[v2,10/13] PCI: aardvark: Simplify initialization of rootcap on virtual bridge

Commit Message

Marek Behún Oct. 5, 2021, 6:09 p.m. UTC

From: Pali Rohár <[e-mail]>

PCIe config space can be initialized also before pci_bridge_emul_init()
call, so move rootcap initialization after PCI config space initialization.

This simplifies the function a little since it removes one if (ret < 0)
check.

Signed-off-by: Pali Rohár <[e-mail]>
Reviewed-by: Marek Behún <[e-mail]>
Signed-off-by: Marek Behún <[e-mail]>
---
 drivers/pci/controller/pci-aardvark.c | 14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)

Patch

diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index efe8b5f7bf8c..9c509d5a9afa 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -822,7 +822,6 @@  static struct pci_bridge_emul_ops advk_pci_bridge_emul_ops = {
 static int advk_sw_pci_bridge_init(struct advk_pcie *pcie)
 {
 	struct pci_bridge_emul *bridge = &pcie->bridge;
-	int ret;
 
 	bridge->conf.vendor =
 		cpu_to_le16(advk_readl(pcie, PCIE_CORE_DEV_ID_REG) & 0xffff);
@@ -842,19 +841,14 @@  static int advk_sw_pci_bridge_init(struct advk_pcie *pcie)
 	/* Support interrupt A for MSI feature */
 	bridge->conf.intpin = PCIE_CORE_INT_A_ASSERT_ENABLE;
 
+	/* Indicates supports for Completion Retry Status */
+	bridge->pcie_conf.rootcap = cpu_to_le16(PCI_EXP_RTCAP_CRSVIS);
+
 	bridge->has_pcie = true;
 	bridge->data = pcie;
 	bridge->ops = &advk_pci_bridge_emul_ops;
 
-	/* PCIe config space can be initialized after pci_bridge_emul_init() */
-	ret = pci_bridge_emul_init(bridge, 0);
-	if (ret < 0)
-		return ret;
-
-	/* Indicates supports for Completion Retry Status */
-	bridge->pcie_conf.rootcap = cpu_to_le16(PCI_EXP_RTCAP_CRSVIS);
-
-	return 0;
+	return pci_bridge_emul_init(bridge, 0);
 }
 
 static bool advk_pcie_valid_device(struct advk_pcie *pcie, struct pci_bus *bus,