@@ -25,11 +25,16 @@
#define FLAG_CFG1 BIT(1)
#define FLAG_DEV_FIX BIT(2)
+struct loongson_pci_data {
+ u32 flags;
+ struct pci_ops *ops;
+};
+
struct loongson_pci {
void __iomem *cfg0_base;
void __iomem *cfg1_base;
struct platform_device *pdev;
- u32 flags;
+ struct loongson_pci_data *data;
};
/* Fixup wrong class code in PCIe bridges */
@@ -126,8 +131,8 @@ static void __iomem *pci_loongson_map_bus(struct pci_bus *bus, unsigned int devf
* Do not read more than one device on the bus other than
* the host bus. For our hardware the root bus is always bus 0.
*/
- if (priv->flags & FLAG_DEV_FIX && busnum != 0 &&
- PCI_SLOT(devfn) > 0)
+ if (priv->data->flags & FLAG_DEV_FIX &&
+ !pci_is_root_bus(bus) && PCI_SLOT(devfn) > 0)
return NULL;
/* CFG0 can only access standard space */
@@ -159,20 +164,42 @@ static int loongson_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
return val;
}
-/* H/w only accept 32-bit PCI operations */
+/* LS2K/LS7A accept 8/16/32-bit PCI config operations */
static struct pci_ops loongson_pci_ops = {
+ .map_bus = pci_loongson_map_bus,
+ .read = pci_generic_config_read,
+ .write = pci_generic_config_write,
+};
+
+/* RS780/SR5690 only accept 32-bit PCI config operations */
+static struct pci_ops loongson_pci_ops32 = {
.map_bus = pci_loongson_map_bus,
.read = pci_generic_config_read32,
.write = pci_generic_config_write32,
};
+static const struct loongson_pci_data ls2k_pci_data = {
+ .flags = FLAG_CFG1 | FLAG_DEV_FIX,
+ .ops = &loongson_pci_ops,
+};
+
+static const struct loongson_pci_data ls7a_pci_data = {
+ .flags = FLAG_CFG1 | FLAG_DEV_FIX,
+ .ops = &loongson_pci_ops,
+};
+
+static const struct loongson_pci_data rs780e_pci_data = {
+ .flags = FLAG_CFG0,
+ .ops = &loongson_pci_ops32,
+};
+
static const struct of_device_id loongson_pci_of_match[] = {
{ .compatible = "loongson,ls2k-pci",
- .data = (void *)(FLAG_CFG0 | FLAG_CFG1 | FLAG_DEV_FIX), },
+ .data = &ls2k_pci_data, },
{ .compatible = "loongson,ls7a-pci",
- .data = (void *)(FLAG_CFG0 | FLAG_CFG1 | FLAG_DEV_FIX), },
+ .data = &ls7a_pci_data, },
{ .compatible = "loongson,rs780e-pci",
- .data = (void *)(FLAG_CFG0), },
+ .data = &rs780e_pci_data, },
{}
};
@@ -193,20 +220,20 @@ static int loongson_pci_probe(struct platform_device *pdev)
priv = pci_host_bridge_priv(bridge);
priv->pdev = pdev;
- priv->flags = (unsigned long)of_device_get_match_data(dev);
+ priv->data = (struct loongson_pci_data *)of_device_get_match_data(dev);
- regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!regs) {
- dev_err(dev, "missing mem resources for cfg0\n");
- return -EINVAL;
+ if (priv->data->flags & FLAG_CFG0) {
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!regs)
+ dev_err(dev, "missing mem resources for cfg0\n");
+ else {
+ priv->cfg0_base = devm_pci_remap_cfg_resource(dev, regs);
+ if (IS_ERR(priv->cfg0_base))
+ return PTR_ERR(priv->cfg0_base);
+ }
}
- priv->cfg0_base = devm_pci_remap_cfg_resource(dev, regs);
- if (IS_ERR(priv->cfg0_base))
- return PTR_ERR(priv->cfg0_base);
-
- /* CFG1 is optional */
- if (priv->flags & FLAG_CFG1) {
+ if (priv->data->flags & FLAG_CFG1) {
regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
if (!regs)
dev_info(dev, "missing mem resource for cfg1\n");
@@ -218,7 +245,7 @@ static int loongson_pci_probe(struct platform_device *pdev)
}
bridge->sysdata = priv;
- bridge->ops = &loongson_pci_ops;
+ bridge->ops = priv->data->ops;
bridge->map_irq = loongson_map_irq;
return pci_host_probe(bridge);
LS2K/LS7A support 8/16/32-bits PCI config access operations via CFG1, so we can disable CFG0 for them and safely use pci_generic_config_read()/ pci_generic_config_write() instead of pci_generic_config_read32()/pci_ generic_config_write32(). Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> --- drivers/pci/controller/pci-loongson.c | 65 +++++++++++++++++++-------- 1 file changed, 46 insertions(+), 19 deletions(-)