diff mbox series

[08/17] PCI: aardvark: Enable MSI-X support

Message ID 20211208061851.31867-9-kabel@kernel.org (mailing list archive)
State Superseded
Delegated to: Lorenzo Pieralisi
Headers show
Series PCI: aardvark controller fixes BATCH 4 | expand

Commit Message

Marek Behún Dec. 8, 2021, 6:18 a.m. UTC 
From: Pali Rohár <pali@kernel.org>

According to PCI 3.0 specification, sending both MSI and MSI-X interrupts
is done by DWORD memory write operation to doorbell message address. The
write operation for MSI has zero upper 16 bits and the MSI interrupt number
in the lower 16 bits, while the write operation for MSI-X contains a 32-bit
value from MSI-X table.

Since the driver only uses interrupt numbers from range 0..31, the upper
16 bits of the DWORD memory write operation to doorbell message address
are zero even for MSI-X interrupts. Thus we can enable MSI-X interrupts.

Testing proves that kernel can correctly receive MSI-X interrupts from PCIe
cards which supports both MSI and MSI-X interrupts.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
---
 drivers/pci/controller/pci-aardvark.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index d518cface0a7..24c67dc983e5 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -1360,7 +1360,7 @@  static int advk_pcie_init_msi_irq_domain(struct advk_pcie *pcie)
 
 	msi_di = &pcie->msi_domain_info;
 	msi_di->flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
-		MSI_FLAG_MULTI_PCI_MSI;
+			MSI_FLAG_MULTI_PCI_MSI | MSI_FLAG_PCI_MSIX;
 	msi_di->chip = msi_ic;
 
 	pcie->msi_inner_domain =