diff mbox series

[2/2] arm64: apple: Add PCIe node

Message ID 20210516211851.74921-3-mark.kettenis@xs4all.nl (mailing list archive)
State Superseded
Headers show
Series Apple M1 PCIe DT bindings | expand

Commit Message

Mark Kettenis May 16, 2021, 9:18 p.m. UTC 
From: Mark Kettenis <kettenis@openbsd.org>

Add node corresponding to the apcie,t8103 node in the
Apple device tree for the Mac mini (M1, 2020).

Clock references and DART (IOMMU) references are left out at the
moment and will be added once the appropriate bindings have been
settled upon.

Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
---
 arch/arm64/boot/dts/apple/t8103.dtsi | 64 ++++++++++++++++++++++++++++
 1 file changed, 64 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/apple/t8103.dtsi b/arch/arm64/boot/dts/apple/t8103.dtsi
index 503a76fc30e6..102947935d63 100644
--- a/arch/arm64/boot/dts/apple/t8103.dtsi
+++ b/arch/arm64/boot/dts/apple/t8103.dtsi
@@ -214,5 +214,69 @@  pinctrl_smc: pinctrl@23e820000 {
 				     <AIC_IRQ 396 IRQ_TYPE_LEVEL_HIGH>,
 				     <AIC_IRQ 397 IRQ_TYPE_LEVEL_HIGH>;
 		};
+
+		pcie0: pcie@690000000 {
+			compatible = "apple,t8103-pcie", "apple,pcie";
+			device_type = "pci";
+
+			reg = <0x6 0x90000000 0x0 0x1000000>,
+			      <0x6 0x80000000 0x0 0x4000>,
+			      <0x6 0x8c000000 0x0 0x4000>,
+			      <0x6 0x81000000 0x0 0x8000>,
+			      <0x6 0x82000000 0x0 0x8000>,
+			      <0x6 0x83000000 0x0 0x8000>;
+			reg-names = "ecam", "rc", "phy", "port0", "port1", "port2";
+
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 698 IRQ_TYPE_LEVEL_HIGH>,
+				     <AIC_IRQ 701 IRQ_TYPE_LEVEL_HIGH>;
+
+			msi-controller;
+			msi-parent = <&pcie0>;
+			msi-ranges = <704 32>;
+
+			bus-range = <0 7>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x43000000 0x6 0xa0000000 0x6 0xa0000000 0x0 0x20000000>,
+				 <0x02000000 0x0 0xc0000000 0x6 0xc0000000 0x0 0x40000000>;
+
+			pinctrl-0 = <&pcie_pins>;
+			pinctrl-names = "default";
+
+			pci@0,0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				reset-gpios = <&pinctrl_ap 152 0>;
+				max-link-speed = <2>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+
+			pci@1,0 {
+				device_type = "pci";
+				reg = <0x800 0x0 0x0 0x0 0x0>;
+				reset-gpios = <&pinctrl_ap 153 0>;
+				max-link-speed = <2>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+
+			pci@2,0 {
+				device_type = "pci";
+				reg = <0x1000 0x0 0x0 0x0 0x0>;
+				reset-gpios = <&pinctrl_ap 33 0>;
+				max-link-speed = <1>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
 	};
 };