diff mbox series

[v2,12/23] PCI: aardvark: Enable MSI-X support

Message ID 20220110015018.26359-13-kabel@kernel.org (mailing list archive)
State Accepted
Delegated to: Lorenzo Pieralisi
Headers show
Series PCI: aardvark controller fixes BATCH 4 | expand

Commit Message

Marek Behún Jan. 10, 2022, 1:50 a.m. UTC 
From: Pali Rohár <pali@kernel.org>

According to PCI 3.0 specification, sending both MSI and MSI-X interrupts
is done by DWORD memory write operation to doorbell message address. The
write operation for MSI has zero upper 16 bits and the MSI interrupt number
in the lower 16 bits, while the write operation for MSI-X contains a 32-bit
value from MSI-X table.

Since the driver only uses interrupt numbers from range 0..31, the upper
16 bits of the DWORD memory write operation to doorbell message address
are zero even for MSI-X interrupts. Thus we can enable MSI-X interrupts.

Testing proves that kernel can correctly receive MSI-X interrupts from PCIe
cards which supports both MSI and MSI-X interrupts.

Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
---
 drivers/pci/controller/pci-aardvark.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index 79102704d82f..a892f22510da 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -1344,7 +1344,7 @@  static struct irq_chip advk_msi_irq_chip = {
 
 static struct msi_domain_info advk_msi_domain_info = {
 	.flags	= MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
-		  MSI_FLAG_MULTI_PCI_MSI,
+		  MSI_FLAG_MULTI_PCI_MSI | MSI_FLAG_PCI_MSIX,
 	.chip	= &advk_msi_irq_chip,
 };