@@ -24,6 +24,7 @@ properties:
compatible:
enum:
- nvidia,tegra194-pcie
+ - nvidia,tegra234-pcie
reg:
items:
@@ -92,7 +93,8 @@ properties:
A phandle to the node that controls power to the respective PCIe
controller and a specifier name for the PCIe controller.
- specifiers are defined in "include/dt-bindings/power/tegra194-powergate.h" file.
+ Tegra194 specifiers are defined in "include/dt-bindings/power/tegra194-powergate.h" file.
+ Tegra234 specifiers are defined in "include/dt-bindings/power/tegra234-powergate.h" file.
interconnects:
items:
@@ -112,17 +114,34 @@ properties:
Must contain a pair of phandle to BPMP controller node followed by
controller ID. Following are the controller IDs for each controller:
+ Tegra194
+
0: C0
1: C1
2: C2
3: C3
4: C4
5: C5
+
+ Tegra234
+
+ 0 : C0
+ 1 : C1
+ 2 : C2
+ 3 : C3
+ 4 : C4
+ 5 : C5
+ 6 : C6
+ 7 : C7
+ 8 : C8
+ 9 : C9
+ 10: C10
+
items:
- items:
- description: phandle to BPMP controller node
- description: PCIe controller ID
- maximum: 5
+ maximum: 10
nvidia,update-fc-fixup:
description: |
@@ -131,6 +150,8 @@ properties:
of the following conditions thereby enabling root port to exchange
optimum number of FC (Flow Control) credits with downstream devices:
+ NOTE:- This is applicable only for Tegra194.
+
1. If C0/C4/C5 run at x1/x2 link widths (irrespective of speed and MPS)
2. If C0/C1/C2/C3/C4/C5 operate at their respective max link widths and
a) speed is Gen-2 and MPS is 256B
@@ -162,6 +183,22 @@ properties:
if the platform has one such slot. (Ex:- x16 slot owned by C5 controller
in p2972-0000 platform).
+ nvidia,enable-srns:
+ description: |
+ This boolean property needs to be present if the controller is configured
+ to operate in SRNS (Separate Reference Clocks with No Spread-Spectrum Clocking).
+ NOTE:- This is applicable only for Tegra234.
+
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ nvidia,enable-ext-refclk:
+ description: |
+ This boolean property needs to be present if the controller is configured
+ to use the reference clocking coming in from an external clock source instead of
+ using the internal clock source.
+
+ $ref: /schemas/types.yaml#/definitions/flag
+
allOf:
- $ref: /schemas/pci/snps,dw-pcie.yaml#
@@ -249,3 +286,64 @@ examples:
phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
};
};
+
+ - |
+ #include <dt-bindings/clock/tegra234-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/tegra234-powergate.h>
+ #include <dt-bindings/reset/tegra234-reset.h>
+
+ bus@0 {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0x8 0x0>;
+
+ pcie@14160000 {
+ compatible = "nvidia,tegra234-pcie";
+ power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX4BB>;
+ reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K) */
+ <0x00 0x36000000 0x0 0x00040000>, /* configuration space (256K) */
+ <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */
+ <0x00 0x36080000 0x0 0x00040000>; /* DBI reg space (256K) */
+ reg-names = "appl", "config", "atu_dma", "dbi";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ num-lanes = <4>;
+ num-viewport = <8>;
+ linux,pci-domain = <4>;
+
+ clocks = <&bpmp TEGRA234_CLK_PEX0_C4_CORE>;
+ clock-names = "core";
+
+ resets = <&bpmp TEGRA234_RESET_PEX0_CORE_4_APB>,
+ <&bpmp TEGRA234_RESET_PEX0_CORE_4>;
+ reset-names = "apb", "core";
+
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+ <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+ interrupt-names = "intr", "msi";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+
+ nvidia,bpmp = <&bpmp 4>;
+
+ nvidia,aspm-cmrt-us = <60>;
+ nvidia,aspm-pwr-on-t-us = <20>;
+ nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+ bus-range = <0x0 0xff>;
+ ranges = <0x43000000 0x21 0x40000000 0x21 0x40000000 0x2 0xe8000000>, /* prefetchable */
+ <0x02000000 0x0 0x40000000 0x24 0x28000000 0x0 0x08000000>, /* non-prefetchable */
+ <0x01000000 0x0 0x36100000 0x00 0x36100000 0x0 0x00100000>; /* downstream I/O */
+
+ vddio-pex-ctl-supply = <&p3701_vdd_AO_1v8>;
+
+ phys = <&p2u_hsio_4>, <&p2u_hsio_5>, <&p2u_hsio_6>,
+ <&p2u_hsio_7>;
+ phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3";
+ };
+ };