Message ID | 20220503225104.12108-21-Sergey.Semin@baikalelectronics.ru (mailing list archive) |
---|---|
State | Superseded |
Delegated to: | Lorenzo Pieralisi |
Headers | show |
Series | dmaengine: dw-edma: Add RP/EP local DMA controllers support | expand |
On Wed, May 04, 2022 at 01:50:58AM +0300, Serge Semin wrote: > Instead of splitting the 64-bits IOs up into two 32-bits ones it's > possible to use an available set of the non-atomic readq/writeq methods > implemented exactly for such cases. They are defined in the dedicated > header files io-64-nonatomic-lo-hi.h/io-64-nonatomic-hi-lo.h. So in case > if the 64-bits readq/writeq methods are unavailable on some platforms at > consideration, the corresponding drivers can have any of these headers > included and stop locally re-implementing the 64-bits IO accessors taking > into account the non-atomic nature of the included methods. Let's do that > in the DW eDMA driver too. Note by doing so we can discard the > CONFIG_64BIT config ifdefs from the code. Also note that if a platform > doesn't support 64-bit DBI IOs then the corresponding accessors will just > directly call the lo_hi_readq()/lo_hi_writeq() methods. > > Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Thanks, Mani > --- > drivers/dma/dw-edma/dw-edma-v0-core.c | 71 +++++++++------------------ > 1 file changed, 24 insertions(+), 47 deletions(-) > > diff --git a/drivers/dma/dw-edma/dw-edma-v0-core.c b/drivers/dma/dw-edma/dw-edma-v0-core.c > index e6d611176891..4348d2323125 100644 > --- a/drivers/dma/dw-edma/dw-edma-v0-core.c > +++ b/drivers/dma/dw-edma/dw-edma-v0-core.c > @@ -8,6 +8,8 @@ > > #include <linux/bitfield.h> > > +#include <linux/io-64-nonatomic-lo-hi.h> > + > #include "dw-edma-core.h" > #include "dw-edma-v0-core.h" > #include "dw-edma-v0-regs.h" > @@ -53,8 +55,6 @@ static inline struct dw_edma_v0_regs __iomem *__dw_regs(struct dw_edma *dw) > SET_32(dw, rd_##name, value); \ > } while (0) > > -#ifdef CONFIG_64BIT > - > #define SET_64(dw, name, value) \ > writeq(value, &(__dw_regs(dw)->name)) > > @@ -80,8 +80,6 @@ static inline struct dw_edma_v0_regs __iomem *__dw_regs(struct dw_edma *dw) > SET_64(dw, rd_##name, value); \ > } while (0) > > -#endif /* CONFIG_64BIT */ > - > #define SET_COMPAT(dw, name, value) \ > writel(value, &(__dw_regs(dw)->type.unroll.name)) > > @@ -164,14 +162,13 @@ static inline u32 readl_ch(struct dw_edma *dw, enum dw_edma_dir dir, u16 ch, > #define SET_LL_32(ll, value) \ > writel(value, ll) > > -#ifdef CONFIG_64BIT > - > static inline void writeq_ch(struct dw_edma *dw, enum dw_edma_dir dir, u16 ch, > u64 value, void __iomem *addr) > { > + unsigned long flags; > + > if (dw->chip->mf == EDMA_MF_EDMA_LEGACY) { > u32 viewport_sel; > - unsigned long flags; > > raw_spin_lock_irqsave(&dw->lock, flags); > > @@ -181,22 +178,25 @@ static inline void writeq_ch(struct dw_edma *dw, enum dw_edma_dir dir, u16 ch, > > writel(viewport_sel, > &(__dw_regs(dw)->type.legacy.viewport_sel)); > + } > + > + if (dw->chip->flags & DW_EDMA_CHIP_32BIT_DBI) > + lo_hi_writeq(value, addr); > + else > writeq(value, addr); > > + if (dw->chip->mf == EDMA_MF_EDMA_LEGACY) > raw_spin_unlock_irqrestore(&dw->lock, flags); > - } else { > - writeq(value, addr); > - } > } > > static inline u64 readq_ch(struct dw_edma *dw, enum dw_edma_dir dir, u16 ch, > const void __iomem *addr) > { > - u32 value; > + unsigned long flags; > + u64 value; > > if (dw->chip->mf == EDMA_MF_EDMA_LEGACY) { > u32 viewport_sel; > - unsigned long flags; > > raw_spin_lock_irqsave(&dw->lock, flags); > > @@ -206,12 +206,15 @@ static inline u64 readq_ch(struct dw_edma *dw, enum dw_edma_dir dir, u16 ch, > > writel(viewport_sel, > &(__dw_regs(dw)->type.legacy.viewport_sel)); > + } > + > + if (dw->chip->flags & DW_EDMA_CHIP_32BIT_DBI) > + value = lo_hi_readq(addr); > + else > value = readq(addr); > > + if (dw->chip->mf == EDMA_MF_EDMA_LEGACY) > raw_spin_unlock_irqrestore(&dw->lock, flags); > - } else { > - value = readq(addr); > - } > > return value; > } > @@ -225,8 +228,6 @@ static inline u64 readq_ch(struct dw_edma *dw, enum dw_edma_dir dir, u16 ch, > #define SET_LL_64(ll, value) \ > writeq(value, ll) > > -#endif /* CONFIG_64BIT */ > - > /* eDMA management callbacks */ > void dw_edma_v0_core_off(struct dw_edma *dw) > { > @@ -325,19 +326,10 @@ static void dw_edma_v0_core_write_chunk(struct dw_edma_chunk *chunk) > /* Transfer size */ > SET_LL_32(&lli[i].transfer_size, child->sz); > /* SAR */ > - #ifdef CONFIG_64BIT > - SET_LL_64(&lli[i].sar.reg, child->sar); > - #else /* CONFIG_64BIT */ > - SET_LL_32(&lli[i].sar.lsb, lower_32_bits(child->sar)); > - SET_LL_32(&lli[i].sar.msb, upper_32_bits(child->sar)); > - #endif /* CONFIG_64BIT */ > + SET_LL_64(&lli[i].sar.reg, child->sar); > /* DAR */ > - #ifdef CONFIG_64BIT > - SET_LL_64(&lli[i].dar.reg, child->dar); > - #else /* CONFIG_64BIT */ > - SET_LL_32(&lli[i].dar.lsb, lower_32_bits(child->dar)); > - SET_LL_32(&lli[i].dar.msb, upper_32_bits(child->dar)); > - #endif /* CONFIG_64BIT */ > + SET_LL_64(&lli[i].dar.reg, child->dar); > + > i++; > } > > @@ -349,12 +341,7 @@ static void dw_edma_v0_core_write_chunk(struct dw_edma_chunk *chunk) > /* Channel control */ > SET_LL_32(&llp->control, control); > /* Linked list */ > - #ifdef CONFIG_64BIT > - SET_LL_64(&llp->llp.reg, chunk->ll_region.paddr); > - #else /* CONFIG_64BIT */ > - SET_LL_32(&llp->llp.lsb, lower_32_bits(chunk->ll_region.paddr)); > - SET_LL_32(&llp->llp.msb, upper_32_bits(chunk->ll_region.paddr)); > - #endif /* CONFIG_64BIT */ > + SET_LL_64(&llp->llp.reg, chunk->ll_region.paddr); > } > > void dw_edma_v0_core_start(struct dw_edma_chunk *chunk, bool first) > @@ -417,18 +404,8 @@ void dw_edma_v0_core_start(struct dw_edma_chunk *chunk, bool first) > SET_CH_32(dw, chan->dir, chan->id, ch_control1, > (DW_EDMA_V0_CCS | DW_EDMA_V0_LLE)); > /* Linked list */ > - if ((chan->dw->chip->flags & DW_EDMA_CHIP_32BIT_DBI) || > - !IS_ENABLED(CONFIG_64BIT)) { > - SET_CH_32(dw, chan->dir, chan->id, llp.lsb, > - lower_32_bits(chunk->ll_region.paddr)); > - SET_CH_32(dw, chan->dir, chan->id, llp.msb, > - upper_32_bits(chunk->ll_region.paddr)); > - } else { > - #ifdef CONFIG_64BIT > - SET_CH_64(dw, chan->dir, chan->id, llp.reg, > - chunk->ll_region.paddr); > - #endif > - } > + SET_CH_64(dw, chan->dir, chan->id, llp.reg, > + chunk->ll_region.paddr); > } > /* Doorbell */ > SET_RW_32(dw, chan->dir, doorbell, > -- > 2.35.1 >
diff --git a/drivers/dma/dw-edma/dw-edma-v0-core.c b/drivers/dma/dw-edma/dw-edma-v0-core.c index e6d611176891..4348d2323125 100644 --- a/drivers/dma/dw-edma/dw-edma-v0-core.c +++ b/drivers/dma/dw-edma/dw-edma-v0-core.c @@ -8,6 +8,8 @@ #include <linux/bitfield.h> +#include <linux/io-64-nonatomic-lo-hi.h> + #include "dw-edma-core.h" #include "dw-edma-v0-core.h" #include "dw-edma-v0-regs.h" @@ -53,8 +55,6 @@ static inline struct dw_edma_v0_regs __iomem *__dw_regs(struct dw_edma *dw) SET_32(dw, rd_##name, value); \ } while (0) -#ifdef CONFIG_64BIT - #define SET_64(dw, name, value) \ writeq(value, &(__dw_regs(dw)->name)) @@ -80,8 +80,6 @@ static inline struct dw_edma_v0_regs __iomem *__dw_regs(struct dw_edma *dw) SET_64(dw, rd_##name, value); \ } while (0) -#endif /* CONFIG_64BIT */ - #define SET_COMPAT(dw, name, value) \ writel(value, &(__dw_regs(dw)->type.unroll.name)) @@ -164,14 +162,13 @@ static inline u32 readl_ch(struct dw_edma *dw, enum dw_edma_dir dir, u16 ch, #define SET_LL_32(ll, value) \ writel(value, ll) -#ifdef CONFIG_64BIT - static inline void writeq_ch(struct dw_edma *dw, enum dw_edma_dir dir, u16 ch, u64 value, void __iomem *addr) { + unsigned long flags; + if (dw->chip->mf == EDMA_MF_EDMA_LEGACY) { u32 viewport_sel; - unsigned long flags; raw_spin_lock_irqsave(&dw->lock, flags); @@ -181,22 +178,25 @@ static inline void writeq_ch(struct dw_edma *dw, enum dw_edma_dir dir, u16 ch, writel(viewport_sel, &(__dw_regs(dw)->type.legacy.viewport_sel)); + } + + if (dw->chip->flags & DW_EDMA_CHIP_32BIT_DBI) + lo_hi_writeq(value, addr); + else writeq(value, addr); + if (dw->chip->mf == EDMA_MF_EDMA_LEGACY) raw_spin_unlock_irqrestore(&dw->lock, flags); - } else { - writeq(value, addr); - } } static inline u64 readq_ch(struct dw_edma *dw, enum dw_edma_dir dir, u16 ch, const void __iomem *addr) { - u32 value; + unsigned long flags; + u64 value; if (dw->chip->mf == EDMA_MF_EDMA_LEGACY) { u32 viewport_sel; - unsigned long flags; raw_spin_lock_irqsave(&dw->lock, flags); @@ -206,12 +206,15 @@ static inline u64 readq_ch(struct dw_edma *dw, enum dw_edma_dir dir, u16 ch, writel(viewport_sel, &(__dw_regs(dw)->type.legacy.viewport_sel)); + } + + if (dw->chip->flags & DW_EDMA_CHIP_32BIT_DBI) + value = lo_hi_readq(addr); + else value = readq(addr); + if (dw->chip->mf == EDMA_MF_EDMA_LEGACY) raw_spin_unlock_irqrestore(&dw->lock, flags); - } else { - value = readq(addr); - } return value; } @@ -225,8 +228,6 @@ static inline u64 readq_ch(struct dw_edma *dw, enum dw_edma_dir dir, u16 ch, #define SET_LL_64(ll, value) \ writeq(value, ll) -#endif /* CONFIG_64BIT */ - /* eDMA management callbacks */ void dw_edma_v0_core_off(struct dw_edma *dw) { @@ -325,19 +326,10 @@ static void dw_edma_v0_core_write_chunk(struct dw_edma_chunk *chunk) /* Transfer size */ SET_LL_32(&lli[i].transfer_size, child->sz); /* SAR */ - #ifdef CONFIG_64BIT - SET_LL_64(&lli[i].sar.reg, child->sar); - #else /* CONFIG_64BIT */ - SET_LL_32(&lli[i].sar.lsb, lower_32_bits(child->sar)); - SET_LL_32(&lli[i].sar.msb, upper_32_bits(child->sar)); - #endif /* CONFIG_64BIT */ + SET_LL_64(&lli[i].sar.reg, child->sar); /* DAR */ - #ifdef CONFIG_64BIT - SET_LL_64(&lli[i].dar.reg, child->dar); - #else /* CONFIG_64BIT */ - SET_LL_32(&lli[i].dar.lsb, lower_32_bits(child->dar)); - SET_LL_32(&lli[i].dar.msb, upper_32_bits(child->dar)); - #endif /* CONFIG_64BIT */ + SET_LL_64(&lli[i].dar.reg, child->dar); + i++; } @@ -349,12 +341,7 @@ static void dw_edma_v0_core_write_chunk(struct dw_edma_chunk *chunk) /* Channel control */ SET_LL_32(&llp->control, control); /* Linked list */ - #ifdef CONFIG_64BIT - SET_LL_64(&llp->llp.reg, chunk->ll_region.paddr); - #else /* CONFIG_64BIT */ - SET_LL_32(&llp->llp.lsb, lower_32_bits(chunk->ll_region.paddr)); - SET_LL_32(&llp->llp.msb, upper_32_bits(chunk->ll_region.paddr)); - #endif /* CONFIG_64BIT */ + SET_LL_64(&llp->llp.reg, chunk->ll_region.paddr); } void dw_edma_v0_core_start(struct dw_edma_chunk *chunk, bool first) @@ -417,18 +404,8 @@ void dw_edma_v0_core_start(struct dw_edma_chunk *chunk, bool first) SET_CH_32(dw, chan->dir, chan->id, ch_control1, (DW_EDMA_V0_CCS | DW_EDMA_V0_LLE)); /* Linked list */ - if ((chan->dw->chip->flags & DW_EDMA_CHIP_32BIT_DBI) || - !IS_ENABLED(CONFIG_64BIT)) { - SET_CH_32(dw, chan->dir, chan->id, llp.lsb, - lower_32_bits(chunk->ll_region.paddr)); - SET_CH_32(dw, chan->dir, chan->id, llp.msb, - upper_32_bits(chunk->ll_region.paddr)); - } else { - #ifdef CONFIG_64BIT - SET_CH_64(dw, chan->dir, chan->id, llp.reg, - chunk->ll_region.paddr); - #endif - } + SET_CH_64(dw, chan->dir, chan->id, llp.reg, + chunk->ll_region.paddr); } /* Doorbell */ SET_RW_32(dw, chan->dir, doorbell,
Instead of splitting the 64-bits IOs up into two 32-bits ones it's possible to use an available set of the non-atomic readq/writeq methods implemented exactly for such cases. They are defined in the dedicated header files io-64-nonatomic-lo-hi.h/io-64-nonatomic-hi-lo.h. So in case if the 64-bits readq/writeq methods are unavailable on some platforms at consideration, the corresponding drivers can have any of these headers included and stop locally re-implementing the 64-bits IO accessors taking into account the non-atomic nature of the included methods. Let's do that in the DW eDMA driver too. Note by doing so we can discard the CONFIG_64BIT config ifdefs from the code. Also note that if a platform doesn't support 64-bit DBI IOs then the corresponding accessors will just directly call the lo_hi_readq()/lo_hi_writeq() methods. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> --- drivers/dma/dw-edma/dw-edma-v0-core.c | 71 +++++++++------------------ 1 file changed, 24 insertions(+), 47 deletions(-)