@@ -116,16 +116,16 @@ static struct hw_pci n2100_pci __initdata = {
};
/*
- * Both r8169 chips on the n2100 exhibit PCI parity problems. Set
- * the ->broken_parity_status flag for both ports so that the r8169
- * driver knows it should ignore error interrupts.
+ * Both r8169 chips on the n2100 exhibit PCI parity problems. Turn
+ * off parity reporting for both ports so we don't get error interrupts
+ * for them.
*/
static void n2100_fixup_r8169(struct pci_dev *dev)
{
if (dev->bus->number == 0 &&
(dev->devfn == PCI_DEVFN(1, 0) ||
dev->devfn == PCI_DEVFN(2, 0)))
- dev->broken_parity_status = 1;
+ pci_disable_parity(dev);
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_REALTEK, PCI_ANY_ID, n2100_fixup_r8169);
@@ -4358,20 +4358,6 @@ static void rtl8169_pcierr_interrupt(struct net_device *dev)
if (net_ratelimit())
netdev_err(dev, "PCI error (cmd = 0x%04x, status_errs = 0x%04x)\n",
pci_cmd, pci_status_errs);
- /*
- * The recovery sequence below admits a very elaborated explanation:
- * - it seems to work;
- * - I did not see what else could be done;
- * - it makes iop3xx happy.
- *
- * Feel free to adjust to your needs.
- */
- if (pdev->broken_parity_status)
- pci_cmd &= ~PCI_COMMAND_PARITY;
- else
- pci_cmd |= PCI_COMMAND_SERR | PCI_COMMAND_PARITY;
-
- pci_write_config_word(pdev, PCI_COMMAND, pci_cmd);
rtl_schedule_task(tp, RTL_FLAG_TASK_RESET_PENDING);
}
From: Heiner Kallweit <hkallweit1@gmail.com> On the N2100, instead of just marking the r8169 chips as having broken_parity_status, disable parity error reporting for them entirely. This was the only relevant place that set broken_parity_status, so we no longer need to check for it in the r8169 error interrupt handler. [bhelgaas: squash into one patch, commit log] Link: https://lore.kernel.org/r/0c0dcbf2-5f1e-954c-ebd7-e6ccfae5c60e@gmail.com Link: https://lore.kernel.org/r/9e312679-a684-e9c7-2656-420723706451@gmail.com --- arch/arm/mach-iop32x/n2100.c | 8 ++++---- drivers/net/ethernet/realtek/r8169_main.c | 14 -------------- 2 files changed, 4 insertions(+), 18 deletions(-)