| Message ID | 20220107225942.121484-1-kw@linux.com (mailing list archive) |
|---|---|
| State | Accepted |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
| Series | PCI: Correct misspelled words | expand |
On Fri, Jan 07, 2022 at 10:59:42PM +0000, Krzysztof Wilczyński wrote: > Fix a number misspelled words, and while at it, correct two phrases used > to indicate a status of an operation where words used have been cleverly > truncated and thus always trigger a spellchecking error while performing > a static code analysis over the PCI tree. > > Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Applied to pci/misc, thanks! > --- > drivers/pci/controller/cadence/pcie-cadence.h | 2 +- > drivers/pci/controller/pcie-mediatek-gen3.c | 2 +- > drivers/pci/endpoint/functions/pci-epf-ntb.c | 2 +- > drivers/pci/of.c | 2 +- > drivers/pci/quirks.c | 4 ++-- > 5 files changed, 6 insertions(+), 6 deletions(-) > > diff --git a/drivers/pci/controller/cadence/pcie-cadence.h b/drivers/pci/controller/cadence/pcie-cadence.h > index 262421e5d917..c8a27b6290ce 100644 > --- a/drivers/pci/controller/cadence/pcie-cadence.h > +++ b/drivers/pci/controller/cadence/pcie-cadence.h > @@ -310,7 +310,7 @@ struct cdns_pcie { > * single function at a time > * @vendor_id: PCI vendor ID > * @device_id: PCI device ID > - * @avail_ib_bar: Satus of RP_BAR0, RP_BAR1 and RP_NO_BAR if it's free or > + * @avail_ib_bar: Status of RP_BAR0, RP_BAR1 and RP_NO_BAR if it's free or > * available > * @quirk_retrain_flag: Retrain link as quirk for PCIe Gen2 > * @quirk_detect_quiet_flag: LTSSM Detect Quiet min delay set as quirk > diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c > index 17c59b0d6978..7de82da0bd6d 100644 > --- a/drivers/pci/controller/pcie-mediatek-gen3.c > +++ b/drivers/pci/controller/pcie-mediatek-gen3.c > @@ -303,7 +303,7 @@ static int mtk_pcie_startup_port(struct mtk_pcie_port *port) > writel_relaxed(val, port->base + PCIE_RST_CTRL_REG); > > /* > - * Described in PCIe CEM specification setctions 2.2 (PERST# Signal) > + * Described in PCIe CEM specification sections 2.2 (PERST# Signal) > * and 2.2.1 (Initial Power-Up (G3 to S0)). > * The deassertion of PERST# should be delayed 100ms (TPVPERL) > * for the power and clock to become stable. > diff --git a/drivers/pci/endpoint/functions/pci-epf-ntb.c b/drivers/pci/endpoint/functions/pci-epf-ntb.c > index 5a03401f4571..9a00448c7e61 100644 > --- a/drivers/pci/endpoint/functions/pci-epf-ntb.c > +++ b/drivers/pci/endpoint/functions/pci-epf-ntb.c > @@ -1262,7 +1262,7 @@ static void epf_ntb_db_mw_bar_cleanup(struct epf_ntb *ntb, > } > > /** > - * epf_ntb_configure_interrupt() - Configure MSI/MSI-X capaiblity > + * epf_ntb_configure_interrupt() - Configure MSI/MSI-X capability > * @ntb: NTB device that facilitates communication between HOST1 and HOST2 > * @type: PRIMARY interface or SECONDARY interface > * > diff --git a/drivers/pci/of.c b/drivers/pci/of.c > index 0b1237cff239..cb2e8351c2cc 100644 > --- a/drivers/pci/of.c > +++ b/drivers/pci/of.c > @@ -247,7 +247,7 @@ void of_pci_check_probe_only(void) > else > pci_clear_flags(PCI_PROBE_ONLY); > > - pr_info("PROBE_ONLY %sabled\n", val ? "en" : "dis"); > + pr_info("PROBE_ONLY %s\n", val ? "enabled" : "disabled"); > } > EXPORT_SYMBOL_GPL(of_pci_check_probe_only); > > diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c > index 003950c738d2..e16bde66e735 100644 > --- a/drivers/pci/quirks.c > +++ b/drivers/pci/quirks.c > @@ -980,8 +980,8 @@ static void quirk_via_ioapic(struct pci_dev *dev) > else > tmp = 0x1f; /* all known bits (4-0) routed to external APIC */ > > - pci_info(dev, "%sbling VIA external APIC routing\n", > - tmp == 0 ? "Disa" : "Ena"); > + pci_info(dev, "%s VIA external APIC routing\n", > + tmp == 0 ? "Disabling" : "Enabling"); > > /* Offset 0x58: External APIC IRQ output control */ > pci_write_config_byte(dev, 0x58, tmp); > -- > 2.34.1 >
diff --git a/drivers/pci/controller/cadence/pcie-cadence.h b/drivers/pci/controller/cadence/pcie-cadence.h index 262421e5d917..c8a27b6290ce 100644 --- a/drivers/pci/controller/cadence/pcie-cadence.h +++ b/drivers/pci/controller/cadence/pcie-cadence.h @@ -310,7 +310,7 @@ struct cdns_pcie { * single function at a time * @vendor_id: PCI vendor ID * @device_id: PCI device ID - * @avail_ib_bar: Satus of RP_BAR0, RP_BAR1 and RP_NO_BAR if it's free or + * @avail_ib_bar: Status of RP_BAR0, RP_BAR1 and RP_NO_BAR if it's free or * available * @quirk_retrain_flag: Retrain link as quirk for PCIe Gen2 * @quirk_detect_quiet_flag: LTSSM Detect Quiet min delay set as quirk diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c index 17c59b0d6978..7de82da0bd6d 100644 --- a/drivers/pci/controller/pcie-mediatek-gen3.c +++ b/drivers/pci/controller/pcie-mediatek-gen3.c @@ -303,7 +303,7 @@ static int mtk_pcie_startup_port(struct mtk_pcie_port *port) writel_relaxed(val, port->base + PCIE_RST_CTRL_REG); /* - * Described in PCIe CEM specification setctions 2.2 (PERST# Signal) + * Described in PCIe CEM specification sections 2.2 (PERST# Signal) * and 2.2.1 (Initial Power-Up (G3 to S0)). * The deassertion of PERST# should be delayed 100ms (TPVPERL) * for the power and clock to become stable. diff --git a/drivers/pci/endpoint/functions/pci-epf-ntb.c b/drivers/pci/endpoint/functions/pci-epf-ntb.c index 5a03401f4571..9a00448c7e61 100644 --- a/drivers/pci/endpoint/functions/pci-epf-ntb.c +++ b/drivers/pci/endpoint/functions/pci-epf-ntb.c @@ -1262,7 +1262,7 @@ static void epf_ntb_db_mw_bar_cleanup(struct epf_ntb *ntb, } /** - * epf_ntb_configure_interrupt() - Configure MSI/MSI-X capaiblity + * epf_ntb_configure_interrupt() - Configure MSI/MSI-X capability * @ntb: NTB device that facilitates communication between HOST1 and HOST2 * @type: PRIMARY interface or SECONDARY interface * diff --git a/drivers/pci/of.c b/drivers/pci/of.c index 0b1237cff239..cb2e8351c2cc 100644 --- a/drivers/pci/of.c +++ b/drivers/pci/of.c @@ -247,7 +247,7 @@ void of_pci_check_probe_only(void) else pci_clear_flags(PCI_PROBE_ONLY); - pr_info("PROBE_ONLY %sabled\n", val ? "en" : "dis"); + pr_info("PROBE_ONLY %s\n", val ? "enabled" : "disabled"); } EXPORT_SYMBOL_GPL(of_pci_check_probe_only); diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 003950c738d2..e16bde66e735 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -980,8 +980,8 @@ static void quirk_via_ioapic(struct pci_dev *dev) else tmp = 0x1f; /* all known bits (4-0) routed to external APIC */ - pci_info(dev, "%sbling VIA external APIC routing\n", - tmp == 0 ? "Disa" : "Ena"); + pci_info(dev, "%s VIA external APIC routing\n", + tmp == 0 ? "Disabling" : "Enabling"); /* Offset 0x58: External APIC IRQ output control */ pci_write_config_byte(dev, 0x58, tmp);
Fix a number misspelled words, and while at it, correct two phrases used to indicate a status of an operation where words used have been cleverly truncated and thus always trigger a spellchecking error while performing a static code analysis over the PCI tree. Signed-off-by: Krzysztof Wilczyński <kw@linux.com> --- drivers/pci/controller/cadence/pcie-cadence.h | 2 +- drivers/pci/controller/pcie-mediatek-gen3.c | 2 +- drivers/pci/endpoint/functions/pci-epf-ntb.c | 2 +- drivers/pci/of.c | 2 +- drivers/pci/quirks.c | 4 ++-- 5 files changed, 6 insertions(+), 6 deletions(-)