unsigned int is_added:1;
+ unsigned int is_added:1; /* This bus has already been registered */
+
+ /* PCI bus flags are inherited by child buses */
+ unsigned int no_msi:1; /* Don't use MSI/MSI-X for devices behind a bridge that does not route
+ MSI transactions from its secondary bus to its primary bus */
+ unsigned int no_mmrbc:1; /* Disallow setting PCI-X Maximum Memory Read Byte Count on this bus */
+ unsigned int no_aer_sid:1; /* Allow Root Port buses to skip the AER source ID matching when finding
+ the faulting device */
+ unsigned int no_ext_cfg:1; /* Don't use PCIe/PCI-X Mode 2 Extended Configuration Space
+ when it isn't available on bridge's primary bus */
};
#define to_pci_bus(n) container_of(n, struct pci_bus, dev)
All the flags defined in the enum pci_bus_flags are used to determine whether a particular feature of a PCI bus is available or not - features are also often disabled via architecture or device-specific quirk. These flags are tightly coupled with a PCI buses and PCI bridges and primarily used in simple binary on/off manner to check whether something is enabled or disabled, and have almost no other users (with an exception of the x86 architecture-specific quirk) outside of the PCI device drivers space. Therefore, convert enum pci_bus_flags into a set of bit fields in the struct pci_bus, and then drop said enum and the typedef pci_bus_flags_t. This will keep PCI device-specific features as part of the struct pci_dev and make the code that used to use flags simpler. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Krzysztof Wilczyński <kw@linux.com> --- Changes in v2: Rebased against kernel 5.11. arch/x86/pci/fixup.c | 6 +++--- drivers/pci/msi.c | 8 ++++---- drivers/pci/pci-sysfs.c | 14 ++++++-------- drivers/pci/pci.c | 2 +- drivers/pci/pcie/aer.c | 5 ++--- drivers/pci/probe.c | 13 +++++++++---- drivers/pci/quirks.c | 16 ++++++++-------- include/linux/pci.h | 20 ++++++++++---------- 8 files changed, 43 insertions(+), 41 deletions(-)