@@ -66,9 +66,6 @@ struct pcie_link_state {
u32 clkpm_default:1; /* Default Clock PM state by BIOS */
u32 clkpm_disable:1; /* Clock PM disabled */
- /* Exit latencies */
- struct aspm_latency latency_up; /* Upstream direction exit latency */
- struct aspm_latency latency_dw; /* Downstream direction exit latency */
/*
* Endpoint acceptable latencies. A pcie downstream port only
* has one slot under it, so at most there are 8 functions.
@@ -378,7 +375,8 @@ static void encode_l12_threshold(u32 threshold_us, u32 *scale, u32 *value)
static void pcie_aspm_check_latency(struct pci_dev *endpoint)
{
- u32 latency, l1_switch_latency = 0;
+ u32 latency, lnkcap_up, lnkcap_dw, l1_switch_latency = 0;
+ struct aspm_latency latency_up, latency_dw;
struct aspm_latency *acceptable;
struct pcie_link_state *link;
@@ -391,14 +389,22 @@ static void pcie_aspm_check_latency(struct pci_dev *endpoint)
acceptable = &link->acceptable[PCI_FUNC(endpoint->devfn)];
while (link) {
+ /* Read direction exit latencies */
+ pcie_capability_read_dword(link->pdev, PCI_EXP_LNKCAP, &lnkcap_up);
+ pcie_capability_read_dword(link->downstream, PCI_EXP_LNKCAP, &lnkcap_dw);
+ latency_up.l0s = calc_l0s_latency(lnkcap_up);
+ latency_up.l1 = calc_l1_latency(lnkcap_up);
+ latency_dw.l0s = calc_l0s_latency(lnkcap_dw);
+ latency_dw.l1 = calc_l1_latency(lnkcap_dw);
+
/* Check upstream direction L0s latency */
if ((link->aspm_capable & ASPM_STATE_L0S_UP) &&
- (link->latency_up.l0s > acceptable->l0s))
+ (latency_up.l0s > acceptable->l0s))
link->aspm_capable &= ~ASPM_STATE_L0S_UP;
/* Check downstream direction L0s latency */
if ((link->aspm_capable & ASPM_STATE_L0S_DW) &&
- (link->latency_dw.l0s > acceptable->l0s))
+ (latency_dw.l0s > acceptable->l0s))
link->aspm_capable &= ~ASPM_STATE_L0S_DW;
/*
* Check L1 latency.
@@ -413,7 +419,7 @@ static void pcie_aspm_check_latency(struct pci_dev *endpoint)
* L1 exit latencies advertised by a device include L1
* substate latencies (and hence do not do any check).
*/
- latency = max_t(u32, link->latency_up.l1, link->latency_dw.l1);
+ latency = max_t(u32, latency_up.l1, latency_dw.l1);
if ((link->aspm_capable & ASPM_STATE_L1) &&
(latency + l1_switch_latency > acceptable->l1))
link->aspm_capable &= ~ASPM_STATE_L1;
@@ -593,8 +599,6 @@ static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist)
link->aspm_enabled |= ASPM_STATE_L0S_UP;
if (parent_lnkctl & PCI_EXP_LNKCTL_ASPM_L0S)
link->aspm_enabled |= ASPM_STATE_L0S_DW;
- link->latency_up.l0s = calc_l0s_latency(parent_lnkcap);
- link->latency_dw.l0s = calc_l0s_latency(child_lnkcap);
/* Setup L1 state */
if (parent_lnkcap & child_lnkcap & PCI_EXP_LNKCAP_ASPM_L1)
@@ -602,8 +606,6 @@ static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist)
if (parent_lnkctl & child_lnkctl & PCI_EXP_LNKCTL_ASPM_L1)
link->aspm_enabled |= ASPM_STATE_L1;
- link->latency_up.l1 = calc_l1_latency(parent_lnkcap);
- link->latency_dw.l1 = calc_l1_latency(child_lnkcap);
/* Setup L1 substate */
pci_read_config_dword(parent, parent->l1ss + PCI_L1SS_CAP,
Inside pcie_aspm_cap_init() the exit latencies on both upstream and downstream are calculated and cached in struct pcie_link_state.latency_* These values are only used in pcie_aspm_check_latency() where they are compared with the acceptable latencies on the link. Computing these latencies right inside pcie_aspm_check_latency() where they are only needed will remove the need for caching them. This will not make any functional change. - Calculate the exit latencies inside pcie_aspm_check_latency() - Remove struct pcie_link_state.latency_{up,dw} - Replace references with local variables of struct aspm_latency Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com> --- drivers/pci/pcie/aspm.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-)