From patchwork Sat May 14 11:59:45 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Frank Wunderlich (linux)" X-Patchwork-Id: 12849760 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 50163C433EF for ; Sat, 14 May 2022 12:00:17 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232141AbiENMAL (ORCPT ); Sat, 14 May 2022 08:00:11 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:49812 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232056AbiENMAE (ORCPT ); Sat, 14 May 2022 08:00:04 -0400 Received: from mxout3.routing.net (mxout3.routing.net [IPv6:2a03:2900:1:a::8]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id BD25B83; Sat, 14 May 2022 05:00:01 -0700 (PDT) Received: from mxbox3.masterlogin.de (unknown [192.168.10.78]) by mxout3.routing.net (Postfix) with ESMTP id B362F6049E; Sat, 14 May 2022 11:59:59 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=mailerdienst.de; s=20200217; t=1652529599; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=Glmetg7VOhUPL0qlQ0pXRU7sW/p0R4UTZM6rOzVK5Ic=; b=uRWvSIF4M6FmsdmXD9PU2XUA8Fku6R03zp55SuQtQlgeEwW+oxKES8tD/dSOByJtss/kcb DiKF72paQQd+bjmnrBqTcSKO1q8aJna233fgBoEpjZHpU5MjL/RnkfReeKnz1lBE2Ntuj3 BTiMxOnHq7gyWSe6eAH6TTqC1A32PvA= Received: from localhost.localdomain (fttx-pool-217.61.148.252.bambit.de [217.61.148.252]) by mxbox3.masterlogin.de (Postfix) with ESMTPSA id B0CAA360696; Sat, 14 May 2022 11:59:58 +0000 (UTC) From: Frank Wunderlich To: linux-rockchip@lists.infradead.org Cc: Frank Wunderlich , Bjorn Helgaas , Rob Herring , Krzysztof Kozlowski , Heiko Stuebner , Kishon Vijay Abraham I , Vinod Koul , Lorenzo Pieralisi , =?utf-8?q?Krzysztof_Wilczy=C5=84ski?= , Philipp Zabel , Johan Jonker , Peter Geis , Michael Riesch , linux-pci@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org Subject: [RFC v3 4/5] arm64: dts: rockchip: rk3568: Add PCIe v3 nodes Date: Sat, 14 May 2022 13:59:45 +0200 Message-Id: <20220514115946.8858-5-linux@fw-web.de> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20220514115946.8858-1-linux@fw-web.de> References: <20220514115946.8858-1-linux@fw-web.de> MIME-Version: 1.0 X-Mail-ID: 4b31d101-afdf-45c9-8480-3aef5d99b3fc Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org From: Frank Wunderlich Add nodes to rk356x devicetree to support PCIe v3. Co-developed-by: Peter Geis Signed-off-by: Frank Wunderlich --- v3: - fix from Peter: change bus-range and msi-map, msi-map needs to start from 0x0 v2: - change to compatible with soc-part - change rockchip,bifurcation to vendor unspecific bifurcation --- arch/arm64/boot/dts/rockchip/rk3568.dtsi | 122 +++++++++++++++++++++++ 1 file changed, 122 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi index 5eafddf62edc..6dbe73c9cddf 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi @@ -42,6 +42,128 @@ qos_sata0: qos@fe190200 { reg = <0x0 0xfe190200 0x0 0x20>; }; + pcie30_phy_grf: syscon@fdcb8000 { + compatible = "rockchip,rk3568-pcie3-phy-grf", "syscon"; + reg = <0x0 0xfdcb8000 0x0 0x10000>; + }; + + pcie30phy: phy@fe8c0000 { + compatible = "rockchip,rk3568-pcie3-phy"; + reg = <0x0 0xfe8c0000 0x0 0x20000>; + #phy-cells = <0>; + clocks = <&pmucru CLK_PCIE30PHY_REF_M>, <&pmucru CLK_PCIE30PHY_REF_N>, + <&cru PCLK_PCIE30PHY>; + clock-names = "refclk_m", "refclk_n", "pclk"; + resets = <&cru SRST_PCIE30PHY>; + reset-names = "phy"; + rockchip,phy-grf = <&pcie30_phy_grf>; + status = "disabled"; + }; + + pcie3x1: pcie@fe270000 { + compatible = "rockchip,rk3568-pcie"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x0 0xf>; + clocks = <&cru ACLK_PCIE30X1_MST>, <&cru ACLK_PCIE30X1_SLV>, + <&cru ACLK_PCIE30X1_DBI>, <&cru PCLK_PCIE30X1>, + <&cru CLK_PCIE30X1_AUX_NDFT>; + clock-names = "aclk_mst", "aclk_slv", + "aclk_dbi", "pclk", "aux"; + device_type = "pci"; + interrupts = , + , + , + , + ; + interrupt-names = "sys", "pmc", "msg", "legacy", "err"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie3x1_intc 0>, + <0 0 0 2 &pcie3x1_intc 1>, + <0 0 0 3 &pcie3x1_intc 2>, + <0 0 0 4 &pcie3x1_intc 3>; + linux,pci-domain = <1>; + num-ib-windows = <6>; + num-ob-windows = <2>; + max-link-speed = <3>; + msi-map = <0x0 &gic 0x1000 0x1000>; + num-lanes = <1>; + phys = <&pcie30phy>; + phy-names = "pcie-phy"; + power-domains = <&power RK3568_PD_PIPE>; + reg = <0x3 0xc0400000 0x0 0x00400000>, + <0x0 0xfe270000 0x0 0x00010000>, + <0x3 0x40000000 0x0 0x01000000>; + ranges = <0x01000000 0x0 0x01000000 0x3 0x41000000 0x0 0x00100000>, + <0x02000000 0x0 0x02000000 0x3 0x41100000 0x0 0x3ef00000>; + reg-names = "dbi", "apb", "config"; + resets = <&cru SRST_PCIE30X1_POWERUP>; + reset-names = "pipe"; + /* bifurcation; lane1 when using 1+1 */ + status = "disabled"; + + pcie3x1_intc: legacy-interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = ; + }; + }; + + pcie3x2: pcie@fe280000 { + compatible = "rockchip,rk3568-pcie"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x0 0xf>; + clocks = <&cru ACLK_PCIE30X2_MST>, <&cru ACLK_PCIE30X2_SLV>, + <&cru ACLK_PCIE30X2_DBI>, <&cru PCLK_PCIE30X2>, + <&cru CLK_PCIE30X2_AUX_NDFT>; + clock-names = "aclk_mst", "aclk_slv", + "aclk_dbi", "pclk", "aux"; + device_type = "pci"; + interrupts = , + , + , + , + ; + interrupt-names = "sys", "pmc", "msg", "legacy", "err"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie3x2_intc 0>, + <0 0 0 2 &pcie3x2_intc 1>, + <0 0 0 3 &pcie3x2_intc 2>, + <0 0 0 4 &pcie3x2_intc 3>; + linux,pci-domain = <2>; + num-ib-windows = <6>; + num-ob-windows = <2>; + max-link-speed = <3>; + msi-map = <0x0 &gic 0x2000 0x1000>; + num-lanes = <2>; + phys = <&pcie30phy>; + phy-names = "pcie-phy"; + power-domains = <&power RK3568_PD_PIPE>; + reg = <0x3 0xc0800000 0x0 0x00400000>, + <0x0 0xfe280000 0x0 0x00010000>, + <0x3 0x80000000 0x0 0x01000000>; + ranges = <0x01000000 0x0 0x01000000 0x3 0x81000000 0x0 0x00100000>, + <0x02000000 0x0 0x02000000 0x3 0x81100000 0x0 0x3ef00000>; + reg-names = "dbi", "apb", "config"; + resets = <&cru SRST_PCIE30X2_POWERUP>; + reset-names = "pipe"; + /* bifurcation; lane0 when using 1+1 */ + status = "disabled"; + + pcie3x2_intc: legacy-interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = ; + }; + }; + gmac0: ethernet@fe2a0000 { compatible = "rockchip,rk3568-gmac", "snps,dwmac-4.20a"; reg = <0x0 0xfe2a0000 0x0 0x10000>;