From patchwork Fri May 20 09:41:50 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Herve Codina X-Patchwork-Id: 12856569 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 26C12C433F5 for ; Fri, 20 May 2022 09:42:32 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1347825AbiETJmZ (ORCPT ); Fri, 20 May 2022 05:42:25 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:33806 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1347784AbiETJmY (ORCPT ); Fri, 20 May 2022 05:42:24 -0400 Received: from relay5-d.mail.gandi.net (relay5-d.mail.gandi.net [217.70.183.197]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 4DD5C1498DD; Fri, 20 May 2022 02:42:19 -0700 (PDT) Received: (Authenticated sender: herve.codina@bootlin.com) by mail.gandi.net (Postfix) with ESMTPA id 01CED1C000D; Fri, 20 May 2022 09:42:15 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1653039738; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=UkENKga2piTorYviraVnH7jRSnL6Crtq1ti3k91LTnI=; b=MXcqokgbm0v4Y8RI0Esjs8gwGTTatIgOEYJUn5SMvIrvX+eK93wM6ZqgsbpBrINwne0rd5 haI5MIShhtjH0CIjGfcZz3lh7iErNnZ58TwwOH52AdiGw5I/Zd1bYxwATSxhFNzGmlOW/A YimePu0l/zgtEXgjnt7Umbm/T7uduNxv+04ztUzKTI+SujAldiRoZL+JRfDAJL8VUrStzH ZaBJpfhZf+Z/FYtz6kCS2gUQXmbVC8Vh0uch5CIvn3ZVIUBvWNKnzEaW/2m865zz6n179H bHW/OdsmW+2Nr3miHOU5rXCT/RSXrD1TlP7g1sEmmqNhzCJW6nhXTtK9139zYg== From: Herve Codina To: Marek Vasut , Yoshihiro Shimoda , Bjorn Helgaas , Rob Herring , Krzysztof Kozlowski , Geert Uytterhoeven , Magnus Damm , Lorenzo Pieralisi , =?utf-8?q?Krzysztof_Wilczy?= =?utf-8?q?=C5=84ski?= Cc: Rob Herring , linux-pci@vger.kernel.org, linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Sergey Shtylyov , Thomas Petazzoni , Clement Leger , Miquel Raynal , Herve Codina Subject: [PATCH v6 1/6] dt-bindings: PCI: pci-rcar-gen2: Convert bindings to json-schema Date: Fri, 20 May 2022 11:41:50 +0200 Message-Id: <20220520094155.313784-2-herve.codina@bootlin.com> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220520094155.313784-1-herve.codina@bootlin.com> References: <20220520094155.313784-1-herve.codina@bootlin.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-pci@vger.kernel.org Convert Renesas PCI bridge bindings documentation to json-schema. Signed-off-by: Herve Codina Reviewed-by: Rob Herring Reviewed-by: Geert Uytterhoeven --- .../devicetree/bindings/pci/pci-rcar-gen2.txt | 84 ---------- .../bindings/pci/renesas,pci-rcar-gen2.yaml | 156 ++++++++++++++++++ 2 files changed, 156 insertions(+), 84 deletions(-) delete mode 100644 Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt create mode 100644 Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.yaml diff --git a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt deleted file mode 100644 index aeba38f0a387..000000000000 --- a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt +++ /dev/null @@ -1,84 +0,0 @@ -Renesas AHB to PCI bridge -------------------------- - -This is the bridge used internally to connect the USB controllers to the -AHB. There is one bridge instance per USB port connected to the internal -OHCI and EHCI controllers. - -Required properties: -- compatible: "renesas,pci-r8a7742" for the R8A7742 SoC; - "renesas,pci-r8a7743" for the R8A7743 SoC; - "renesas,pci-r8a7744" for the R8A7744 SoC; - "renesas,pci-r8a7745" for the R8A7745 SoC; - "renesas,pci-r8a7790" for the R8A7790 SoC; - "renesas,pci-r8a7791" for the R8A7791 SoC; - "renesas,pci-r8a7793" for the R8A7793 SoC; - "renesas,pci-r8a7794" for the R8A7794 SoC; - "renesas,pci-rcar-gen2" for a generic R-Car Gen2 or - RZ/G1 compatible device. - - - When compatible with the generic version, nodes must list the - SoC-specific version corresponding to the platform first - followed by the generic version. - -- reg: A list of physical regions to access the device: the first is - the operational registers for the OHCI/EHCI controllers and the - second is for the bridge configuration and control registers. -- interrupts: interrupt for the device. -- clocks: The reference to the device clock. -- bus-range: The PCI bus number range; as this is a single bus, the range - should be specified as the same value twice. -- #address-cells: must be 3. -- #size-cells: must be 2. -- #interrupt-cells: must be 1. -- interrupt-map: standard property used to define the mapping of the PCI - interrupts to the GIC interrupts. -- interrupt-map-mask: standard property that helps to define the interrupt - mapping. - -Optional properties: -- dma-ranges: a single range for the inbound memory region. If not supplied, - defaults to 1GiB at 0x40000000. Note there are hardware restrictions on the - allowed combinations of address and size. - -Example SoC configuration: - - pci0: pci@ee090000 { - compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2"; - clocks = <&mstp7_clks R8A7790_CLK_EHCI>; - reg = <0x0 0xee090000 0x0 0xc00>, - <0x0 0xee080000 0x0 0x1100>; - interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - - bus-range = <0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>; - interrupt-map-mask = <0xff00 0 0 0x7>; - interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH - 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH - 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>; - - usb@1,0 { - reg = <0x800 0 0 0 0>; - phys = <&usb0 0>; - phy-names = "usb"; - }; - - usb@2,0 { - reg = <0x1000 0 0 0 0>; - phys = <&usb0 0>; - phy-names = "usb"; - }; - }; - -Example board setup: - -&pci0 { - status = "okay"; - pinctrl-0 = <&usb0_pins>; - pinctrl-names = "default"; -}; diff --git a/Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.yaml b/Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.yaml new file mode 100644 index 000000000000..494eb975c146 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/renesas,pci-rcar-gen2.yaml @@ -0,0 +1,156 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/renesas,pci-rcar-gen2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas AHB to PCI bridge + +maintainers: + - Marek Vasut + - Yoshihiro Shimoda + +description: | + This is the bridge used internally to connect the USB controllers to the + AHB. There is one bridge instance per USB port connected to the internal + OHCI and EHCI controllers. + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,pci-r8a7742 # RZ/G1H + - renesas,pci-r8a7743 # RZ/G1M + - renesas,pci-r8a7744 # RZ/G1N + - renesas,pci-r8a7745 # RZ/G1E + - renesas,pci-r8a7790 # R-Car H2 + - renesas,pci-r8a7791 # R-Car M2-W + - renesas,pci-r8a7793 # R-Car M2-N + - renesas,pci-r8a7794 # R-Car E2 + - const: renesas,pci-rcar-gen2 # R-Car Gen2 and RZ/G1 + + reg: + items: + - description: Operational registers for the OHCI/EHCI controllers. + - description: Bridge configuration and control registers. + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Device clock + + clock-names: + items: + - const: pclk + + resets: + maxItems: 1 + + power-domains: + maxItems: 1 + + bus-range: + description: | + The PCI bus number range; as this is a single bus, the range + should be specified as the same value twice. + + dma-ranges: + description: | + A single range for the inbound memory region. If not supplied, + defaults to 1GiB at 0x40000000. Note there are hardware restrictions on + the allowed combinations of address and size. + maxItems: 1 + +patternProperties: + 'usb@[0-1],0': + type: object + + description: + This a USB controller PCI device + + properties: + reg: + description: + Identify the correct bus, device and function number in the + form . + + items: + minItems: 5 + maxItems: 5 + + phys: + description: + Reference to the USB phy + maxItems: 1 + + phy-names: + maxItems: 1 + + required: + - reg + - phys + - phy-names + + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-map + - interrupt-map-mask + - clocks + - resets + - power-domains + - bus-range + - "#address-cells" + - "#size-cells" + - "#interrupt-cells" + +unevaluatedProperties: false + +examples: + - | + #include + #include + #include + + pci@ee090000 { + compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2"; + device_type = "pci"; + reg = <0xee090000 0xc00>, + <0xee080000 0x1100>; + clocks = <&cpg CPG_MOD 703>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 703>; + interrupts = ; + + bus-range = <0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee080000 0xee080000 0 0x00010000>; + dma-ranges = <0x42000000 0 0x40000000 0x40000000 0 0x40000000>; + interrupt-map-mask = <0xf800 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + + usb@1,0 { + reg = <0x800 0 0 0 0>; + phys = <&usb0 0>; + phy-names = "usb"; + }; + + usb@2,0 { + reg = <0x1000 0 0 0 0>; + phys = <&usb0 0>; + phy-names = "usb"; + }; + };