diff mbox series

[3/3,RESEND] PCI: controller: avoid building empty drivers

Message ID 20210308152501.2135937-3-arnd@kernel.org (mailing list archive)
State Accepted
Commit 12f6db15c40e6b0f846120f1f9548d278f12f370
Headers show
Series [1/3] PCI: controller: al: select CONFIG_PCI_ECAM | expand

Commit Message

Arnd Bergmann March 8, 2021, 3:24 p.m. UTC 
From: Arnd Bergmann <arnd@arndb.de>

There are harmless warnings when compile testing the kernel with
CONFIG_TRIM_UNUSED_KSYMS:

drivers/pci/controller/dwc/pcie-al.o: no symbols
drivers/pci/controller/pci-thunder-ecam.o: no symbols
drivers/pci/controller/pci-thunder-pem.o: no symbols

The problem here is that the host drivers get built even when the
configuration symbols are all disabled, as they pretend to not be drivers
but are silently enabled because of the promise that ACPI based systems
need no drivers.

Add back the normal symbols to have these drivers built, and change the
logic to otherwise only build them when both CONFIG_PCI_QUIRKS and
CONFIG_ACPI are enabled.

As a side-effect, this enables compile-testing the drivers on other
architectures, which in turn needs the acpi_get_rc_resources()
function to be defined.

Reviewed-by: Robert Richter <rric@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 drivers/pci/controller/Makefile     | 7 ++++++-
 drivers/pci/controller/dwc/Makefile | 7 ++++++-
 2 files changed, 12 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile
index e4559f2182f2..6d24a163033f 100644
--- a/drivers/pci/controller/Makefile
+++ b/drivers/pci/controller/Makefile
@@ -11,10 +11,13 @@  obj-$(CONFIG_PCIE_RCAR_HOST) += pcie-rcar.o pcie-rcar-host.o
 obj-$(CONFIG_PCIE_RCAR_EP) += pcie-rcar.o pcie-rcar-ep.o
 obj-$(CONFIG_PCI_HOST_COMMON) += pci-host-common.o
 obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o
+obj-$(CONFIG_PCI_HOST_THUNDER_ECAM) += pci-thunder-ecam.o
+obj-$(CONFIG_PCI_HOST_THUNDER_PEM) += pci-thunder-pem.o
 obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o
 obj-$(CONFIG_PCIE_XILINX_NWL) += pcie-xilinx-nwl.o
 obj-$(CONFIG_PCIE_XILINX_CPM) += pcie-xilinx-cpm.o
 obj-$(CONFIG_PCI_V3_SEMI) += pci-v3-semi.o
+obj-$(CONFIG_PCI_XGENE) += pci-xgene.o
 obj-$(CONFIG_PCI_XGENE_MSI) += pci-xgene-msi.o
 obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o
 obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o
@@ -47,8 +50,10 @@  obj-y				+= mobiveil/
 # ARM64 and use internal ifdefs to only build the pieces we need
 # depending on whether ACPI, the DT driver, or both are enabled.
 
-ifdef CONFIG_PCI
+ifdef CONFIG_ACPI
+ifdef CONFIG_PCI_QUIRKS
 obj-$(CONFIG_ARM64) += pci-thunder-ecam.o
 obj-$(CONFIG_ARM64) += pci-thunder-pem.o
 obj-$(CONFIG_ARM64) += pci-xgene.o
 endif
+endif
diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
index a751553fa0db..ba7c42f6df6f 100644
--- a/drivers/pci/controller/dwc/Makefile
+++ b/drivers/pci/controller/dwc/Makefile
@@ -31,7 +31,12 @@  obj-$(CONFIG_PCIE_UNIPHIER_EP) += pcie-uniphier-ep.o
 # ARM64 and use internal ifdefs to only build the pieces we need
 # depending on whether ACPI, the DT driver, or both are enabled.
 
-ifdef CONFIG_PCI
+obj-$(CONFIG_PCIE_AL) += pcie-al.o
+obj-$(CONFIG_PCI_HISI) += pcie-hisi.o
+
+ifdef CONFIG_ACPI
+ifdef CONFIG_PCI_QUIRKS
 obj-$(CONFIG_ARM64) += pcie-al.o
 obj-$(CONFIG_ARM64) += pcie-hisi.o
 endif
+endif