new file mode 100644
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/intel,ixp4xx-pci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Intel IXP4xx PCI controller
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+description: PCI host controller found in the Intel IXP4xx SoC series.
+
+allOf:
+ - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - intel,ixp42x-pci
+ - intel,ixp43x-pci
+ description: The two supported variants are ixp42x and ixp43x,
+ though more variants may exist.
+
+ reg:
+ items:
+ - description: IXP4xx-specific registers
+
+ interrupts:
+ items:
+ - description: Main PCI interrupt
+ - description: PCI DMA interrupt 1
+ - description: PCI DMA interrupt 2
+
+ ranges:
+ maxItems: 2
+ description: Typically one memory range of 64MB and one IO
+ space range of 64KB.
+
+ dma-ranges:
+ maxItems: 1
+ description: The DMA range tells the PCI host which addresses
+ the RAM is at. It can map only 64MB so if the RAM is bigger
+ than 64MB the DMA access has to be restricted to these
+ addresses.
+
+ "#interrupt-cells": true
+
+ interrupt-map: true
+
+ interrupt-map-mask:
+ items:
+ - const: 0xf800
+ - const: 0
+ - const: 0
+ - const: 7
+
+required:
+ - compatible
+ - reg
+ - ranges
+ - dma-ranges
+ - "#interrupt-cells"
+ - interrupt-map
+ - interrupt-map-mask
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ pci@c0000000 {
+ compatible = "intel,ixp43x-pci";
+ reg = <0xc0000000 0x1000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ bus-range = <0x00 0xff>;
+ status = "disabled";
+
+ ranges =
+ <0x02000000 0 0x48000000 0x48000000 0 0x04000000>,
+ <0x01000000 0 0x00000000 0x4c000000 0 0x00010000>;
+ dma-ranges =
+ <0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map =
+ <0x0800 0 0 1 &gpio0 11 3>, /* INT A on slot 1 is irq 11 */
+ <0x0800 0 0 2 &gpio0 10 3>, /* INT B on slot 1 is irq 10 */
+ <0x0800 0 0 3 &gpio0 9 3>, /* INT C on slot 1 is irq 9 */
+ <0x0800 0 0 4 &gpio0 8 3>, /* INT D on slot 1 is irq 8 */
+ <0x1000 0 0 1 &gpio0 10 3>, /* INT A on slot 2 is irq 10 */
+ <0x1000 0 0 2 &gpio0 9 3>, /* INT B on slot 2 is irq 9 */
+ <0x1000 0 0 3 &gpio0 8 3>, /* INT C on slot 2 is irq 8 */
+ <0x1000 0 0 4 &gpio0 11 3>, /* INT D on slot 2 is irq 11 */
+ <0x1800 0 0 1 &gpio0 9 3>, /* INT A on slot 3 is irq 9 */
+ <0x1800 0 0 2 &gpio0 8 3>, /* INT B on slot 3 is irq 8 */
+ <0x1800 0 0 3 &gpio0 11 3>, /* INT C on slot 3 is irq 11 */
+ <0x1800 0 0 4 &gpio0 10 3>; /* INT D on slot 3 is irq 10 */
+ };
This adds device tree bindings for the Intel IXP4xx PCI controller which can be used as both host and option. Cc: devicetree@vger.kernel.org Cc: Arnd Bergmann <arnd@arndb.de> Cc: Imre Kaloz <kaloz@openwrt.org> Cc: Krzysztof Halasa <khalasa@piap.pl> Cc: Zoltan HERPAI <wigyori@uid0.hu> Cc: Raylynn Knight <rayknight@me.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- ChangeLog v1->v2: - Add the three controller interrupts to the binding. PCI maintainers: mainly looking for a review and ACK (if you care about DT bindings) the patch will be merged through ARM SoC. --- .../bindings/pci/intel,ixp4xx-pci.yaml | 102 ++++++++++++++++++ 1 file changed, 102 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/intel,ixp4xx-pci.yaml