@@ -99,6 +99,7 @@
#define PCIE_CORE_CTRL2_MSI_ENABLE BIT(10)
#define PCIE_CORE_REF_CLK_REG (CONTROL_BASE_ADDR + 0x14)
#define PCIE_CORE_REF_CLK_TX_ENABLE BIT(1)
+#define PCIE_CORE_REF_CLK_RX_ENABLE BIT(2)
#define PCIE_MSG_LOG_REG (CONTROL_BASE_ADDR + 0x30)
#define PCIE_ISR0_REG (CONTROL_BASE_ADDR + 0x40)
#define PCIE_MSG_PM_PME_MASK BIT(7)
@@ -451,9 +452,15 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie)
u32 reg;
int i;
- /* Enable TX */
+ /*
+ * Configure PCIe Reference clock. Direction is from the PCIe
+ * controller to the endpoint card, so enable transmitting of
+ * Reference clock differential signal off-chip and disable
+ * receiving off-chip differential signal.
+ */
reg = advk_readl(pcie, PCIE_CORE_REF_CLK_REG);
reg |= PCIE_CORE_REF_CLK_TX_ENABLE;
+ reg &= ~PCIE_CORE_REF_CLK_RX_ENABLE;
advk_writel(pcie, reg, PCIE_CORE_REF_CLK_REG);
/* Set to Direct mode */